From 7f3fecbb5b871825fe9632f46659869cab6a3769 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sat, 4 May 2024 00:00:19 +0100 Subject: gentoo auto-resync : 04:05:2024 - 00:00:19 --- sci-libs/linux-gpib/Manifest | 2 +- sci-libs/linux-gpib/linux-gpib-4.3.6-r1.ebuild | 185 ------------------------ sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild | 189 +++++++++++++++++++++++++ 3 files changed, 190 insertions(+), 186 deletions(-) delete mode 100644 sci-libs/linux-gpib/linux-gpib-4.3.6-r1.ebuild create mode 100644 sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild (limited to 'sci-libs/linux-gpib') diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest index 2ed66263f411..f375032c7bbd 100644 --- a/sci-libs/linux-gpib/Manifest +++ b/sci-libs/linux-gpib/Manifest @@ -3,5 +3,5 @@ DIST gpib_firmware-2008-08-10.tar.gz 173004 BLAKE2B 05fcde09de5246b86004c263c733 DIST linux-gpib-4.3.5.tar.gz 1462624 BLAKE2B fff30ed1a7abc18cd4317e8f8979ef4014a532baab8c014f9a2eaa3338a2e8e8b672214d3f2b3f44066be15f432861a3fe3d67652f6966e73e561d99ff1e1566 SHA512 018cc255922a6335f8d28418b0a0808c3a369506470d9c81432ac7183ae255217d938a419e10ba2b0c44205a9d901405ce00ad5bdd968db2721cedd83baa2f76 DIST linux-gpib-4.3.6.tar.gz 1433121 BLAKE2B 64e2b19106d0531df990b1338f82a71707e54f448d652f6379eb9cd71feb84637090ed8fdfb0264248aa6879d5b9a1dc50e75c21a2c22a31397120eea5903e98 SHA512 a8005c71bfddb854ecbe4df0a81530e44378150242508b10df58c61d039c6d329020407608e31f1ef360de0c83169e76b793c032256e732d229bfd2da4cbaa35 EBUILD linux-gpib-4.3.5.ebuild 4998 BLAKE2B 58df8bb468d2902ff2cfd10b5b1d70bdca6da62a5abae0e9d70e462de077667be0bd85236a6c97fb30c77b0f4f0eb1be8ffd8cae5c2ea64e82f6fda89168d698 SHA512 52f525242338765586e3a25ba39a830357d9717badb8be6202a0a37a5e4155daaaeaa8f4f5d33225ac5a1182586cbf7f6e9f7b9a268c00a2176fa801ed12451e -EBUILD linux-gpib-4.3.6-r1.ebuild 5081 BLAKE2B 210607bbf948185a0171fa18cc35a470d4b141ceb153ed6b843ddc44b41b2f4a6fa4a8e12feac9ac81287d05a048e7fb8dc43d655b6f8cd00678c53e564d7c5f SHA512 e8ed56cd192785d85beecf461aec4612e7aefe9b1d3a0552ada3efe429b5e42b92108096fca1c11825b262f5214e23def262a7e09a44b4ed8ae49bc95e6875c5 +EBUILD linux-gpib-4.3.6-r3.ebuild 5106 BLAKE2B d90fd8611d50b8a95c117a53909fd48ee70c98e3d3969792efda71f243c08312f440c0cb767db77d0740a14822b308383142277e52a57e6fae9cdad9d40ed14c SHA512 59caa0d38b8e04d817ec9fef50e6030f9cafc4181238755b56fcd52891357bb7ff4f97cb21fa54a33b80f95dc0a2d9bd0b66befdd3b5e2b5dae3833cd0ad66bb MISC metadata.xml 548 BLAKE2B c976143b910efb6a8920f064f35fdac9cb325ff272aca8a7644511300f4dfe9232c280577a90eae225ca4f88bc2b4cd09d175d4190bc13513d89457f57c9bb52 SHA512 c611a420ab28d623b5b9167bd59c04c2fe27404a7fd85de72a555f99ef8bad4383702482ae808d4eb66014a9e63ca057aa7195748f9c230f0778fcbde07fb71f diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.6-r1.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.6-r1.ebuild deleted file mode 100644 index b78bd960e1b4..000000000000 --- a/sci-libs/linux-gpib/linux-gpib-4.3.6-r1.ebuild +++ /dev/null @@ -1,185 +0,0 @@ -# Copyright 1999-2024 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=8 - -PYTHON_COMPAT=( python3_{10..12} ) - -inherit readme.gentoo-r1 autotools perl-functions python-single-r1 udev - -# Check for latest firmware version on bump -FW_PV="2008-08-10" - -DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware" -HOMEPAGE="https://linux-gpib.sourceforge.io/" -SRC_URI="https://downloads.sourceforge.net/linux-gpib/${P}.tar.gz - firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-${FW_PV}.tar.gz ) -" -S="${WORKDIR}/${PN}-user-${PV}" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~x86" -IUSE="pcmcia static guile perl php python tcl doc firmware" -REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" - -COMMONDEPEND=" - sys-libs/readline:= - tcl? ( dev-lang/tcl:0= ) - guile? ( dev-scheme/guile:12 ) - perl? ( dev-lang/perl:= ) - php? ( dev-lang/php:= ) - python? ( ${PYTHON_DEPS} ) - firmware? ( sys-apps/fxload ) -" -RDEPEND="${COMMONDEPEND} - acct-group/gpib - ~sci-libs/linux-gpib-modules-${PV} -" -DEPEND="${COMMONDEPEND}" -BDEPEND=" - virtual/pkgconfig - doc? ( app-text/docbook-sgml-utils ) - perl? ( virtual/perl-ExtUtils-MakeMaker ) -" - -PATCHES=( - "${FILESDIR}"/${PN}-4.3.0-perl.patch -) - -pkg_setup() { - use perl && perl_set_version - use python && python_setup -} - -src_unpack() { - default - unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz" -} - -src_prepare() { - default - - # We have to use --root instead of --prefix for setup.py. - # Otherwise the python files are not installed properly into site-packages. - sed -i -e \ - 's/--prefix=$(DESTDIR)$(prefix)/--root=$(DESTDIR)/g' \ - language/python/Makefile.am || die - - eautoreconf -} - -src_configure() { - econf \ - $(use_enable static) \ - $(use_enable guile guile-binding) \ - $(use_enable perl perl-binding) \ - $(use_enable php php-binding) \ - $(use_enable python python-binding) \ - $(use_enable tcl tcl-binding) \ - $(use_enable doc documentation) -} - -src_install() { - # PYTHONDONTWRITEBYTECODE=0 is required, otherwise - # installation of the python files is skipped - FIRM_DIR=/usr/share/usb - emake \ - DESTDIR="${ED}" \ - INSTALL_MOD_PATH="${ED}" \ - HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ - UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ - USB_FIRMWARE_DIR=${FIRM_DIR} \ - PYTHONDONTWRITEBYTECODE=0 \ - docdir="/usr/share/doc/${PF}/html" install - - if use perl; then - einfo "Installing perl module" - cd "${S}"/language/perl || die - emake DESTDIR="${ED}" install - perl_fix_packlist - perl_delete_emptybsdir - cd "${S}" || die - fi - - echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules - udev_dorules 99-gpib.rules - - dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS - - insinto /etc - newins util/templates/gpib.conf gpib.conf - newins util/templates/gpib.conf gpib.conf.example - - if use pcmcia; then - insinto /etc/pcmcia - doins "${S}"/etc/pcmcia/* - fi - - # fix rules files - local f - find "${ED}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do - grep -q "${ED}" "${f}" && einfo "File ${f} contains a temporary path, fixing." - sed -i -e "s:${ED}:/:g" "${f}" - done - - # remove .la files - find "${ED}" -name '*.la' -delete || die - - DOC_CONTENTS=" -As the udev rules were changed and refactored in this release it is -necessary to remove any manually installed pre-4.3.0 gpib udev rules files -in /etc/udev/rules.d/. The files to remove are: -\n - 99-agilent_82357a.rules\n - 99-gpib-generic.rules\n - 99-ni_usb_gpib.rules\n -\n -You need to run the 'gpib_config' utility to setup the driver before -you can use it. In order to do it automatically you can add to your -start script something like this (supposing the appropriate driver -is loaded on the startup): -\n - gpib_config --minor 0 -\n -To give a user access to the