From e748ba9741f6540f4675c23e3e37b73e822c13a4 Mon Sep 17 00:00:00 2001
From: V3n3RiX <venerix@redcorelinux.org>
Date: Mon, 31 May 2021 20:59:14 +0100
Subject: gentoo resync : 31.05.2021

---
 net-print/hplip/Manifest                |   4 +-
 net-print/hplip/hplip-3.20.11-r1.ebuild | 287 --------------------------------
 net-print/hplip/hplip-3.20.11-r2.ebuild | 287 ++++++++++++++++++++++++++++++++
 net-print/hplip/hplip-3.21.2-r1.ebuild  | 287 ++++++++++++++++++++++++++++++++
 net-print/hplip/hplip-3.21.2.ebuild     | 287 --------------------------------
 5 files changed, 576 insertions(+), 576 deletions(-)
 delete mode 100644 net-print/hplip/hplip-3.20.11-r1.ebuild
 create mode 100644 net-print/hplip/hplip-3.20.11-r2.ebuild
 create mode 100644 net-print/hplip/hplip-3.21.2-r1.ebuild
 delete mode 100644 net-print/hplip/hplip-3.21.2.ebuild

(limited to 'net-print/hplip')

diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index 7aada167a326..79a31480b810 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -2,6 +2,6 @@ DIST hplip-3.20.11-patches-2.tar.xz 18140 BLAKE2B a0271d0c6fcfaa53c68ab00c4c6cfc
 DIST hplip-3.20.11.tar.gz 26301441 BLAKE2B 14667f33cc50b2887c8434ada7327a82e16b9acbcdc75d3a50c0261ec9aef3fada9be81e6c0cbdfb4d29914630799c6406893644386db99c0ce86245cca38cc2 SHA512 f583fb4140a29c5e21956c3e51fe3620baa65d33b40447af419d7fc61473a1148a1873216a84e89be785b155ee8e9aebd5e3eb19d2ded82b8415b1a35de1b55d
 DIST hplip-3.21.2-patches-1.tar.xz 19212 BLAKE2B c733651a7831b54bec13b5f037b0f00ab53dbec193f73964d7bb3f8ee4e1dcd02a02dd793d7fc322fe34085bbe5ec281076757d8882b4eb7f85fd0e45b1c3200 SHA512 23c696b111fe098358eb609e64cedc2ee85f4a1dac8bce895e3c6bbcb96e62dd5d2d3f1bcc9d12d20ccd6717b23f92b3016c926df7c73f50ba9425542d08ed29
 DIST hplip-3.21.2.tar.gz 27014784 BLAKE2B b6a13f0d48f3052ad09b419dbe9b68605c85ed8f1bfb6f1ec9720b9aace4a1c6d17a933b0d55ba20dbbc3d389ba1d2751dbd9a71d364ad2e2e1617cd7613dc2d SHA512 73ba37275cfe34a58b81c9656514e15da67c1a69af5471ad132a1538d324efe640879cb7e60c359915607e41b63e653e7ae757661e553235f6e83e378ab46474
-EBUILD hplip-3.20.11-r1.ebuild 8296 BLAKE2B 0a59bb500e5357ee51855fc2bfa4efb9e9737ea0cc757d24dc6209b689c412791c7d073821c1c5a0e26784417eaaa91d85e9609cfa039c03b29bf011fc7ed171 SHA512 4294f99cfcc98c44bfc6aec76cd11edcabd8e7aa4743d5543ce09ed8740918403503d67a655d834095db30265fc56a03f7bd1d3359ca1ab59ff6917303d397a9
-EBUILD hplip-3.21.2.ebuild 8301 BLAKE2B cc23bec37e9085885ddb6008e152109f9be45e0957a234b3b8a2ca92bb64a7e70a9d30060c8919467f4a625700fc49e3d347464633e3d35d2677c14150059c44 SHA512 8704e10f26fa375a701b14c3c2c300c7ac4e25025406bfc47dbeb8b745798c3624ac21fc50f17349c74876b9789f8de99810dc5b8d5b06e1a570a9ff197b7603
+EBUILD hplip-3.20.11-r2.ebuild 8281 BLAKE2B 73698ce5464b60119afa57056b3d8e596ec2e87f68909a8a73d81ca997a8733721f47113afda7676d097f8d04ad79b645ca159a23956c9b1ddcb953a4d211dfe SHA512 a6fc57891971aa4f9ce2ac15fa82abf38d07a1f15041a45870c2039a98d7796d2d51bb3566d514b0509d25f9a16ec28ae1894c39b784f102ed5c41288b64f9cd
+EBUILD hplip-3.21.2-r1.ebuild 8286 BLAKE2B 8c33bb775ed150bde68f2f70b7bc9b720798462a387a4758be62544bcf5ab20cdf2786882767f11e158fc5a8a1ee5977b08093ba2ef0902a74c8996ab0bccabe SHA512 6e75dcb2676acc755ac796f1c32ac939c54c4b42a4d342c20c65d62a1bb83c608a97ba5925335f1167365839abf5de8820e3ec9bd8d660800ee28964bbae819e
