From f516638b7fe9592837389826a6152a7e1b251c54 Mon Sep 17 00:00:00 2001
From: V3n3RiX <venerix@redcorelinux.org>
Date: Sat, 30 May 2020 11:44:06 +0100
Subject: gentoo resync : 30.05.2020

---
 net-print/hplip/Manifest            |   7 +-
 net-print/hplip/hplip-3.20.2.ebuild | 276 -----------------------------------
 net-print/hplip/hplip-3.20.3.ebuild |   2 +-
 net-print/hplip/hplip-3.20.5.ebuild | 277 ++++++++++++++++++++++++++++++++++++
 4 files changed, 282 insertions(+), 280 deletions(-)
 delete mode 100644 net-print/hplip/hplip-3.20.2.ebuild
 create mode 100644 net-print/hplip/hplip-3.20.5.ebuild

(limited to 'net-print/hplip')

diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index 04ad9aa65d8e..fd5d3c48503b 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -1,8 +1,9 @@
 DIST hplip-3.18.12-patches-1.tar.xz 12032 BLAKE2B 33e6e4e1e0e5b4f998459073cf0742b7c56929b23e6c1cc3ba9df4eafb8007273a5a2e7f27af0d2d4a3a97ebb9cfe462b74dcddd7149088980893b2c66113b7c SHA512 3b0e2b4f7d8da257c6fcf12f2e049276d059426f2d1c626324982ce862efa2323cbb191a373c53fea7880e3b6e44ec62e584091676556d97e6a456edea4c44cf
 DIST hplip-3.19.12.tar.gz 25676247 BLAKE2B 1373aa70a2307071c28a22b0ae85e242c3e6bec614ef7490c1ecc0e5e745b81b6c2097948fbd062b5e72e10714cdc8d6f9145aacafc0fedeafde375909cb2cb6 SHA512 5552cd717ae082ee55cdb77d79e8d035d8ecb7cf23c79d659fda43468d8ed414a33c4d869eab4ab83dee836f0d1cceb74c3c4a249e26f904a5ab2350e08a5677
-DIST hplip-3.20.2.tar.gz 25675649 BLAKE2B 8e98768736fe4ec667852fccebf2bb178047eedb1d92b995d3107ea4c8ba618caa24204c48069b06333a2797dabdf14e1d7d066f5aca77e2c88a85c7080223e6 SHA512 9343eca569c8367e8207708a76351c0f97472500d07f26b62867b4001d504f24b2d2ecfe431e8019623477e7e5d55623d5d91848b4aba71c3e88c8302ed51b4c
 DIST hplip-3.20.3.tar.gz 25672070 BLAKE2B 4c6209a268898de123b2b557d662acddb3ad90b227c0752ebdd1e2afb3fe3d19fddc819aba999347708dd0c098f2b8fea4580dcfb3d5fc7893e47520cae7c1d5 SHA512 a397eb3896292ac956a1969b76707af62c866e47d88148fa75b68574e4639283f7414a2c77e6854c5d22daea49181d4f1bc2daf11fb3058372ff084d591696f1
+DIST hplip-3.20.5-patches-1.tar.xz 12716 BLAKE2B 982480185b2decb9f4e857336b474dab585d64aa44a9f0da70ba568e20488f451507aae3bd1427aef4274d36db93dd9bcb1d906f7b393939dfc43c81a1f9a9db SHA512 ae46a6f490253a1112838b08d56199c6257d33911569619483d925798b54a8bc9fe57afd1e86dedb9482d89d42f44bec81db215f37cbcd8fb5982596c80c1117
+DIST hplip-3.20.5.tar.gz 25774089 BLAKE2B b1d95e5551ead7818c7fb8529edffea59718944e6838370594f20f8e4917ee23d0beb85f1b68867c332c196ab863f8479ab9b645ce57d9b03dae59fd1cab5f0a SHA512 fce3c7b8a2f3b0d2875bafd2ff65a3312fae867b658cd45eea16d9f3663646b6b0b70b58e6c2b46eb24627cdeefb318b6ca9ccf5a0e9790ff19519518992da07
 EBUILD hplip-3.19.12-r1.ebuild 7827 BLAKE2B e57c664d4802fed5721dc0d1d8a211ac292e955bf647d8b453fdf42a40214cd4a61918e764c24cc1dacaee05c77e5b3a8ca0fc7822c9c17e7089cf6b8a7a0692 SHA512 7f4cedf809f7b42c70ad46bc7674789becd4ecd24129465aa892885f80998a86d2919c371ecbe733a2654a8604a427739c85fe63edadebce7f53f5d687594739
