From 586819755b4dbfdffdc8a725ab7c0f86095b8489 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sat, 15 Sep 2018 17:37:09 +0100 Subject: gentoo resync : 15.09.2018 --- sys-libs/glibc/Manifest | 7 +- sys-libs/glibc/glibc-2.19-r1.ebuild | 164 ---- sys-libs/glibc/glibc-2.19-r2.ebuild | 4 +- sys-libs/glibc/glibc-2.27-r4.ebuild | 1416 ---------------------------------- sys-libs/glibc/glibc-2.27-r5.ebuild | 1418 ----------------------------------- 5 files changed, 3 insertions(+), 3006 deletions(-) delete mode 100644 sys-libs/glibc/glibc-2.19-r1.ebuild delete mode 100644 sys-libs/glibc/glibc-2.27-r4.ebuild delete mode 100644 sys-libs/glibc/glibc-2.27-r5.ebuild (limited to 'sys-libs/glibc') diff --git a/sys-libs/glibc/Manifest b/sys-libs/glibc/Manifest index 54596626080f..d28581f29880 100644 --- a/sys-libs/glibc/Manifest +++ b/sys-libs/glibc/Manifest @@ -15,7 +15,6 @@ AUX nscd.service 337 BLAKE2B 6b163465dd8db024652921892dc913da8dfc0984eec7ffce621 AUX nscd.tmpfilesd 111 BLAKE2B 4abb7220564e248fc7eeeced41077f186f42594facbfac9a4c0ff36209baac529c219ad6ead8d8aa53ab2b092002f1006a4479459b9e9a7c5a0294cb7d822100 SHA512 53b80b331e1a85d8ee16eb2ce547a7249e944926c3d1cdd4a47a5301a5c842ffc7ec1e3dc0a731542a8facf8261c1c57121802d01741aa89898a3476c09da340 DIST gcc-4.7.3-r1-multilib-bootstrap.tar.bz2 8064097 BLAKE2B 3cc5c82cd57d0fbd26d9a376ee8ca02f119fe9d653311cbe4d2b7b93aec2290adac3be271be19a7fdedae2e11e4b6e32360184e557204e100ad64357f5575d4b SHA512 40b93e194ad41a75d649d84d1c49070680f253a13f0617803243bc61c44fed1ca2d0a7572a97ebb79353f312b58b5f6360be916dd7435928cc53935082e15269 DIST gcc-multilib-bootstrap-20180511.tar.xz 2392908 BLAKE2B f3cf614399368acd8908f60d894c6344a2fa09383b30c1633a0682bc668367c8a2f8c6fec2d41b6e2178d709a2bd8db57e8b2ab56ba263c7d56f819c15acd061 SHA512 98c766e913693ab42ff790557acde2a36a8001e2648046a685b21964200df8d4d52d8452d499c0068c6648284d086ce062c2d36e2c6c2fd8aacd232d193f2853 -DIST glibc-2.19-patches-3.tar.bz2 80664 BLAKE2B fb348c711941c1bd4dadd905e172dc4f239d8b63af1a1d14dcf4ec45c504bd47e10e9b24b38f9e01796016f2e97caeeb693213ae08147274ed0a4d9501293be0 SHA512 d281d6a2757920124cf8a3f02b97e75192598b08d96ae48840df34c7ffdcb212952d171f233e6f12a429b19437d0a296212fe1f2eae164d6a1c6793cb3cb69f0 DIST glibc-2.19-patches-9.tar.bz2 24584 BLAKE2B a96e930a5bd20fa75d9f259cc2117fa5ce98072274a24a5823bf877e3739fa4c001a94d7865e065ee0527f3974430d27da8038e042340a451ad2052c62724f26 SHA512 a95b3063ade974a3556480b798b317d33c7423a8cb9e69f67249ffb8b3d3c671d70d2d5f782c1efadc0bec4cc49a96d4fe89911f3dfcd85b459f69f3b4f38f0e DIST glibc-2.19.tar.xz 12083312 BLAKE2B 9dc03346e0f0df4bf009a92d894b0a9f964ff92b7f4c9663cedf1cb6cf90435f28a15539d33791ecf43ee578fa4e26f916af0367651312ef8f9c1c38ce0dafa2 SHA512 9e021fcb3afbb9ace2a0e37fded231a62de861bd766e29d47163a03182e37add718b7acc3963d1c525f9556773e842297725715acde48dcfbaab6e756af1a23d DIST glibc-2.20-patches-5.tar.bz2 55986 BLAKE2B bad714bd088fb8759ee84d33f22c0bba01a78a401c54828dc413c7ac2a08ae53fba9b07280996e54091f2c918658bb502aeb45f734022c1ab36e1be215381324 SHA512 409f59a028127e02f0c9f91107715b540d8d234475830adc17108a02664be232098d119b43bcc8df9b328ab50c1fffb0868d510e6487ce1c34ec2c7c7a78375b @@ -32,14 +31,12 @@ DIST glibc-2.25-patches-15.tar.bz2 78320 BLAKE2B 70c62cc10db13e2844de4d8a18972e0 DIST glibc-2.25.tar.xz 13873900 BLAKE2B 73ef792fff059f6ad154c9af2155ea15b7869ec1b93e557b6c58129bfb50f863c06f8b49425d75fd2df537dd9c4a68bad790cff770c50a6889732d66f507d349 SHA512 5b7a2418d5b8a1b6a907c6c7fb6477ee2a473151cb45e03d0d4cdd9a33497c90b1ee39e2e7e885e2b25743dcd3747336ef114b4a73eb001da1fd79f29e0f9a6e DIST glibc-2.26-patches-7.tar.bz2 413976 BLAKE2B 18263201cf33abf911eb7b802ed539b217391156f897a8db50f65a69627d8f8cceded78414168986ee98eba038364a6b2f3599b23f95e7b0ad2643481c399718 SHA512 0c812a343fcc68c10d92117cb2a0cf1c255470e81f0a7a04d6db2fe35445e410ef37f15162f145c2eb772b08ab55af246f5b52f5e57c2e91038181f6f027abc3 DIST glibc-2.26.tar.xz 14682748 BLAKE2B c1c9dbec110dd4e25b2f463a96d8afc43b8e3ebfe3c958107032beaa879710252be3bc4122bb62166408725d43785f233544df6159d29cce0fc5b2c08f45adbe SHA512 6ed368523bc55f00976f96c5177f114e3f714b27273d7bffc252812c8b98fb81970403c1f5b5f0a61da678811532fb446530745492d2b49bfefc0d5bd71ce8c0 -DIST glibc-2.27-patches-2.tar.bz2 129983 BLAKE2B fad8d14f5330bc301804913f92f48051583f122cc83ab44813dc13498f59e97b38d1b276353eed9df3fde427b669cf9168632bbed8d006a3d4995c1df79575a4 SHA512 b05e34dbb45aaadfdcc079888ef2b2f70b181ba31edf2e2bbd18fa666375f5c6c48993830a305de0706b4a562db6403b6287bcab4789c1c37bc535216ee9f4cd DIST glibc-2.27-patches-3.tar.bz2 166511 BLAKE2B 1dc54bef6e82112935c7411f7a5cd07c1edb24c3edaa1e0243b846b3832a40af1ba3a7b77aef04c54a173388156b464ea442fa8310a02e6f44e2ed5b78994286 SHA512 12496e9b0c60630dbec4c2febdd6d20df1f3d7a2c243cc55b595202b27f682b9208e16cd8c387687c0cc9e18b36c3caeef8d1b1148eb3ee8081431997270db5e DIST glibc-2.27.tar.xz 15395316 BLAKE2B ea206d304c8c9aa86d69db981a14bea008602cea06a6c151c4971a8df059949ffe5632b42a67ab0ffcd7c4d7ce1ec02ac48815dac4dade1c4dd41eaee8a6ed33 SHA512 7c5581154487d38d173ce1feb944e60207139cca148bccf066eaae322c0c2d219423bdcfa15c7f9be1b5e45dfc43c641cc5d80d3c3c65837d08a83cdb4e2a147 DIST glibc-2.28-patches-1.tar.bz2 15028 BLAKE2B 4b2bcb4123a2a6d5df9c5bdf6bda29a4b7633159917d3e385bfe00d6685b71a3e42e8739a791a4ae5d88280a82227531cc6cd42536e5bd6b795f391cbcc62783 SHA512 6b9451df7a0e83e93b06ae97c564653ac17c8e0d9c78f8a0ed42750bd6e3e58938491acb018681341eb57898811dc6020fa42287e408dfd6e8189cb362e393f1 DIST glibc-2.28.tar.xz 16484344 BLAKE2B 9aa8cbd5a145c2a6fde3a60b3d0a14b12b46ed79333ad1ca3e73464adcfe700277a17a9e7fd0ca36e355a0c5b0b27decfa091da320ba802741ad75cc955bbcc8 SHA512 521f820953ff07c69ece4c2186f59fc061a7f9747932cd70ef2995c2b2deee76eeb6de700d85071cdca5949179aa8ccee75eda7feca1394121ec7b821ad0a3f3 DIST glibc-9999-patches-7.tar.bz2 15065 BLAKE2B 23dbe7b6dac30aedb8f563d492a2d44673c1a8233ac67b05a88fb9658b437eda8dff7ef8199d30ea07a0ef5d95b51a57c7db405ba3fdeab108b797caf6811d22 SHA512 ec2bee03969144e42849cb9923a11ac7dfe7418d8214243469227a97cd440c998d027d4d91b8e5d6c42fe5614f4c2fdfe4bfa06022e1e98efaa4150ca65387e2 -EBUILD glibc-2.19-r1.ebuild 5456 BLAKE2B 8d446e7b7d9c521925a2a37f1373f354991b89cc59a8e2e163cafb5d76284897cc7573b0e520f50aeda2da28d9477ae6cc3e9d42c6174c517cff7bc10a89bbda SHA512 250b5c69f0b9a3b1cf140223b1acb17d05d840c01a959c4cbc3859f2f87c86566d0d8a4a686c403058cc29c4fefdc11fec696f24de9816b35617fcb3f4666d70 -EBUILD glibc-2.19-r2.ebuild 40626 BLAKE2B 5c0a70e55df2288f7c0046005692daf1507324460ad35d0fee15048bf27069ff57a16b4c7c5110252ecfbad1e9527aec8b728a87b5b3c48d2deadd02e8fc58dd SHA512 fced8d70b3befad67b77ffa234506cea690e562fa54bae9d25610feb08585b320be0592f06cc456b836979b80b80f6c04a6500131785151a80c1313e27048ebe +EBUILD glibc-2.19-r2.ebuild 40604 BLAKE2B 8fea38d437019ff88a832d725a5fc76f58b382bc297ba13ad3c61a283a5549210307495e34fecbfcda30a5a9925416d963340c25a5e61ade4bd1637141849a53 SHA512 4ce1a7397be122d0fbb7369f8bf62599e5f8ee55a1626ce85f6f6f13a2b932c0574a7534442ed0a62c269dda07d73ba1cedf6c559a59385bc22c0f1fd406c5b9 EBUILD glibc-2.20-r2.ebuild 4924 BLAKE2B 8f2b71dd56f535915564e2517769844b234b5b02cbd4edaeb9ffd0a323e8cc7be663e6e57bad0c28df453ea332bfbb5891b07a569a0885a76c9427d680959ecd SHA512 00af5f249a1fcb0eb3ecc460ccd288daf752575df6ef3887bbffbaf3999360a24ae4058ad7e770206d8c2a86828238981d1820e28780be38481361f2f55518a8 EBUILD glibc-2.21-r2.ebuild 4899 BLAKE2B 4097f29160b437edb96e6f731c797cba43bfb65fe164c1ffc3af0025d52c18a286b9a75d56d3e371e33e87f99a71a2115ba2eba7cb174dd2787a9b6a6d84b674 SHA512 68cc49c310ff816b2433b4f9e389e992d64f623809d4a4c3391dcce7ee4c385365ef4278de79bf4b6b9a4ed969e10b94bebabe86e560295bd1c0a9652aec12ec EBUILD glibc-2.22-r4.ebuild 4950 BLAKE2B 8d048dafaf8eec034d2ed2f3a8f400b3f4aedab39d7fe11795376a135ed9a42843f9cc6888e721ef242f78bc4230188d53cdccaf7686186d43201101519cc60b SHA512 64387259f921dc26d91d5d4e86bbbbfd740bb4b2e1337c121f799370abc9c6298745f9686e6aa501b10c05150ac1129ef8bd37d140e9c83c41ac3c0f54ee052f @@ -47,8 +44,6 @@ EBUILD glibc-2.23-r4.ebuild 4949 BLAKE2B 99db0ec4a452f04a2aef9b347a5ddec03cc88fb EBUILD glibc-2.24-r4.ebuild 4988 BLAKE2B 8e08345c96e176984b73a073efca21f771d41af1af75106ec88a22bd55d7f69f28d9c01989026a3e58f3df4fac2a59db68d5ac8a8bbb0f411c75da8792f3402a SHA512 dd1d996eaf35197f7b7b6c111957eb98ef776d0a76a949b95f9bb17075dca43b2a354f8d15be133b9f3ff6c40a5b1f4ec28bd8d41c5cfc51da006eda8b005a05 EBUILD glibc-2.25-r11.ebuild 4975 BLAKE2B cef32f5d160644845e7cf45a9dd4c8cef1dcff8fca6b64c083c3e05d07533e445a6139939710b9284f7587bbf3977ca556caeb964e73ac21a382d942423d886a SHA512 f26645acc02f16209ec068641a800ef0a4ad2a422c9473e14a273fdece9b53074b837907d635a8585cf9dbb1acea14178166a4a3410aa4c70a745b89a764b6f1 EBUILD glibc-2.26-r7.ebuild 25616 BLAKE2B 924fbcb527d249abe6d5e74211d0339cacdc03db08c9504c6bcdefb4e320d3c3767708707e9dba4becc083b020db480238afa2bdd46d43a9e8cb7e23cc85d6d9 SHA512 f18bd985fef3ae83b4ea88ccc783dc7f5eaa3952218a9cbb7f9817b63d32481b7b4edc0a5c6121e792678107e348a41424f19a066923e76d2cfc43d6848c7723 -EBUILD glibc-2.27-r4.ebuild 41434 BLAKE2B ad24af35925a429c5680824554f9b388fec11f574ec6be63a327aaca485a3d80c2656d29c25c6562634580ef1f22022fb748c794d8e1b7482cef404f4f7d1e4d SHA512 58b98614032c0a7c383a833dffdb93862b30c1e19dff8d0d62c4363c5f4d18ce7edc5b481ad5ee58d12511b682c962ed8db4e411a68d069dbf340f9a23f1a268 -EBUILD glibc-2.27-r5.ebuild 41539 BLAKE2B 9f08c13a154043e34049c08d6ad003df056bb15f6079759b15589b1461f2cc7dcba1909e69e7ae705bde2e6b2d535f968770207ea9c5a96637aafaa4b55aa956 SHA512 90229d4a8b0ab9d9d72079ee51403654c3264a42caef67f710d46a80f806522a504f83427d4bcbb21666a70fd45a41d79079d6f3cc4233a1dfbcfa6e7b637c28 EBUILD glibc-2.27-r6.ebuild 41539 BLAKE2B 336165f2198d1572acdddb3c4c855c4e510938289fb62438e312320f4d3e793b9f70583cf3901f0f370f7c38756dddeb6a7349d0def99272b7f3ad2d630c43ac SHA512 38f361e8a17dd72612899dc8e69f2784b760e6a49d0b006343919d62403facb28385e6715003924248fc40f4fb448d7fb36ac14887aa7ff9e9726dec8a423a3b EBUILD glibc-2.28.ebuild 41861 BLAKE2B f747cf7117f8a629e8353fee9a5ca2ddc8a128e2722381fdbf27849ff6be676b147596d0cbea52c78edc0e4a369d0eb4cda0a4c33d8eb99b4a1ee51aef68bfda SHA512 80015c199dbb2086daf7801184ce3501838fd97265378ed732fce96ff7dda95524ababdc738d392411d35bc174522a25dd62571676cd4c09435769bb855ea990 EBUILD glibc-9999.ebuild 41861 BLAKE2B fae057c79abc53eb68b73394cb03404a8c6e33d07f3c60df52ee089322503bafa196bea96736966fe5eef8b224ee018ed26ecf0da188371a635bb676da429506 SHA512 7bd763ec64e227da5f6e8960e4d004c894bd744a0136b2f7fd3ce7b0f6cff48a9e8302a98ad5bb6cb7a86db2d2038b9c3c3a5069a11e3f7d09842c1420c53d93 diff --git a/sys-libs/glibc/glibc-2.19-r1.ebuild b/sys-libs/glibc/glibc-2.19-r1.ebuild deleted file mode 100644 index d036a728e447..000000000000 --- a/sys-libs/glibc/glibc-2.19-r1.ebuild +++ /dev/null @@ -1,164 +0,0 @@ -# Copyright 1999-2018 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=0 - -inherit toolchain-glibc - -DESCRIPTION="GNU libc6 (also called glibc2) C library" -HOMEPAGE="https://www.gnu.org/software/libc/libc.html" - -LICENSE="LGPL-2.1+ BSD HPND ISC inner-net rc PCRE" -KEYWORDS="alpha amd64 arm arm64 hppa ia64 m68k ~mips ppc ppc64 s390 sh sparc x86" -RESTRICT="strip" # strip ourself #46186 -EMULTILIB_PKG="true" - -# Configuration variables -RELEASE_VER="" -case ${PV} in -9999*) - EGIT_REPO_URIS="git://sourceware.org/git/glibc.git" - inherit git-r3 - ;; -*) - RELEASE_VER=${PV} - ;; -esac -GCC_BOOTSTRAP_VER="4.7.3-r1" -PATCH_VER="3" # Gentoo patchset -NPTL_KERN_VER=${NPTL_KERN_VER:-"2.6.16"} # min kernel version nptl requires - -IUSE="debug gd