 MISC metadata.xml 1910 BLAKE2B fd9fc7a40bd2bb877e7b4e26104df247dc8c7aa5cbd7211f5d489ec889834aa64fff20d6624f3c8b3e1e4428704cb7f2eb4d1bffc1c6fb15f15b05fd422297e2 SHA512 022854843c9ae373aed3ebd3879c9f1312773dea5dca15c85fb839ff067ea5599532201fa51d9e91ec18b0be1773e2ad544cd4e5697eb9c91be22d8d9352d7ef
diff --git a/net-print/hplip/hplip-3.20.11-r1.ebuild b/net-print/hplip/hplip-3.20.11-r1.ebuild
deleted file mode 100644
index f1f9e876d5e0..000000000000
--- a/net-print/hplip/hplip-3.20.11-r1.ebuild
+++ /dev/null
@@ -1,287 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PYTHON_COMPAT=( python3_{7,8} )
-PYTHON_REQ_USE="threads(+),xml"
-
-# 14 and 15 spit out a lot of warnings about subdirs
-WANT_AUTOMAKE="1.13"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
-		https://dev.gentoo.org/~billie/distfiles/${PN}-3.20.11-patches-2.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 arm arm64 ppc ppc64 x86"
-
-IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-COMMON_DEPEND="
-	net-print/cups
-	sys-apps/dbus
-	virtual/jpeg:0
-	hpijs? ( net-print/cups-filters[foomatic] )
-	!libusb0? ( virtual/libusb:1 )
-	libusb0? ( virtual/libusb:0 )
-	${PYTHON_DEPS}
-	!minimal? (
-		scanner? (
-			media-gfx/sane-backends
-		)
-		snmp? (
-			dev-libs/openssl:0=
-			net-analyzer/net-snmp:=
-			$(python_gen_cond_dep 'net-dns/avahi[dbus,${PYTHON_MULTI_USEDEP}]')
-		)
-	)
-"
-BDEPEND="
-	virtual/pkgconfig
-"
-DEPEND="
-	${COMMON_DEPEND}
-"
-RDEPEND="
-	${COMMON_DEPEND}
-	app-text/ghostscript-gpl
-	!minimal? (
-		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
-		kernel_linux? ( virtual/udev )
-		$(python_gen_cond_dep '
-			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
-			dev-python/distro[${PYTHON_MULTI_USEDEP}]
-			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
-			qt5? (
-				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
-				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
-			)
-			scanner? (
-				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
-				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
-				X? (
-					|| (
-						kde? ( kde-misc/skanlite )
-						media-gfx/xsane
-						media-gfx/sane-frontends
-					)
-				)
-			)
-		')
-	)
-	policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-PATCHES=(
-	"${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-"
-
-pkg_setup() {
-	python-single-r1_pkg_setup
-
-	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
-	use parport && linux-info_pkg_setup
-
-	if use minimal ; then
-		ewarn "Installing driver portions only, make sure you know what you are doing."
-		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
-		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
-		ewarn "This also disables fax, network, scanner and gui support!"
-	fi
-
-	if ! use hpcups && ! use hpijs ; then
-		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
-		ewarn "which is probably not what you want."
-		ewarn "You will almost certainly not be able to print."
-	fi
-}
-
-src_prepare() {
-	default
-
-	python_fix_shebang .