-EBUILD hplip-3.20.2.ebuild 7832 BLAKE2B a6330e829cb0dbbf580ee6b41c2599a0fcb14ff6323a28f3feec3c00d7c0dde8915767c6e29c4738078bbd915b9f1226fb2bda57ad577a02985ac4a849c7b4d7 SHA512 79f50926870307c4825dee5268199bcfda42db0973cf10ea720a0907bf2f8e789710012d196e3e468cda66e941125777693415b0b8f55b12f57dfe67b685a415
-EBUILD hplip-3.20.3.ebuild 7873 BLAKE2B 5d44edb2e7b6b4716a6d57ebbf41d7b129ed34d57be4fe4bbbb909170c833c61ab7edb65b42bc73465f63432516d762c231efe1a462029ed89339c14f8531eb2 SHA512 c93ab876029bf2065c5ad607902cf99dddd1d2c1bc8caca43856409fdfe2b7933c137cef1ad68fde0cfa5135d76ea399df5f5bb18b57861bef1903c17ece5af9
+EBUILD hplip-3.20.3.ebuild 7869 BLAKE2B 16becfe7b3e8285b8e52326a84f66fe14a64a698c9eae228517196317424b59de1e651dd820c53ea562d046cfb74d6b15c74af6f9772a475f85186be244a52db SHA512 77556fc147f1b3593cdf57d856ce39278a8def19d2e39e2724eb30c4c4e064088570c331f78256ea5fde2b9d25bbce9c8a7e68ef146bfe31397754d351be755b
+EBUILD hplip-3.20.5.ebuild 7872 BLAKE2B 045c2a2f812087de1a717a7de4fac16e30de507ec7048100313e3477c5b3debb70b3215ed1df0d5d840f4e0350f2187c391b6d8af3dfc962b04499fd4b9448f9 SHA512 ea05d3c9019870aaf58c4a833775f3ffc4306569892803e716c528bdd7cc24488977ff1dbe546f5ea92fad3c5cda217baef92529ec13d4dc6690258208071a65
 MISC metadata.xml 1910 BLAKE2B fd9fc7a40bd2bb877e7b4e26104df247dc8c7aa5cbd7211f5d489ec889834aa64fff20d6624f3c8b3e1e4428704cb7f2eb4d1bffc1c6fb15f15b05fd422297e2 SHA512 022854843c9ae373aed3ebd3879c9f1312773dea5dca15c85fb839ff067ea5599532201fa51d9e91ec18b0be1773e2ad544cd4e5697eb9c91be22d8d9352d7ef
diff --git a/net-print/hplip/hplip-3.20.2.ebuild b/net-print/hplip/hplip-3.20.2.ebuild
deleted file mode 100644
index 49cad9be3506..000000000000
--- a/net-print/hplip/hplip-3.20.2.ebuild
+++ /dev/null
@@ -1,276 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PYTHON_COMPAT=( python3_{6,7} )
-PYTHON_REQ_USE="threads(+),xml"
-
-# 14 and 15 spit out a lot of warnings about subdirs
-WANT_AUTOMAKE="1.13"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
-		https://dev.gentoo.org/~billie/distfiles/${PN}-3.18.12-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde libnotify libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-COMMON_DEPEND="
-	net-print/cups
-	virtual/jpeg:0
-	hpijs? ( net-print/cups-filters[foomatic] )
-	!minimal? (
-		${PYTHON_DEPS}
-		sys-apps/dbus
-		!libusb0? ( virtual/libusb:1 )
-		libusb0? ( virtual/libusb:0 )
-		scanner? ( media-gfx/sane-backends )
-		snmp? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-			net-analyzer/net-snmp
-		)
-	)
-"
-BDEPEND="
-	virtual/pkgconfig
-"
-DEPEND="
-	${COMMON_DEPEND}
-"
-RDEPEND="
-	${COMMON_DEPEND}
-	app-text/ghostscript-gpl
-	!minimal? (
-		$(python_gen_cond_dep 'dev-python/pygobject:2[${PYTHON_MULTI_USEDEP}]' 'python2*')
-		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
-		kernel_linux? ( virtual/udev )
-		$(python_gen_cond_dep '
-			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
-			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
-			qt5? (
-				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
-				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
-			)
-			scanner? (
-				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