hardened multilib nscd selinux systemtap profile suid vanilla headers-only" - -# Here's how the cross-compile logic breaks down ... -# CTARGET - machine that will target the binaries -# CHOST - machine that will host the binaries -# CBUILD - machine that will build the binaries -# If CTARGET != CHOST, it means you want a libc for cross-compiling. -# If CHOST != CBUILD, it means you want to cross-compile the libc. -# CBUILD = CHOST = CTARGET - native build/install -# CBUILD != (CHOST = CTARGET) - cross-compile a native build -# (CBUILD = CHOST) != CTARGET - libc for cross-compiler -# CBUILD != CHOST != CTARGET - cross-compile a libc for a cross-compiler -# For install paths: -# CHOST = CTARGET - install into / -# CHOST != CTARGET - install into /usr/CTARGET/ - -export CBUILD=${CBUILD:-${CHOST}} -export CTARGET=${CTARGET:-${CHOST}} -if [[ ${CTARGET} == ${CHOST} ]] ; then - if [[ ${CATEGORY} == cross-* ]] ; then - export CTARGET=${CATEGORY#cross-} - fi -fi - -[[ ${CTARGET} == hppa* ]] && NPTL_KERN_VER=${NPTL_KERN_VER/2.6.16/2.6.20} - -is_crosscompile() { - [[ ${CHOST} != ${CTARGET} ]] -} - -# Why SLOT 2.2 you ask yourself while sippin your tea ? -# Everyone knows 2.2 > 0, duh. -SLOT="2.2" - -# General: We need a new-enough binutils/gcc to match upstream baseline. -# arch: we need to make sure our binutils/gcc supports TLS. -DEPEND=">=app-misc/pax-utils-0.1.10 - !' | $(tc-getCPP ${CTARGET}) ${CFLAGS} 2>&1 | grep -o '[^"]*linux/version.h') - ALT_BUILD_HEADERS=${header_path%/linux/version.h} - fi - fi - fi - echo "${ALT_BUILD_HEADERS}" -} - -alt_libdir() { - echo $(alt_prefix)/$(get_libdir) -} -alt_usrlibdir() { - echo $(alt_prefix)/usr/$(get_libdir) -} - -builddir() { - echo "${WORKDIR}/build-${ABI}-${CTARGET}-$1" -} - -do_compile_test() { - local ret save_cflags=${CFLAGS} - CFLAGS+=" $1" - shift - - pushd "${T}" >/dev/null - - rm -f glibc-test* - printf '%b' "$*" > glibc-test.c - - nonfatal emake -s glibc-test - ret=$? - - popd >/dev/null - - CFLAGS=${save_cflags} - return ${ret} -} - -do_run_test() { - local ret - - if [[ ${MERGE_TYPE} == "binary" ]] ; then - # ignore build failures when installing a binary package #324685 - do_compile_test "" "$@" 2>/dev/null || return 0 - else - if ! do_compile_test "" "$@" ; then - ewarn "Simple build failed ... assuming this is desired #324685" - return 0 - fi - fi - - pushd "${T}" >/dev/null - - ./glibc-test - ret=$? - rm -f glibc-test* - - popd >/dev/null - - return ${ret} -} - -setup_target_flags() { - # This largely mucks with compiler flags. None of which should matter - # when building up just the headers. - just_headers && return 0 - - case $(tc-arch) in - x86) - # -march needed for #185404 #199334 - # TODO: When creating the first glibc cross-compile, this test will - # always fail as it does a full link which in turn requires glibc. - # Probably also applies when changing multilib profile settings (e.g. - # enabling x86 when the profile was amd64-only previously). - # We could change main to _start and pass -nostdlib here so that we - # only test the gcc code compilation. Or we could do a compile and - # then look for the symbol via scanelf. - if ! do_compile_test "" 'void f(int i, void *p) {if (__sync_fetch_and_add(&i, 1)) f(i, p);}\nint main(){return 0;}\n' 2>/dev/null ; then - local t=${CTARGET_OPT:-${CTARGET}} - t=${t%%-*} - filter-flags '-march=*' - export CFLAGS="-march=${t} ${CFLAGS}" - einfo "Auto adding -march=${t} to CFLAGS #185404" - fi - ;; - amd64) - # -march needed for #185404 #199334 - # Note: This test only matters when the x86 ABI is enabled, so we could - # optimize a bit and elide it. - # TODO: See cross-compile issues listed above for x86. - if ! do_compile_test "${CFLAGS_x86}" 'void f(int i, void *p) {if (__sync_fetch_and_add(&i, 1)) f(i, p);}\nint main(){return 0;}\n' 2>/dev/null ; then - local t=${CTARGET_OPT:-${CTARGET}} - t=${t%%-*} - # Normally the target is x86_64-xxx, so turn that into the -march that - # gcc actually accepts. #528708 - [[ ${t} == "x86_64" ]] && t="x86-64" - filter-flags '-march=*' - # ugly, ugly, ugly. ugly. - CFLAGS_x86=$(CFLAGS=${CFLAGS_x86} filter-flags '-march=*'; echo "${CFLAGS}") - export CFLAGS_x86="${CFLAGS_x86} -march=${t}" - einfo "Auto adding -march=${t} to CFLAGS_x86 #185404" - fi - ;; - mips) - # The mips abi cannot support the GNU style hashes. #233233 - filter-ldflags -Wl,--hash-style=gnu -Wl,--hash-style=both - ;; - sparc) - # Both sparc and sparc64 can use -fcall-used-g6. -g7 is bad, though. - filter-flags "-fcall-used-g7" - append-flags "-fcall-used-g6" - - # If the CHOST is the basic one (e.g. not sparcv9-xxx already), - # try to pick a better one so glibc can use cpu-specific .S files. - # We key off the CFLAGS to get a good value. Also need to handle - # version skew. - # We can't force users to set their CHOST to their exact machine - # as many of these are not recognized by config.sub/gcc and such :(. - # Note: If the mcpu values don't scale, we might try probing CPP defines. - # Note: Should we factor in -Wa,-AvXXX flags too ? Or -mvis/etc... ? - - local cpu - case ${CTARGET} in - sparc64-*) - case $(get-flag mcpu) in - niagara[234]) - if version_is_at_least 2.8 ; then - cpu="sparc64v2" - elif version_is_at_least 2.4 ; then - cpu="sparc64v" - elif version_is_at_least 2.2.3 ; then - cpu="sparc64b" - fi - ;; - niagara) - if version_is_at_least 2.4 ; then - cpu="sparc64v" - elif version_is_at_least 2.2.3 ; then - cpu="sparc64b" - fi - ;; - ultrasparc3) - cpu="sparc64b" - ;; - *) - # We need to force at least v9a because the base build doesn't - # work with just v9. - # https://sourceware.org/bugzilla/show_bug.cgi?id=19477 - [[ -z ${cpu} ]] && append-flags "-Wa,-xarch=v9a" - ;; - esac - ;; - sparc-*) - case $(get-flag mcpu) in - niagara[234]) - if version_is_at_least 2.8 ; then - cpu="sparcv9v2" - elif version_is_at_least 2.4 ; then - cpu="sparcv9v" - elif version_is_at_least 2.2.3 ; then - cpu="sparcv9b" - else - cpu="sparcv9" - fi - ;; - niagara) - if version_is_at_least 2.4 ; then - cpu="sparcv9v" - elif version_is_at_least 2.2.3 ; then - cpu="sparcv9b" - else - cpu="sparcv9" - fi - ;; - ultrasparc3) - cpu="sparcv9b" - ;; - v9|ultrasparc) - cpu="sparcv9" - ;; - v8|supersparc|hypersparc|leon|leon3) - cpu="sparcv8" - ;; - esac - ;; - esac - [[ -n ${cpu} ]] && CTARGET_OPT="${cpu}-${CTARGET#*-}" - ;; - esac -} - -setup_flags() { - # Make sure host make.conf doesn't pollute us - if is_crosscompile || tc-is-cross-compiler ; then - CHOST=${CTARGET} strip-unsupported-flags - fi - - # Store our CFLAGS because it's changed depending on which CTARGET - # we are building when pulling glibc on a multilib profile - CFLAGS_BASE=${CFLAGS_BASE-${CFLAGS}} - CFLAGS=${CFLAGS_BASE} - CXXFLAGS_BASE=${CXXFLAGS_BASE-${CXXFLAGS}} - CXXFLAGS=${CXXFLAGS_BASE} - ASFLAGS_BASE=${ASFLAGS_BASE-${ASFLAGS}} - ASFLAGS=${ASFLAGS_BASE} - - # Over-zealous CFLAGS can often cause problems. What may work for one - # person may not work for another. To avoid a large influx of bugs - # relating to failed builds, we strip most CFLAGS out to ensure as few - # problems as possible. - strip-flags - strip-unsupported-flags - filter-flags -m32 -m64 '-mabi=*' - - # glibc aborts if rpath is set by LDFLAGS - filter-ldflags '-Wl,-rpath=*' - - # #492892 - filter-flags -frecord-gcc-switches - - unset CBUILD_OPT CTARGET_OPT - if use multilib ; then - CTARGET_OPT=$(get_abi_CTARGET) - [[ -z ${CTARGET_OPT} ]] && CTARGET_OPT=$(get_abi_CHOST) - fi - - setup_target_flags - - if [[ -n ${CTARGET_OPT} && ${CBUILD} == ${CHOST} ]] && ! is_crosscompile; then - CBUILD_OPT=${CTARGET_OPT} - fi - - # Lock glibc at -O2; we want to be conservative here. - # -fno-strict-aliasing is to work around #155906. - filter-flags '-O?' - append-flags -O2 -fno-strict-aliasing - - filter-flags '-fstack-protector*' - - # Starting with gcc-6 (and fully upstreamed pie patches) we control - # default enabled/disabled pie via use flags. So nothing to do - # here then. #618160 - if [[ $(gcc-major-version) -lt 6 ]]; then - if use hardened && tc-enables-pie ; then - # Force PIC macro definition for all compilations since they're all - # either -fPIC or -fPIE with the default-PIE compiler. - append-cppflags -DPIC - else - # Don't build -fPIE without the default-PIE compiler and the - # hardened-pie patch - filter-flags -fPIE - fi - fi -} - -want_tls() { - # Archs that can use TLS (Thread Local Storage) - case $(tc-arch) in - x86) - # requires i486 or better #106556 - [[ ${CTARGET} == i[4567]86* ]] && return 0 - return 1 - ;; - esac - return 0 -} - -want__thread() { - want_tls || return 1 - - # For some reason --with-tls --with__thread is causing segfaults on sparc32. - [[ ${PROFILE_ARCH} == "sparc" ]] && return 1 - - [[ -n ${WANT__THREAD} ]] && return ${WANT__THREAD} - - # only test gcc -- can't test linking yet - tc-has-tls -c ${CTARGET} - WANT__THREAD=$? - - return ${WANT__THREAD} -} - -use_multiarch() { - # Make sure binutils is new enough to support indirect functions, - # #336792. This funky sed supports gold and bfd linkers. - local bver nver - bver=$($(tc-getLD ${CTARGET}) -v | sed -n -r '1{s:[^0-9]*::;s:^([0-9.]*).*:\1:;p}') - case $(tc-arch ${CTARGET}) in - amd64|x86) nver="2.20" ;; - arm) nver="2.22" ;; - hppa) nver="2.23" ;; - ppc|ppc64) nver="2.20" ;; - # ifunc support was added in 2.23, but glibc also needs - # machinemode which is in 2.24. - s390) nver="2.24" ;; - sparc) nver="2.21" ;; - *) return 1 ;; - esac - version_is_at_least ${nver} ${bver} -} - -# Setup toolchain variables that had historically been defined in the -# profiles for these archs. -setup_env() { - # silly users - unset LD_RUN_PATH - unset LD_ASSUME_KERNEL - - if is_crosscompile || tc-is-cross-compiler ; then - multilib_env ${CTARGET_OPT:-${CTARGET}} - - if ! use multilib ; then - MULTILIB_ABIS=${DEFAULT_ABI} - else - MULTILIB_ABIS=${MULTILIB_ABIS:-${DEFAULT_ABI}} - fi - - # If the user has CFLAGS_ in their make.conf, use that, - # and fall back on CFLAGS. - local VAR=CFLAGS_${CTARGET//[-.]/_} - CFLAGS=${!VAR-${CFLAGS}} - einfo " $(printf '%15s' 'Manual CFLAGS:') ${CFLAGS}" - fi - - setup_flags - - export ABI=${ABI:-${DEFAULT_ABI:-default}} - - if use headers-only ; then - # Avoid mixing host's CC and target's CFLAGS_${ABI}: - # At this bootstrap stage we have only binutils for - # target but not compiler yet. - einfo "Skip CC ABI injection. We can't use (cross-)compiler yet." - return 0 - fi - local VAR=CFLAGS_${ABI} - # We need to export CFLAGS with abi information in them because glibc's - # configure script checks CFLAGS for some targets (like mips). Keep - # around the original clean value to avoid appending multiple ABIs on - # top of each other. - : ${__GLIBC_CC:=$(tc-getCC ${CTARGET_OPT:-${CTARGET}})} - export __GLIBC_CC CC="${__GLIBC_CC} ${!VAR}" - einfo " $(printf '%15s' 'Manual CC:') ${CC}" -} - -foreach_abi() { - setup_env - - local ret=0 - local abilist="" - if use multilib ; then - abilist=$(get_install_abis) - else - abilist=${DEFAULT_ABI} - fi - local -x ABI - for ABI in ${abilist:-default} ; do - setup_env - einfo "Running $1 for ABI ${ABI}" - $1 - : $(( ret |= $? )) - done - return ${ret} -} - -glibc_banner() { - local b="Gentoo ${PVR}" - [[ -n ${PATCH_VER} ]] && ! use vanilla && b+=" p${PATCH_VER}" - echo "${b}" -} - -check_devpts() { - # Make sure devpts is mounted correctly for use w/out setuid pt_chown. - - # If merely building the binary package, then there's nothing to verify. - [[ ${MERGE_TYPE} == "buildonly" ]] && return - - # Only sanity check when installing the native glibc. - [[ ${ROOT} != "/" ]] && return - - # If they're opting in to the old suid code, then no need to check. - use suid && return - - if awk '$3 == "devpts" && $4 ~ /[, ]gid=5[, ]/ { exit 1 }' /proc/mounts ; then - eerror "In order to use glibc with USE=-suid, you must make sure that" - eerror "you have devpts mounted at /dev/pts with the gid=5 option." - eerror "Openrc should do this for you, so you should check /etc/fstab" - eerror "and make sure you do not have any invalid settings there." - die "mount & fix your /dev/pts settings" - fi -} - -# The following Kernel version handling functions are mostly copied from portage -# source. It's better not to use linux-info.eclass here since a) it adds too -# much magic, see bug 326693 for some of the arguments, and b) some of the -# functions are just not provided. - -g_get_running_KV() { - uname -r - return $? -} - -g_KV_major() { - [[ -z $1 ]] && return 1 - local KV=$@ - echo "${KV%%.