-
-	# Make desktop files follow the specification
-	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Encoding=.*/d' hplip.desktop.in || die
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Version=.*/d' \
-		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
-	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
-	# https://bugs.launchpad.net/hplip/+bug/500086
-	local udevdir=$(get_udevdir)
-	sed -i -e "s|/etc/udev|${udevdir}|g" \
-		$(find . -type f -exec grep -l /etc/udev {} +) || die
-
-	# Force recognition of Gentoo distro by hp-check
-	sed -i \
-		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
-		installer/core_install.py || die
-
-	eautoreconf
-}
-
-src_configure() {
-	local drv_build minimal_build
-
-	if use hpcups ; then
-		drv_build="$(use_enable hpcups hpcups-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-cups-ppd-install"
-			drv_build="${drv_build} --disable-cups-drv-install"
-		else
-			drv_build="${drv_build} --enable-cups-drv-install"
-			drv_build="${drv_build} --disable-cups-ppd-install"
-		fi
-	else
-		drv_build="--disable-hpcups-install"
-		drv_build="${drv_build} --disable-cups-drv-install"
-		drv_build="${drv_build} --disable-cups-ppd-install"
-	fi
-
-	if use hpijs ; then
-		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-foomatic-ppd-install"
-			drv_build="${drv_build} --disable-foomatic-drv-install"
-		else
-			drv_build="${drv_build} --enable-foomatic-drv-install"
-			drv_build="${drv_build} --disable-foomatic-ppd-install"
-		fi
-	else
-		drv_build="${drv_build} --disable-hpijs-install"
-		drv_build="${drv_build} --disable-foomatic-drv-install"
-		drv_build="${drv_build} --disable-foomatic-ppd-install"
-	fi
-
-	if use minimal ; then
-		if use hpijs ; then
-			minimal_build="--enable-hpijs-only-build"
-		else
-			minimal_build="--disable-hpijs-only-build"
-		fi
-		if use hpcups ; then
-			minimal_build="${minimal_build} --enable-hpcups-only-build"
-		else
-			minimal_build="${minimal_build} --disable-hpcups-only-build"
-		fi
-		minimal_build="${minimal_build} --disable-fax-build"
-		minimal_build="${minimal_build} --disable-network-build"
-		minimal_build="${minimal_build} --disable-scan-build"
-		minimal_build="${minimal_build} --disable-gui-build"
-	else
-		if use fax ; then
-			minimal_build="${minimal_build} --enable-fax-build"
-		else
-			minimal_build="${minimal_build} --disable-fax-build"
-		fi
-		if use snmp ; then
-			minimal_build="${minimal_build} --enable-network-build"
-		else
-			minimal_build="${minimal_build} --disable-network-build"
-		fi
-		if use scanner ; then
-			minimal_build="${minimal_build} --enable-scan-build"
-		else
-			minimal_build="${minimal_build} --disable-scan-build"
-		fi
-		if use qt5 ; then
-			minimal_build="${minimal_build} --enable-qt5"
-			minimal_build="${minimal_build} --enable-gui-build"
-		else
-			minimal_build="${minimal_build} --disable-gui-build"
-			minimal_build="${minimal_build} --disable-qt5"
-		fi
-	fi
-
-	# disable class driver for now
-	econf \
-		--disable-class-driver \
-		--disable-foomatic-rip-hplip-install \
-		--disable-cups11-build \
-		--disable-lite-build \
-		--disable-shadow-build \
-		--disable-qt3 \
-		--disable-qt4 \
-		--disable-udev_sysfs_rules \
-		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
-		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
-		--with-docdir=/usr/share/doc/${PF} \
-		--with-htmldir=/usr/share/doc/${PF}/html \
-		--enable-hpps-install \
-		--enable-dbus-build \
-		${drv_build} \
-		${minimal_build} \
-		$(use_enable doc doc-build) \
-		$(use_enable libusb0 libusb01_build) \
-		$(use_enable parport pp-build) \
-		$(use_enable policykit)
-
-	# hpijs ppds are created at configure time but are not installed (3.17.11)
-
-	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
-	# The hpcups driver does not use foomatic-rip