-				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
-				X? (
-					|| (
-						kde? ( kde-misc/skanlite )
-						media-gfx/xsane
-						media-gfx/sane-frontends
-					)
-				)
-			)
-		')
-	)
-	policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
-	"${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
-	use !minimal && python-single-r1_pkg_setup
-
-	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
-	if ! use hpcups && ! use hpijs ; then
-		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
-		ewarn "which is probably not what you want."
-		ewarn "You will almost certainly not be able to print."
-	fi
-
-	if use minimal ; then
-		ewarn "Installing driver portions only, make sure you know what you are doing."
-		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
-		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
-	else
-		use parport && linux-info_pkg_setup
-	fi
-}
-
-src_prepare() {
-	default
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_fix_shebang .
-	fi
-
-	# Make desktop files follow the specification
-	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Encoding=.*/d' hplip.desktop.in || die
-	sed -i -e '/^Categories=/s/Application;//' \
-		-e '/^Version=.*/d' \
-		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
-	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
-	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
-	# https://bugs.launchpad.net/hplip/+bug/500086
-	local udevdir=$(get_udevdir)
-	sed -i -e "s|/etc/udev|${udevdir}|g" \
-		$(find . -type f -exec grep -l /etc/udev {} +) || die
-
-	# Force recognition of Gentoo distro by hp-check
-	sed -i \
-		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
-		installer/core_install.py || die
-
-	eautoreconf
-}
-
-src_configure() {
-	local myconf drv_build minimal_build
-
-	if use libusb0 ; then
-		myconf="${myconf} --enable-libusb01_build"
-	else
-		myconf="${myconf} --disable-libusb01_build"
-	fi
-
-	if use hpcups ; then
-		drv_build="$(use_enable hpcups hpcups-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-cups-ppd-install"
-			drv_build="${drv_build} --disable-cups-drv-install"
-		else
-			drv_build="${drv_build} --enable-cups-drv-install"
-			drv_build="${drv_build} --disable-cups-ppd-install"
-		fi
-	else
-		drv_build="--disable-hpcups-install"
-		drv_build="${drv_build} --disable-cups-drv-install"
-		drv_build="${drv_build} --disable-cups-ppd-install"
-	fi
-
-	if use hpijs ; then
-		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
-		if use static-ppds ; then
-			drv_build="${drv_build} --enable-foomatic-ppd-install"
-			drv_build="${drv_build} --disable-foomatic-drv-install"
-		else
-			drv_build="${drv_build} --enable-foomatic-drv-install"
-			drv_build="${drv_build} --disable-foomatic-ppd-install"
-		fi
-	else
-		drv_build="${drv_build} --disable-hpijs-install"
-		drv_build="${drv_build} --disable-foomatic-drv-install"
-		drv_build="${drv_build} --disable-foomatic-ppd-install"
-	fi
-
-	if use minimal ; then
-		if use hpijs ; then
-			minimal_build="--enable-hpijs-only-build"
-		else
-			minimal_build="--disable-hpijs-only-build"
