From a1392efe64137262023d92492396ca9156d22396 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Fri, 13 Sep 2019 17:45:37 +0100 Subject: gentoo resync : 13.09.2019 --- sys-kernel/mips-sources/Manifest | 12 +- .../mips-sources/mips-sources-4.14.135.ebuild | 346 -------------------- .../mips-sources/mips-sources-4.14.143.ebuild | 346 ++++++++++++++++++++ .../mips-sources/mips-sources-4.4.186.ebuild | 350 --------------------- .../mips-sources/mips-sources-4.4.192.ebuild | 350 +++++++++++++++++++++ .../mips-sources/mips-sources-4.9.186.ebuild | 346 -------------------- .../mips-sources/mips-sources-4.9.192.ebuild | 346 ++++++++++++++++++++ 7 files changed, 1048 insertions(+), 1048 deletions(-) delete mode 100644 sys-kernel/mips-sources/mips-sources-4.14.135.ebuild create mode 100644 sys-kernel/mips-sources/mips-sources-4.14.143.ebuild delete mode 100644 sys-kernel/mips-sources/mips-sources-4.4.186.ebuild create mode 100644 sys-kernel/mips-sources/mips-sources-4.4.192.ebuild delete mode 100644 sys-kernel/mips-sources/mips-sources-4.9.186.ebuild create mode 100644 sys-kernel/mips-sources/mips-sources-4.9.192.ebuild (limited to 'sys-kernel/mips-sources') diff --git a/sys-kernel/mips-sources/Manifest b/sys-kernel/mips-sources/Manifest index 4801a8218ae3..f86554267429 100644 --- a/sys-kernel/mips-sources/Manifest +++ b/sys-kernel/mips-sources/Manifest @@ -13,14 +13,14 @@ DIST mipsgit-4.17.0-20180705.diff.xz 1008 BLAKE2B 07d316dd9dd0c16033763d066e4d70 DIST mipsgit-4.18.0-20181112.diff.xz 996 BLAKE2B 4f233173c587bf717229b469a0f25c172a72987bfbd0fc38723ec6483293ae966867274ef1799039fa7c0e2425678df525361e608c6f659edd3c6701406a8603 SHA512 b5abf06bc6d9bb80bd51670885b9639fdd2a489dadbc45b99f221025a2f4bf2e0ec70691c5ee840b1d73d655fad152244b8aa4988eec519389caebff8c93d0d9 DIST mipsgit-4.4.0-20160123.diff.xz 1908 BLAKE2B a8be92376d1360246359e8d3674fa30727363297d0f3c1f1fa41ad031235fcd59cfca3fa8645d2fd8ab34fcb79b49f622a28eaddd80da76cf23afc05970d7bae SHA512 0086c470064dd4e5c2fefd8161b70200475659fe925e68d374ff139b506147c39163f366be689bbb92a9aaf72e8c58cdaaaff5def6718c5e87ff7e047551a1f8 DIST mipsgit-4.9.0-20161216.diff.xz 1120 BLAKE2B 1207d943aa39d157cf1ed87918082fe53c26e5342f8249cce1c21b47d38d9a33ec3fb024cb6358cb659e8630e58840d67570be731fb05e9124d86387793e045b SHA512 d1d8d95661d349826e2978d2259df9e30dbd6779a6506fe769dd8e60699e8461920b290a2064a432b8c3bd95888854f4dbcc2ba40929c58f0dd165fcb7894e15 -DIST patch-4.14.135.xz 2774180 BLAKE2B 3afa8750e0d93b06d56c521accdd3cd3173e652650829511ab885aad2ab0f7edb99b1f7cf74c332c6d2cae9018fbd8e7be167f5ff33d303ec5060081a6919298 SHA512 a49e93d5849a603899886fe9a2bf953fe0b84713fd1cbea17de9a595d351b2254f18509775a5b7dad4a591c10b67ba1165da4acd82cd9fcf11ced1f0a579fe7a +DIST patch-4.14.143.xz 2854228 BLAKE2B 5b5383d9b7fe94bec33d66b4f733fb44657a807eeb63abc79ec19d127c2216543ce75abaedcd9a6ae151288a6be13b6d250d4d40ee329d00bfa4344ece93424a SHA512 ccbeab5d2f7f985067e8d88cf5a42fbc44a2f379914a9f92bcd6a0823d8f501d6de278806128f218d94ba68f296c7c9b7b5c824c8808fbdcabc8697b69178edb DIST patch-4.17.19.xz 463572 BLAKE2B 6097f24f8663ade71204d83e4b89bc15f3d0b0f906cb4a0e6a9aa32705fdbd7e8855337acca37697ef93bb3f2c696ce60bab2d4e02f1e20a0113ca02c7df61a7 SHA512 57fab939df862c3807d1ddd6461b19f85b3c0aba83203f327cf174f9d6e33c79e996362cabbb44014e03fe1eb77cf0232944927ae95aa1e51ef43b153d6343ab DIST patch-4.18.20.xz 652212 BLAKE2B 7351cd9ee275fe7687e0260262763faa54fdbec9ec2c6cbc2d8169b900227ab82851ed43f3d1052a6e59b547380a19488dec4e8e64ba2985c0a460dad96124ec SHA512 c44403f5fb71a0dcbc8c39037cfc982d73edc2f411ec9cef0eb0220d422ef369b57e849e9047bea1ca734fa4706483e72c0e91a4be0c31e4df45223b388091d4 -DIST patch-4.4.186.xz 2623620 BLAKE2B 0b1569f17c1dc2eac7b83d5a65381f219f594d62a38df3e6b3c011aa81627e38c0080231630f9a288dbf17e6ab0012a74554c16646fb61676e4420a966e4efd8 SHA512 e548d0986a679750446fbbbf86269bc01447a4cccd350890978d56d35b43eaf02c2aad22852fb99e9a04ac7474d873a9d1a931638e52c222a492360562b5bfc1 -DIST patch-4.9.186.xz 2852924 BLAKE2B 4bb1fe840352a3e2ddbd0f6fff4b4c8bbf7b97dbed194b7ca80f6f73687188ac61c2e5a06d1bf3f8b702fb3ad8309a19a05b2c4969d00abeb9e5bc19ff8eda2c SHA512 140d50ab6aa00f17bf4c7818c241fdd46665a82a5f1d50caed61b25d16a13606a3a7419e42a67ed2a8326fdd3f68fafe95330daf8b883e83903df56a5d1c088b -EBUILD mips-sources-4.14.135.ebuild 13150 BLAKE2B a37b1f923b099f31d59fe7926e40495642266d9c82359e716767d5c8747b8cdc733e3061cb499f5735c1ea1dff08690a456bf847af4d01350c564177cb981ef1 SHA512 7a30811d0a454dd07508442a0f60852e6d9b60c00218c1807d23ee7fc1eeef5d564c5501eec97124f5c53ea5c8addcd13f90d17d3f0eaaa29054fb5410c6710e +DIST patch-4.4.192.xz 2704412 BLAKE2B 022847be3a4ccdfe48b7e7e30a739646b20147c2b679bed4e83abfb282c028586d7bb07640ea5948f45e23c8d22595c51c43829844d13a166024c5036b09c086 SHA512 ae2b74783ec9dbb7e8d4f7b467ede4e09256dc7dff0a90b966e3739a2b0535964f9527cde162411cc101295a32e53317ef182f752fd2fd4a0bafc2f046ad0266 +DIST patch-4.9.192.xz 2960500 BLAKE2B dc5055b6ed7f8b8111c5341d353ca1cc07558c5f0595d39cc4f395b1c0166d23587c896b439139c641cd31fd486709e38a52ce777345b9f14f30aa011c8db958 SHA512 aeddc83f898c1eb1a3aab3ebee766c7b6b3d5e12833ac7ef30e6547988cabdd8acffc9d6c835ed850db07e452f7a5f45123c678c9e5030c8c7cae734e0bb0b9e +EBUILD mips-sources-4.14.143.ebuild 13150 BLAKE2B a37b1f923b099f31d59fe7926e40495642266d9c82359e716767d5c8747b8cdc733e3061cb499f5735c1ea1dff08690a456bf847af4d01350c564177cb981ef1 SHA512 7a30811d0a454dd07508442a0f60852e6d9b60c00218c1807d23ee7fc1eeef5d564c5501eec97124f5c53ea5c8addcd13f90d17d3f0eaaa29054fb5410c6710e EBUILD mips-sources-4.17.19.ebuild 13153 BLAKE2B 7731959134d8ed3c69ce521be818b74208fbfe8e2df636351bcf167a05e9cdd882aad7fddb59d1f56c79334be721cdd01b353123832d192e726cfdfcd1ce78d7 SHA512 d200632ff5c6b7cec9b72d93ac7ed7f3225f4ec5886543eb62f6416ee4d2678429b0e013f6f7f87c0093ef6e088060523523d7e13db4d99088fb64f67b2cf973 EBUILD mips-sources-4.18.20.ebuild 13150 BLAKE2B 525002df7b5e36e99157154b8e9070a382f0d7d49d15a658d6e23b8e6417aa690f6dcfec94d76c515a531b2b330b0447105a7b3fecf7dd9cafeace69448e63a7 SHA512 f812dcc5a8869066ffb7bf70c1d15cf232b5cea1ec21aff9f5ce0cefd6c59cc2b4eb0ae455f52b5d3c21250619f5df898f79ba493a166ac6d3a1815dc4e5b066 -EBUILD mips-sources-4.4.186.ebuild 13244 BLAKE2B 6e74f1196f83588ec27ccee72eb1afe1a8056e4e4adecdf3fdf2d0d8b91a09c33cfd1097b524e493b722ff69774f2e7b48ec81f6fd3857a07b945c01cb38cf36 SHA512 aa7cf8489450bfbdb4d76ec60888ca63e96d12e6cadc8d8243f430ff14e6568eb5eb28dd5372f8a5581b1fbd8925d4e5065b8249782a2f6a2373cecbf25827ef -EBUILD mips-sources-4.9.186.ebuild 13146 BLAKE2B 22d64471acb97b5c18c1074de6423215f9cca88b2515ef3d13f0cc2673ce079d39f0c358945f61ae27152ea401f71659d5e17f12f8010ed5752381d2052ee7cf SHA512 9e13951b8213b983c5d4d8bb0f85fa79ee994948af18f11ae4aaecffe81ff6307825ba06c187fec724cd5464b23c9ae5989dd75617109a26a63cae959586d341 +EBUILD mips-sources-4.4.192.ebuild 13244 BLAKE2B 6e74f1196f83588ec27ccee72eb1afe1a8056e4e4adecdf3fdf2d0d8b91a09c33cfd1097b524e493b722ff69774f2e7b48ec81f6fd3857a07b945c01cb38cf36 SHA512 aa7cf8489450bfbdb4d76ec60888ca63e96d12e6cadc8d8243f430ff14e6568eb5eb28dd5372f8a5581b1fbd8925d4e5065b8249782a2f6a2373cecbf25827ef +EBUILD mips-sources-4.9.192.ebuild 13146 BLAKE2B 22d64471acb97b5c18c1074de6423215f9cca88b2515ef3d13f0cc2673ce079d39f0c358945f61ae27152ea401f71659d5e17f12f8010ed5752381d2052ee7cf SHA512 9e13951b8213b983c5d4d8bb0f85fa79ee994948af18f11ae4aaecffe81ff6307825ba06c187fec724cd5464b23c9ae5989dd75617109a26a63cae959586d341 MISC metadata.xml 791 BLAKE2B 8f6a800e1ce23fc8d8fa9a2e93f29c7161c30770ed2ed7345e1175d06a44298c645020317f6e21eac3d798edf4b2a72eaca8ae32207ad62c2e151e9d87c8cd07 SHA512 8a8f75a760d1ca13dc53038271236e16801136db499d52f97cedf0120077d06870750f51440f5cf765bbc8bc1cbc8745b354f467c582e219c58be3e700ee29cf diff --git a/sys-kernel/mips-sources/mips-sources-4.14.135.ebuild b/sys-kernel/mips-sources/mips-sources-4.14.135.ebuild deleted file mode 100644 index b35a060561ac..000000000000 --- a/sys-kernel/mips-sources/mips-sources-4.14.135.ebuild +++ /dev/null @@ -1,346 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -# EAPI Version -EAPI="6" - -#//------------------------------------------------------------------------------ - -# Version Data -GITDATE="20180128" # Date of diff between kernel.org and lmo GIT -GENPATCHREV="2" # Tarball revision for patches - -# Directories -S="${WORKDIR}/linux-${OKV}-${GITDATE}" -MIPS_PATCHES="${WORKDIR}/mips-patches" - -# Kernel-2 Vars -K_SECURITY_UNSUPPORTED="yes" -K_NOUSENAME="yes" -K_NOSETEXTRAVERSION="yes" -K_NOUSEPR="yes" -K_BASE_VER="4.13" -K_FROM_GIT="yes" -ETYPE="sources" - -# Inherit Eclasses -inherit kernel-2 eutils eapi7-ver -detect_version - -# Version Data -F_KV="${PVR}" -BASE_KV="$(ver_cut 1-2).0" -[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" - -# Portage Vars -HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" -KEYWORDS="-* ~mips" -IUSE="experimental ip27 ip28 ip30" -RDEPEND="" -DEPEND="${RDEPEND} - >=sys-devel/gcc-4.7.0 - >=sys-devel/patch-2.7.4" - -# Specify any patches or patch familes to NOT apply here. -# Use only the 4-digit number followed by a '*'. -P_EXCLUDE="" - -# Machine Support Control Variables -DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) -DO_IP27="yes" # IP27 support (SGI Origin) -DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) -DO_IP30="yes" # IP30 support (SGI Octane) -DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) - -# Machine Stable Version Variables -SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version -SV_IP27="" # DO_IP27 == "no", IP27 -SV_IP28="" # DO_IP28 == "no", IP28 -SV_IP30="" # DO_IP30 == "no", IP30 -SV_IP32="" # DO_IP32 == "no", IP32 - -DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" -SRC_URI="${KERNEL_URI} - mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz - mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - -UNIPATCH_STRICTORDER="yes" -UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" - -#//------------------------------------------------------------------------------ - -err_disabled_mach() { - # Get args - local m_name="${1}" - local m_abbr="${2}" - local m_use="${3}" - local is_test="${4}" - - # Get stable version, if exists - local stable_ver="SV_${m_abbr}" - stable_ver="${!stable_ver}" - - # See if this machine needs a USE passed or skip dying - local has_use - [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " - - # Print error && (maybe) die - echo -e "" - if [ "${is_test}" != "test" ]; then - eerror "${m_name} Support has been disabled in this ebuild" - eerror "revision. If you wish to merge ${m_name} sources, then" - eerror "run ${has_use}emerge =mips-sources-${stable_ver}" - [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." - else - ewarn "${m_name} Support has been marked as needing testing in this" - ewarn "ebuild revision. This usually means that any patches to support" - ewarn "${m_name} have been forward ported and maybe even compile-tested," - ewarn "but not yet booted on real hardware, possibly due to a lack of access" - ewarn "to such hardware. If you happen to boot this kernel and have no" - ewarn "problems at all, then please inform the maintainer. Otherwise, if" - ewarn "experience a bug, an oops/panic, or some other oddity, then please" - ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." - fi - - return 0 -} - -err_only_one_mach_allowed() { - echo -e "" - eerror "A patchset for a specific machine-type has already been selected." - eerror "No other patches for machines-types are permitted. You will need a" - eerror "separate copy of the kernel sources for each different machine-type" - eerror "you want to build a kernel for." - die "Only one machine-type patchset allowed" -} - -pkg_postinst() { - # Symlink /usr/src/linux as appropriate - local my_ksrc="${S##*/}" - for x in {ip27,ip28,ip30}; do - use ${x} && my_ksrc="${my_ksrc}.