From f29eb0598f62fc3b5f09f2de5a89c0437c6164d9 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Tue, 21 Jan 2020 18:52:40 +0000 Subject: gentoo resync : 21.01.2020 --- .../mysql-connector-c++-8.0.19-fix-build.patch | 307 +++++++++++++++++++++ 1 file changed, 307 insertions(+) create mode 100644 dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch (limited to 'dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch') diff --git a/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch b/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch new file mode 100644 index 000000000000..b8976199afc5 --- /dev/null +++ b/dev-db/mysql-connector-c++/files/mysql-connector-c++-8.0.19-fix-build.patch @@ -0,0 +1,307 @@ +--- a/CMakeLists.txt ++++ b/CMakeLists.txt +@@ -475,7 +475,7 @@ set_target_properties(connector PROPERTIES + + + install(TARGETS connector +- CONFIGURATIONS Release RelWithDebInfo ++ CONFIGURATIONS Release RelWithDebInfo Gentoo + ARCHIVE DESTINATION "${INSTALL_LIB_DIR_STATIC}" COMPONENT XDevAPIDev + RUNTIME DESTINATION "${INSTALL_LIB_DIR}" COMPONENT XDevAPIDll + LIBRARY DESTINATION "${INSTALL_LIB_DIR}" COMPONENT XDevAPIDll +--- a/cdk/cmake/DepFindProtobuf.cmake ++++ b/cdk/cmake/DepFindProtobuf.cmake +@@ -48,229 +48,7 @@ if(TARGET Protobuf::pb) + return() + endif() + +-message(STATUS "Setting up Protobuf.") +- +-set(PB_SOURCE_DIR "${PROJECT_SOURCE_DIR}/protobuf") +-set(PB_BINARY_DIR "${PROJECT_BINARY_DIR}/protobuf") +-set(config_stamp "${PB_BINARY_DIR}/config.stamp") +-set(build_stamp "${PB_BINARY_DIR}/build.stamp") +- +- +-# +-# Pick build configuration for the protobuf build. Normally we build using the +-# same build configuration that is used for building CDK (Release/Debug/etc.). +-# But we also support building CDK under non-standard build configuration +-# named 'Static' (this is a dirty trick we use to simplify building our MSIs). +-# Since protobuf does not know 'Static' build configuration, we build protobuf +-# under 'Release' configuration in that case. +-# +-# We need to handle two cases. For some build systems, like Makefiles, +-# the build configuration is specified at cmake time using CMAKE_BUILD_TYPE +-# variable. In that case we also set it during protobuf build configuration. +-# Another case is a multi-configuration build system like MSVC. In this case +-# we use generator expression to pick correct configuration when the build +-# command is invoked below. +-# +- +-set(build_type) +-if(CMAKE_BUILD_TYPE) +- if(CMAKE_BUILD_TYPE MATCHES "[Ss][Tt][Aa][Tt][Ii][Cc]") +- set(set_build_type -DCMAKE_BUILD_TYPE=Release) +- else() +- set(set_build_type -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE}) +- endif() +-endif() +- +-set(CONFIG_EXPR +- $<$:Release>$<$>:$> +-) +- +-set(set_arch) +-if(CMAKE_GENERATOR_PLATFORM) +- set(set_arch -A ${CMAKE_GENERATOR_PLATFORM}) +-endif() +- +-set(set_toolset) +-if(CMAKE_GENERATOR_TOOLSET) +- set(set_toolset -T ${CMAKE_GENERATOR_TOOLSET}) +-endif() +- +-if(NOT EXISTS "${PB_BINARY_DIR}/exports.cmake") +- +- message("==== Configuring Protobuf build using cmake generator: ${CMAKE_GENERATOR} ${set_arch} ${set_toolset}") +- +- file(REMOVE "${PB_BINARY_DIR}/CMakeCache.txt") +- file(MAKE_DIRECTORY "${PB_BINARY_DIR}") +- +- # Dirty trick to speed up cmake set up time. +- #file( +- # COPY "${CMAKE_BINARY_DIR}/CMakeFiles/${CMAKE_VERSION}" +- # DESTINATION "${PB_BINARY_DIR}/CMakeFiles" +- #) +- +- execute_process( +- COMMAND ${CMAKE_COMMAND} +- -G "${CMAKE_GENERATOR}" +- ${set_arch} +- ${set_toolset} +- ${set_build_type} +- -DSTATIC_MSVCRT=${STATIC_MSVCRT} +- -DCMAKE_POSITION_INDEPENDENT_CODE=${CMAKE_POSITION_INDEPENDENT_CODE} +- -DCMAKE_CXX_COMPILER=${CMAKE_CXX_COMPILER} +- -DCMAKE_CXX_FLAGS=${CMAKE_CXX_FLAGS} +- -DCMAKE_CXX_FLAGS_DEBUG=${CMAKE_CXX_FLAGS_DEBUG} +- -DCMAKE_CXX_FLAGS_RELEASE=${CMAKE_CXX_FLAGS_RELEASE} +- -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=${CMAKE_CXX_FLAGS_RELWITHDEBINFO} +- -DCMAKE_CXX_FLAGS_MINSIZEREL=${CMAKE_CXX_FLAGS_MINSIZEREL} +- -DCMAKE_STATIC_LINKER_FLAGS=${CMAKE_STATIC_LINKER_FLAGS} +- ${PB_SOURCE_DIR} +- WORKING_DIRECTORY ${PB_BINARY_DIR} +- RESULT_VARIABLE protobuf_config +- ) +- +- if(protobuf_config) +- message(FATAL_ERROR "Could not configure Protobuf build: ${protobuf_config}") +- endif() +- +- message("==== Protobuf build configured.") +- +-endif() +- +- +-include(${PB_BINARY_DIR}/exports.cmake) +- +-# +-# Protobuf library targets imported above (pb_protobuf +-# and pb_protobuf-lite) are local to the directory from which +-# they were imported. This is not good if cdk is used as +-# a sub-project of a parent project, because the parent project +-# must have access to these targets. +-# +-# For that reason below we create global protobuf/protobuf-lite targets +-# and copy their locations from the imported targets. +-# +-# Note: we can't use ALIAS library because it does not work with imported +-# targets +-# +- +-add_library(Protobuf::pb-full STATIC IMPORTED GLOBAL) +-add_library(Protobuf::pb-lite STATIC IMPORTED GLOBAL) +-add_executable(Protobuf::protoc IMPORTED GLOBAL) +- +-set(TGT_protobuf Protobuf::pb-full) +-set(TGT_protobuf-lite Protobuf::pb-lite) +-set(TGT_protoc Protobuf::protoc) +- +-foreach(tgt protobuf protobuf-lite protoc) +- +- #message("processing: ${tgt}") +- +- set(loc_list) +- +- foreach(CONF NOCONFIG DEBUG RELEASE MINSIZEREL RELWITHDEBINFO) +- +- #message("- CONF: ${CONF}") +- +- get_target_property(LOC pb_${tgt} IMPORTED_LOCATION_${CONF}) +- +- if(LOC) +- +- #message("- setting imported location to: ${LOC}") +- list(APPEND loc_list "${LOC}") +- +- set_target_properties(${TGT_${tgt}} PROPERTIES +- IMPORTED_LOCATION_${CONF} "${LOC}" +- ) +- +- set_property(TARGET ${TGT_${tgt}} APPEND PROPERTY +- IMPORTED_CONFIGURATIONS ${CONF} +- ) +- +- endif() +- +- endforeach(CONF) +- +- # +- # To support 'Static' build configuration the targets imported from the +- # Protobuf project need to have IMPORTED_LOCATION_STATIC defined. We use +- # 'Release' locations as Protobuf is built using 'Release' configuration in +- # that case. +- # +- +- get_target_property(LOC ${TGT_${tgt}} IMPORTED_LOCATION_RELEASE) +- set_property(TARGET ${TGT_${tgt}} PROPERTY IMPORTED_LOCATION_STATIC ${LOC}) +- +-endforeach(tgt) +- +- +-#message("Protobuf include path: ${PROTOBUF_INCLUDE_DIR}") +-set(PROTOBUF_INCLUDE_DIR ${PROTOBUF_INCLUDE_DIR} CACHE INTERNAL "") +- +-set_target_properties(Protobuf::pb-lite PROPERTIES +- INTERFACE_INCLUDE_DIRECTORIES "${PROTOBUF_INCLUDE_DIR}" +-) +- +-set_target_properties(Protobuf::pb-full PROPERTIES +- INTERFACE_LINK_LIBRARIES Protobuf::pb-lite +-) +- +-# On UNIX Protobuf uses pthread library +-if(UNIX) +- set_property(TARGET Protobuf::pb-lite APPEND PROPERTY +- INTERFACE_LINK_LIBRARIES pthread +- ) +-endif() +- +-# +-# Note: This is needed to correctly compile headers generated by protobuf +-# with sunpro compiler. +-# +- +-if(SUNPRO) +- set_property(TARGET Protobuf::pb-lite