-		fi
-		if use hpcups ; then
-			minimal_build="${minimal_build} --enable-hpcups-only-build"
-		else
-			minimal_build="${minimal_build} --disable-hpcups-only-build"
-		fi
-	fi
-
-	# disable class driver for now
-	econf \
-		--disable-cups11-build \
-		--disable-lite-build \
-		--disable-foomatic-rip-hplip-install \
-		--disable-shadow-build \
-		--disable-qt3 \
-		--disable-qt4 \
-		--disable-udev_sysfs_rules \
-		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
-		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
-		--with-docdir=/usr/share/doc/${PF} \
-		--with-htmldir=/usr/share/doc/${PF}/html \
-		${myconf} \
-		${drv_build} \
-		${minimal_build} \
-		--enable-hpps-install \
-		--disable-class-driver \
-		$(use_enable doc doc-build) \
-		$(use_enable fax fax-build) \
-		$(use_enable !minimal gui-build) \
-		$(use_enable !minimal dbus-build) \
-		$(use_enable parport pp-build) \
-		$(use_enable policykit) \
-		$(use_enable qt5) \
-		$(use_enable scanner scan-build) \
-		$(use_enable snmp network-build)
-
-	# hpijs ppds are created at configure time but are not installed (3.17.11)
-
-	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
-	# The hpcups driver does not use foomatic-rip
-	#local i
-	#for i in ppd/hpijs/*.ppd.gz ; do
-	#	rm -f ${i}.temp || die
-	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
-	#		gzip > ${i}.temp || die
-	#	mv ${i}.temp ${i} || die
-	#done
-}
-
-src_install() {
-	# Disable parallel install
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
-	emake -j1 DESTDIR="${D}" install
-	einstalldocs
-	# default
-
-	# Installed by sane-backends
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
-	rm -f "${ED}"/etc/sane.d/dll.conf || die
-
-	# Remove desktop and autostart files
-	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
-	use qt5 || {
-		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
-	}
-
-	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
-	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
-
-	# Remove hal fdi files
-	rm -rf "${ED}"/usr/share/hal || die
-
-	find "${D}" -name '*.la' -delete || die
-
-	if use !minimal ; then
-		python_export EPYTHON PYTHON
-		python_optimize "${ED}"/usr/share/hplip
-	fi
-
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-}
diff --git a/net-print/hplip/hplip-3.20.3.ebuild b/net-print/hplip/hplip-3.20.3.ebuild
index d24a1c95865e..8dd5f02c2525 100644
--- a/net-print/hplip/hplip-3.20.3.ebuild
+++ b/net-print/hplip/hplip-3.20.3.ebuild
@@ -18,7 +18,7 @@ SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
 
 LICENSE="GPL-2"
 SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc64 ~x86"
+KEYWORDS="amd64 arm ppc64 x86"
 
 IUSE="doc fax +hpcups hpijs kde libnotify libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
 
diff --git a/net-print/hplip/hplip-3.20.5.ebuild b/net-print/hplip/hplip-3.20.5.ebuild
new file mode 100644
index 000000000000..19c12999e53d
--- /dev/null
+++ b/net-print/hplip/hplip-3.20.5.ebuild
@@ -0,0 +1,277 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{6,7,8} )