${x}" - done - - if [ ! -e "${ROOT}usr/src/linux" ]; then - rm -f "${ROOT}usr/src/linux" - ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" - fi -} - -pkg_setup() { - local arch_is_selected="no" - local m_ip m_enable m_name - - # Exclusive machine patchsets - # These are not allowed to be mixed together, thus only one of them may be applied - # to a tree per merge. - for x in \ - "ip27 SGI Origin 200/2000" \ - "ip28 SGI Indigo2 Impact R10000" \ - "ip30 SGI Octane" - do - set -- ${x} # Set positional params - m_ip="${1}" # Grab the first param (HW IP for SGI) - shift # Shift the positions - m_name="${*}" # Get the rest (Name) - - if use ${m_ip}; then - # Fetch the value indiciating if the machine is enabled or not - m_enable="DO_${m_ip/ip/IP}" - m_enable="${!m_enable}" - - # Make sure only one of these exclusive machine patches is selected - [ "${arch_is_selected}" = "no" ] \ - && arch_is_selected="yes" \ - || err_only_one_mach_allowed - - # Is the machine support disabled or marked as needing testing? - [ "${m_enable}" = "test" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" - [ "${m_enable}" = "no" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" - - # Show relevant information about the machine - show_${m_ip}_info - fi - done - - # All other systems that don't have a USE flag go here - # These systems have base-line support included in linux-mips git, so - # instead of failing, if disabled, we simply warn the user - if [ "${arch_is_selected}" = "no" ]; then - [ "${DO_IP22}" = "no" ] \ - && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ - || show_ip22_info - [ "${DO_IP32}" = "no" ] \ - && err_disabled_mach "SGI O2" "IP32" "skip" \ - || show_ip32_info - - fi -} - -show_ip22_info() { - echo -e "" - einfo "IP22 systems with an R5000 processor should work with this release." - einfo "The R4x00 series of processors tend to be rather flaky, especially the" - einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." - einfo "" - einfo "Some Notes:" - einfo "\t- Supported graphics card right now is Newport (XL)." - einfo "\t- A driver for Extreme (XZ) does not exist at present." - echo -e "" -} - -show_ip27_info() { - echo -e "" - ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" - ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" - ewarn "unknown at this time. Please report any oops messages from this" - ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" - echo -e "" -} - -show_ip28_info() { - echo -e "" - einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," - einfo "due to the R10000 Speculative Execution issue that exists with this machine," - einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" - einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" - einfo "feedback that can be used to trace down the crash." - echo -e "" -} - -show_ip30_info() { - echo -e "" - eerror "Things that DON'T work:" - eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" - eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." - eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." - eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" - eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" - eerror "\t\040\040addresses to 31-bits when converted into physical addresses." - eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." - echo -e "" - ewarn "Things that might work, but have problems, or are unknown:" - ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" - ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" - ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" - ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" - ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" - ewarn "\t\040\040after powering it down for at least 30 seconds." - ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" - ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," - ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" - ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" - ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" - ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." - ewarn "\t- UHCI Cards are known to have issues, but should still function." - ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" - ewarn "\t\040\040adapters." - ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" - ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" - ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" - ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" - ewarn "\t\040\040appreciated and patches welcome." - ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" - ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" - ewarn "\t\040\040video conversion boards as well." - echo -e "" - einfo "Things that DO work:" - einfo "\t- SMP works again, celebrate!" - einfo "\t- Impact (MGRAS) console only." - einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." - einfo "\t- PCI Card Cages should work for many devices, except certain types like" - einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." - einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" - einfo "\t\040\040report any problems with these devices." - echo -e "" -} - -show_ip32_info() { - echo -e "" - einfo "IP32 systems function well, however there are some notes:" - einfo "\t- A sound driver now exists for IP32. Celebrate!" - einfo "\t- Framebuffer console is limited to 4MB. Anything greater" - einfo "\t\040\040specified when building the kernel will likely oops" - einfo "\t\040\040or panic the kernel." - einfo "\t- X support is limited to the generic fbdev driver. No X" - einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" - einfo "\t\040\040patches!" - echo -e "" - - einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" - einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." - einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." -} - -src_unpack() { - # Unpack the kernel sources, update to the latest rev (if needed), - # and apply the latest patch from linux-mips git. - kernel-2_src_unpack - - # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. - echo -e "" - cd "${WORKDIR}" - unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - - # Create a new folder called 'patch-symlinks' and create symlinks to - # all mips-patches in there. If we want to exclude a patch, we'll - # just delete the symlink instead of the actual patch. - local psym="patch-symlinks" - mkdir "${psym}" - cd "${psym}" - for x in ../mips-patches-${BASE_KV}/*.patch; do - ln -s "${x}" "${x##../mips-patches-*/}" - done - - # With symlinks created, setup the variables referencing external - # machine patches and if a machine USE flag is enabled, then unset - # its corresponding variable. - # See 0000_README for the patch numbers and their meanings. - local p_generic="51*" - local p_ip27="52*" p_ip28="53*" p_ip30="54*" - local p_xp="80*" - use ip27 && unset p_generic p_ip27 - use ip28 && unset p_ip28 - use ip30 && unset p_generic p_ip30 - use experimental && unset p_xp - - # Remove symlinks for any patches that we don't want applied. We - # do this by looping through all the above variables, and deleting - # matching symlinks that point to the corresponding patches. - # The remaining symlinks will be applied to the kernel source. - # - # $P_EXCLUDE is a new var that can be set in an ebuild to exclude - # specific patches by wildcarding the patch number. - local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" - for x in $patchlist; - do rm -f "./${x}" - done - - # Rename the source tree to match the linux-mips git checkout date and - # machine type. - local fkv="${F_KV%-*}" - local v="${fkv}-${GITDATE}" - for x in {ip27,ip28,ip30}; do - use ${x} && v="${v}.