Merge pull request #43 from V3n3RiX/master

prevent genkernel from installing firmware files...please read the comment before merging @StefanCristian

7 files changed, 184 insertions, 0 deletions

diff --git a/app-misc/calamares-config-kogaion/calamares-config-kogaion-2.0.ebuild b/app-misc/calamares-config-kogaion/calamares-config-kogaion-2.0.ebuild
new file mode 100644
index 00000000..f5d560ae
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/calamares-config-kogaion-2.0.ebuild
@@ -0,0 +1,25 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+EAPI=5
+
+DESCRIPTION="Kogaion Linux Calamares modules config"
+HOMEPAGE=""
+SRC_URI=""
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+IUSE=""
+
+DEPEND="app-admin/calamares"
+RDEPEND="${DEPEND}"
+
+S="${FILESDIR}"
+
+src_install() {
+	dodir "/etc/calamares" || die
+	insinto "/etc/calamares" || die
+	doins -r "${S}/"* || die
+}
diff --git a/app-misc/calamares-config-kogaion/files/modules/bootloader.conf b/app-misc/calamares-config-kogaion/files/modules/bootloader.conf
new file mode 100644
index 00000000..8ee8e661
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/modules/bootloader.conf
@@ -0,0 +1,26 @@
+---
+# Define which bootloader you want to use for EFI installations
+# Possible options are 'grub' and 'systemd-boot'.
+efiBootLoader: "grub"
+
+# systemd-boot configuration files settings, set kernel and initramfs file names
+# and amount of time before default selection boots
+kernel: "/boot/bzImage"
+img: "/boot/Initrd"
+timeout: "10"
+# Optionally set the menu entry name and kernel name to use in systemd-boot.
+# If not specified here, these settings will be taken from branding.desc.
+# bootloaderEntryName: "Generic GNU/Linux"
+# kernelLine: ", with Stable-Kernel"
+# fallbackKernelLine:  ", with Stable-Kernel (fallback initramfs)"
+
+# GRUB 2 binary names and boot directory
+# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names.
+grubInstall: "grub2-install"
+grubMkconfig: "grub2-mkconfig"
+grubCfg: "/boot/grub/grub.cfg"
+# Optionally set the --bootloader-id to use for EFI. If not set, this defaults
+# to the bootloaderEntryName from branding.desc with problematic characters
+# replaced. If an efiBootloaderId is specified here, it is taken to already be a
+# valid directory name, so no such postprocessing is done in this case.
+# efiBootloaderId: "dirname"
diff --git a/app-misc/calamares-config-kogaion/files/modules/keyboard.conf b/app-misc/calamares-config-kogaion/files/modules/keyboard.conf
new file mode 100644
index 00000000..ff60ed60
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/modules/keyboard.conf
@@ -0,0 +1,8 @@
+---
+# The name of the file to write X11 keyboard settings to
+# The default value is the name used by upstream systemd-localed.
+# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d
+xOrgConfFileName: "/usr/share/X11/xorg.conf.d/00-keyboard.conf"
+# The path to search for keymaps converted from X11 to kbd format
+# Leave this empty if the setting does not make sense on your distribution.
+convertedKeymapPath: "/usr/share/keymaps/"
diff --git a/app-misc/calamares-config-kogaion/files/modules/packages.conf b/app-misc/calamares-config-kogaion/files/modules/packages.conf
new file mode 100644
index 00000000..f8c72ad0
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/modules/packages.conf
@@ -0,0 +1,45 @@
+---
+#
+# Which package manager to use, options are:
+#  - packagekit  - PackageKit CLI tool
+#  - zypp        - Zypp RPM frontend
+#  - yum         - Yum RPM frontend
+#  - dnf         - DNF, the new RPM frontend
+#  - urpmi       - Mandriva package manager
+#  - apt         - APT frontend for DEB and RPM
+#  - pacman      - Pacman
+#  - portage	 - Gentoo package manager
+#  - entropy	 - Sabayon package manager
+#
+backend: entropy
+#
+# List of maps with package operations such as install or remove.
+# Distro developers can provide a list of packages to remove
+# from the installed system (for instance packages meant only