APPEND PROPERTY +- INTERFACE_COMPILE_DEFINITIONS SOLARIS_64BIT_ENABLED +- ) +-endif() +- +-# +-# Try using parallel builds for protobuf. +-# +- +-include(ProcessorCount) +-ProcessorCount(N) +- +-MESSAGE("Processor Count: ${N}") +- +-set(opt_build) +-set(opt_tool) +-if(NOT N EQUAL 0) +- if(NOT CMAKE_VERSION VERSION_LESS 3.12) +- set(opt_build --parallel ${N}) +- elseif(CMAKE_MAKE_PROGRAM MATCHES "make") +- set(opt_tool -j${N}) +- endif() +-endif() +- +-add_custom_command(OUTPUT "${build_stamp}" +- COMMAND ${CMAKE_COMMAND} --build . ${opt_build} --config ${CONFIG_EXPR} -- ${opt_tool} +- COMMAND ${CMAKE_COMMAND} -E touch "${build_stamp}" +- WORKING_DIRECTORY "${PB_BINARY_DIR}" +- COMMENT "Building protobuf" +-) +- +-add_custom_target(build_protobuf +- SOURCES "${build_stamp}" +-) +- +-set_target_properties(build_protobuf PROPERTIES FOLDER "Misc") +- +-add_dependencies(Protobuf::pb-full build_protobuf) +-add_dependencies(Protobuf::pb-lite build_protobuf) +-add_dependencies(Protobuf::protoc build_protobuf) +- +-# TODO: Handle lite/full version +- +- ++find_package(Protobuf REQUIRED) + + # Standard PROTOBUF_GENERATE_CPP modified to our usage + +@@ -299,11 +77,11 @@ function(mysqlx_protobuf_generate_cpp SRCS HDRS) + "${CMAKE_CURRENT_BINARY_DIR}/protobuf/${FIL_WE}.pb.h" + COMMAND ${CMAKE_COMMAND} + -E make_directory "${CMAKE_CURRENT_BINARY_DIR}/protobuf" +- COMMAND Protobuf::protoc ++ COMMAND ${Protobuf_PROTOC_EXECUTABLE} + ARGS --cpp_out "${CMAKE_CURRENT_BINARY_DIR}/protobuf" + -I ${ABS_PATH} ${ABS_FIL} +- --proto_path=${PROJECT_SOURCE_DIR}/protobuf/protobuf-3.6.1/src +- DEPENDS ${ABS_FIL} #${PROTOBUF_PROTOC_EXECUTABLE} ++ --proto_path=${Protobuf_INCLUDE_DIR} ++ DEPENDS ${ABS_FIL} #${Protobuf_PROTOC_EXECUTABLE} + COMMENT "Running C++ protocol buffer compiler on ${FIL}" + VERBATIM + ) +--- a/cdk/core/CMakeLists.txt ++++ b/cdk/core/CMakeLists.txt +@@ -44,7 +44,7 @@ add_library(cdk STATIC ${cdk_sources} ${HEADERS}) + + target_link_libraries(cdk + PUBLIC cdk_mysqlx cdk_parser +- PRIVATE Protobuf::pb-lite # required by codecc.cc ++ PRIVATE protobuf # required by codecc.cc + ) + + add_coverage(cdk) +--- a/cdk/protocol/mysqlx/CMakeLists.txt ++++ b/cdk/protocol/mysqlx/CMakeLists.txt +@@ -126,11 +126,7 @@ target_include_directories(cdk_proto_mysqlx PRIVATE + ${CMAKE_CURRENT_BINARY_DIR} + ) + +-if(use_full_protobuf) +- target_link_libraries(cdk_proto_mysqlx PRIVATE Protobuf::pb-full) +-else() +- target_link_libraries(cdk_proto_mysqlx PRIVATE Protobuf::pb-lite) +-endif() ++target_link_libraries(cdk_proto_mysqlx PRIVATE protobuf) + + target_link_libraries(cdk_proto_mysqlx PRIVATE cdk_foundation) + +--- a/jdbc.cmake ++++ b/jdbc.cmake +@@ -66,7 +66,7 @@ if(MYSQL_CONFIG_EXECUTABLE) + list(APPEND jdbc_cmake_opts -DMYSQL_CONFIG_EXECUTABLE=${MYSQL_CONFIG_EXECUTABLE}) + endif() + +-list(APPEND jdbc_cmake_opts -DMYSQLCLIENT_STATIC_LINKING=ON) ++list(APPEND jdbc_cmake_opts -DMYSQLCLIENT_STATIC_LINKING=OFF) + + if(CMAKE_BUILD_TYPE) + if(CMAKE_BUILD_TYPE MATCHES "[Ss][Tt][Aa][Tt][Ii][Cc]") +--- a/jdbc/CMakeLists.txt ++++ b/jdbc/CMakeLists.txt +@@ -272,7 +272,7 @@ set_target_properties(connector-jdbc + + + install(TARGETS connector-jdbc +- CONFIGURATIONS Release RelWithDebInfo ++ CONFIGURATIONS Release RelWithDebInfo Gentoo + ARCHIVE DESTINATION "${INSTALL_LIB_DIR_STATIC}" COMPONENT JDBCDev + RUNTIME DESTINATION "${INSTALL_LIB_DIR}" COMPONENT JDBCDll + LIBRARY DESTINATION "${INSTALL_LIB_DIR}" COMPONENT JDBCDll -- cgit v1.2.3