${x}" && break - done - mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die - S="${WORKDIR}/linux-${v}" - - # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE - EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" - unpack_set_extraversion -} - -src_prepare() { - local psym="patch-symlinks" - - # Now go into the kernel source and patch it. - cd "${S}" - epatch -p1 "${WORKDIR}/${psym}"/*.patch - - eapply_user -} - -#//------------------------------------------------------------------------------ diff --git a/sys-kernel/mips-sources/mips-sources-4.14.143.ebuild b/sys-kernel/mips-sources/mips-sources-4.14.143.ebuild new file mode 100644 index 000000000000..b35a060561ac --- /dev/null +++ b/sys-kernel/mips-sources/mips-sources-4.14.143.ebuild @@ -0,0 +1,346 @@ +# Copyright 1999-2019 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +# EAPI Version +EAPI="6" + +#//------------------------------------------------------------------------------ + +# Version Data +GITDATE="20180128" # Date of diff between kernel.org and lmo GIT +GENPATCHREV="2" # Tarball revision for patches + +# Directories +S="${WORKDIR}/linux-${OKV}-${GITDATE}" +MIPS_PATCHES="${WORKDIR}/mips-patches" + +# Kernel-2 Vars +K_SECURITY_UNSUPPORTED="yes" +K_NOUSENAME="yes" +K_NOSETEXTRAVERSION="yes" +K_NOUSEPR="yes" +K_BASE_VER="4.13" +K_FROM_GIT="yes" +ETYPE="sources" + +# Inherit Eclasses +inherit kernel-2 eutils eapi7-ver +detect_version + +# Version Data +F_KV="${PVR}" +BASE_KV="$(ver_cut 1-2).0" +[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" + +# Portage Vars +HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" +KEYWORDS="-* ~mips" +IUSE="experimental ip27 ip28 ip30" +RDEPEND="" +DEPEND="${RDEPEND} + >=sys-devel/gcc-4.7.0 + >=sys-devel/patch-2.7.4" + +# Specify any patches or patch familes to NOT apply here. +# Use only the 4-digit number followed by a '*'. +P_EXCLUDE="" + +# Machine Support Control Variables +DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) +DO_IP27="yes" # IP27 support (SGI Origin) +DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) +DO_IP30="yes" # IP30 support (SGI Octane) +DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) + +# Machine Stable Version Variables +SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version +SV_IP27="" # DO_IP27 == "no", IP27 +SV_IP28="" # DO_IP28 == "no", IP28 +SV_IP30="" # DO_IP30 == "no", IP30 +SV_IP32="" # DO_IP32 == "no", IP32 + +DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" +SRC_URI="${KERNEL_URI} + mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz + mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + +UNIPATCH_STRICTORDER="yes" +UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" + +#//------------------------------------------------------------------------------ + +err_disabled_mach() { + # Get args + local m_name="${1}" + local m_abbr="${2}" + local m_use="${3}" + local is_test="${4}" + + # Get stable version, if exists + local stable_ver="SV_${m_abbr}" + stable_ver="${!stable_ver}" + + # See if this machine needs a USE passed or skip dying + local has_use + [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " + + # Print error && (maybe) die + echo -e "" + if [ "${is_test}" != "test" ]; then + eerror "${m_name} Support has been disabled in this ebuild" + eerror "revision. If you wish to merge ${m_name} sources, then" + eerror "run ${has_use}emerge =mips-sources-${stable_ver}" + [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." + else + ewarn "${m_name} Support has been marked as needing testing in this" + ewarn "ebuild revision. This usually means that any patches to support" + ewarn "${m_name} have been forward ported and maybe even compile-tested," + ewarn "but not yet booted on real hardware, possibly due to a lack of access" + ewarn "to such hardware. If you happen to boot this kernel and have no" + ewarn "problems at all, then please inform the maintainer. Otherwise, if" + ewarn "experience a bug, an oops/panic, or some other oddity, then please" + ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." + fi + + return 0 +} + +err_only_one_mach_allowed() { + echo -e "" + eerror "A patchset for a specific machine-type has already been selected." + eerror "No other patches for machines-types are permitted. You will need a" + eerror "separate copy of the kernel sources for each different machine-type" + eerror "you want to build a kernel for." + die "Only one machine-type patchset allowed" +} + +pkg_postinst() { + # Symlink /usr/src/linux as appropriate + local my_ksrc="${S##*/}" + for x in {ip27,ip28,ip30}; do + use ${x} && my_ksrc="${my_ksrc}.${x}" + done + + if [ ! -e "${ROOT}usr/src/linux" ]; then + rm -f "${ROOT}usr/src/linux" + ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" + fi +} + +pkg_setup() { + local arch_is_selected="no" + local m_ip m_enable m_name + + # Exclusive machine patchsets + # These are not allowed to be mixed together, thus only one of them may be applied + # to a tree per merge. + for x in \ + "ip27 SGI Origin 200/2000" \ + "ip28 SGI Indigo2 Impact R10000" \ + "ip30 SGI Octane" + do + set -- ${x} # Set positional params + m_ip="${1}" # Grab the first param (HW IP for SGI) + shift # Shift the positions + m_name="${*}" # Get the rest (Name) + + if use ${m_ip}; then + # Fetch the value indiciating if the machine is enabled or not + m_enable="DO_${m_ip/ip/IP}" + m_enable="${!m_enable}" + + # Make sure only one of these exclusive machine patches is selected + [ "${arch_is_selected}" = "no" ] \ + && arch_is_selected="yes" \ + || err_only_one_mach_allowed + + # Is the machine support disabled or marked as needing testing? + [ "${m_enable}" = "test" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" + [ "${m_enable}" = "no" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" + + # Show relevant information about the machine + show_${m_ip}_info + fi + done + + # All other systems that don't have a USE flag go here + # These systems have base-line support included in linux-mips git, so + # instead of failing, if disabled, we simply warn the user + if [ "${arch_is_selected}" = "no" ]; then + [ "${DO_IP22}" = "no" ] \ + && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ + || show_ip22_info + [ "${DO_IP32}" = "no" ] \ + && err_disabled_mach "SGI O2" "IP32" "skip" \ + || show_ip32_info + + fi +} + +show_ip22_info() { + echo -e "" + einfo "IP22 systems with an R5000 processor should work with this release." + einfo "The R4x00 series of processors tend to be rather flaky, especially the" + einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." + einfo "" + einfo "Some Notes:" + einfo "\t- Supported graphics card right now is Newport (XL)." + einfo "\t- A driver for Extreme (XZ) does not exist at present." + echo -e "" +} + +show_ip27_info() { + echo -e "" + ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" + ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" + ewarn "unknown at this time. Please report any oops messages from this" + ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" + echo -e "" +} + +show_ip28_info() { + echo -e "" + einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," + einfo "due to the R10000 Speculative Execution issue that exists with this machine," + einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" + einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" + einfo "feedback that can be used to trace down the crash." + echo -e "" +} + +show_ip30_info() { + echo -e "" + eerror "Things that DON'T work:" + eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" + eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." + eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." + eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" + eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" + eerror "\t\040\040addresses to 31-bits when converted into physical addresses." + eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." + echo -e "" + ewarn "Things that might work, but have problems, or are unknown:" + ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" + ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" + ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" + ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" + ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" + ewarn "\t\040\040after powering it down for at least 30 seconds." + ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" + ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," + ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" + ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" + ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" + ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." + ewarn "\t- UHCI Cards are known to have issues, but should still function." + ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" + ewarn "\t\040\040adapters." + ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" + ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" + ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" + ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" + ewarn "\t\040\040appreciated and patches welcome." + ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" + ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" + ewarn "\t\040\040video conversion boards as well." + echo -e "" + einfo "Things that DO work:" + einfo "\t- SMP works again, celebrate!" + einfo "\t- Impact (MGRAS) console only." + einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." + einfo "\t- PCI Card Cages should work for many devices, except certain types like" + einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." + einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" + einfo "\t\040\040report any problems with these devices." + echo -e "" +} + +show_ip32_info() { + echo -e "" + einfo "IP32 systems function well, however there are some notes:" + einfo "\t- A sound driver now exists for IP32. Celebrate!" + einfo "\t- Framebuffer console is limited to 4MB. Anything greater" + einfo "\t\040\040specified when building the kernel will likely oops" + einfo "\t\040\040or panic the kernel." + einfo "\t- X support is limited to the generic fbdev driver. No X" + einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" + einfo "\t\040\040patches!" + echo -e "" + + einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" + einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." + einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." +} + +src_unpack() { + # Unpack the kernel sources, update to the latest rev (if needed), + # and apply the latest patch from linux-mips git. + kernel-2_src_unpack + + # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. + echo -e "" + cd "${WORKDIR}" + unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + + # Create a new folder called 'patch-symlinks' and create symlinks to + # all mips-patches in there. If we want to exclude a patch, we'll + # just delete the symlink instead of the actual patch. + local psym="patch-symlinks" + mkdir "${psym}" + cd "${psym}" + for x in ../mips-patches-${BASE_KV}/*.patch; do + ln -s "${x}" "${x##../mips-patches-*/}" + done + + # With symlinks created, setup the variables referencing external + # machine patches and if a machine USE flag is enabled, then unset + # its corresponding variable. + # See 0000_README for the patch numbers and their meanings. + local p_generic="51*" + local p_ip27="52*" p_ip28="53*" p_ip30="54*" + local p_xp="80*" + use ip27 && unset p_generic p_ip27 + use ip28 && unset p_ip28 + use ip30 && unset p_generic p_ip30 + use experimental && unset p_xp + + # Remove symlinks for any patches that we don't want applied. We + # do this by looping through all the above variables, and deleting + # matching symlinks that point to the corresponding patches. + # The remaining symlinks will be applied to the kernel source. + # + # $P_EXCLUDE is a new var that can be set in an ebuild to exclude + # specific patches by wildcarding the patch number. + local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" + for x in $patchlist; + do rm -f "./${x}" + done + + # Rename the source tree to match the linux-mips git checkout date and + # machine type. + local fkv="${F_KV%-*}" + local v="${fkv}-${GITDATE}" + for x in {ip27,ip28,ip30}; do + use ${x} && v="${v}.