*}" -} - -g_KV_minor() { - [[ -z $1 ]] && return 1 - local KV=$@ - KV=${KV#*.} - echo "${KV%%.*}" -} - -g_KV_micro() { - [[ -z $1 ]] && return 1 - local KV=$@ - KV=${KV#*.*.} - echo "${KV%%[^[:digit:]]*}" -} - -g_KV_to_int() { - [[ -z $1 ]] && return 1 - local KV_MAJOR=$(g_KV_major "$1") - local KV_MINOR=$(g_KV_minor "$1") - local KV_MICRO=$(g_KV_micro "$1") - local KV_int=$(( KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO )) - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [[ ${KV_int} -ge 131584 ]] ; then - echo "${KV_int}" - return 0 - fi - return 1 -} - -g_int_to_KV() { - local version=$1 major minor micro - major=$((version / 65536)) - minor=$(((version % 65536) / 256)) - micro=$((version % 256)) - echo ${major}.${minor}.${micro} -} - -eend_KV() { - [[ $(g_KV_to_int $1) -ge $(g_KV_to_int $2) ]] - eend $? -} - -get_kheader_version() { - printf '#include \nLINUX_VERSION_CODE\n' | \ - $(tc-getCPP ${CTARGET}) -I "${EPREFIX}/$(alt_build_headers)" - | \ - tail -n 1 -} - -# We collect all sanity checks here. Consistency is not guranteed between -# pkg_ and src_ phases, so we call this function both in pkg_pretend and in -# src_unpack. -sanity_prechecks() { - # Make sure devpts is mounted correctly for use w/out setuid pt_chown - check_devpts - - # Prevent native builds from downgrading - if [[ ${MERGE_TYPE} != "buildonly" ]] && \ - [[ ${ROOT} == "/" ]] && \ - [[ ${CBUILD} == ${CHOST} ]] && \ - [[ ${CHOST} == ${CTARGET} ]] ; then - - # The high rev # is to allow people to downgrade between -r# - # versions. We want to block 2.20->2.19, but 2.20-r3->2.20-r2 - # should be fine. Hopefully we never actually use a r# this - # high. - if has_version ">${CATEGORY}/${P}-r10000" ; then - eerror "Sanity check to keep you from breaking your system:" - eerror " Downgrading glibc is not supported and a sure way to destruction." - die "Aborting to save your system." - fi - - if ! do_run_test '#include \n#include \nint main(){return syscall(1000)!=-1;}\n' ; then - eerror "Your old kernel is broken. You need to update it to a newer" - eerror "version as syscall() will break. See bug 279260." - die "Old and broken kernel." - fi - fi - - # Users have had a chance to phase themselves, time to give em the boot - if [[ -e ${EROOT}/etc/locale.gen ]] && [[ -e ${EROOT}/etc/locales.build ]] ; then - eerror "You still haven't deleted ${EROOT}/etc/locales.build." - eerror "Do so now after making sure ${EROOT}/etc/locale.gen is kosher." - die "Lazy upgrader detected" - fi - - if [[ ${CTARGET} == i386-* ]] ; then - eerror "i386 CHOSTs are no longer supported." - eerror "Chances are you don't actually want/need i386." - eerror "Please read https://www.gentoo.org/doc/en/change-chost.xml" - die "Please fix your CHOST" - fi - - if [[ -e /proc/xen ]] && [[ $(tc-arch) == "x86" ]] && ! is-flag -mno-tls-direct-seg-refs ; then - ewarn "You are using Xen but don't have -mno-tls-direct-seg-refs in your CFLAGS." - ewarn "This will result in a 50% performance penalty when running with a 32bit" - ewarn "hypervisor, which is probably not what you want." - fi - - use hardened && ! tc-enables-pie && \ - ewarn "PIE hardening not applied, as your compiler doesn't default to PIE" - - # Check for sanity of /etc/nsswitch.conf - if [[ -e ${EROOT}/etc/nsswitch.conf ]] ; then - local entry - for entry in passwd group shadow; do - if ! egrep -q "^[ \t]*${entry}:.*files" "${EROOT}"/etc/nsswitch.conf; then - eerror "Your ${EROOT}/etc/nsswitch.conf is out of date." - eerror "Please make sure you have 'files' entries for" - eerror "'passwd:', 'group:' and 'shadow:' databases." - eerror "For more details see:" - eerror " https://wiki.gentoo.org/wiki/Project:Toolchain/nsswitch.conf_in_glibc-2.26" - die "nsswitch.conf has no 'files' provider in '${entry}'." - fi - done - fi - - # ABI-specific checks follow here. Hey, we have a lot more specific conditions that - # we test for... - if ! is_crosscompile ; then - if use amd64 && use multilib && [[ ${MERGE_TYPE} != "binary" ]] ; then - ebegin "Checking that IA32 emulation is enabled in the running kernel" - echo 'int main(){return 0;}' > "${T}/check-ia32-emulation.c" - local STAT - if "${CC-${CHOST}-gcc}" ${CFLAGS_x86} "${T}/check-ia32-emulation.c" -o "${T}/check-ia32-emulation.elf32"; then - "${T}/check-ia32-emulation.elf32" - STAT=$? - else - # Don't fail here to allow single->multi ABI switch - # or recover from breakage like bug #646424 - ewarn "Failed to compile the ABI test. Broken host glibc?" - STAT=0 - fi - rm -f "${T}/check-ia32-emulation.elf32" - eend $STAT - [[ $STAT -eq 0 ]] || die "CONFIG_IA32_EMULATION must be enabled in the kernel to compile a multilib glibc." - fi - - fi - - # When we actually have to compile something... - if ! just_headers ; then - local run_kv build_kv want_kv - - run_kv=$(g_get_running_KV) - build_kv=$(g_int_to_KV $(get_kheader_version)) - want_kv=${MIN_KERN_VER} - - ebegin "Checking gcc for __thread support" - if ! eend $(want__thread ; echo $?) ; then - echo - eerror "Could not find a gcc that supports the __thread directive!" - eerror "Please update your binutils/gcc and try again." - die "No __thread support in gcc!" - fi - - if ! is_crosscompile && ! tc-is-cross-compiler ; then - # Building fails on an non-supporting kernel - ebegin "Checking running kernel version (${run_kv} >= ${want_kv})" - if ! eend_KV ${run_kv} ${want_kv} ; then - echo - eerror "You need a kernel of at least ${want_kv}!" - die "Kernel version too low!" - fi - fi - - ebegin "Checking linux-headers version (${build_kv} >= ${want_kv})" - if ! eend_KV ${build_kv} ${want_kv} ; then - echo - eerror "You need linux-headers of at least ${want_kv}!" - die "linux-headers version too low!" - fi - fi -} - -# -# the phases -# - -# pkg_pretend - -pkg_pretend() { - # All the checks... - einfo "Checking general environment sanity." - sanity_prechecks -} - -# src_unpack - -src_unpack() { - # Consistency is not guaranteed between pkg_ and src_ ... - sanity_prechecks - - use multilib && unpack gcc-multilib-bootstrap-${GCC_BOOTSTRAP_VER}.tar.xz - - setup_env - - if [[ -n ${EGIT_REPO_URI} ]] ; then - git-r3_src_unpack - else - unpack ${P}.tar.xz - fi - - cd "${S}" || die - touch locale/C-translit.h || die #185476 #218003 - - cd "${WORKDIR}" || die - unpack glibc-${RELEASE_VER}-patches-${PATCH_VER}.tar.bz2 -} - -src_prepare() { - if ! use vanilla ; then - elog "Applying Gentoo Glibc Patchset ${RELEASE_VER}-${PATCH_VER}" - eapply "${WORKDIR}"/patches - einfo "Done." - fi - - default - - gnuconfig_update - - cd "${WORKDIR}" - find . -name configure -exec touch {} + - - eprefixify extra/locale/locale-gen - - # Fix permissions on some of the scripts. - chmod u+x "${S}"/scripts/*.sh - - cd "${S}" -} - -glibc_do_configure() { - # Glibc does not work with gold (for various reasons) #269274. - tc-ld-disable-gold - - # CXX isnt handled by the multilib system, so if we dont unset here - # we accumulate crap across abis - unset CXX - - einfo "Configuring glibc for nptl" - - if use doc ; then - export MAKEINFO=makeinfo - else - export MAKEINFO=/dev/null - fi - - local v - for v in ABI CBUILD CHOST CTARGET CBUILD_OPT CTARGET_OPT CC CXX LD {AS,C,CPP,CXX,LD}FLAGS MAKEINFO ; do - einfo " $(printf '%15s' ${v}:) ${!v}" - done - - # The glibc configure script doesn't properly use LDFLAGS all the time. - export CC="$(tc-getCC ${CTARGET}) ${LDFLAGS}" - einfo " $(printf '%15s' 'Manual CC:') ${CC}" - - # Some of the tests are written in C++, so we need to force our multlib abis in, bug 623548 - export CXX="$(tc-getCXX ${CTARGET}) $(get_abi_CFLAGS)" - einfo " $(printf '%15s' 'Manual CXX:') ${CXX}" - # CFLAGS can contain ABI-specific flags like -mfpu=neon, see bug #657760 - # To build .S (assembly) files with the same ABI-specific flags - # upstream currently recommends adding CFLAGS to CPPFLAGS: https://sourceware.org/PR23273 - export CPPFLAGS="${CPPFLAGS} ${CFLAGS}" - einfo " $(printf '%15s' 'Manual CPPFLAGS:') ${CPPFLAGS}" - - echo - - local myconf=() - - case ${CTARGET} in - powerpc-*) - # Currently gcc on powerpc32 generates invalid code for - # __builtin_return_address(0) calls. Normally programs - # don't do that but malloc hooks in glibc do: - # https://gcc.gnu.org/PR81996 - # https://bugs.gentoo.org/629054 - myconf+=( --enable-stack-protector=no ) - ;; - *) - myconf+=( --enable-stack-protector=all ) - ;; - esac - myconf+=( --enable-stackguard-randomization ) - - # Keep a whitelist of targets supporing IFUNC. glibc's ./configure - # is not robust enough to detect proper support: - # https://bugs.gentoo.org/641216 - # https://sourceware.org/PR22634#c0 - case $(tc-arch ${CTARGET}) in - # Keep whitelist of targets where autodetection mostly works. - amd64|x86|sparc|ppc|ppc64|arm|arm64|s390) ;; - # Blacklist everywhere else - *) myconf+=( libc_cv_ld_gnu_indirect_function=no ) ;; - esac - - [[ $(tc-is-softfloat) == "yes" ]] && myconf+=( --without-fp ) - - myconf+=( --enable-kernel=${MIN_KERN_VER} ) - - # Since SELinux support is only required for nscd, only enable it if: - # 1. USE selinux - # 2. only for the primary ABI on multilib systems - # 3. Not a crosscompile - if ! is_crosscompile && use selinux ; then - if use multilib ; then - if is_final_abi ; then - myconf+=( --with-selinux ) - else - myconf+=( --without-selinux ) - fi - else - myconf+=( --with-selinux ) - fi - else - myconf+=( --without-selinux ) - fi - - # Force a few tests where we always know the answer but - # configure is incapable of finding it. - if is_crosscompile ; then - export \ - libc_cv_c_cleanup=yes \ - libc_cv_forced_unwind=yes - fi - - myconf+=( - --without-cvs - --disable-werror - --enable-bind-now - --build=${CBUILD_OPT:-${CBUILD}} - --host=${CTARGET_OPT:-${CTARGET}} - $(use_enable profile) - $(use_with gd) - --with-headers=$(alt_build_headers) - --prefix="${EPREFIX}/usr" - --sysconfdir="${EPREFIX}/etc" - --localstatedir="${EPREFIX}/var" - --libdir='$(prefix)'/$(get_libdir) - --mandir='$(prefix)'/share/man - --infodir='$(prefix)'/share/info - --libexecdir='$(libdir)'/misc/glibc - --with-bugurl=https://bugs.gentoo.org/ - --with-pkgversion="$(glibc_banner)" - $(use_multiarch || echo --disable-multi-arch) - $(use_enable systemtap) - $(use_enable nscd) - ${EXTRA_ECONF} - ) - - # We rely on sys-libs/timezone-data for timezone tools normally. - myconf+=( $(use_enable vanilla timezone-tools) ) - - # These libs