-	#local i
-	#for i in ppd/hpijs/*.ppd.gz ; do
-	#	rm -f ${i}.temp || die
-	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
-	#		gzip > ${i}.temp || die
-	#	mv ${i}.temp ${i} || die
-	#done
-}
-
-src_install() {
-	# Disable parallel install
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
-	emake -j1 DESTDIR="${D}" install
-	einstalldocs
-	# default
-
-	# Installed by sane-backends
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
-	rm -f "${ED}"/etc/sane.d/dll.conf || die
-
-	# Remove desktop and autostart files
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
-	use qt5 || {
-		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
-	}
-
-	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
-	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
-
-	# Remove hal fdi files
-	rm -rf "${ED}"/usr/share/hal || die
-
-	find "${D}" -name '*.la' -delete || die
-
-	python_optimize "${ED}"/usr/share/hplip
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}
diff --git a/net-print/hplip/hplip-3.20.11-r2.ebuild b/net-print/hplip/hplip-3.20.11-r2.ebuild
new file mode 100644
index 000000000000..7d1d95bcb4ea
--- /dev/null
+++ b/net-print/hplip/hplip-3.20.11-r2.ebuild
@@ -0,0 +1,287 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{7,8,9} )
+PYTHON_REQ_USE="threads(+),xml"
+
+# 14 and 15 spit out a lot of warnings about subdirs
+WANT_AUTOMAKE="1.13"
+
+inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
+
+DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
+HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
+		https://dev.gentoo.org/~billie/distfiles/${PN}-3.20.11-patches-2.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 arm arm64 ppc ppc64 x86"
+
+IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
+
+COMMON_DEPEND="
+	net-print/cups
+	sys-apps/dbus
+	virtual/jpeg:0
+	hpijs? ( net-print/cups-filters[foomatic] )
+	!libusb0? ( virtual/libusb:1 )
+	libusb0? ( virtual/libusb:0 )
+	${PYTHON_DEPS}
+	!minimal? (
+		scanner? (
+			media-gfx/sane-backends
+		)
+		snmp? (
+			dev-libs/openssl:0=
+			net-analyzer/net-snmp:=
+			net-dns/avahi[dbus,python,${PYTHON_SINGLE_USEDEP}]
+		)
+	)
+"
+BDEPEND="
+	virtual/pkgconfig
+"
+DEPEND="
+	${COMMON_DEPEND}
+"
+RDEPEND="
+	${COMMON_DEPEND}
+	app-text/ghostscript-gpl
+	!minimal? (
+		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
+		kernel_linux? ( virtual/udev )
+		$(python_gen_cond_dep '
+			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
+			dev-python/distro[${PYTHON_MULTI_USEDEP}]
+			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
+			qt5? (
+				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
+				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
+			)
+			scanner? (
+				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
+				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
+				X? (
+					|| (
+						kde? ( kde-misc/skanlite )
+						media-gfx/xsane
+						media-gfx/sane-frontends
+					)
+				)
+			)
+		')
+	)
+	policykit? ( sys-auth/polkit )
+"
+
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+PATCHES=(
+	"${WORKDIR}/patches"
+)
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
+
+#DISABLE_AUTOFORMATTING="yes"
+DOC_CONTENTS="
+For more information on setting up your printer please take
+a look at the hplip section of the gentoo printing guide:
+https://wiki.gentoo.org/wiki/Printing
+"
+
+pkg_setup() {
+	python-single-r1_pkg_setup
+
+	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
+
+	use parport && linux-info_pkg_setup
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
+		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
+		ewarn "This also disables fax, network, scanner and gui support!"
+	fi
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+	fi
+}
+
+src_prepare() {
+	default
+
+	python_fix_shebang .