${x}" && break + done + mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die + S="${WORKDIR}/linux-${v}" + + # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE + EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" + unpack_set_extraversion +} + +src_prepare() { + local psym="patch-symlinks" + + # Now go into the kernel source and patch it. + cd "${S}" + epatch -p1 "${WORKDIR}/${psym}"/*.patch + + eapply_user +} + +#//------------------------------------------------------------------------------ diff --git a/sys-kernel/mips-sources/mips-sources-4.4.186.ebuild b/sys-kernel/mips-sources/mips-sources-4.4.186.ebuild deleted file mode 100644 index a06155ed17a5..000000000000 --- a/sys-kernel/mips-sources/mips-sources-4.4.186.ebuild +++ /dev/null @@ -1,350 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -# EAPI Version -EAPI="6" - -#//------------------------------------------------------------------------------ - -# Version Data -GITDATE="20160123" # Date of diff between kernel.org and lmo GIT -GENPATCHREV="2" # Tarball revision for patches - -# Directories -S="${WORKDIR}/linux-${OKV}-${GITDATE}" -MIPS_PATCHES="${WORKDIR}/mips-patches" - -# Kernel-2 Vars -K_SECURITY_UNSUPPORTED="yes" -K_NOUSENAME="yes" -K_NOSETEXTRAVERSION="yes" -K_NOUSEPR="yes" -K_BASE_VER="4.3" -K_FROM_GIT="yes" -ETYPE="sources" - -# Inherit Eclasses -inherit kernel-2 eutils eapi7-ver -detect_version - -# EPATCH Vars -# XXX: Required to properly apply Impact/Odyssey driver patches. -EPATCH_OPTS="-F3" - -# Version Data -F_KV="${PVR}" -BASE_KV="$(ver_cut 1-2).0" -[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" - -# Portage Vars -HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" -KEYWORDS="-* ~mips" -IUSE="experimental ip27 ip28 ip30" -RDEPEND="" -DEPEND="${RDEPEND} - >=sys-devel/gcc-4.7.0 - >=sys-devel/patch-2.7.4" - -# Specify any patches or patch familes to NOT apply here. -# Use only the 4-digit number followed by a '*'. -P_EXCLUDE="" - -# Machine Support Control Variables -DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) -DO_IP27="yes" # IP27 support (SGI Origin) -DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) -DO_IP30="yes" # IP30 support (SGI Octane) -DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) - -# Machine Stable Version Variables -SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version -SV_IP27="" # DO_IP27 == "no", IP27 -SV_IP28="" # DO_IP28 == "no", IP28 -SV_IP30="" # DO_IP30 == "no", IP30 -SV_IP32="" # DO_IP32 == "no", IP32 - -DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" -SRC_URI="${KERNEL_URI} - mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz - mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - -UNIPATCH_STRICTORDER="yes" -UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" - -#//------------------------------------------------------------------------------ - -err_disabled_mach() { - # Get args - local m_name="${1}" - local m_abbr="${2}" - local m_use="${3}" - local is_test="${4}" - - # Get stable version, if exists - local stable_ver="SV_${m_abbr}" - stable_ver="${!stable_ver}" - - # See if this machine needs a USE passed or skip dying - local has_use - [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " - - # Print error && (maybe) die - echo -e "" - if [ "${is_test}" != "test" ]; then - eerror "${m_name} Support has been disabled in this ebuild" - eerror "revision. If you wish to merge ${m_name} sources, then" - eerror "run ${has_use}emerge =mips-sources-${stable_ver}" - [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." - else - ewarn "${m_name} Support has been marked as needing testing in this" - ewarn "ebuild revision. This usually means that any patches to support" - ewarn "${m_name} have been forward ported and maybe even compile-tested," - ewarn "but not yet booted on real hardware, possibly due to a lack of access" - ewarn "to such hardware. If you happen to boot this kernel and have no" - ewarn "problems at all, then please inform the maintainer. Otherwise, if" - ewarn "experience a bug, an oops/panic, or some other oddity, then please" - ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." - fi - - return 0 -} - -err_only_one_mach_allowed() { - echo -e "" - eerror "A patchset for a specific machine-type has already been selected." - eerror "No other patches for machines-types are permitted. You will need a" - eerror "separate copy of the kernel sources for each different machine-type" - eerror "you want to build a kernel for." - die "Only one machine-type patchset allowed" -} - -pkg_postinst() { - # Symlink /usr/src/linux as appropriate - local my_ksrc="${S##*/}" - for x in {ip27,ip28,ip30}; do - use ${x} && my_ksrc="${my_ksrc}.${x}" - done - - if [ ! -e "${ROOT}usr/src/linux" ]; then - rm -f "${ROOT}usr/src/linux" - ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" - fi -} - -pkg_setup() { - local arch_is_selected="no" - local m_ip m_enable m_name - - # Exclusive machine patchsets - # These are not allowed to be mixed together, thus only one of them may be applied - # to a tree per merge. - for x in \ - "ip27 SGI Origin 200/2000" \ - "ip28 SGI Indigo2 Impact R10000" \ - "ip30 SGI Octane" - do - set -- ${x} # Set positional params - m_ip="${1}" # Grab the first param (HW IP for SGI) - shift # Shift the positions - m_name="${*}" # Get the rest (Name) - - if use ${m_ip}; then - # Fetch the value indiciating if the machine is enabled or not - m_enable="DO_${m_ip/ip/IP}" - m_enable="${!m_enable}" - - # Make sure only one of these exclusive machine patches is selected - [ "${arch_is_selected}" = "no" ] \ - && arch_is_selected="yes" \ - || err_only_one_mach_allowed - - # Is the machine support disabled or marked as needing testing? - [ "${m_enable}" = "test" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" - [ "${m_enable}" = "no" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" - - # Show relevant information about the machine - show_${m_ip}_info - fi - done - - # All other systems that don't have a USE flag go here - # These systems have base-line support included in linux-mips git, so - # instead of failing, if disabled, we simply warn the user - if [ "${arch_is_selected}" = "no" ]; then - [ "${DO_IP22}" = "no" ] \ - && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ - || show_ip22_info - [ "${DO_IP32}" = "no" ] \ - && err_disabled_mach "SGI O2" "IP32" "skip" \ - || show_ip32_info - - fi -} - -show_ip22_info() { - echo -e "" - einfo "IP22 systems with an R5000 processor should work with this release." - einfo "The R4x00 series of processors tend to be rather flaky, especially the" - einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." - einfo "" - einfo "Some Notes:" - einfo "\t- Supported graphics card right now is Newport (XL)." - einfo "\t- A driver for Extreme (XZ) does not exist at present." - echo -e "" -} - -show_ip27_info() { - echo -e "" - ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" - ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" - ewarn "unknown at this time. Please report any oops messages from this" - ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" - echo -e "" -} - -show_ip28_info() { - echo -e "" - einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," - einfo "due to the R10000 Speculative Execution issue that exists with this machine," - einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" - einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" - einfo "feedback that can be used to trace down the crash." - echo -e "" -} - -show_ip30_info() { - echo -e "" - eerror "Things that DON'T work:" - eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" - eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." - eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." - eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" - eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" - eerror "\t\040\040addresses to 31-bits when converted into physical addresses." - eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." - echo -e "" - ewarn "Things that might work, but have problems, or are unknown:" - ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" - ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" - ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" - ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" - ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" - ewarn "\t\040\040after powering it down for at least 30 seconds." - ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" - ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," - ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" - ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" - ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" - ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." - ewarn "\t- UHCI Cards are known to have issues, but should still function." - ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" - ewarn "\t\040\040adapters." - ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" - ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" - ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" - ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" - ewarn "\t\040\040appreciated and patches welcome." - ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" - ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" - ewarn "\t\040\040video conversion boards as well." - echo -e "" - einfo "Things that DO work:" - einfo "\t- SMP works again, celebrate!" - einfo "\t- Impact (MGRAS) console only." - einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." - einfo "\t- PCI Card Cages should work for many devices, except certain types like" - einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." - einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" - einfo "\t\040\040report any problems with these devices." - echo -e "" -} - -show_ip32_info() { - echo -e "" - einfo "IP32 systems function well, however there are some notes:" - einfo "\t- A sound driver now exists for IP32. Celebrate!" - einfo "\t- Framebuffer console is limited to 4MB. Anything greater" - einfo "\t\040\040specified when building the kernel will likely oops" - einfo "\t\040\040or panic the kernel." - einfo "\t- X support is limited to the generic fbdev driver. No X" - einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" - einfo "\t\040\040patches!" - echo -e "" - - einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" - einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." - einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." -} - -src_unpack() { - # Unpack the kernel sources, update to the latest rev (if needed), - # and apply the latest patch from linux-mips git. - kernel-2_src_unpack - - # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. - echo -e "" - cd "${WORKDIR}" - unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - - # Create a new folder called 'patch-symlinks' and create symlinks to - # all mips-patches in there. If we want to exclude a patch, we'll - # just delete the symlink instead of the actual patch. - local psym="patch-symlinks" - mkdir "${psym}" - cd "${psym}" - for x in ../mips-patches-${BASE_KV}/*.patch; do - ln -s "${x}" "${x##../mips-patches-*/}" - done - - # With symlinks created, setup the variables referencing external - # machine patches and if a machine USE flag is enabled, then unset - # its corresponding variable. - # See 0000_README for the patch numbers and their meanings. - local p_generic="51*" - local p_ip27="52*" p_ip28="53*" p_ip30="54*" - local p_xp="80*" - use ip27 && unset p_generic p_ip27 - use ip28 && unset p_ip28 - use ip30 && unset p_generic p_ip30 - use experimental && unset p_xp - - # Remove symlinks for any patches that we don't want applied. We - # do this by looping through all the above variables, and deleting - # matching symlinks that point to the corresponding patches. - # The remaining symlinks will be applied to the kernel source. - # - # $P_EXCLUDE is a new var that can be set in an ebuild to exclude - # specific patches by wildcarding the patch number. - local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" - for x in $patchlist; - do rm -f "./${x}" - done - - # Rename the source tree to match the linux-mips git checkout date and - # machine type. - local fkv="${F_KV%-*}" - local v="${fkv}-${GITDATE}" - for x in {ip27,ip28,ip30}; do - use ${x} && v="${v}.${x}" && break - done - mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die - S="${WORKDIR}/linux-${v}" - - # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE - EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" - unpack_set_extraversion -} - -src_prepare() { - local psym="patch-symlinks" - - # Now go into the kernel source and patch it. - cd "${S}" - epatch "${WORKDIR}/${psym}"/*.patch - - eapply_user -} - -#//------------------------------------------------------------------------------ diff --git a/sys-kernel/mips-sources/mips-sources-4.4.192.ebuild b/sys-kernel/mips-sources/mips-sources-4.4.192.ebuild new file mode 100644 index 000000000000..a06155ed17a5 --- /dev/null +++ b/sys-kernel/mips-sources/mips-sources-4.4.192.ebuild @@ -0,0 +1,350 @@ +# Copyright 1999-2019 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +# EAPI Version +EAPI="6" + +#//------------------------------------------------------------------------------ + +# Version Data +GITDATE="20160123" # Date of diff between kernel.org and lmo GIT +GENPATCHREV="2" # Tarball revision for patches + +# Directories +S="${WORKDIR}/linux-${OKV}-${GITDATE}" +MIPS_PATCHES="${WORKDIR}/mips-patches" + +# Kernel-2 Vars +K_SECURITY_UNSUPPORTED="yes" +K_NOUSENAME="yes" +K_NOSETEXTRAVERSION="yes" +K_NOUSEPR="yes" +K_BASE_VER="4.3" +K_FROM_GIT="yes" +ETYPE="sources" + +# Inherit Eclasses +inherit kernel-2 eutils eapi7-ver +detect_version + +# EPATCH Vars +# XXX: Required to properly apply Impact/Odyssey driver patches. +EPATCH_OPTS="-F3" + +# Version Data +F_KV="${PVR}" +BASE_KV="$(ver_cut 1-2).0" +[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" + +# Portage Vars +HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" +KEYWORDS="-* ~mips" +IUSE="experimental ip27 ip28 ip30" +RDEPEND="" +DEPEND="${RDEPEND} + >=sys-devel/gcc-4.7.0 + >=sys-devel/patch-2.7.4" + +# Specify any patches or patch familes to NOT apply here. +# Use only the 4-digit number followed by a '*'. +P_EXCLUDE="" + +# Machine Support Control Variables +DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) +DO_IP27="yes" # IP27 support (SGI Origin) +DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) +DO_IP30="yes" # IP30 support (SGI Octane) +DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) + +# Machine Stable Version Variables +SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version +SV_IP27="" # DO_IP27 == "no", IP27 +SV_IP28="" # DO_IP28 == "no", IP28 +SV_IP30="" # DO_IP30 == "no", IP30 +SV_IP32="" # DO_IP32 == "no", IP32 + +DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" +SRC_URI="${KERNEL_URI} + mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz + mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + +UNIPATCH_STRICTORDER="yes" +UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" + +#//------------------------------------------------------------------------------ + +err_disabled_mach() { + # Get args + local m_name="${1}" + local m_abbr="${2}" + local m_use="${3}" + local is_test="${4}" + + # Get stable version, if exists + local stable_ver="SV_${m_abbr}" + stable_ver="${!stable_ver}" + + # See if this machine needs a USE passed or skip dying + local has_use + [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " + + # Print error && (maybe) die + echo -e "" + if [ "${is_test}" != "test" ]; then + eerror "${m_name} Support has been disabled in this ebuild" + eerror "revision. If you wish to merge ${m_name} sources, then" + eerror "run ${has_use}emerge =mips-sources-${stable_ver}" + [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." + else + ewarn "${m_name} Support has been marked as needing testing in this" + ewarn "ebuild revision. This usually means that any patches to support" + ewarn "${m_name} have been forward ported and maybe even compile-tested," + ewarn "but not yet booted on real hardware, possibly due to a lack of access" + ewarn "to such hardware. If you happen to boot this kernel and have no" + ewarn "problems at all, then please inform the maintainer. Otherwise, if" + ewarn "experience a bug, an oops/panic, or some other oddity, then please" + ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." + fi + + return 0 +} + +err_only_one_mach_allowed() { + echo -e "" + eerror "A patchset for a specific machine-type has already been selected." + eerror "No other patches for machines-types are permitted. You will need a" + eerror "separate copy of the kernel sources for each different machine-type" + eerror "you want to build a kernel for." + die "Only one machine-type patchset allowed" +} + +pkg_postinst() { + # Symlink /usr/src/linux as appropriate + local my_ksrc="${S##*/}" + for x in {ip27,ip28,ip30}; do + use ${x} && my_ksrc="${my_ksrc}.${x}" + done + + if [ ! -e "${ROOT}usr/src/linux" ]; then + rm -f "${ROOT}usr/src/linux" + ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" + fi +} + +pkg_setup() { + local arch_is_selected="no" + local m_ip m_enable m_name + + # Exclusive machine patchsets + # These are not allowed to be mixed together, thus only one of them may be applied + # to a tree per merge. + for x in \ + "ip27 SGI Origin 200/2000" \ + "ip28 SGI Indigo2 Impact R10000" \ + "ip30 SGI Octane" + do + set -- ${x} # Set positional params + m_ip="${1}" # Grab the first param (HW IP for SGI) + shift # Shift the positions + m_name="${*}" # Get the rest (Name) + + if use ${m_ip}; then + # Fetch the value indiciating if the machine is enabled or not + m_enable="DO_${m_ip/ip/IP}" + m_enable="${!m_enable}" + + # Make sure only one of these exclusive machine patches is selected + [ "${arch_is_selected}" = "no" ] \ + && arch_is_selected="yes" \ + || err_only_one_mach_allowed + + # Is the machine support disabled or marked as needing testing? + [ "${m_enable}" = "test" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" + [ "${m_enable}" = "no" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" + + # Show relevant information about the machine + show_${m_ip}_info + fi + done + + # All other systems that don't have a USE flag go here + # These systems have base-line support included in linux-mips git, so + # instead of failing, if disabled, we simply warn the user + if [ "${arch_is_selected}" = "no" ]; then + [ "${DO_IP22}" = "no" ] \ + && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ + || show_ip22_info + [ "${DO_IP32}" = "no" ] \ + && err_disabled_mach "SGI O2" "IP32" "skip" \ + || show_ip32_info + + fi +} + +show_ip22_info() { + echo -e "" + einfo "IP22 systems with an R5000 processor should work with this release." + einfo "The R4x00 series of processors tend to be rather flaky, especially the" + einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." + einfo "" + einfo "Some Notes:" + einfo "\t- Supported graphics card right now is Newport (XL)." + einfo "\t- A driver for Extreme (XZ) does not exist at present." + echo -e "" +} + +show_ip27_info() { + echo -e "" + ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" + ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" + ewarn "unknown at this time. Please report any oops messages from this" + ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" + echo -e "" +} + +show_ip28_info() { + echo -e "" + einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," + einfo "due to the R10000 Speculative Execution issue that exists with this machine," + einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" + einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" + einfo "feedback that can be used to trace down the crash." + echo -e "" +} + +show_ip30_info() { + echo -e "" + eerror "Things that DON'T work:" + eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" + eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." + eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." + eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" + eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" + eerror "\t\040\040addresses to 31-bits when converted into physical addresses." + eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." + echo -e "" + ewarn "Things that might work, but have problems, or are unknown:" + ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" + ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" + ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" + ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" + ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" + ewarn "\t\040\040after powering it down for at least 30 seconds." + ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" + ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," + ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" + ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" + ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" + ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." + ewarn "\t- UHCI Cards are known to have issues, but should still function." + ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" + ewarn "\t\040\040adapters." + ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" + ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" + ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" + ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" + ewarn "\t\040\040appreciated and patches welcome." + ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" + ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" + ewarn "\t\040\040video conversion boards as well." + echo -e "" + einfo "Things that DO work:" + einfo "\t- SMP works again, celebrate!" + einfo "\t- Impact (MGRAS) console only." + einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." + einfo "\t- PCI Card Cages should work for many devices, except certain types like" + einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." + einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" + einfo "\t\040\040report any problems with these devices." + echo -e "" +} + +show_ip32_info() { + echo -e "" + einfo "IP32 systems function well, however there are some notes:" + einfo "\t- A sound driver now exists for IP32. Celebrate!" + einfo "\t- Framebuffer console is limited to 4MB. Anything greater" + einfo "\t\040\040specified when building the kernel will likely oops" + einfo "\t\040\040or panic the kernel." + einfo "\t- X support is limited to the generic fbdev driver. No X" + einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" + einfo "\t\040\040patches!" + echo -e "" + + einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" + einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." + einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." +} + +src_unpack() { + # Unpack the kernel sources, update to the latest rev (if needed), + # and apply the latest patch from linux-mips git. + kernel-2_src_unpack + + # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. + echo -e "" + cd "${WORKDIR}" + unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + + # Create a new folder called 'patch-symlinks' and create symlinks to + # all mips-patches in there. If we want to exclude a patch, we'll + # just delete the symlink instead of the actual patch. + local psym="patch-symlinks" + mkdir "${psym}" + cd "${psym}" + for x in ../mips-patches-${BASE_KV}/*.patch; do + ln -s "${x}" "${x##../mips-patches-*/}" + done + + # With symlinks created, setup the variables referencing external + # machine patches and if a machine USE flag is enabled, then unset + # its corresponding variable. + # See 0000_README for the patch numbers and their meanings. + local p_generic="51*" + local p_ip27="52*" p_ip28="53*" p_ip30="54*" + local p_xp="80*" + use ip27 && unset p_generic p_ip27 + use ip28 && unset p_ip28 + use ip30 && unset p_generic p_ip30 + use experimental && unset p_xp + + # Remove symlinks for any patches that we don't want applied. We + # do this by looping through all the above variables, and deleting + # matching symlinks that point to the corresponding patches. + # The remaining symlinks will be applied to the kernel source. + # + # $P_EXCLUDE is a new var that can be set in an ebuild to exclude + # specific patches by wildcarding the patch number. + local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" + for x in $patchlist; + do rm -f "./${x}" + done + + # Rename the source tree to match the linux-mips git checkout date and + # machine type. + local fkv="${F_KV%-*}" + local v="${fkv}-${GITDATE}" + for x in {ip27,ip28,ip30}; do + use ${x} && v="${v}.${x}" && break + done + mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die + S="${WORKDIR}/linux-${v}" + + # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE + EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" + unpack_set_extraversion +} + +src_prepare() { + local psym="patch-symlinks" + + # Now go into the kernel source and patch it. + cd "${S}" + epatch "${WORKDIR}/${psym}"/*.patch + + eapply_user +} + +#//------------------------------------------------------------------------------ diff --git a/sys-kernel/mips-sources/mips-sources-4.9.186.ebuild b/sys-kernel/mips-sources/mips-sources-4.9.186.ebuild deleted file mode 100644 index 6ed3f51e8622..000000000000 --- a/sys-kernel/mips-sources/mips-sources-4.9.186.ebuild +++ /dev/null @@ -1,346 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -# EAPI Version -EAPI="6" - -#//------------------------------------------------------------------------------ - -# Version Data -GITDATE="20161216" # Date of diff between kernel.org and lmo GIT -GENPATCHREV="2" # Tarball revision for patches - -# Directories -S="${WORKDIR}/linux-${OKV}-${GITDATE}" -MIPS_PATCHES="${WORKDIR}/mips-patches" - -# Kernel-2 Vars -K_SECURITY_UNSUPPORTED="yes" -K_NOUSENAME="yes" -K_NOSETEXTRAVERSION="yes" -K_NOUSEPR="yes" -K_BASE_VER="4.8" -K_FROM_GIT="yes" -ETYPE="sources" - -# Inherit Eclasses -inherit kernel-2 eutils eapi7-ver -detect_version - -# Version Data -F_KV="${PVR}" -BASE_KV="$(ver_cut 1-2).0" -[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" - -# Portage Vars -HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" -KEYWORDS="-* ~mips" -IUSE="experimental ip27 ip28 ip30" -RDEPEND="" -DEPEND="${RDEPEND} - >=sys-devel/gcc-4.7.0 - >=sys-devel/patch-2.7.4" - -# Specify any patches or patch familes to NOT apply here. -# Use only the 4-digit number followed by a '*'. -P_EXCLUDE="" - -# Machine Support Control Variables -DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) -DO_IP27="yes" # IP27 support (SGI Origin) -DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) -DO_IP30="yes" # IP30 support (SGI Octane) -DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) - -# Machine Stable Version Variables -SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version -SV_IP27="" # DO_IP27 == "no", IP27 -SV_IP28="" # DO_IP28 == "no", IP28 -SV_IP30="" # DO_IP30 == "no", IP30 -SV_IP32="" # DO_IP32 == "no", IP32 - -DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" -SRC_URI="${KERNEL_URI} - mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz - mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - -UNIPATCH_STRICTORDER="yes" -UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" - -#//------------------------------------------------------------------------------ - -err_disabled_mach() { - # Get args - local m_name="${1}" - local m_abbr="${2}" - local m_use="${3}" - local is_test="${4}" - - # Get stable version, if exists - local stable_ver="SV_${m_abbr}" - stable_ver="${!stable_ver}" - - # See if this machine needs a USE passed or skip dying - local has_use - [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " - - # Print error && (maybe) die - echo -e "" - if [ "${is_test}" != "test" ]; then - eerror "${m_name} Support has been disabled in this ebuild" - eerror "revision. If you wish to merge ${m_name} sources, then" - eerror "run ${has_use}emerge =mips-sources-${stable_ver}" - [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." - else - ewarn "${m_name} Support has been marked as needing testing in this" - ewarn "ebuild revision. This usually means that any patches to support" - ewarn "${m_name} have been forward ported and maybe even compile-tested," - ewarn "but not yet booted on real hardware, possibly due to a lack of access" - ewarn "to such hardware. If you happen to boot this kernel and have no" - ewarn "problems at all, then please inform the maintainer. Otherwise, if" - ewarn "experience a bug, an oops/panic, or some other oddity, then please" - ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." - fi - - return 0 -} - -err_only_one_mach_allowed() { - echo -e "" - eerror "A patchset for a specific machine-type has already been selected." - eerror "No other patches for machines-types are permitted. You will need a" - eerror "separate copy of the kernel sources for each different machine-type" - eerror "you want to build a kernel for." - die "Only one machine-type patchset allowed" -} - -pkg_postinst() { - # Symlink /usr/src/linux as appropriate - local my_ksrc="${S##*/}" - for x in {ip27,ip28,ip30}; do - use ${x} && my_ksrc="${my_ksrc}.