don't have configure flags. - ac_cv_lib_audit_audit_log_user_avc_message=$(usex audit || echo no) - ac_cv_lib_cap_cap_init=$(usex caps || echo no) - - # There is no configure option for this and we need to export it - # since the glibc build will re-run configure on itself - export libc_cv_rootsbindir="${EPREFIX}/sbin" - export libc_cv_slibdir="${EPREFIX}/$(get_libdir)" - - # We take care of patching our binutils to use both hash styles, - # and many people like to force gnu hash style only, so disable - # this overriding check. #347761 - export libc_cv_hashstyle=no - - local builddir=$(builddir nptl) - mkdir -p "${builddir}" - cd "${builddir}" - set -- "${S}"/configure "${myconf[@]}" - echo "$@" - "$@" || die "failed to configure glibc" - - # ia64 static cross-compilers are a pita in so much that they - # can't produce static ELFs (as the libgcc.a is broken). so - # disable building of the programs for those targets if it - # doesn't work. - # XXX: We could turn this into a compiler test, but ia64 is - # the only one that matters, so this should be fine for now. - if is_crosscompile && [[ ${CTARGET} == ia64* ]] ; then - sed -i '1i+link-static = touch $@' config.make - fi - - # If we're trying to migrate between ABI sets, we need - # to lie and use a local copy of gcc. Like if the system - # is built with MULTILIB_ABIS="amd64 x86" but we want to - # add x32 to it, gcc/glibc don't yet support x32. - # - if [[ -n ${GCC_BOOTSTRAP_VER} ]] && use multilib ; then - echo 'main(){}' > "${T}"/test.c - if ! $(tc-getCC ${CTARGET}) ${CFLAGS} ${LDFLAGS} "${T}"/test.c -Wl,-emain -lgcc 2>/dev/null ; then - sed -i -e '/^CC = /s:$: -B$(objdir)/../'"gcc-multilib-bootstrap-${GCC_BOOTSTRAP_VER}/${ABI}:" config.make || die - fi - fi -} - -glibc_headers_configure() { - export ABI=default - - local builddir=$(builddir "headers") - mkdir -p "${builddir}" - cd "${builddir}" - - # if we don't have a compiler yet, we can't really test it now ... - # hopefully they don't affect header generation, so let's hope for - # the best here ... - local v vars=( - ac_cv_header_cpuid_h=yes - libc_cv_{386,390,alpha,arm,hppa,ia64,mips,{powerpc,sparc}{,32,64},sh,x86_64}_tls=yes - libc_cv_asm_cfi_directives=yes - libc_cv_broken_visibility_attribute=no - libc_cv_c_cleanup=yes - libc_cv_compiler_powerpc64le_binary128_ok=yes - libc_cv_forced_unwind=yes - libc_cv_gcc___thread=yes - libc_cv_mlong_double_128=yes - libc_cv_mlong_double_128ibm=yes - libc_cv_ppc_machine=yes - libc_cv_ppc_rel16=yes - libc_cv_predef_fortify_source=no - libc_cv_target_power8_ok=yes - libc_cv_visibility_attribute=yes - libc_cv_z_combreloc=yes - libc_cv_z_execstack=yes - libc_cv_z_initfirst=yes - libc_cv_z_nodelete=yes - libc_cv_z_nodlopen=yes - libc_cv_z_relro=yes - libc_mips_abi=${ABI} - libc_mips_float=$([[ $(tc-is-softfloat) == "yes" ]] && echo soft || echo hard) - # These libs don't have configure flags. - ac_cv_lib_audit_audit_log_user_avc_message=no - ac_cv_lib_cap_cap_init=no - ) - - einfo "Forcing cached settings:" - for v in "${vars[@]}" ; do - einfo " ${v}" - export ${v} - done - - local headers_only_arch_CPPFLAGS=() - - # Blow away some random CC settings that screw things up. #550192 - if [[ -d ${S}/sysdeps/mips ]]; then - pushd "${S}"/sysdeps/mips >/dev/null - sed -i -e '/^CC +=/s:=.*:= -D_MIPS_SZPTR=32:' mips32/Makefile mips64/n32/Makefile || die - sed -i -e '/^CC +=/s:=.*:= -D_MIPS_SZPTR=64:' mips64/n64/Makefile || die - - # Force the mips ABI to the default. This is OK because the set of - # installed headers in this phase is the same between the 3 ABIs. - # If this ever changes, this hack will break, but that's unlikely - # as glibc discourages that behavior. - # https://crbug.com/647033 - sed -i -e 's:abiflag=.*:abiflag=_ABIO32:' preconfigure || die - - popd >/dev/null - fi - - case ${CTARGET} in - riscv*) - # RISC-V interrogates the compiler to determine which target to - # build. If building the headers then we don't strictly need a - # RISC-V compiler, so the built-in definitions that are provided - # along with all RISC-V compiler might not exist. This causes - # glibc's RISC-V preconfigure script to blow up. Since we're just - # building the headers any value will actually work here, so just - # pick the standard one (rv64g/lp64d) to make the build scripts - # happy for now -- the headers are all the same anyway so it - # doesn't matter. - headers_only_arch_CPPFLAGS+=( - -D__riscv_xlen=64 - -D__riscv_flen=64 - -D__riscv_float_abi_double=1 - -D__riscv_atomic=1 - ) ;; - esac - - local myconf=() - myconf+=( - --disable-sanity-checks - --enable-hacker-mode - --without-cvs - --disable-werror - --enable-bind-now - --build=${CBUILD_OPT:-${CBUILD}} - --host=${CTARGET_OPT:-${CTARGET}} - --with-headers=$(alt_build_headers) - --prefix="${EPREFIX}/usr" - ${EXTRA_ECONF} - ) - - # Nothing is compiled here which would affect the headers for the target. - # So forcing CC/CFLAGS is sane. - local headers_only_CC=$(tc-getBUILD_CC) - local headers_only_CFLAGS="-O1 -pipe" - local headers_only_CPPFLAGS="-U_FORTIFY_SOURCE ${headers_only_arch_CPPFLAGS[*]}" - local headers_only_LDFLAGS="" - set -- "${S}"/configure "${myconf[@]}" - echo \ - "CC=${headers_only_CC}" \ - "CFLAGS=${headers_only_CFLAGS}" \ - "CPPFLAGS=${headers_only_CPPFLAGS}" \ - "LDFLAGS=${headers_only_LDFLAGS}" \ - "$@" - CC=${headers_only_CC} \ - CFLAGS=${headers_only_CFLAGS} \ - CPPFLAGS=${headers_only_CPPFLAGS} \ - LDFLAGS="" \ - "$@" || die "failed to configure glibc" -} - -do_src_configure() { - if just_headers ; then - glibc_headers_configure - else - glibc_do_configure nptl - fi -} - -src_configure() { - foreach_abi do_src_configure -} - -do_src_compile() { - emake -C "$(builddir nptl)" || die "make nptl for ${ABI} failed" -} - -src_compile() { - if just_headers ; then - return - fi - - foreach_abi do_src_compile -} - -glibc_src_test() { - cd "$(builddir nptl)" - emake check -} - -do_src_test() { - local ret=0 - - glibc_src_test - : $(( ret |= $? )) - - return ${ret} -} - -src_test() { - if just_headers ; then - return - fi - - # Give tests more time to complete. - export TIMEOUTFACTOR=5 - - foreach_abi do_src_test || die "tests failed" -} - -run_locale_gen() { - # if the host locales.gen contains no entries, we'll install everything - local root="$1" - local locale_list="${root}/etc/locale.gen" - if [[ -z $(locale-gen --list --config "${locale_list}") ]] ; then - ewarn "Generating all locales; edit /etc/locale.gen to save time/space" - locale_list="${root}/usr/share/i18n/SUPPORTED" - fi - - locale-gen --jobs $(makeopts_jobs) --config "${locale_list}" \ - --destdir "${root}" -} - -glibc_do_src_install() { - local builddir=$(builddir nptl) - cd "${builddir}" - - emake install_root="${D}$(alt_prefix)" install || die - - # This version (2.26) provides some compatibility libraries for the NIS/NIS+ support - # which come without headers etc. Only needed for binary packages since the - # external net-libs/libnsl has increased soversion. Keep only versioned libraries. - find "${D}" -name "libnsl.a" -delete - find "${D}" -name "libnsl.so" -delete - - # Normally upstream_pv is ${PV}. Live ebuilds are exception, there we need - # to infer upstream version: - # '#define VERSION "2.26.90"' -> '2.26.90' - local upstream_pv=$(sed -n -r 's/#define VERSION "(.*)"/\1/p' "${S}"/version.h) - - if [[ -e ${ED}$(alt_usrlibdir)/libm-${upstream_pv}.a ]] ; then - # Move versioned .a file out of libdir to evade portage QA checks - # instead of using gen_usr_ldscript(). We fix ldscript as: - # "GROUP ( /usr/lib64/libm-.a ..." -> "GROUP ( /usr/lib64/glibc-/libm-.a ..." - sed -i "s@\(libm-${upstream_pv}.a\)@${P}/\1@" "${ED}"$(alt_usrlibdir)/libm.a || die - dodir $(alt_usrlibdir)/${P} - mv "${ED}"$(alt_usrlibdir)/libm-${upstream_pv}.a "${ED}"$(alt_usrlibdir)/${P}/libm-${upstream_pv}.a || die - fi - - # We'll take care of the cache ourselves - rm -f "${ED}"/etc/ld.so.cache - - # Everything past this point just needs to be done once ... - is_final_abi || return 0 - - # Make sure the non-native interp can be found on multilib systems even - # if the main library set isn't installed into the right place. Maybe - # we should query the active gcc for info instead of hardcoding it ? - local i ldso_abi ldso_name - local ldso_abi_list=( - # x86 - amd64 /lib64/ld-linux-x86-64.so.2 - x32 /libx32/ld-linux-x32.so.2 - x86 /lib/ld-linux.so.2 - # mips - o32 /lib/ld.so.1 - n32 /lib32/ld.so.1 - n64 /lib64/ld.so.1 - # powerpc - ppc /lib/ld.so.1 - ppc64 /lib64/ld64.so.1 - # s390 - s390 /lib/ld.so.1 - s390x /lib/ld64.so.1 - # sparc - sparc32 /lib/ld-linux.so.2 - sparc64 /lib64/ld-linux.so.2 - ) - case $(tc-endian) in - little) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64.so.1 - ) - ;; - big) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64_be.so.1 - ) - ;; - esac - if [[ ${SYMLINK_LIB} == "yes" ]] && [[ ! -e ${ED}/$(alt_prefix)/lib ]] ; then - dosym $(get_abi_LIBDIR ${DEFAULT_ABI}) $(alt_prefix)/lib - fi - for (( i = 0; i < ${#ldso_abi_list[@]}; i += 2 )) ; do - ldso_abi=${ldso_abi_list[i]} - has ${ldso_abi} $(get_install_abis) || continue - - ldso_name="$(alt_prefix)${ldso_abi_list[i+1]}" - if [[ ! -L ${ED}/${ldso_name} && ! -e ${ED}/${ldso_name} ]] ; then - dosym ../$(get_abi_LIBDIR ${ldso_abi})/${ldso_name##*/} ${ldso_name} - fi - done - - # With devpts under Linux mounted properly, we do not need the pt_chown - # binary to be setuid. This is because the default owners/perms will be - # exactly what we want. - if ! use suid ; then - find "${ED}" -name pt_chown -exec chmod -s {} + - fi - - ################################################################# - # EVERYTHING AFTER THIS POINT IS FOR NATIVE GLIBC INSTALLS ONLY # - # Make sure we install some symlink hacks so that when we build - # a 2nd stage cross-compiler, gcc finds the target system - # headers correctly. See gcc/doc/gccinstall.info - if is_crosscompile ; then - # We need to make sure that /lib and /usr/lib always exists. - # gcc likes to use relative paths to get to its multilibs like - # /usr/lib/../lib64/. So while we don't install any files into - # /usr/lib/, we do need it to exist. - cd "${ED}"$(alt_libdir)/.. - [[ -e lib ]] || mkdir lib - cd "${ED}"$(alt_usrlibdir)/.. - [[ -e lib ]] || mkdir lib - - dosym usr/include $(alt_prefix)/sys-include - return 0 - fi - - # Files for Debian-style locale updating - dodir /usr/share/i18n - sed \ - -e "/^#/d" \ - -e "/SUPPORTED-LOCALES=/d" \ - -e "s: \\\\::g" -e "s:/: :g" \ - "${S}"/localedata/SUPPORTED > "${ED}"/usr/share/i18n/SUPPORTED \ - || die "generating /usr/share/i18n/SUPPORTED failed" - cd "${WORKDIR}"/extra/locale - dosbin locale-gen - doman *.