+
+	# Make desktop files follow the specification
+	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Encoding=.*/d' hplip.desktop.in || die
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Version=.*/d' \
+		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
+
+	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
+	# https://bugs.launchpad.net/hplip/+bug/500086
+	local udevdir=$(get_udevdir)
+	sed -i -e "s|/etc/udev|${udevdir}|g" \
+		$(find . -type f -exec grep -l /etc/udev {} +) || die
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die
+
+	eautoreconf
+}
+
+src_configure() {
+	local drv_build minimal_build
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install"
+		drv_build="${drv_build} --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	if use minimal ; then
+		if use hpijs ; then
+			minimal_build="--enable-hpijs-only-build"
+		else
+			minimal_build="--disable-hpijs-only-build"
+		fi
+		if use hpcups ; then
+			minimal_build="${minimal_build} --enable-hpcups-only-build"
+		else
+			minimal_build="${minimal_build} --disable-hpcups-only-build"
+		fi
+		minimal_build="${minimal_build} --disable-fax-build"
+		minimal_build="${minimal_build} --disable-network-build"
+		minimal_build="${minimal_build} --disable-scan-build"
+		minimal_build="${minimal_build} --disable-gui-build"
+	else
+		if use fax ; then
+			minimal_build="${minimal_build} --enable-fax-build"
+		else
+			minimal_build="${minimal_build} --disable-fax-build"
+		fi
+		if use snmp ; then
+			minimal_build="${minimal_build} --enable-network-build"
+		else
+			minimal_build="${minimal_build} --disable-network-build"
+		fi
+		if use scanner ; then
+			minimal_build="${minimal_build} --enable-scan-build"
+		else
+			minimal_build="${minimal_build} --disable-scan-build"
+		fi
+		if use qt5 ; then
+			minimal_build="${minimal_build} --enable-qt5"
+			minimal_build="${minimal_build} --enable-gui-build"
+		else
+			minimal_build="${minimal_build} --disable-gui-build"
+			minimal_build="${minimal_build} --disable-qt5"
+		fi
+	fi
+
+	# disable class driver for now
+	econf \
+		--disable-class-driver \
+		--disable-foomatic-rip-hplip-install \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-shadow-build \
+		--disable-qt3 \
+		--disable-qt4 \
+		--disable-udev_sysfs_rules \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--with-docdir=/usr/share/doc/${PF} \
+		--with-htmldir=/usr/share/doc/${PF}/html \
+		--enable-hpps-install \
+		--enable-dbus-build \
+		${drv_build} \
+		${minimal_build} \
+		$(use_enable doc doc-build) \
+		$(use_enable libusb0 libusb01_build) \
+		$(use_enable parport pp-build) \
+		$(use_enable policykit)
+
+	# hpijs ppds are created at configure time but are not installed (3.17.11)
+
+	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
+	# The hpcups driver does not use foomatic-rip
+	#local i
+	#for i in ppd/hpijs/*.ppd.gz ; do
+	#	rm -f ${i}.temp || die
+	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
+	#		gzip > ${i}.temp || die
+	#	mv ${i}.temp ${i} || die
+	#done
+}
+
+src_install() {
+	# Disable parallel install
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
+	emake -j1 DESTDIR="${D}" install
+	einstalldocs
+	# default
+
+	# Installed by sane-backends
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
+	rm -f "${ED}"/etc/sane.d/dll.conf || die
+
+	# Remove desktop and autostart files
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
+	use qt5 || {
+		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
+	}
+
+	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
+	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
+
+	# Remove hal fdi files
+	rm -rf "${ED}"/usr/share/hal || die
+
+	find "${D}" -name '*.la' -delete || die
+
+	python_optimize "${ED}"/usr/share/hplip
+
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+}
diff --git a/net-print/hplip/hplip-3.21.2-r1.ebuild b/net-print/hplip/hplip-3.21.2-r1.ebuild
new file mode 100644
index 000000000000..e2d9b4b7d501
--- /dev/null
+++ b/net-print/hplip/hplip-3.21.2-r1.ebuild
@@ -0,0 +1,287 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{7,8,9} )
+PYTHON_REQ_USE="threads(+),xml"
+
+# 14 and 15 spit out a lot of warnings about subdirs
+WANT_AUTOMAKE="1.13"
+
+inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
+
+DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
+HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
+		https://dev.gentoo.org/~billie/distfiles/${PN}-3.21.2-patches-1.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
+
+IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
+
+COMMON_DEPEND="
+	net-print/cups
+	sys-apps/dbus
+	virtual/jpeg:0
+	hpijs? ( net-print/cups-filters[foomatic] )
+	!libusb0? ( virtual/libusb:1 )
+	libusb0? ( virtual/libusb:0 )
+	${PYTHON_DEPS}
+	!minimal? (
+		scanner? (
+			media-gfx/sane-backends
+		)
+		snmp? (
+			dev-libs/openssl:0=
+			net-analyzer/net-snmp:=
+			net-dns/avahi[dbus,python,${PYTHON_SINGLE_USEDEP}]
+		)
+	)
+"
+BDEPEND="
+	virtual/pkgconfig
+"
+DEPEND="
+	${COMMON_DEPEND}
+"
+RDEPEND="
+	${COMMON_DEPEND}
+	app-text/ghostscript-gpl
+	!minimal? (
+		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
+		kernel_linux? ( virtual/udev )
+		$(python_gen_cond_dep '
+			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
+			dev-python/distro[${PYTHON_MULTI_USEDEP}]
+			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
+			qt5? (
+				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
+				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
+			)
+			scanner? (
+				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
+				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
+				X? (
+					|| (
+						kde? ( kde-misc/skanlite )
+						media-gfx/xsane
+						media-gfx/sane-frontends
+					)
+				)
+			)
+		')
+	)
+	policykit? ( sys-auth/polkit )
+"
+
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+PATCHES=(
+	"${WORKDIR}/patches"
+)
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
+
+#DISABLE_AUTOFORMATTING="yes"
+DOC_CONTENTS="
+For more information on setting up your printer please take
+a look at the hplip section of the gentoo printing guide:
+https://wiki.gentoo.org/wiki/Printing
+"
+
+pkg_setup() {
+	python-single-r1_pkg_setup
+
+	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
+
+	use parport && linux-info_pkg_setup
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
+		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
+		ewarn "This also disables fax, network, scanner and gui support!"