${x}" - done - - if [ ! -e "${ROOT}usr/src/linux" ]; then - rm -f "${ROOT}usr/src/linux" - ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" - fi -} - -pkg_setup() { - local arch_is_selected="no" - local m_ip m_enable m_name - - # Exclusive machine patchsets - # These are not allowed to be mixed together, thus only one of them may be applied - # to a tree per merge. - for x in \ - "ip27 SGI Origin 200/2000" \ - "ip28 SGI Indigo2 Impact R10000" \ - "ip30 SGI Octane" - do - set -- ${x} # Set positional params - m_ip="${1}" # Grab the first param (HW IP for SGI) - shift # Shift the positions - m_name="${*}" # Get the rest (Name) - - if use ${m_ip}; then - # Fetch the value indiciating if the machine is enabled or not - m_enable="DO_${m_ip/ip/IP}" - m_enable="${!m_enable}" - - # Make sure only one of these exclusive machine patches is selected - [ "${arch_is_selected}" = "no" ] \ - && arch_is_selected="yes" \ - || err_only_one_mach_allowed - - # Is the machine support disabled or marked as needing testing? - [ "${m_enable}" = "test" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" - [ "${m_enable}" = "no" ] \ - && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" - - # Show relevant information about the machine - show_${m_ip}_info - fi - done - - # All other systems that don't have a USE flag go here - # These systems have base-line support included in linux-mips git, so - # instead of failing, if disabled, we simply warn the user - if [ "${arch_is_selected}" = "no" ]; then - [ "${DO_IP22}" = "no" ] \ - && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ - || show_ip22_info - [ "${DO_IP32}" = "no" ] \ - && err_disabled_mach "SGI O2" "IP32" "skip" \ - || show_ip32_info - - fi -} - -show_ip22_info() { - echo -e "" - einfo "IP22 systems with an R5000 processor should work with this release." - einfo "The R4x00 series of processors tend to be rather flaky, especially the" - einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." - einfo "" - einfo "Some Notes:" - einfo "\t- Supported graphics card right now is Newport (XL)." - einfo "\t- A driver for Extreme (XZ) does not exist at present." - echo -e "" -} - -show_ip27_info() { - echo -e "" - ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" - ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" - ewarn "unknown at this time. Please report any oops messages from this" - ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" - echo -e "" -} - -show_ip28_info() { - echo -e "" - einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," - einfo "due to the R10000 Speculative Execution issue that exists with this machine," - einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" - einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" - einfo "feedback that can be used to trace down the crash." - echo -e "" -} - -show_ip30_info() { - echo -e "" - eerror "Things that DON'T work:" - eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" - eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." - eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." - eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" - eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" - eerror "\t\040\040addresses to 31-bits when converted into physical addresses." - eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." - echo -e "" - ewarn "Things that might work, but have problems, or are unknown:" - ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" - ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" - ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" - ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" - ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" - ewarn "\t\040\040after powering it down for at least 30 seconds." - ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" - ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," - ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" - ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" - ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" - ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." - ewarn "\t- UHCI Cards are known to have issues, but should still function." - ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" - ewarn "\t\040\040adapters." - ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" - ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" - ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" - ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" - ewarn "\t\040\040appreciated and patches welcome." - ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" - ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" - ewarn "\t\040\040video conversion boards as well." - echo -e "" - einfo "Things that DO work:" - einfo "\t- SMP works again, celebrate!" - einfo "\t- Impact (MGRAS) console only." - einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." - einfo "\t- PCI Card Cages should work for many devices, except certain types like" - einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." - einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" - einfo "\t\040\040report any problems with these devices." - echo -e "" -} - -show_ip32_info() { - echo -e "" - einfo "IP32 systems function well, however there are some notes:" - einfo "\t- A sound driver now exists for IP32. Celebrate!" - einfo "\t- Framebuffer console is limited to 4MB. Anything greater" - einfo "\t\040\040specified when building the kernel will likely oops" - einfo "\t\040\040or panic the kernel." - einfo "\t- X support is limited to the generic fbdev driver. No X" - einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" - einfo "\t\040\040patches!" - echo -e "" - - einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" - einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." - einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." -} - -src_unpack() { - # Unpack the kernel sources, update to the latest rev (if needed), - # and apply the latest patch from linux-mips git. - kernel-2_src_unpack - - # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. - echo -e "" - cd "${WORKDIR}" - unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" - - # Create a new folder called 'patch-symlinks' and create symlinks to - # all mips-patches in there. If we want to exclude a patch, we'll - # just delete the symlink instead of the actual patch. - local psym="patch-symlinks" - mkdir "${psym}" - cd "${psym}" - for x in ../mips-patches-${BASE_KV}/*.patch; do - ln -s "${x}" "${x##../mips-patches-*/}" - done - - # With symlinks created, setup the variables referencing external - # machine patches and if a machine USE flag is enabled, then unset - # its corresponding variable. - # See 0000_README for the patch numbers and their meanings. - local p_generic="51*" - local p_ip27="52*" p_ip28="53*" p_ip30="54*" - local p_xp="80*" - use ip27 && unset p_generic p_ip27 - use ip28 && unset p_ip28 - use ip30 && unset p_generic p_ip30 - use experimental && unset p_xp - - # Remove symlinks for any patches that we don't want applied. We - # do this by looping through all the above variables, and deleting - # matching symlinks that point to the corresponding patches. - # The remaining symlinks will be applied to the kernel source. - # - # $P_EXCLUDE is a new var that can be set in an ebuild to exclude - # specific patches by wildcarding the patch number. - local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" - for x in $patchlist; - do rm -f "./${x}" - done - - # Rename the source tree to match the linux-mips git checkout date and - # machine type. - local fkv="${F_KV%-*}" - local v="${fkv}-${GITDATE}" - for x in {ip27,ip28,ip30}; do - use ${x} && v="${v}.${x}" && break - done - mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die - S="${WORKDIR}/linux-${v}" - - # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE - EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" - unpack_set_extraversion -} - -src_prepare() { - local psym="patch-symlinks" - - # Now go into the kernel source and patch it. - cd "${S}" - epatch "${WORKDIR}/${psym}"/*.patch - - eapply_user -} - -#//------------------------------------------------------------------------------ diff --git a/sys-kernel/mips-sources/mips-sources-4.9.192.ebuild b/sys-kernel/mips-sources/mips-sources-4.9.192.ebuild new file mode 100644 index 000000000000..6ed3f51e8622 --- /dev/null +++ b/sys-kernel/mips-sources/mips-sources-4.9.192.ebuild @@ -0,0 +1,346 @@ +# Copyright 1999-2019 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +# EAPI Version +EAPI="6" + +#//------------------------------------------------------------------------------ + +# Version Data +GITDATE="20161216" # Date of diff between kernel.org and lmo GIT +GENPATCHREV="2" # Tarball revision for patches + +# Directories +S="${WORKDIR}/linux-${OKV}-${GITDATE}" +MIPS_PATCHES="${WORKDIR}/mips-patches" + +# Kernel-2 Vars +K_SECURITY_UNSUPPORTED="yes" +K_NOUSENAME="yes" +K_NOSETEXTRAVERSION="yes" +K_NOUSEPR="yes" +K_BASE_VER="4.8" +K_FROM_GIT="yes" +ETYPE="sources" + +# Inherit Eclasses +inherit kernel-2 eutils eapi7-ver +detect_version + +# Version Data +F_KV="${PVR}" +BASE_KV="$(ver_cut 1-2).0" +[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}" + +# Portage Vars +HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/" +KEYWORDS="-* ~mips" +IUSE="experimental ip27 ip28 ip30" +RDEPEND="" +DEPEND="${RDEPEND} + >=sys-devel/gcc-4.7.0 + >=sys-devel/patch-2.7.4" + +# Specify any patches or patch familes to NOT apply here. +# Use only the 4-digit number followed by a '*'. +P_EXCLUDE="" + +# Machine Support Control Variables +DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00) +DO_IP27="yes" # IP27 support (SGI Origin) +DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000) +DO_IP30="yes" # IP30 support (SGI Octane) +DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only) + +# Machine Stable Version Variables +SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version +SV_IP27="" # DO_IP27 == "no", IP27 +SV_IP28="" # DO_IP28 == "no", IP28 +SV_IP30="" # DO_IP30 == "no", IP30 +SV_IP32="" # DO_IP32 == "no", IP32 + +DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}" +SRC_URI="${KERNEL_URI} + mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz + mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + +UNIPATCH_STRICTORDER="yes" +UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz" + +#//------------------------------------------------------------------------------ + +err_disabled_mach() { + # Get args + local m_name="${1}" + local