+PYTHON_REQ_USE="threads(+),xml"
+
+# 14 and 15 spit out a lot of warnings about subdirs
+WANT_AUTOMAKE="1.13"
+
+inherit autotools flag-o-matic linux-info python-single-r1 readme.gentoo-r1 udev
+
+DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
+HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing"
+SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
+		https://dev.gentoo.org/~billie/distfiles/${PN}-3.20.5-patches-1.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~arm ~ppc64 ~x86"
+
+IUSE="doc fax +hpcups hpijs kde libnotify libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
+
+COMMON_DEPEND="
+	net-print/cups
+	virtual/jpeg:0
+	hpijs? ( net-print/cups-filters[foomatic] )
+	!minimal? (
+		${PYTHON_DEPS}
+		sys-apps/dbus
+		!libusb0? ( virtual/libusb:1 )
+		libusb0? ( virtual/libusb:0 )
+		scanner? ( media-gfx/sane-backends )
+		snmp? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+			net-analyzer/net-snmp
+		)
+	)
+"
+BDEPEND="
+	virtual/pkgconfig
+"
+DEPEND="
+	${COMMON_DEPEND}
+"
+RDEPEND="
+	${COMMON_DEPEND}
+	app-text/ghostscript-gpl
+	!minimal? (
+		$(python_gen_cond_dep 'dev-python/pygobject:2[${PYTHON_MULTI_USEDEP}]' 'python2*')
+		$(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}]' 'python3*')
+		kernel_linux? ( virtual/udev )
+		$(python_gen_cond_dep '
+			>=dev-python/dbus-python-1.2.0-r1[${PYTHON_MULTI_USEDEP}]
+			dev-python/distro[${PYTHON_MULTI_USEDEP}]
+			fax? ( dev-python/reportlab[${PYTHON_MULTI_USEDEP}] )
+			qt5? (
+				>=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_MULTI_USEDEP}]
+				libnotify? ( dev-python/notify2[${PYTHON_MULTI_USEDEP}] )
+			)
+			scanner? (
+				>=dev-python/reportlab-3.2[${PYTHON_MULTI_USEDEP}]
+				>=dev-python/pillow-3.1.1[${PYTHON_MULTI_USEDEP}]
+				X? (
+					|| (
+						kde? ( kde-misc/skanlite )
+						media-gfx/xsane
+						media-gfx/sane-frontends
+					)
+				)
+			)
+		')
+	)
+	policykit? ( sys-auth/polkit )
+"
+
+REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
+
+PATCHES=(
+	"${WORKDIR}/patches"
+)
+
+CONFIG_CHECK="~PARPORT ~PPDEV"
+ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
+
+#DISABLE_AUTOFORMATTING="yes"
+DOC_CONTENTS="
+For more information on setting up your printer please take
+a look at the hplip section of the gentoo printing guide:
+https://wiki.gentoo.org/wiki/Printing
+
+Any user who wants to print must be in the lp group.
+"
+
+pkg_setup() {
+	use !minimal && python-single-r1_pkg_setup
+
+	use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
+
+	if ! use hpcups && ! use hpijs ; then
+		ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
+		ewarn "which is probably not what you want."
+		ewarn "You will almost certainly not be able to print."
+	fi
+
+	if use minimal ; then
+		ewarn "Installing driver portions only, make sure you know what you are doing."
+		ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
+		ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
+	else
+		use parport && linux-info_pkg_setup
+	fi
+}
+
+src_prepare() {
+	default
+
+	if use !minimal ; then
+		python_fix_shebang .