+	fi
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+	fi
+}
+
+src_prepare() {
+	default
+
+	python_fix_shebang .
+
+	# Make desktop files follow the specification
+	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Encoding=.*/d' hplip.desktop.in || die
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Version=.*/d' \
+		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
+
+	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
+	# https://bugs.launchpad.net/hplip/+bug/500086
+	local udevdir=$(get_udevdir)
+	sed -i -e "s|/etc/udev|${udevdir}|g" \
+		$(find . -type f -exec grep -l /etc/udev {} +) || die
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die
+
+	eautoreconf
+}
+
+src_configure() {
+	local drv_build minimal_build
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install"
+		drv_build="${drv_build} --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	if use minimal ; then
+		if use hpijs ; then
+			minimal_build="--enable-hpijs-only-build"
+		else
+			minimal_build="--disable-hpijs-only-build"
+		fi
+		if use hpcups ; then
+			minimal_build="${minimal_build} --enable-hpcups-only-build"
+		else
+			minimal_build="${minimal_build} --disable-hpcups-only-build"
+		fi
+		minimal_build="${minimal_build} --disable-fax-build"
+		minimal_build="${minimal_build} --disable-network-build"
+		minimal_build="${minimal_build} --disable-scan-build"
+		minimal_build="${minimal_build} --disable-gui-build"
+	else
+		if use fax ; then
+			minimal_build="${minimal_build} --enable-fax-build"
+		else
+			minimal_build="${minimal_build} --disable-fax-build"
+		fi
+		if use snmp ; then
+			minimal_build="${minimal_build} --enable-network-build"
+		else
+			minimal_build="${minimal_build} --disable-network-build"
+		fi
+		if use scanner ; then
+			minimal_build="${minimal_build} --enable-scan-build"
+		else
+			minimal_build="${minimal_build} --disable-scan-build"
+		fi
+		if use qt5 ; then
+			minimal_build="${minimal_build} --enable-qt5"
+			minimal_build="${minimal_build} --enable-gui-build"
+		else
+			minimal_build="${minimal_build} --disable-gui-build"
+			minimal_build="${minimal_build} --disable-qt5"
+		fi
+	fi
+
+	# disable class driver for now
+	econf \
+		--disable-class-driver \
+		--disable-foomatic-rip-hplip-install \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-shadow-build \
+		--disable-qt3 \
+		--disable-qt4 \
+		--disable-udev_sysfs_rules \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--with-docdir=/usr/share/doc/${PF} \
+		--with-htmldir=/usr/share/doc/${PF}/html \
+		--enable-hpps-install \
+		--enable-dbus-build \
+		${drv_build} \
+		${minimal_build} \
+		$(use_enable doc doc-build) \
+		$(use_enable libusb0 libusb01_build) \
+		$(use_enable parport pp-build) \
+		$(use_enable policykit)
+
+	# hpijs ppds are created at configure time but are not installed (3.17.11)
+
+	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
+	# The hpcups driver does not use foomatic-rip
+	#local i
+	#for i in ppd/hpijs/*.ppd.gz ; do
+	#	rm -f ${i}.temp || die
+	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
+	#		gzip > ${i}.temp || die
+	#	mv ${i}.temp ${i} || die
+	#done
+}
+
+src_install() {
+	# Disable parallel install
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
+	emake -j1 DESTDIR="${D}" install