[0-8] - insinto /etc - doins locale.gen - - # Make sure all the ABI's can find the locales and so we only - # have to generate one set - local a - keepdir /usr/$(get_libdir)/locale - for a in $(get_install_abis) ; do - if [[ ! -e ${ED}/usr/$(get_abi_LIBDIR ${a})/locale ]] ; then - dosym ../$(get_libdir)/locale /usr/$(get_abi_LIBDIR ${a})/locale - fi - done - - cd "${S}" - - # Install misc network config files - insinto /etc - doins nscd/nscd.conf posix/gai.conf nss/nsswitch.conf - doins "${WORKDIR}"/extra/etc/*.conf - - if use nscd ; then - doinitd "$(prefixify_ro "${WORKDIR}"/extra/etc/nscd)" - - local nscd_args=( - -e "s:@PIDFILE@:$(strings "${ED}"/usr/sbin/nscd | grep nscd.pid):" - ) - - sed -i "${nscd_args[@]}" "${ED}"/etc/init.d/nscd - - systemd_dounit nscd/nscd.service - systemd_newtmpfilesd nscd/nscd.tmpfiles nscd.conf - else - # Do this since extra/etc/*.conf above might have nscd.conf. - rm -f "${ED}"/etc/nscd.conf - fi - - echo 'LDPATH="include ld.so.conf.d/*.conf"' > "${T}"/00glibc - doenvd "${T}"/00glibc - - for d in BUGS ChangeLog CONFORMANCE FAQ NEWS NOTES PROJECTS README* ; do - [[ -s ${d} ]] && dodoc ${d} - done - dodoc -r ChangeLog.old - - # Prevent overwriting of the /etc/localtime symlink. We'll handle the - # creation of the "factory" symlink in pkg_postinst(). - rm -f "${ED}"/etc/localtime - - # Generate all locales if this is a native build as locale generation - if use compile-locales && ! is_crosscompile ; then - run_locale_gen "${ED}" - fi -} - -glibc_headers_install() { - local builddir=$(builddir "headers") - cd "${builddir}" - emake install_root="${D}$(alt_prefix)" install-headers - - insinto $(alt_headers)/gnu - doins "${S}"/include/gnu/stubs.h - - # Make sure we install the sys-include symlink so that when - # we build a 2nd stage cross-compiler, gcc finds the target - # system headers correctly. See gcc/doc/gccinstall.info - dosym usr/include $(alt_prefix)/sys-include -} - -src_strip() { - # gdb is lame and requires some debugging information to remain in - # libpthread, so we need to strip it by hand. libthread_db makes no - # sense stripped as it is only used when debugging. - local pthread=$(has splitdebug ${FEATURES} && echo "libthread_db" || echo "lib{pthread,thread_db}") - env \ - -uRESTRICT \ - CHOST=${CTARGET} \ - STRIP_MASK="/*/{,tls/}${pthread}*" \ - prepallstrip - # if user has stripping enabled and does not have split debug turned on, - # then leave the debugging sections in libpthread. - if ! has nostrip ${FEATURES} && ! has splitdebug ${FEATURES} ; then - ${STRIP:-${CTARGET}-strip} --strip-debug "${ED}"$(alt_prefix)/*/libpthread-*.so - fi -} - -src_install() { - if just_headers ; then - export ABI=default - glibc_headers_install - return - fi - - foreach_abi glibc_do_src_install - src_strip -} - -# Simple test to make sure our new glibc isn't completely broken. -# Make sure we don't test with statically built binaries since -# they will fail. Also, skip if this glibc is a cross compiler. -# -# If coreutils is built with USE=multicall, some of these files -# will just be wrapper scripts, not actual ELFs we can test. -glibc_sanity_check() { - cd / #228809 - - # We enter ${ED} so to avoid trouble if the path contains - # special characters; for instance if the path contains the - # colon character (:), then the linker will try to split it - # and look for the libraries in an unexpected place. This can - # lead to unsafe code execution if the generated prefix is - # within a world-writable directory. - # (e.g. /var/tmp/portage:${HOSTNAME}) - pushd "${ED}"/$(get_libdir) >/dev/null - - local x striptest - for x in cal date env free ls true uname uptime ; do - x=$(type -p ${x}) - [[ -z ${x} || ${x} != ${EPREFIX}/* ]] && continue - striptest=$(LC_ALL="C" file -L ${x} 2>/dev/null) || continue - case ${striptest} in - *"statically linked"*) continue;; - *"ASCII text"*) continue;; - esac - # We need to clear the locale settings as the upgrade might want - # incompatible locale data. This test is not for verifying that. - LC_ALL=C \ - ./ld-*.so --library-path . ${x} > /dev/null \ - || die "simple run test (${x}) failed" - done - - popd >/dev/null -} - -pkg_preinst() { - # nothing to do if just installing headers - just_headers && return - - # prepare /etc/ld.so.conf.d/ for files - mkdir -p "${EROOT}"/etc/ld.so.conf.d - - # Default /etc/hosts.conf:multi to on for systems with small dbs. - if [[ $(wc -l < "${EROOT}"/etc/hosts) -lt 1000 ]] ; then - sed -i '/^multi off/s:off:on:' "${ED}"/etc/host.conf - einfo "Defaulting /etc/host.conf:multi to on" - fi - - [[ ${ROOT} != "/" ]] && return 0 - [[ -d ${ED}/$(get_libdir) ]] || return 0 - [[ -z ${BOOTSTRAP_RAP} ]] && glibc_sanity_check -} - -pkg_postinst() { - # nothing to do if just installing headers - just_headers && return - - if ! tc-is-cross-compiler && [[ -x ${EROOT}/usr/sbin/iconvconfig ]] ; then - # Generate fastloading iconv module configuration file. - "${EROOT}"/usr/sbin/iconvconfig --prefix="${ROOT}" - fi - - if ! is_crosscompile && [[ ${ROOT} == "/" ]] ; then - # Reload init ... if in a chroot or a diff init package, ignore - # errors from this step #253697 - /sbin/telinit U 2>/dev/null - - use compile-locales || run_locale_gen "${EROOT}" - fi - - # Check for sanity of /etc/nsswitch.conf, take 2 - if [[ -e ${EROOT}/etc/nsswitch.conf ]] && ! has_version sys-auth/libnss-nis ; then - local entry - for entry in passwd group shadow; do - if egrep -q "^[ \t]*${entry}:.*nis" "${EROOT}"/etc/nsswitch.conf; then - ewarn "" - ewarn "Your ${EROOT}/etc/nsswitch.conf uses NIS. Support for that has been" - ewarn "removed from glibc and is now provided by the package" - ewarn " sys-auth/libnss-nis" - ewarn "Install it now to keep your NIS setup working." - ewarn "" - fi - done - fi -} diff --git a/sys-libs/glibc/glibc-2.27-r5.ebuild b/sys-libs/glibc/glibc-2.27-r5.ebuild deleted file mode 100644 index a42e486dd6b7..000000000000 --- a/sys-libs/glibc/glibc-2.27-r5.ebuild +++ /dev/null @@ -1,1418 +0,0 @@ -# Copyright 1999-2018 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -inherit prefix eutils versionator toolchain-funcs flag-o-matic gnuconfig \ - multilib systemd multiprocessing - -DESCRIPTION="GNU libc C library" -HOMEPAGE="https://www.gnu.org/software/libc/" -LICENSE="LGPL-2.1+ BSD HPND ISC inner-net rc PCRE" -RESTRICT="strip" # Strip ourself #46186 -SLOT="2.2" - -EMULTILIB_PKG="true" - -if [[ ${PV} == 9999* ]]; then - EGIT_REPO_URI="https://sourceware.org/git/glibc.git" - inherit git-r3 -else - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86" - SRC_URI="mirror://gnu/glibc/${P}.tar.xz" -fi - -RELEASE_VER=${PV} - -GCC_BOOTSTRAP_VER=20180511 - -# Gentoo patchset -PATCH_VER=2 - -SRC_URI+=" https://dev.gentoo.org/~dilfridge/distfiles/${P}-patches-${PATCH_VER}.tar.bz2" -SRC_URI+=" multilib? ( https://dev.gentoo.org/~dilfridge/distfiles/gcc-multilib-bootstrap-${GCC_BOOTSTRAP_VER}.tar.xz )" - -IUSE="audit caps compile-locales doc gd hardened headers-only +multiarch multilib nscd profile selinux suid systemtap vanilla" - -# Minimum kernel version that glibc requires -MIN_KERN_VER="3.2.0" - -# Here's how the cross-compile logic breaks down ... -# CTARGET - machine that will target the binaries -# CHOST - machine that will host the binaries -# CBUILD - machine that will build the binaries -# If CTARGET != CHOST, it means you want a libc for cross-compiling. -# If CHOST != CBUILD, it means you want to cross-compile the libc. -# CBUILD = CHOST = CTARGET - native build/install -# CBUILD != (CHOST = CTARGET) - cross-compile a native build -# (CBUILD = CHOST) != CTARGET - libc for cross-compiler -# CBUILD != CHOST != CTARGET - cross-compile a libc for a cross-compiler -# For install paths: -# CHOST = CTARGET - install into / -# CHOST != CTARGET - install into /usr/CTARGET/ -# -export CBUILD=${CBUILD:-${CHOST}} -export CTARGET=${CTARGET:-${CHOST}} -if [[ ${CTARGET} == ${CHOST} ]] ; then - if [[ ${CATEGORY} == cross-* ]] ; then - export CTARGET=${CATEGORY#cross-} - fi -fi - -# We need a new-enough binutils/gcc to match upstream baseline. -# Also we need to make sure our binutils/gcc supports TLS. -COMMON_DEPEND=" - nscd? ( selinux? ( - audit? ( sys-process/audit ) - caps? ( sys-libs/libcap ) - ) ) - suid? ( caps? ( sys-libs/libcap ) ) - selinux? ( sys-libs/libselinux ) - systemtap? ( dev-util/systemtap ) -" -DEPEND="${COMMON_DEPEND} - >=app-misc/pax-utils-0.1.10 - sys-devel/bison - !' | $(tc-getCPP ${CTARGET}) ${CFLAGS} 2>&1 | grep -o '[^"]*linux/version.h') - ALT_BUILD_HEADERS=${header_path%/linux/version.h} - fi - fi - fi - echo "${ALT_BUILD_HEADERS}" -} - -alt_libdir() { - echo $(alt_prefix)/$(get_libdir) -} -alt_usrlibdir() { - echo $(alt_prefix)/usr/$(get_libdir) -} - -builddir() { - echo "${WORKDIR}/build-${ABI}-${CTARGET}-$1" -} - -do_compile_test() { - local ret save_cflags=${CFLAGS} - CFLAGS+=" $1" - shift - - pushd "${T}" >/dev/null - - rm -f glibc-test* - printf '%b' "$*" > glibc-test.c - - nonfatal emake -s glibc-test - ret=$? - - popd >/dev/null - - CFLAGS=${save_cflags} - return ${ret} -} - -do_run_test() { - local ret - - if [[ ${MERGE_TYPE} == "binary" ]] ; then - # ignore build failures when installing a binary package #324685 - do_compile_test "" "$@" 2>/dev/null || return 0 - else - if ! do_compile_test "" "$@" ; then - ewarn "Simple build failed ... assuming this is desired #324685" - return 0 - fi - fi - - pushd "${T}" >/dev/null - - ./glibc-test - ret=$? - rm -f glibc-test* - - popd >/dev/null - - return ${ret} -} - -setup_target_flags() { - # This largely mucks with compiler flags. None of which should matter - # when building up just the headers. - just_headers && return 0 - - case $(tc-arch) in - x86) - # -march needed for #185404 #199334 - # TODO: When creating the first glibc cross-compile, this test will - # always fail as it does a full link which in turn requires glibc. - # Probably also applies when changing multilib profile settings (e.g. - # enabling x86 when the profile was amd64-only previously). - # We could change main to _start and pass -nostdlib here so that we - # only test the gcc code compilation. Or we could do a compile and - # then look for the symbol via scanelf. - if ! do_compile_test "" 'void f(int i, void *p) {if (__sync_fetch_and_add(&i, 1)) f(i, p);}\nint main(){return 0;}\n' 2>/dev/null ; then - local t=${CTARGET_OPT:-${CTARGET}} - t=${t%%-*} - filter-flags '-march=*' - export CFLAGS="-march=${t} ${CFLAGS}" - einfo "Auto adding -march=${t} to CFLAGS #185404" - fi - ;; - amd64) - # -march needed for #185404 #199334 - # Note: This test only matters when the x86 ABI is enabled, so we could - # optimize a bit and elide it. - # TODO: See cross-compile issues listed above for x86. - if ! do_compile_test "${CFLAGS_x86}" 'void f(int i, void *p) {if (__sync_fetch_and_add(&i, 1)) f(i, p);}\nint main(){return 0;}\n' 2>/dev/null ; then - local t=${CTARGET_OPT:-${CTARGET}} - t=${t%%-*} - # Normally the target is x86_64-xxx, so turn that into the -march that - # gcc actually accepts. #528708 - [[ ${t} == "x86_64" ]] && t="x86-64" - filter-flags '-march=*' - # ugly, ugly, ugly. ugly. - CFLAGS_x86=$(CFLAGS=${CFLAGS_x86} filter-flags '-march=*'; echo "${CFLAGS}") - export CFLAGS_x86="${CFLAGS_x86} -march=${t}" - einfo "Auto adding -march=${t} to CFLAGS_x86 #185404" - fi - ;; - mips) - # The mips abi cannot support the GNU style hashes. #233233 - filter-ldflags -Wl,--hash-style=gnu -Wl,--hash-style=both - ;; - sparc) - # Both sparc and sparc64 can use -fcall-used-g6. -g7 is bad, though. - filter-flags "-fcall-used-g7" - append-flags "-fcall-used-g6" - - # If the CHOST is the basic one (e.g. not sparcv9-xxx already), - # try to pick a better one so glibc can use cpu-specific .S files. - # We key off the CFLAGS to get a good value. Also need to handle - # version skew. - # We can't force users to set their CHOST to their exact machine - # as many of these are not recognized by config.sub/gcc and such :(. - # Note: If the mcpu values don't scale, we might try probing CPP defines. - # Note: Should we factor in -Wa,-AvXXX flags too ? Or -mvis/etc... ? - - local cpu - case ${CTARGET} in - sparc64-*) - case $(get-flag mcpu) in - niagara[234]) - if