computer's gpib board you will have to add -them to the group 'gpib' or, you could change the permissions on the device -files /dev/gpib[0-15] to something you like better, using 'chmod' -\n -Edit /etc/gpib.conf to match your interface board, and any devices you wish -to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for -more information. -\n -" - - if use pcmcia; then - DOC_CONTENTS+=' -For PCMCIA cards:\n -All files needed for a PCMCIA board were copied to /etc/pcmcia. -You may wish to edit the options passed to the gpib_config call in the -/etc/pcmcia/linux-gpib-pcmcia script. -You may need to send a SIGHUP signal to the cardmgr daemon to force it -to reload the files in /etc/pcmcia \(alternatively you could use your -pcmcia init.d script to restart the cardmgr, or you could just reboot\). -The driver module will be loaded as needed by the cardmgr. - -' - fi - - if use firmware; then - DOC_CONTENTS+=' -For Agilent \(HP\) 82341C and 82341D cards: -The firmware for these boards is uploaded by passing the appropriate -firmware file from /usr/share/linux-gpib/hp_82341 directory to -gpib_config using the -I or --init-data command line option. Example:\n -gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin -' - fi - - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog - udev_pkg_postinst -} diff --git a/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild b/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild new file mode 100644 index 000000000000..d086849d6aee --- /dev/null +++ b/sci-libs/linux-gpib/linux-gpib-4.3.6-r3.ebuild @@ -0,0 +1,189 @@ +# Copyright 1999-2024 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +PYTHON_COMPAT=( python3_{10..12} ) + +inherit readme.gentoo-r1 autotools perl-functions python-single-r1 udev + +# Check for latest firmware version on bump +FW_PV="2008-08-10" + +DESCRIPTION="Driver library for GPIB (IEEE 488.2) hardware" +HOMEPAGE="https://linux-gpib.sourceforge.io/" +SRC_URI="https://downloads.sourceforge.net/linux-gpib/${P}.tar.gz + firmware? ( https://linux-gpib.sourceforge.io/firmware/gpib_firmware-${FW_PV}.tar.gz ) +" +S="${WORKDIR}/${PN}-user-${PV}" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~amd64 ~arm ~x86" +IUSE="pcmcia static guile perl php python tcl doc firmware" +REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" + +COMMONDEPEND=" + sys-libs/readline:= + tcl? ( dev-lang/tcl:0= ) + guile? ( dev-scheme/guile:12 ) + perl? ( dev-lang/perl:= ) + php? ( dev-lang/php:= ) + python? ( ${PYTHON_DEPS} ) + firmware? ( sys-apps/fxload ) +" +RDEPEND="${COMMONDEPEND} + acct-group/gpib + ~sci-libs/linux-gpib-modules-${PV} +" +DEPEND="${COMMONDEPEND}" +BDEPEND=" + virtual/pkgconfig + doc? ( app-text/docbook-sgml-utils ) + perl? ( virtual/perl-ExtUtils-MakeMaker ) +" + +PATCHES=( + "${FILESDIR}"/${PN}-4.3.0-perl.patch +) + +pkg_setup() { + use perl && perl_set_version + use python && python_setup +} + +src_unpack() { + default + unpack "${WORKDIR}/${P}/${PN}-user-${PV}.tar.gz" +} + +src_prepare() { + default + + # We have to use --root instead of --prefix for setup.py. + # Otherwise the python files are not installed properly into site-packages. + sed -i -e \ + 's/--prefix=$(DESTDIR)$(prefix)/--root=$(DESTDIR)/g' \ + language/python/Makefile.am || die + + eautoreconf +} + +src_configure() { + econf \ + $(use_enable static) \ + $(use_enable guile guile-binding) \ + $(use_enable perl