+	einstalldocs
+	# default
+
+	# Installed by sane-backends
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
+	rm -f "${ED}"/etc/sane.d/dll.conf || die
+
+	# Remove desktop and autostart files
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
+	use qt5 || {
+		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
+	}
+
+	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
+	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
+
+	# Remove hal fdi files
+	rm -rf "${ED}"/usr/share/hal || die
+
+	find "${D}" -name '*.la' -delete || die
+
+	python_optimize "${ED}"/usr/share/hplip
+
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+}
diff --git a/net-print/hplip/hplip-3.21.2.ebuild b/net-print/hplip/hplip-3.21.2.ebuild
deleted file mode 100644
index 42d7bc86720b..000000000000
--- a/net-print/hplip/hplip-3.21.2.ebuild
+++ /dev/null
@@ -1,287 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PYTHON_COMPAT=( python3_{7,8} )
-PYTHON_REQ_USE="threads(+),xml"
-
-# 14 and 15 spit out a lot of warnings about subdirs
-WANT_AUTOMAKE="1.13"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
-		https://dev.gentoo.org/~billie/distfiles/${PN}-3.21.2-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-COMMON_DEPEND="
-	net-print/cups
-	sys-apps/dbus
-	virtual/jpeg:0
-	hpijs? ( net-print/cups-filters[foomatic] )
-	!libusb0? ( virtual/libusb:1 )
-	libusb0? ( virtual/libusb:0 )
-	${PYTHON_DEPS}
-	!minimal? (
-		scanner? (
-			media-gfx/sane-backends
-		)
-		snmp? (
-			dev-libs/openssl:0=
-			net-analyzer/net-snmp:=
-			$(python_gen_cond_dep 'net-dns/avahi[dbus,${PYTHON_MULTI_USEDEP}]')
-		)
-	)
-"
-BDEPEND="
-	virtual/pkgconfig
-"
-DEPEND="
-	${COMMON_DEPEND}
-"
-RDEPEND="
-	${COMMON_DEPEND}
-	app-text/ghostscript-gpl
-	!minimal? (
-		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
-		kernel_linux? ( virtual/udev )
-		$(python_gen_cond_dep '
-			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
-			dev-python/distro[${PYTHON_MULTI_USEDEP}]
-			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
-			qt5? (
-				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
-				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
-			)
-			scanner? (
-				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
-				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
-				X? (
-					|| (
-						kde? ( kde-misc/skanlite )
-						media-gfx/xsane
-						media-gfx/sane-frontends
-					)
-				)
-			)
-		')
-	)
-	policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="${PYTHON_REQUIRED_USE}"
-
-PATCHES=(
-	"${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-"
-
-pkg_setup() {
-	python-single-r1_pkg_setup
-
-	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
-	use parport && linux-info_pkg_setup
-
-	if use minimal ; then
-		ewarn "Installing driver portions only, make sure you know what you are doing."
-		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
-		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
-		ewarn "This also disables fax, network, scanner and gui support!"
-	fi
-
-	if ! use hpcups && ! use hpijs ; then
-		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
-		ewarn "which is probably not what you want."
-		ewarn "You will almost certainly not be able to print."
-	fi
-}
-
-src_prepare() {
-	default
-
-	python_fix_shebang .