version_is_at_least 2.8 ; then - cpu="sparc64v2" - elif version_is_at_least 2.4 ; then - cpu="sparc64v" - elif version_is_at_least 2.2.3 ; then - cpu="sparc64b" - fi - ;; - niagara) - if version_is_at_least 2.4 ; then - cpu="sparc64v" - elif version_is_at_least 2.2.3 ; then - cpu="sparc64b" - fi - ;; - ultrasparc3) - cpu="sparc64b" - ;; - *) - # We need to force at least v9a because the base build doesn't - # work with just v9. - # https://sourceware.org/bugzilla/show_bug.cgi?id=19477 - [[ -z ${cpu} ]] && append-flags "-Wa,-xarch=v9a" - ;; - esac - ;; - sparc-*) - case $(get-flag mcpu) in - niagara[234]) - if version_is_at_least 2.8 ; then - cpu="sparcv9v2" - elif version_is_at_least 2.4 ; then - cpu="sparcv9v" - elif version_is_at_least 2.2.3 ; then - cpu="sparcv9b" - else - cpu="sparcv9" - fi - ;; - niagara) - if version_is_at_least 2.4 ; then - cpu="sparcv9v" - elif version_is_at_least 2.2.3 ; then - cpu="sparcv9b" - else - cpu="sparcv9" - fi - ;; - ultrasparc3) - cpu="sparcv9b" - ;; - v9|ultrasparc) - cpu="sparcv9" - ;; - v8|supersparc|hypersparc|leon|leon3) - cpu="sparcv8" - ;; - esac - ;; - esac - [[ -n ${cpu} ]] && CTARGET_OPT="${cpu}-${CTARGET#*-}" - ;; - esac -} - -setup_flags() { - # Make sure host make.conf doesn't pollute us - if is_crosscompile || tc-is-cross-compiler ; then - CHOST=${CTARGET} strip-unsupported-flags - fi - - # Store our CFLAGS because it's changed depending on which CTARGET - # we are building when pulling glibc on a multilib profile - CFLAGS_BASE=${CFLAGS_BASE-${CFLAGS}} - CFLAGS=${CFLAGS_BASE} - CXXFLAGS_BASE=${CXXFLAGS_BASE-${CXXFLAGS}} - CXXFLAGS=${CXXFLAGS_BASE} - ASFLAGS_BASE=${ASFLAGS_BASE-${ASFLAGS}} - ASFLAGS=${ASFLAGS_BASE} - - # Over-zealous CFLAGS can often cause problems. What may work for one - # person may not work for another. To avoid a large influx of bugs - # relating to failed builds, we strip most CFLAGS out to ensure as few - # problems as possible. - strip-flags - strip-unsupported-flags - filter-flags -m32 -m64 '-mabi=*' - - # glibc aborts if rpath is set by LDFLAGS - filter-ldflags '-Wl,-rpath=*' - - # #492892 - filter-flags -frecord-gcc-switches - - unset CBUILD_OPT CTARGET_OPT - if use multilib ; then - CTARGET_OPT=$(get_abi_CTARGET) - [[ -z ${CTARGET_OPT} ]] && CTARGET_OPT=$(get_abi_CHOST) - fi - - setup_target_flags - - if [[ -n ${CTARGET_OPT} && ${CBUILD} == ${CHOST} ]] && ! is_crosscompile; then - CBUILD_OPT=${CTARGET_OPT} - fi - - # Lock glibc at -O2; we want to be conservative here. - # -fno-strict-aliasing is to work around #155906. - filter-flags '-O?' - append-flags -O2 -fno-strict-aliasing - - filter-flags '-fstack-protector*' - - # Starting with gcc-6 (and fully upstreamed pie patches) we control - # default enabled/disabled pie via use flags. So nothing to do - # here then. #618160 - if [[ $(gcc-major-version) -lt 6 ]]; then - if use hardened && tc-enables-pie ; then - # Force PIC macro definition for all compilations since they're all - # either -fPIC or -fPIE with the default-PIE compiler. - append-cppflags -DPIC - else - # Don't build -fPIE without the default-PIE compiler and the - # hardened-pie patch - filter-flags -fPIE - fi - fi -} - -want_tls() { - # Archs that can use TLS (Thread Local Storage) - case $(tc-arch) in - x86) - # requires i486 or better #106556 - [[ ${CTARGET} == i[4567]86* ]] && return 0 - return 1 - ;; - esac - return 0 -} - -want__thread() { - want_tls || return 1 - - # For some reason --with-tls --with__thread is causing segfaults on sparc32. - [[ ${PROFILE_ARCH} == "sparc" ]] && return 1 - - [[ -n ${WANT__THREAD} ]] && return ${WANT__THREAD} - - # only test gcc -- can't test linking yet - tc-has-tls -c ${CTARGET} - WANT__THREAD=$? - - return ${WANT__THREAD} -} - -use_multiarch() { - # Allow user to disable runtime arch detection in multilib. - use multiarch || return 1 - # Make sure binutils is new enough to support indirect functions, - # #336792. This funky sed supports gold and bfd linkers. - local bver nver - bver=$($(tc-getLD ${CTARGET}) -v | sed -n -r '1{s:[^0-9]*::;s:^([0-9.]*).*:\1:;p}') - case $(tc-arch ${CTARGET}) in - amd64|x86) nver="2.20" ;; - arm) nver="2.22" ;; - hppa) nver="2.23" ;; - ppc|ppc64) nver="2.20" ;; - # ifunc support was added in 2.23, but glibc also needs - # machinemode which is in 2.24. - s390) nver="2.24" ;; - sparc) nver="2.21" ;; - *) return 1 ;; - esac - version_is_at_least ${nver} ${bver} -} - -# Setup toolchain variables that had historically been defined in the -# profiles for these archs. -setup_env() { - # silly users - unset LD_RUN_PATH - unset LD_ASSUME_KERNEL - - if is_crosscompile || tc-is-cross-compiler ; then - multilib_env ${CTARGET_OPT:-${CTARGET}} - - if ! use multilib ; then - MULTILIB_ABIS=${DEFAULT_ABI} - else - MULTILIB_ABIS=${MULTILIB_ABIS:-${DEFAULT_ABI}} - fi - - # If the user has CFLAGS_ in their make.conf, use that, - # and fall back on CFLAGS. - local VAR=CFLAGS_${CTARGET//[-.]/_} - CFLAGS=${!VAR-${CFLAGS}} - einfo " $(printf '%15s' 'Manual CFLAGS:') ${CFLAGS}" - fi - - setup_flags - - export ABI=${ABI:-${DEFAULT_ABI:-default}} - - if use headers-only ; then - # Avoid mixing host's CC and target's CFLAGS_${ABI}: - # At this bootstrap stage we have only binutils for - # target but not compiler yet. - einfo "Skip CC ABI injection. We can't use (cross-)compiler yet." - return 0 - fi - local VAR=CFLAGS_${ABI} - # We need to export CFLAGS with abi information in them because glibc's - # configure script checks CFLAGS for some targets (like mips). Keep - # around the original clean value to avoid appending multiple ABIs on - # top of each other. - : ${__GLIBC_CC:=$(tc-getCC ${CTARGET_OPT:-${CTARGET}})} - export __GLIBC_CC CC="${__GLIBC_CC} ${!VAR}" - einfo " $(printf '%15s' 'Manual CC:') ${CC}" -} - -foreach_abi() { - setup_env - - local ret=0 - local abilist="" - if use multilib ; then - abilist=$(get_install_abis) - else - abilist=${DEFAULT_ABI} - fi - local -x ABI - for ABI in ${abilist:-default} ; do - setup_env - einfo "Running $1 for ABI ${ABI}" - $1 - : $(( ret |= $? )) - done - return ${ret} -} - -glibc_banner() { - local b="Gentoo ${PVR}" - [[ -n ${PATCH_VER} ]] && ! use vanilla && b+=" p${PATCH_VER}" - echo "${b}" -} - -check_devpts() { - # Make sure devpts is mounted correctly for use w/out setuid pt_chown. - - # If merely building the binary package, then there's nothing to verify. - [[ ${MERGE_TYPE} == "buildonly" ]] && return - - # Only sanity check when installing the native glibc. - [[ ${ROOT} != "/" ]] && return - - # If they're opting in to the old suid code, then no need to check. - use suid && return - - if awk '$3 == "devpts" && $4 ~ /[, ]gid=5[, ]/ { exit 1 }' /proc/mounts ; then - eerror "In order to use glibc with USE=-suid, you must make sure that" - eerror "you have devpts mounted at /dev/pts with the gid=5 option." - eerror "Openrc should do this for you, so you should check /etc/fstab" - eerror "and make sure you do not have any invalid settings there." - die "mount & fix your /dev/pts settings" - fi -} - -# The following Kernel version handling functions are mostly copied from portage -# source. It's better not to use linux-info.eclass here since a) it adds too -# much magic, see bug 326693 for some of the arguments, and b) some of the -# functions are just not provided. - -g_get_running_KV() { - uname -r - return $? -} - -g_KV_major() { - [[ -z $1 ]] && return 1 - local KV=$@ - echo "${KV%%.*}" -} - -g_KV_minor() { - [[ -z $1 ]] && return 1 - local KV=$@ - KV=${KV#*.} - echo "${KV%%.*}" -} - -g_KV_micro() { - [[ -z $1 ]] && return 1 - local KV=$@ - KV=${KV#*.*.} - echo "${KV%%[^[:digit:]]*}" -} - -g_KV_to_int() { - [[ -z $1 ]] && return 1 - local KV_MAJOR=$(g_KV_major "$1") - local KV_MINOR=$(g_KV_minor "$1") - local KV_MICRO=$(g_KV_micro "$1") - local KV_int=$(( KV_MAJOR * 65536 + KV_MINOR * 256 + KV_MICRO )) - - # We make version 2.2.0 the minimum version we will handle as - # a sanity check ... if its less, we fail ... - if [[ ${KV_int} -ge 131584 ]] ; then - echo "${KV_int}" - return 0 - fi - return 1 -} - -g_int_to_KV() { - local version=$1 major minor micro - major=$((version / 65536)) - minor=$(((version % 65536) / 256)) - micro=$((version % 256)) - echo ${major}.${minor}.${micro} -} - -eend_KV() { - [[ $(g_KV_to_int $1) -ge $(g_KV_to_int $2) ]] - eend $? -} - -get_kheader_version() { - printf '#include \nLINUX_VERSION_CODE\n' | \ - $(tc-getCPP ${CTARGET}) -I "${EPREFIX}/$(alt_build_headers)" - | \ - tail -n 1 -} - -# We collect all sanity checks here. Consistency is not guranteed between -# pkg_ and src_ phases, so we call this function both in pkg_pretend and in -# src_unpack. -sanity_prechecks() { - # Make sure devpts is mounted correctly for use w/out setuid pt_chown - check_devpts - - # Prevent native builds from downgrading - if [[ ${MERGE_TYPE} != "buildonly" ]] && \ - [[ ${ROOT} == "/" ]] && \ - [[ ${CBUILD} == ${CHOST} ]] && \ - [[ ${CHOST} == ${CTARGET} ]] ; then - - # The high rev # is to allow people to downgrade between -r# - # versions. We want to block 2.20->2.19, but 2.20-r3->2.20-r2 - # should be fine. Hopefully we never actually use a r# this - # high. - if has_version ">${CATEGORY}/${P}-r10000" ; then - eerror "Sanity check to keep you from breaking your system:" - eerror " Downgrading glibc is not supported and a sure way to destruction." - die "Aborting to save your system." - fi - - if ! do_run_test '#include \n#include \nint main(){return syscall(1000)!=-1;}\n' ; then - eerror "Your old kernel is broken. You need to update it to a newer" - eerror "version as syscall() will break. See bug 279260." - die "Old and broken kernel." - fi - fi - - # Users have had a chance to phase themselves, time to give em the boot - if [[ -e ${EROOT}/etc/locale.gen ]] && [[ -e ${EROOT}/etc/locales.build ]] ; then - eerror "You still haven't deleted ${EROOT}/etc/locales.build." - eerror "Do so now after making sure ${EROOT}/etc/locale.gen is kosher." - die "Lazy upgrader detected" - fi - - if [[ ${CTARGET} == i386-* ]] ; then - eerror "i386 CHOSTs are no longer supported." - eerror "Chances are you don't actually want/need i386." - eerror "Please read https://www.gentoo.org/doc/en/change-chost.xml" - die "Please fix your CHOST" - fi - - if [[ -e /proc/xen ]] && [[ $(tc-arch) == "x86" ]] && ! is-flag -mno-tls-direct-seg-refs ; then - ewarn "You are using Xen but don't have -mno-tls-direct-seg-refs in your CFLAGS." - ewarn "This will result in a 50% performance penalty when running with a 32bit" - ewarn "hypervisor, which is probably not what you want." - fi - - use hardened && ! tc-enables-pie && \ - ewarn "PIE hardening not applied, as your compiler doesn't default to PIE" - - # Check for sanity of /etc/nsswitch.conf - if [[ -e ${EROOT}/etc/nsswitch.conf ]] ; then - local entry - for entry in passwd group shadow; do - if ! egrep -q "^[ \t]*${entry}:.