perl-binding) \ + $(use_enable php php-binding) \ + $(use_enable python python-binding) \ + $(use_enable tcl tcl-binding) \ + $(use_enable doc documentation) +} + +src_install() { + # PYTHONDONTWRITEBYTECODE=0 is required, otherwise + # installation of the python files is skipped + FIRM_DIR=/usr/share/usb + emake \ + DESTDIR="${ED}" \ + INSTALL_MOD_PATH="${ED}" \ + HOTPLUG_USB_CONF_DIR=/etc/hotplug/usb \ + UDEV_RULES_DIR="$(get_udevdir)"/rules.d \ + USB_FIRMWARE_DIR=${FIRM_DIR} \ + PYTHONDONTWRITEBYTECODE=0 \ + docdir="/usr/share/doc/${PF}/html" install + + if use perl; then + einfo "Installing perl module" + cd "${S}"/language/perl || die + emake DESTDIR="${ED}" install + perl_fix_packlist + perl_delete_emptybsdir + cd "${S}" || die + fi + + echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >> 99-gpib.rules + udev_dorules 99-gpib.rules + + dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS + + insinto /etc + newins util/templates/gpib.conf gpib.conf + newins util/templates/gpib.conf gpib.conf.example + + if use pcmcia; then + insinto /etc/pcmcia + doins "${S}"/etc/pcmcia/* + fi + + # fix rules files + local f + find "${ED}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f ; do + grep -q "${ED}" "${f}" && einfo "File ${f} contains a temporary path, fixing." + sed -i -e "s:${ED}:/:g" "${f}" + done + + # remove .la files + find "${ED}" -name '*.la' -delete || die + + DOC_CONTENTS=" +As the udev rules were changed and refactored in this release it is +necessary to remove any manually installed pre-4.3.0 gpib udev rules files +in /etc/udev/rules.d/. The files to remove are: +\n + 99-agilent_82357a.rules\n + 99-gpib-generic.rules\n + 99-ni_usb_gpib.rules\n +\n +You need to run the 'gpib_config' utility to setup the driver before +you can use it. In order to do it automatically you can add to your +start script something like this (supposing the appropriate driver +is loaded on the startup): +\n + gpib_config --minor 0 +\n +To give a user access to the computer's gpib board you will have to add +them to the group 'gpib' or, you could change the permissions on the device +files /dev/gpib[0-15] to something you like better, using 'chmod' +\n +Edit /etc/gpib.conf to match your interface board, and any devices you wish +to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for +more information. +\n +" + + if use pcmcia; then + DOC_CONTENTS+=' +For PCMCIA cards:\n +All files needed for a PCMCIA board were copied to /etc/pcmcia. +You may wish to edit the options passed to the gpib_config call in the +/etc/pcmcia/linux-gpib-pcmcia script. +You may need to send a SIGHUP signal to the cardmgr daemon to force it +to reload the files in /etc/pcmcia \(alternatively you could use your +pcmcia init.d script to restart the cardmgr, or you could just reboot\). +The driver module will be loaded as needed by the cardmgr. + +' + fi + + if use firmware; then + DOC_CONTENTS+=' +For Agilent \(HP\) 82341C and 82341D cards: +The firmware for these boards is uploaded by passing the appropriate +firmware file from /usr/share/linux-gpib/hp_82341 directory to +gpib_config using the -I or --init-data command line option. Example:\n +gpib_config --minor 0 --init-data /usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin +' + fi + + readme.gentoo_create_doc +} + +pkg_postinst() { + readme.gentoo_print_elog + udev_reload +} + +pkg_postrm() { + udev_reload +} -- cgit v1.2.3