m_abbr="${2}" + local m_use="${3}" + local is_test="${4}" + + # Get stable version, if exists + local stable_ver="SV_${m_abbr}" + stable_ver="${!stable_ver}" + + # See if this machine needs a USE passed or skip dying + local has_use + [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" " + + # Print error && (maybe) die + echo -e "" + if [ "${is_test}" != "test" ]; then + eerror "${m_name} Support has been disabled in this ebuild" + eerror "revision. If you wish to merge ${m_name} sources, then" + eerror "run ${has_use}emerge =mips-sources-${stable_ver}" + [ "${m_use}" != "skip" ] && die "${m_name} Support disabled." + else + ewarn "${m_name} Support has been marked as needing testing in this" + ewarn "ebuild revision. This usually means that any patches to support" + ewarn "${m_name} have been forward ported and maybe even compile-tested," + ewarn "but not yet booted on real hardware, possibly due to a lack of access" + ewarn "to such hardware. If you happen to boot this kernel and have no" + ewarn "problems at all, then please inform the maintainer. Otherwise, if" + ewarn "experience a bug, an oops/panic, or some other oddity, then please" + ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team." + fi + + return 0 +} + +err_only_one_mach_allowed() { + echo -e "" + eerror "A patchset for a specific machine-type has already been selected." + eerror "No other patches for machines-types are permitted. You will need a" + eerror "separate copy of the kernel sources for each different machine-type" + eerror "you want to build a kernel for." + die "Only one machine-type patchset allowed" +} + +pkg_postinst() { + # Symlink /usr/src/linux as appropriate + local my_ksrc="${S##*/}" + for x in {ip27,ip28,ip30}; do + use ${x} && my_ksrc="${my_ksrc}.${x}" + done + + if [ ! -e "${ROOT}usr/src/linux" ]; then + rm -f "${ROOT}usr/src/linux" + ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux" + fi +} + +pkg_setup() { + local arch_is_selected="no" + local m_ip m_enable m_name + + # Exclusive machine patchsets + # These are not allowed to be mixed together, thus only one of them may be applied + # to a tree per merge. + for x in \ + "ip27 SGI Origin 200/2000" \ + "ip28 SGI Indigo2 Impact R10000" \ + "ip30 SGI Octane" + do + set -- ${x} # Set positional params + m_ip="${1}" # Grab the first param (HW IP for SGI) + shift # Shift the positions + m_name="${*}" # Get the rest (Name) + + if use ${m_ip}; then + # Fetch the value indiciating if the machine is enabled or not + m_enable="DO_${m_ip/ip/IP}" + m_enable="${!m_enable}" + + # Make sure only one of these exclusive machine patches is selected + [ "${arch_is_selected}" = "no" ] \ + && arch_is_selected="yes" \ + || err_only_one_mach_allowed + + # Is the machine support disabled or marked as needing testing? + [ "${m_enable}" = "test" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test" + [ "${m_enable}" = "no" ] \ + && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" + + # Show relevant information about the machine + show_${m_ip}_info + fi + done + + # All other systems that don't have a USE flag go here + # These systems have base-line support included in linux-mips git, so + # instead of failing, if disabled, we simply warn the user + if [ "${arch_is_selected}" = "no" ]; then + [ "${DO_IP22}" = "no" ] \ + && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \ + || show_ip22_info + [ "${DO_IP32}" = "no" ] \ + && err_disabled_mach "SGI O2" "IP32" "skip" \ + || show_ip32_info + + fi +} + +show_ip22_info() { + echo -e "" + einfo "IP22 systems with an R5000 processor should work with this release." + einfo "The R4x00 series of processors tend to be rather flaky, especially the" + einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400." + einfo "" + einfo "Some Notes:" + einfo "\t- Supported graphics card right now is Newport (XL)." + einfo "\t- A driver for Extreme (XZ) does not exist at present." + echo -e "" +} + +show_ip27_info() { + echo -e "" + ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()" + ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is" + ewarn "unknown at this time. Please report any oops messages from this" + ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)" + echo -e "" +} + +show_ip28_info() { + echo -e "" + einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However," + einfo "due to the R10000 Speculative Execution issue that exists with this machine," + einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}" + einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable" + einfo "feedback that can be used to trace down the crash." + echo -e "" +} + +show_ip30_info() { + echo -e "" + eerror "Things that DON'T work:" + eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting" + eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs." + eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot." + eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a" + eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA" + eerror "\t\040\040addresses to 31-bits when converted into physical addresses." + eerror "\t\040\040Patches that attempt to fix the issue are highly welcome." + echo -e "" + ewarn "Things that might work, but have problems, or are unknown:" + ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be" + ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be" + ewarn "\t\040\040selected for hugepages to work. If use of this feature continues" + ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to" + ewarn "\t\040\040disable the functionality and perform a cold reset of the machine" + ewarn "\t\040\040after powering it down for at least 30 seconds." + ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives" + ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts," + ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-" + ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on" + ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to" + ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome." + ewarn "\t- UHCI Cards are known to have issues, but should still function." + ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial" + ewarn "\t\040\040adapters." + ewarn "\t- MENET boards appear to have the four ethernet ports detected, however" + ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3" + ewarn "\t\040\040UART driver. The NIC part number is also not read correctly" + ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be" + ewarn "\t\040\040appreciated and patches welcome." + ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested" + ewarn "\t\040\040and are not guaranteed to work. This applies to various digital" + ewarn "\t\040\040video conversion boards as well." + echo -e "" + einfo "Things that DO work:" + einfo "\t- SMP works again, celebrate!" + einfo "\t- Impact (MGRAS) console only." + einfo "\t- VPro (Odyssey) console only (no X driver exists yet)." + einfo "\t- PCI Card Cages should work for many devices, except certain types like" + einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)." + einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please" + einfo "\t\040\040report any problems with these devices." + echo -e "" +} + +show_ip32_info() { + echo -e "" + einfo "IP32 systems function well, however there are some notes:" + einfo "\t- A sound driver now exists for IP32. Celebrate!" + einfo "\t- Framebuffer console is limited to 4MB. Anything greater" + einfo "\t\040\040specified when building the kernel will likely oops" + einfo "\t\040\040or panic the kernel." + einfo "\t- X support is limited to the generic fbdev driver. No X" + einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit" + einfo "\t\040\040patches!" + echo -e "" + + einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)" + einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target." + einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)." +} + +src_unpack() { + # Unpack the kernel sources, update to the latest rev (if needed), + # and apply the latest patch from linux-mips git. + kernel-2_src_unpack + + # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}. + echo -e "" + cd "${WORKDIR}" + unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz" + + # Create a new folder called 'patch-symlinks' and create symlinks to + # all mips-patches in there. If we want to exclude a patch, we'll + # just delete the symlink instead of the actual patch. + local psym="patch-symlinks" + mkdir "${psym}" + cd "${psym}" + for x in ../mips-patches-${BASE_KV}/*.patch; do + ln -s "${x}" "${x##../mips-patches-*/}" + done + + # With symlinks created, setup the variables referencing external + # machine patches and if a machine USE flag is enabled, then unset + # its corresponding variable. + # See 0000_README for the patch numbers and their meanings. + local p_generic="51*" + local p_ip27="52*" p_ip28="53*" p_ip30="54*" + local p_xp="80*" + use ip27 && unset p_generic p_ip27 + use ip28 && unset p_ip28 + use ip30 && unset p_generic p_ip30 + use experimental && unset p_xp + + # Remove symlinks for any patches that we don't want applied. We + # do this by looping through all the above variables, and deleting + # matching symlinks that point to the corresponding patches. + # The remaining symlinks will be applied to the kernel source. + # + # $P_EXCLUDE is a new var that can be set in an ebuild to exclude + # specific patches by wildcarding the patch number. + local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}" + for x in $patchlist; + do rm -f "./${x}" + done + + # Rename the source tree to match the linux-mips git checkout date and + # machine type. + local fkv="${F_KV%-*}" + local v="${fkv}-${GITDATE}" + for x in {ip27,ip28,ip30}; do + use ${x} && v="${v}.${x}" && break + done + mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die + S="${WORKDIR}/linux-${v}" + + # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE + EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}" + unpack_set_extraversion +} + +src_prepare() { + local psym="patch-symlinks" + + # Now go into the kernel source and patch it. + cd "${S}" + epatch "${WORKDIR}/${psym}"/*.patch + + eapply_user +} + +#//------------------------------------------------------------------------------ -- cgit v1.2.3