*files" "${EROOT}"/etc/nsswitch.conf; then - eerror "Your ${EROOT}/etc/nsswitch.conf is out of date." - eerror "Please make sure you have 'files' entries for" - eerror "'passwd:', 'group:' and 'shadow:' databases." - eerror "For more details see:" - eerror " https://wiki.gentoo.org/wiki/Project:Toolchain/nsswitch.conf_in_glibc-2.26" - die "nsswitch.conf has no 'files' provider in '${entry}'." - fi - done - fi - - # ABI-specific checks follow here. Hey, we have a lot more specific conditions that - # we test for... - if ! is_crosscompile ; then - if use amd64 && use multilib && [[ ${MERGE_TYPE} != "binary" ]] ; then - ebegin "Checking that IA32 emulation is enabled in the running kernel" - echo 'int main(){return 0;}' > "${T}/check-ia32-emulation.c" - local STAT - if "${CC-${CHOST}-gcc}" ${CFLAGS_x86} "${T}/check-ia32-emulation.c" -o "${T}/check-ia32-emulation.elf32"; then - "${T}/check-ia32-emulation.elf32" - STAT=$? - else - # Don't fail here to allow single->multi ABI switch - # or recover from breakage like bug #646424 - ewarn "Failed to compile the ABI test. Broken host glibc?" - STAT=0 - fi - rm -f "${T}/check-ia32-emulation.elf32" - eend $STAT - [[ $STAT -eq 0 ]] || die "CONFIG_IA32_EMULATION must be enabled in the kernel to compile a multilib glibc." - fi - - fi - - # When we actually have to compile something... - if ! just_headers ; then - local run_kv build_kv want_kv - - run_kv=$(g_get_running_KV) - build_kv=$(g_int_to_KV $(get_kheader_version)) - want_kv=${MIN_KERN_VER} - - ebegin "Checking gcc for __thread support" - if ! eend $(want__thread ; echo $?) ; then - echo - eerror "Could not find a gcc that supports the __thread directive!" - eerror "Please update your binutils/gcc and try again." - die "No __thread support in gcc!" - fi - - if ! is_crosscompile && ! tc-is-cross-compiler ; then - # Building fails on an non-supporting kernel - ebegin "Checking running kernel version (${run_kv} >= ${want_kv})" - if ! eend_KV ${run_kv} ${want_kv} ; then - echo - eerror "You need a kernel of at least ${want_kv}!" - die "Kernel version too low!" - fi - fi - - ebegin "Checking linux-headers version (${build_kv} >= ${want_kv})" - if ! eend_KV ${build_kv} ${want_kv} ; then - echo - eerror "You need linux-headers of at least ${want_kv}!" - die "linux-headers version too low!" - fi - fi -} - -# -# the phases -# - -# pkg_pretend - -pkg_pretend() { - # All the checks... - einfo "Checking general environment sanity." - sanity_prechecks -} - -# src_unpack - -src_unpack() { - # Consistency is not guaranteed between pkg_ and src_ ... - sanity_prechecks - - use multilib && unpack gcc-multilib-bootstrap-${GCC_BOOTSTRAP_VER}.tar.xz - - setup_env - - if [[ -n ${EGIT_REPO_URI} ]] ; then - git-r3_src_unpack - else - unpack ${P}.tar.xz - fi - - cd "${S}" || die - touch locale/C-translit.h || die #185476 #218003 - - cd "${WORKDIR}" || die - unpack glibc-${RELEASE_VER}-patches-${PATCH_VER}.tar.bz2 -} - -src_prepare() { - if ! use vanilla ; then - elog "Applying Gentoo Glibc Patchset ${RELEASE_VER}-${PATCH_VER}" - eapply "${WORKDIR}"/patches - einfo "Done." - fi - - default - - gnuconfig_update - - cd "${WORKDIR}" - find . -name configure -exec touch {} + - - eprefixify extra/locale/locale-gen - - # Fix permissions on some of the scripts. - chmod u+x "${S}"/scripts/*.sh - - cd "${S}" -} - -glibc_do_configure() { - # Glibc does not work with gold (for various reasons) #269274. - tc-ld-disable-gold - - # CXX isnt handled by the multilib system, so if we dont unset here - # we accumulate crap across abis - unset CXX - - einfo "Configuring glibc for nptl" - - if use doc ; then - export MAKEINFO=makeinfo - else - export MAKEINFO=/dev/null - fi - - local v - for v in ABI CBUILD CHOST CTARGET CBUILD_OPT CTARGET_OPT CC CXX LD {AS,C,CPP,CXX,LD}FLAGS MAKEINFO ; do - einfo " $(printf '%15s' ${v}:) ${!v}" - done - - # CFLAGS can contain ABI-specific flags like -mfpu=neon, see bug #657760 - # To build .S (assembly) files with the same ABI-specific flags - # upstream currently recommends adding CFLAGS to CC/CXX: - # https://sourceware.org/PR23273 - # Note: Passing CFLAGS via CPPFLAGS overrides glibc's arch-specific CFLAGS - # and breaks multiarch support. See 659030#c3 for an example. - - # The glibc configure script doesn't properly use LDFLAGS all the time. - export CC="$(tc-getCC ${CTARGET}) ${CFLAGS} ${LDFLAGS}" - einfo " $(printf '%15s' 'Manual CC:') ${CC}" - - # Some of the tests are written in C++, so we need to force our multlib abis in, bug 623548 - export CXX="$(tc-getCXX ${CTARGET}) $(get_abi_CFLAGS) ${CFLAGS}" - einfo " $(printf '%15s' 'Manual CXX:') ${CXX}" - - echo - - local myconf=() - - case ${CTARGET} in - powerpc-*) - # Currently gcc on powerpc32 generates invalid code for - # __builtin_return_address(0) calls. Normally programs - # don't do that but malloc hooks in glibc do: - # https://gcc.gnu.org/PR81996 - # https://bugs.gentoo.org/629054 - myconf+=( --enable-stack-protector=no ) - ;; - *) - myconf+=( --enable-stack-protector=all ) - ;; - esac - myconf+=( --enable-stackguard-randomization ) - - # Keep a whitelist of targets supporing IFUNC. glibc's ./configure - # is not robust enough to detect proper support: - # https://bugs.gentoo.org/641216 - # https://sourceware.org/PR22634#c0 - case $(tc-arch ${CTARGET}) in - # Keep whitelist of targets where autodetection mostly works. - amd64|x86|sparc|ppc|ppc64|arm|arm64|s390) ;; - # Blacklist everywhere else - *) myconf+=( libc_cv_ld_gnu_indirect_function=no ) ;; - esac - - [[ $(tc-is-softfloat) == "yes" ]] && myconf+=( --without-fp ) - - myconf+=( --enable-kernel=${MIN_KERN_VER} ) - - # Since SELinux support is only required for nscd, only enable it if: - # 1. USE selinux - # 2. only for the primary ABI on multilib systems - # 3. Not a crosscompile - if ! is_crosscompile && use selinux ; then - if use multilib ; then - if is_final_abi ; then - myconf+=( --with-selinux ) - else - myconf+=( --without-selinux ) - fi - else - myconf+=( --with-selinux ) - fi - else - myconf+=( --without-selinux ) - fi - - # Force a few tests where we always know the answer but - # configure is incapable of finding it. - if is_crosscompile ; then - export \ - libc_cv_c_cleanup=yes \ - libc_cv_forced_unwind=yes - fi - - myconf+=( - --without-cvs - --disable-werror - --enable-bind-now - --build=${CBUILD_OPT:-${CBUILD}} - --host=${CTARGET_OPT:-${CTARGET}} - $(use_enable profile) - $(use_with gd) - --with-headers=$(alt_build_headers) - --prefix="${EPREFIX}/usr" - --sysconfdir="${EPREFIX}/etc" - --localstatedir="${EPREFIX}/var" - --libdir='$(prefix)'/$(get_libdir) - --mandir='$(prefix)'/share/man - --infodir='$(prefix)'/share/info - --libexecdir='$(libdir)'/misc/glibc - --with-bugurl=https://bugs.gentoo.org/ - --with-pkgversion="$(glibc_banner)" - $(use_multiarch || echo --disable-multi-arch) - $(use_enable systemtap) - $(use_enable nscd) - ${EXTRA_ECONF} - ) - - # We rely on sys-libs/timezone-data for timezone tools normally. - myconf+=( $(use_enable vanilla timezone-tools) ) - - # These libs don't have configure flags. - ac_cv_lib_audit_audit_log_user_avc_message=$(usex audit || echo no) - ac_cv_lib_cap_cap_init=$(usex caps || echo no) - - # There is no configure option for this and we need to export it - # since the glibc build will re-run configure on itself - export libc_cv_rootsbindir="${EPREFIX}/sbin" - export libc_cv_slibdir="${EPREFIX}/$(get_libdir)" - - # We take care of patching our binutils to use both hash styles, - # and many people like to force gnu hash style only, so disable - # this overriding check. #347761 - export libc_cv_hashstyle=no - - local builddir=$(builddir nptl) - mkdir -p "${builddir}" - cd "${builddir}" - set -- "${S}"/configure "${myconf[@]}" - echo "$@" - "$@" || die "failed to configure glibc" - - # ia64 static cross-compilers are a pita in so much that they - # can't produce static ELFs (as the libgcc.a is broken). so - # disable building of the programs for those targets if it - # doesn't work. - # XXX: We could turn this into a compiler test, but ia64 is - # the only one that matters, so this should be fine for now. - if is_crosscompile && [[ ${CTARGET} == ia64* ]] ; then - sed -i '1i+link-static = touch $@' config.make - fi - - # If we're trying to migrate between ABI sets, we need - # to lie and use a local copy of gcc. Like if the system - # is built with MULTILIB_ABIS="amd64 x86" but we want to - # add x32 to it, gcc/glibc don't yet support x32. - # - if [[ -n ${GCC_BOOTSTRAP_VER} ]] && use multilib ; then - echo 'main(){}' > "${T}"/test.c - if ! $(tc-getCC ${CTARGET}) ${CFLAGS} ${LDFLAGS} "${T}"/test.c -Wl,-emain -lgcc 2>/dev/null ; then - sed -i -e '/^CC = /s:$: -B$(objdir)/../'"gcc-multilib-bootstrap-${GCC_BOOTSTRAP_VER}/${ABI}:" config.make || die - fi - fi -} - -glibc_headers_configure() { - export ABI=default - - local builddir=$(builddir "headers") - mkdir -p "${builddir}" - cd "${builddir}" - - # if we don't have a compiler yet, we can't really test it now ... - # hopefully they don't affect header generation, so let's hope for - # the best here ... - local v vars=( - ac_cv_header_cpuid_h=yes - libc_cv_{386,390,alpha,arm,hppa,ia64,mips,{powerpc,sparc}{,32,64},sh,x86_64}_tls=yes - libc_cv_asm_cfi_directives=yes - libc_cv_broken_visibility_attribute=no - libc_cv_c_cleanup=yes - libc_cv_compiler_powerpc64le_binary128_ok=yes - libc_cv_forced_unwind=yes - libc_cv_gcc___thread=yes - libc_cv_mlong_double_128=yes - libc_cv_mlong_double_128ibm=yes - libc_cv_ppc_machine=yes - libc_cv_ppc_rel16=yes - libc_cv_predef_fortify_source=no - libc_cv_target_power8_ok=yes - libc_cv_visibility_attribute=yes - libc_cv_z_combreloc=yes - libc_cv_z_execstack=yes - libc_cv_z_initfirst=yes - libc_cv_z_nodelete=yes - libc_cv_z_nodlopen=yes - libc_cv_z_relro=yes - libc_mips_abi=${ABI} - libc_mips_float=$([[ $(tc-is-softfloat) == "yes" ]] && echo soft || echo hard) - # These libs don't have configure flags. - ac_cv_lib_audit_audit_log_user_avc_message=no - ac_cv_lib_cap_cap_init=no - ) - - einfo "Forcing cached settings:" - for v in "${vars[@]}" ; do - einfo " ${v}" - export ${v} - done - - local headers_only_arch_CPPFLAGS=() - - # Blow away some random CC settings that screw things up. #550192 - if [[ -d ${S}/sysdeps/mips ]]; then - pushd "${S}"/sysdeps/mips >/dev/null - sed -i -e '/^CC +=/s:=.*:= -D_MIPS_SZPTR=32:' mips32/Makefile mips64/n32/Makefile || die - sed -i -e '/^CC +=/s:=.*:= -D_MIPS_SZPTR=64:' mips64/n64/Makefile || die - - # Force the mips ABI to the default. This is OK because the set of - # installed headers in this phase is the same between the 3 ABIs. - # If this ever changes, this hack will break, but that's unlikely - # as glibc discourages that behavior. - # https://crbug.com/647033 - sed -i -e 's:abiflag=.