+# for the live system).
+#
+# A job implementing a distro specific logic to determine other
+# packages that need to be installed or removed can run before
+# this one. Distro developers may want to install locale packages
+# or remove drivers not needed on the installed system.
+# This job will populate a list of dictionaries in the global
+# storage called "packageOperations" and it is processed
+# after the static list in the job configuration.
+#
+#operations:
+#  - install:
+#      - pkg1
+#      - pkg2
+#  - remove:
+#      - pkg3
+#      - pkg4
+#  - install:
+#      - pkg5
+#  - remove:
+#      - pkg2
+#      - pkg1
+#    install:
+#      - pkgs6
+#      - pkg7
+#  - localInstall:
+#      - /path/to/pkg8
diff --git a/app-misc/calamares-config-kogaion/files/modules/removeuser.conf b/app-misc/calamares-config-kogaion/files/modules/removeuser.conf
new file mode 100644
index 00000000..748822da
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/modules/removeuser.conf
@@ -0,0 +1,2 @@
+---
+username: kogaionuser
diff --git a/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf b/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf
new file mode 100644
index 00000000..641f5ae0
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf
@@ -0,0 +1,5 @@
+---
+unpack:
+    -   source: "/mnt/cdrom/livecd.squashfs"
+        sourcefs: "squashfs"
+        destination: ""
diff --git a/app-misc/calamares-config-kogaion/files/settings.conf b/app-misc/calamares-config-kogaion/files/settings.conf
new file mode 100644
index 00000000..94ef7951
--- /dev/null
+++ b/app-misc/calamares-config-kogaion/files/settings.conf
@@ -0,0 +1,73 @@
+# Configuration file for Calamares
+# Syntax is YAML 1.2
+---
+# Modules can be job modules (with different interfaces) and QtWidgets view modules.
+# They could all be placed in a number of different paths.
+# "local" is LIBDIR/calamares/modules with settings in SHARE/calamares/modules
+modules-search: [ local ]
+
+# We define the module names in the order they should show up (QtWidget view modules,
+# with one or more pages) OR be executed if enqueued (all other modules).
+# Pages can also enqueue jobs for delayed execution in the order specified for the
+# install phase.
+
+# Phase 1 - prepare.
+# View modules are shown as UI pages, jobs from job modules are executed immediately in
+# the background.
+# Jobs should be executed sparingly (if at all) in this phase.
+prepare:
+- welcome
+- locale
+- keyboard
+- partition
+- users
+- summary
+
+# Phase 2 - install.
+# View modules are not shown. Only the view modules shown in the previous phase are
+# allowed, their names should be added here as placeholders to specify the order in
+# which view module jobs should be enqueued. Job modules are also allowed.
+install:
+#- dummyprocess
+#- dummypython
+- partition
+- mount
+- unpackfs
+- machineid
+- fstab
+- locale
+- keyboard
+- localecfg
+#- initcpiocfg
+#- initcpio
+- users
+- displaymanager
+- networkcfg
+- hwclock
+- services
+#- dracut
+#- initramfs
+- grubcfg
+- bootloader
+- umount
+
+# Phase 3 - postinstall.
+# View modules are shown as UI pages, jobs from job modules are executed immediately in
+# the background.
+# Jobs should be executed sparingly (if at all) in this phase.
+postinstall:
+- finished
+
+
+# A branding component is a directory, either in SHARE/calamares/branding or in
+# /etc/calamares/branding (the latter takes precedence). The directory must contain a
+# YAML file branding.desc which may reference additional resources (such as images) as
+# paths relative to the current directory.
+# Only the name of the branding component (directory) should be specified here, Calamares
+# then takes care of finding it and loading the contents.
+branding: kogaion_branding
+
+# If this is set to true, Calamares will show an "are you sure?" prompt right before the
+# install phase, i.e. at the point of no return. If it's false, no prompt is shown.
+# Default is false.
+prompt-install: false