+	fi
+
+	# Make desktop files follow the specification
+	# Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Encoding=.*/d' hplip.desktop.in || die
+	sed -i -e '/^Categories=/s/Application;//' \
+		-e '/^Version=.*/d' \
+		-e '/^Comment=.*/d' hplip-systray.desktop.in || die
+
+	# Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
+	# Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
+	# https://bugs.launchpad.net/hplip/+bug/500086
+	local udevdir=$(get_udevdir)
+	sed -i -e "s|/etc/udev|${udevdir}|g" \
+		$(find . -type f -exec grep -l /etc/udev {} +) || die
+
+	# Force recognition of Gentoo distro by hp-check
+	sed -i \
+		-e "s:file('/etc/issue', 'r').read():'Gentoo':" \
+		installer/core_install.py || die
+
+	eautoreconf
+}
+
+src_configure() {
+	local myconf drv_build minimal_build
+
+	append-cppflags "$(python-config --includes)"
+
+	if use libusb0 ; then
+		myconf="${myconf} --enable-libusb01_build"
+	else
+		myconf="${myconf} --disable-libusb01_build"
+	fi
+
+	if use hpcups ; then
+		drv_build="$(use_enable hpcups hpcups-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-cups-ppd-install"
+			drv_build="${drv_build} --disable-cups-drv-install"
+		else
+			drv_build="${drv_build} --enable-cups-drv-install"
+			drv_build="${drv_build} --disable-cups-ppd-install"
+		fi
+	else
+		drv_build="--disable-hpcups-install"
+		drv_build="${drv_build} --disable-cups-drv-install"
+		drv_build="${drv_build} --disable-cups-ppd-install"
+	fi
+
+	if use hpijs ; then
+		drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
+		if use static-ppds ; then
+			drv_build="${drv_build} --enable-foomatic-ppd-install"
+			drv_build="${drv_build} --disable-foomatic-drv-install"
+		else
+			drv_build="${drv_build} --enable-foomatic-drv-install"
+			drv_build="${drv_build} --disable-foomatic-ppd-install"
+		fi
+	else
+		drv_build="${drv_build} --disable-hpijs-install"
+		drv_build="${drv_build} --disable-foomatic-drv-install"
+		drv_build="${drv_build} --disable-foomatic-ppd-install"
+	fi
+
+	if use minimal ; then
+		if use hpijs ; then
+			minimal_build="--enable-hpijs-only-build"
+		else
+			minimal_build="--disable-hpijs-only-build"
+		fi
+		if use hpcups ; then
+			minimal_build="${minimal_build} --enable-hpcups-only-build"
+		else
+			minimal_build="${minimal_build} --disable-hpcups-only-build"
+		fi
+	fi
+
+	# disable class driver for now
+	econf \
+		--disable-cups11-build \
+		--disable-lite-build \
+		--disable-foomatic-rip-hplip-install \
+		--disable-shadow-build \
+		--disable-qt3 \
+		--disable-qt4 \
+		--disable-udev_sysfs_rules \
+		--with-cupsbackenddir=$(cups-config --serverbin)/backend \
+		--with-cupsfilterdir=$(cups-config --serverbin)/filter \
+		--with-docdir=/usr/share/doc/${PF} \
+		--with-htmldir=/usr/share/doc/${PF}/html \
+		${myconf} \
+		${drv_build} \
+		${minimal_build} \
+		--enable-hpps-install \
+		--disable-class-driver \
+		$(use_enable doc doc-build) \
+		$(use_enable fax fax-build) \
+		$(use_enable !minimal gui-build) \
+		$(use_enable !minimal dbus-build) \
+		$(use_enable parport pp-build) \
+		$(use_enable policykit) \
+		$(use_enable qt5) \
+		$(use_enable scanner scan-build) \
+		$(use_enable snmp network-build)
+
+	# hpijs ppds are created at configure time but are not installed (3.17.11)
+
+	# Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
+	# The hpcups driver does not use foomatic-rip
+	#local i
+	#for i in ppd/hpijs/*.ppd.gz ; do
+	#	rm -f ${i}.temp || die
+	#	gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
+	#		gzip > ${i}.temp || die
+	#	mv ${i}.temp ${i} || die
+	#done
+}
+
+src_install() {
+	# Disable parallel install
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
+	emake -j1 DESTDIR="${D}" install
+	einstalldocs
+	# default
+
+	# Installed by sane-backends
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
+	rm -f "${ED}"/etc/sane.d/dll.conf || die
+
+	# Remove desktop and autostart files
+	# Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770
+	use qt5 || {
+		rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg
+	}
+
+	rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
+	rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die
+
+	# Remove hal fdi files
+	rm -rf "${ED}"/usr/share/hal || die
+
+	find "${D}" -name '*.la' -delete || die
+
+	if use !minimal ; then
+		python_optimize "${ED}"/usr/share/hplip
+	fi
+
+	readme.gentoo_create_doc
+}
+
+pkg_postinst() {
+	readme.gentoo_print_elog
+}
-- 
cgit v1.2.3