*:abiflag=_ABIO32:' preconfigure || die - - popd >/dev/null - fi - - case ${CTARGET} in - riscv*) - # RISC-V interrogates the compiler to determine which target to - # build. If building the headers then we don't strictly need a - # RISC-V compiler, so the built-in definitions that are provided - # along with all RISC-V compiler might not exist. This causes - # glibc's RISC-V preconfigure script to blow up. Since we're just - # building the headers any value will actually work here, so just - # pick the standard one (rv64g/lp64d) to make the build scripts - # happy for now -- the headers are all the same anyway so it - # doesn't matter. - headers_only_arch_CPPFLAGS+=( - -D__riscv_xlen=64 - -D__riscv_flen=64 - -D__riscv_float_abi_double=1 - -D__riscv_atomic=1 - ) ;; - esac - - local myconf=() - myconf+=( - --disable-sanity-checks - --enable-hacker-mode - --without-cvs - --disable-werror - --enable-bind-now - --build=${CBUILD_OPT:-${CBUILD}} - --host=${CTARGET_OPT:-${CTARGET}} - --with-headers=$(alt_build_headers) - --prefix="${EPREFIX}/usr" - ${EXTRA_ECONF} - ) - - # Nothing is compiled here which would affect the headers for the target. - # So forcing CC/CFLAGS is sane. - local headers_only_CC=$(tc-getBUILD_CC) - local headers_only_CFLAGS="-O1 -pipe" - local headers_only_CPPFLAGS="-U_FORTIFY_SOURCE ${headers_only_arch_CPPFLAGS[*]}" - local headers_only_LDFLAGS="" - set -- "${S}"/configure "${myconf[@]}" - echo \ - "CC=${headers_only_CC}" \ - "CFLAGS=${headers_only_CFLAGS}" \ - "CPPFLAGS=${headers_only_CPPFLAGS}" \ - "LDFLAGS=${headers_only_LDFLAGS}" \ - "$@" - CC=${headers_only_CC} \ - CFLAGS=${headers_only_CFLAGS} \ - CPPFLAGS=${headers_only_CPPFLAGS} \ - LDFLAGS="" \ - "$@" || die "failed to configure glibc" -} - -do_src_configure() { - if just_headers ; then - glibc_headers_configure - else - glibc_do_configure nptl - fi -} - -src_configure() { - foreach_abi do_src_configure -} - -do_src_compile() { - emake -C "$(builddir nptl)" || die "make nptl for ${ABI} failed" -} - -src_compile() { - if just_headers ; then - return - fi - - foreach_abi do_src_compile -} - -glibc_src_test() { - cd "$(builddir nptl)" - emake check -} - -do_src_test() { - local ret=0 - - glibc_src_test - : $(( ret |= $? )) - - return ${ret} -} - -src_test() { - if just_headers ; then - return - fi - - # Give tests more time to complete. - export TIMEOUTFACTOR=5 - - foreach_abi do_src_test || die "tests failed" -} - -run_locale_gen() { - # if the host locales.gen contains no entries, we'll install everything - local root="$1" - local locale_list="${root}/etc/locale.gen" - if [[ -z $(locale-gen --list --config "${locale_list}") ]] ; then - ewarn "Generating all locales; edit /etc/locale.gen to save time/space" - locale_list="${root}/usr/share/i18n/SUPPORTED" - fi - - locale-gen --jobs $(makeopts_jobs) --config "${locale_list}" \ - --destdir "${root}" -} - -glibc_do_src_install() { - local builddir=$(builddir nptl) - cd "${builddir}" - - emake install_root="${D}$(alt_prefix)" install || die - - # This version (2.26) provides some compatibility libraries for the NIS/NIS+ support - # which come without headers etc. Only needed for binary packages since the - # external net-libs/libnsl has increased soversion. Keep only versioned libraries. - find "${D}" -name "libnsl.a" -delete - find "${D}" -name "libnsl.so" -delete - - # Normally upstream_pv is ${PV}. Live ebuilds are exception, there we need - # to infer upstream version: - # '#define VERSION "2.26.90"' -> '2.26.90' - local upstream_pv=$(sed -n -r 's/#define VERSION "(.*)"/\1/p' "${S}"/version.h) - - if [[ -e ${ED}$(alt_usrlibdir)/libm-${upstream_pv}.a ]] ; then - # Move versioned .a file out of libdir to evade portage QA checks - # instead of using gen_usr_ldscript(). We fix ldscript as: - # "GROUP ( /usr/lib64/libm-.a ..." -> "GROUP ( /usr/lib64/glibc-/libm-.a ..." - sed -i "s@\(libm-${upstream_pv}.a\)@${P}/\1@" "${ED}"$(alt_usrlibdir)/libm.a || die - dodir $(alt_usrlibdir)/${P} - mv "${ED}"$(alt_usrlibdir)/libm-${upstream_pv}.a "${ED}"$(alt_usrlibdir)/${P}/libm-${upstream_pv}.a || die - fi - - # We'll take care of the cache ourselves - rm -f "${ED}"/etc/ld.so.cache - - # Everything past this point just needs to be done once ... - is_final_abi || return 0 - - # Make sure the non-native interp can be found on multilib systems even - # if the main library set isn't installed into the right place. Maybe - # we should query the active gcc for info instead of hardcoding it ? - local i ldso_abi ldso_name - local ldso_abi_list=( - # x86 - amd64 /lib64/ld-linux-x86-64.so.2 - x32 /libx32/ld-linux-x32.so.2 - x86 /lib/ld-linux.so.2 - # mips - o32 /lib/ld.so.1 - n32 /lib32/ld.so.1 - n64 /lib64/ld.so.1 - # powerpc - ppc /lib/ld.so.1 - ppc64 /lib64/ld64.so.1 - # s390 - s390 /lib/ld.so.1 - s390x /lib/ld64.so.1 - # sparc - sparc32 /lib/ld-linux.so.2 - sparc64 /lib64/ld-linux.so.2 - ) - case $(tc-endian) in - little) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64.so.1 - ) - ;; - big) - ldso_abi_list+=( - # arm - arm64 /lib/ld-linux-aarch64_be.so.1 - ) - ;; - esac - if [[ ${SYMLINK_LIB} == "yes" ]] && [[ ! -e ${ED}/$(alt_prefix)/lib ]] ; then - dosym $(get_abi_LIBDIR ${DEFAULT_ABI}) $(alt_prefix)/lib - fi - for (( i = 0; i < ${#ldso_abi_list[@]}; i += 2 )) ; do - ldso_abi=${ldso_abi_list[i]} - has ${ldso_abi} $(get_install_abis) || continue - - ldso_name="$(alt_prefix)${ldso_abi_list[i+1]}" - if [[ ! -L ${ED}/${ldso_name} && ! -e ${ED}/${ldso_name} ]] ; then - dosym ../$(get_abi_LIBDIR ${ldso_abi})/${ldso_name##*/} ${ldso_name} - fi - done - - # With devpts under Linux mounted properly, we do not need the pt_chown - # binary to be setuid. This is because the default owners/perms will be - # exactly what we want. - if ! use suid ; then - find "${ED}" -name pt_chown -exec chmod -s {} + - fi - - ################################################################# - # EVERYTHING AFTER THIS POINT IS FOR NATIVE GLIBC INSTALLS ONLY # - # Make sure we install some symlink hacks so that when we build - # a 2nd stage cross-compiler, gcc finds the target system - # headers correctly. See gcc/doc/gccinstall.info - if is_crosscompile ; then - # We need to make sure that /lib and /usr/lib always exists. - # gcc likes to use relative paths to get to its multilibs like - # /usr/lib/../lib64/. So while we don't install any files into - # /usr/lib/, we do need it to exist. - keepdir $(alt_prefix)/lib - keepdir $(alt_prefix)/usr/lib - - dosym usr/include $(alt_prefix)/sys-include - return 0 - fi - - # Files for Debian-style locale updating - dodir /usr/share/i18n - sed \ - -e "/^#/d" \ - -e "/SUPPORTED-LOCALES=/d" \ - -e "s: \\\\::g" -e "s:/: :g" \ - "${S}"/localedata/SUPPORTED > "${ED}"/usr/share/i18n/SUPPORTED \ - || die "generating /usr/share/i18n/SUPPORTED failed" - cd "${WORKDIR}"/extra/locale - dosbin locale-gen - doman *.[0-8] - insinto /etc - doins locale.gen - - # Make sure all the ABI's can find the locales and so we only - # have to generate one set - local a - keepdir /usr/$(get_libdir)/locale - for a in $(get_install_abis) ; do - if [[ ! -e ${ED}/usr/$(get_abi_LIBDIR ${a})/locale ]] ; then - dosym ../$(get_libdir)/locale /usr/$(get_abi_LIBDIR ${a})/locale - fi - done - - cd "${S}" - - # Install misc network config files - insinto /etc - doins nscd/nscd.conf posix/gai.conf nss/nsswitch.conf - doins "${WORKDIR}"/extra/etc/*.conf - - if use nscd ; then - doinitd "$(prefixify_ro "${WORKDIR}"/extra/etc/nscd)" - - local nscd_args=( - -e "s:@PIDFILE@:$(strings "${ED}"/usr/sbin/nscd | grep nscd.pid):" - ) - - sed -i "${nscd_args[@]}" "${ED}"/etc/init.d/nscd - - systemd_dounit nscd/nscd.service - systemd_newtmpfilesd nscd/nscd.tmpfiles nscd.conf - else - # Do this since extra/etc/*.conf above might have nscd.conf. - rm -f "${ED}"/etc/nscd.conf - fi - - echo 'LDPATH="include ld.so.conf.d/*.conf"' > "${T}"/00glibc - doenvd "${T}"/00glibc - - for d in BUGS ChangeLog CONFORMANCE FAQ NEWS NOTES PROJECTS README* ; do - [[ -s ${d} ]] && dodoc ${d} - done - dodoc -r ChangeLog.old - - # Prevent overwriting of the /etc/localtime symlink. We'll handle the - # creation of the "factory" symlink in pkg_postinst(). - rm -f "${ED}"/etc/localtime - - # Generate all locales if this is a native build as locale generation - if use compile-locales && ! is_crosscompile ; then - run_locale_gen "${ED}" - fi -} - -glibc_headers_install() { - local builddir=$(builddir "headers") - cd "${builddir}" - emake install_root="${D}$(alt_prefix)" install-headers - - insinto $(alt_headers)/gnu - doins "${S}"/include/gnu/stubs.h - - # Make sure we install the sys-include symlink so that when - # we build a 2nd stage cross-compiler, gcc finds the target - # system headers correctly. See gcc/doc/gccinstall.info - dosym usr/include $(alt_prefix)/sys-include -} - -src_strip() { - # gdb is lame and requires some debugging information to remain in - # libpthread, so we need to strip it by hand. libthread_db makes no - # sense stripped as it is only used when debugging. - local pthread=$(has splitdebug ${FEATURES} && echo "libthread_db" || echo "lib{pthread,thread_db}") - env \ - -uRESTRICT \ - CHOST=${CTARGET} \ - STRIP_MASK="/*/{,tls/}${pthread}*" \ - prepallstrip - # if user has stripping enabled and does not have split debug turned on, - # then leave the debugging sections in libpthread. - if ! has nostrip ${FEATURES} && ! has splitdebug ${FEATURES} ; then - ${STRIP:-${CTARGET}-strip} --strip-debug "${ED}"$(alt_prefix)/*/libpthread-*.so - fi -} - -src_install() { - if just_headers ; then - export ABI=default - glibc_headers_install - return - fi - - foreach_abi glibc_do_src_install - src_strip -} - -# Simple test to make sure our new glibc isn't completely broken. -# Make sure we don't test with statically built binaries since -# they will fail. Also, skip if this glibc is a cross compiler. -# -# If coreutils is built with USE=multicall, some of these files -# will just be wrapper scripts, not actual ELFs we can test. -glibc_sanity_check() { - cd / #228809 - - # We enter ${ED} so to avoid trouble if the path contains - # special characters; for instance if the path contains the - # colon character (:), then the linker will try to split it - # and look for the libraries in an unexpected place. This can - # lead to unsafe code execution if the generated prefix is - # within a world-writable directory. - # (e.g. /var/tmp/portage:${HOSTNAME}) - pushd "${ED}"/$(get_libdir) >/dev/null - - local x striptest - for x in cal date env free ls true uname uptime ; do - x=$(type -p ${x}) - [[ -z ${x} || ${x} != ${EPREFIX}/* ]] && continue - striptest=$(LC_ALL="C" file -L ${x} 2>/dev/null) || continue - case ${striptest} in - *"statically linked"*) continue;; - *"ASCII text"*) continue;; - esac - # We need to clear the locale settings as the upgrade might want - # incompatible locale data. This test is not for verifying that. - LC_ALL=C \ - ./ld-*.so --library-path . ${x} > /dev/null \ - || die "simple run test (${x}) failed" - done - - popd >/dev/null -} - -pkg_preinst() { - # nothing to do if just installing headers - just_headers && return - - # prepare /etc/ld.so.conf.d/ for files - mkdir -p "${EROOT}"/etc/ld.so.conf.d - - # Default /etc/hosts.conf:multi to on for systems with small dbs. - if [[ $(wc -l < "${EROOT}"/etc/hosts) -lt 1000 ]] ; then - sed -i '/^multi off/s:off:on:' "${ED}"/etc/host.conf - einfo "Defaulting /etc/host.conf:multi to on" - fi - - [[ ${ROOT} != "/" ]] && return 0 - [[ -d ${ED}/$(get_libdir) ]] || return 0 - [[ -z ${BOOTSTRAP_RAP} ]] && glibc_sanity_check -} - -pkg_postinst() { - # nothing to do if just installing headers - just_headers && return - - if ! tc-is-cross-compiler && [[ -x ${EROOT}/usr/sbin/iconvconfig ]] ; then - # Generate fastloading iconv module configuration file. - "${EROOT}"/usr/sbin/iconvconfig --prefix="${ROOT}" - fi - - if ! is_crosscompile && [[ ${ROOT} == "/" ]] ; then - # Reload init ... if in a chroot or a diff init package, ignore - # errors from this step #253697 - /sbin/telinit U 2>/dev/null - - use compile-locales || run_locale_gen "${EROOT}" - fi - - # Check for sanity of /etc/nsswitch.conf, take 2 - if [[ -e ${EROOT}/etc/nsswitch.conf ]] && ! has_version sys-auth/libnss-nis ; then - local entry - for entry in passwd group shadow; do - if egrep -q "^[ \t]*${entry}:.*nis" "${EROOT}"/etc/nsswitch.conf; then - ewarn "" - ewarn "Your ${EROOT}/etc/nsswitch.conf uses NIS. Support for that has been" - ewarn "removed from glibc and is now provided by the package" - ewarn " sys-auth/libnss-nis" - ewarn "Install it now to keep your NIS setup working." - ewarn "" - fi - done - fi -} -- cgit v1.2.3