-
-	# Make desktop files follow the specification
-	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Encoding=.*/d' hplip.desktop.in || die
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Version=.*/d' \
-		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
-	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
-	# https://bugs.launchpad.net/hplip/+bug/500086
-	local udevdir=$(get_udevdir)
-	sed -i -e "s|/etc/udev|${udevdir}|g" \
-		$(find . -type f -exec grep -l /etc/udev {} +) || die
-
-	# Force recognition of Gentoo distro by hp-check
-	sed -i \
-		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
-		installer/core_install.py || die
-
-	eautoreconf
-}
-
-src_configure() {
-	local drv_build minimal_build
-
-	if use hpcups ; then
-		drv_build="$(use_enable hpcups hpcups-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-cups-ppd-install"
-			drv_build="${drv_build} --disable-cups-drv-install"
-		else
-			drv_build="${drv_build} --enable-cups-drv-install"
-			drv_build="${drv_build} --disable-cups-ppd-install"
-		fi
-	else
-		drv_build="--disable-hpcups-install"
-		drv_build="${drv_build} --disable-cups-drv-install"
-		drv_build="${drv_build} --disable-cups-ppd-install"
-	fi
-
-	if use hpijs ; then
-		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-foomatic-ppd-install"
-			drv_build="${drv_build} --disable-foomatic-drv-install"
-		else
-			drv_build="${drv_build} --enable-foomatic-drv-install"
-			drv_build="${drv_build} --disable-foomatic-ppd-install"
-		fi
-	else
-		drv_build="${drv_build} --disable-hpijs-install"
-		drv_build="${drv_build} --disable-foomatic-drv-install"
-		drv_build="${drv_build} --disable-foomatic-ppd-install"
-	fi
-
-	if use minimal ; then
-		if use hpijs ; then
-			minimal_build="--enable-hpijs-only-build"
-		else
-			minimal_build="--disable-hpijs-only-build"
-		fi
-		if use hpcups ; then
-			minimal_build="${minimal_build} --enable-hpcups-only-build"
-		else
-			minimal_build="${minimal_build} --disable-hpcups-only-build"
-		fi
-		minimal_build="${minimal_build} --disable-fax-build"
-		minimal_build="${minimal_build} --disable-network-build"
-		minimal_build="${minimal_build} --disable-scan-build"
-		minimal_build="${minimal_build} --disable-gui-build"
-	else
-		if use fax ; then
-			minimal_build="${minimal_build} --enable-fax-build"
-		else
-			minimal_build="${minimal_build} --disable-fax-build"
-		fi
-		if use snmp ; then
-			minimal_build="${minimal_build} --enable-network-build"
-		else
-			minimal_build="${minimal_build} --disable-network-build"
-		fi
-		if use scanner ; then
-			minimal_build="${minimal_build} --enable-scan-build"
-		else
-			minimal_build="${minimal_build} --disable-scan-build"
-		fi
-		if use qt5 ; then
-			minimal_build="${minimal_build} --enable-qt5"
-			minimal_build="${minimal_build} --enable-gui-build"
-		else
-			minimal_build="${minimal_build} --disable-gui-build"
-			minimal_build="${minimal_build} --disable-qt5"
-		fi
-	fi
-
-	# disable class driver for now
-	econf \
-		--disable-class-driver \
-		--disable-foomatic-rip-hplip-install \
-		--disable-cups11-build \
-		--disable-lite-build \
-		--disable-shadow-build \
-		--disable-qt3 \
-		--disable-qt4 \
-		--disable-udev_sysfs_rules \
-		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
-		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
-		--with-docdir=/usr/share/doc/${PF} \
-		--with-htmldir=/usr/share/doc/${PF}/html \
-		--enable-hpps-install \
-		--enable-dbus-build \
-		${drv_build} \
-		${minimal_build} \
-		$(use_enable doc doc-build) \
-		$(use_enable libusb0 libusb01_build) \
-		$(use_enable parport pp-build) \
-		$(use_enable policykit)
-
-	# hpijs ppds are created at configure time but are not installed (3.17.11)
-
-	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
-	# The hpcups driver does not use foomatic-rip
-	#local i
-	#for i in ppd/hpijs/*.ppd.gz ; do
-	#	rm -f ${i}.temp || die
-	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
-	#		gzip > ${i}.temp || die
-	#	mv ${i}.temp ${i} || die
-	#done
-}
-
-src_install() {
-	# Disable parallel install
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
-	emake -j1 DESTDIR="${D}" install
-	einstalldocs
-	# default
-
-	# Installed by sane-backends
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
-	rm -f "${ED}"/etc/sane.d/dll.conf || die
-
-	# Remove desktop and autostart files
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
-	use qt5 || {
-		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
-	}
-
-	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
-	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
-
-	# Remove hal fdi files
-	rm -rf "${ED}"/usr/share/hal || die
-
-	find "${D}" -name '*.la' -delete || die
-
-	python_optimize "${ED}"/usr/share/hplip
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}
-- 
cgit v1.2.3