No audit programs here. deleting this sequence of ebuilds. will replace with compat and broadcom in a few moments

1 files changed, 0 insertions, 122 deletions

diff --git a/net-wireless/compat-wireless/files/whynot.patch b/net-wireless/compat-wireless/files/whynot.patch
deleted file mode 100644
index e932cfdb..00000000
--- a/net-wireless/compat-wireless/files/whynot.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-diff -Naur compat-wireless-2.6.30-rc6.orig/Makefile compat-wireless-2.6.30-rc6/Makefile
---- compat-wireless-2.6.30-rc6.orig/Makefile	2009-05-17 21:48:36.000000000 +0000
-+++ compat-wireless-2.6.30-rc6/Makefile	2009-05-27 12:21:51.000000000 +0000
-@@ -3,13 +3,10 @@
- ifneq ($(origin $(KLIB)), undefined)
- KMODPATH_ARG:=  "INSTALL_MOD_PATH=$(KLIB)"
- else
--export KLIB:=          /lib/modules/$(shell uname -r)
-+export KLIB:=          $(DESTDIR)/lib/modules/$(KVER)
- endif
- export KLIB_BUILD ?=	$(KLIB)/build
- # Sometimes not available in the path
--MODPROBE := /sbin/modprobe
--MADWIFI=$(shell $(MODPROBE) -l ath_pci)
--OLD_IWL=$(shell $(MODPROBE) -l iwl4965)
- 
- ifneq ($(KERNELRELEASE),)
- 
-@@ -59,92 +56,26 @@
- 	@md5sum $(COMPAT_CONFIG) > $(CONFIG_CHECK)
- 
- install: uninstall modules
--	$(MAKE) -C $(KLIB_BUILD) M=$(PWD) $(KMODDIR_ARG) $(KMODPATH_ARG) \
-+	$(MAKE) -C /lib/modules/$(KVER)/build M=$(PWD) $(KMODDIR_ARG) $(KMODPATH_ARG) \
- 		modules_install
- 	@# All the scripts we can use
--	@mkdir -p /usr/lib/compat-wireless/
--	@install scripts/modlib.sh	/usr/lib/compat-wireless/
--	@install scripts/madwifi-unload	/usr/sbin/
-+	@mkdir -p $(DESTDIR)/usr/lib/compat-wireless/
-+	@install scripts/modlib.sh	$(DESTDIR)/usr/lib/compat-wireless/
-+	@mkdir -p $(DESTDIR)/usr/sbin/
-+	@install scripts/madwifi-unload	$(DESTDIR)/usr/sbin/
- 	@# This is to allow switching between drivers without blacklisting
--	@install scripts/athenable	/usr/sbin/
--	@install scripts/b43enable	/usr/sbin/
--	@install scripts/iwl-enable	/usr/sbin/
--	@install scripts/athload	/usr/sbin/
--	@install scripts/b43load	/usr/sbin/
--	@install scripts/iwl-load	/usr/sbin/
--	@if [ ! -z $(MADWIFI) ]; then \
--		echo ;\
--		echo -n "Note: madwifi detected, we're going to disable it. "  ;\
--		echo "If you would like to enable it later you can run:"  ;\
--		echo "    sudo athenable madwifi"  ;\
--		echo ;\
--		echo Running athenable ath5k...;\
--		/usr/sbin/athenable ath5k ;\
--	fi
--	@if [ ! -z $(OLD_IWL) ]; then \
--		echo ;\
--		echo -n "Note: iwl4965 detected, we're going to disable it. "  ;\
--		echo "If you would like to enable it later you can run:"  ;\
--		echo "    sudo iwl-load iwl4965"  ;\
--		echo ;\
--		echo Running iwl-enable iwlagn...;\
--		/usr/sbin/iwl-enable iwlagn ;\
--	fi
-+	@install scripts/athenable	$(DESTDIR)/usr/sbin/
-+	@install scripts/b43enable	$(DESTDIR)/usr/sbin/
-+	@install scripts/iwl-enable	$(DESTDIR)/usr/sbin/
-+	@install scripts/athload	$(DESTDIR)/usr/sbin/
-+	@install scripts/b43load	$(DESTDIR)/usr/sbin/
-+	@install scripts/iwl-load	$(DESTDIR)/usr/sbin/
- 	@# If on distributions like Mandriva which like to
- 	@# compress their modules this will find out and do
- 	@# it for you. Reason is some old version of modutils
- 	@# won't know mac80211.ko should be used instead of
- 	@# mac80211.ko.gz
- 	@./scripts/compress_modules
--	@/sbin/depmod -ae
--	@echo
--	@echo "Currently detected wireless subsystem modules:"
--	@echo 
--	@$(MODPROBE) -l mac80211
--	@$(MODPROBE) -l cfg80211
--	@$(MODPROBE) -l lib80211
--	@$(MODPROBE) -l adm8211
--	@$(MODPROBE) -l at76c50x-usb
--	@$(MODPROBE) -l ath5k
--	@$(MODPROBE) -l ath9k
--	@$(MODPROBE) -l b43
--	@$(MODPROBE) -l b43legacy
--	@$(MODPROBE) -l b44
--	@$(MODPROBE) -l ssb
--	@$(MODPROBE) -l rc80211_simple
--	@$(MODPROBE) -l iwlcore
--	@$(MODPROBE) -l iwl3945
--	@$(MODPROBE) -l iwlagn
--	@$(MODPROBE) -l ipw2100
--	@$(MODPROBE) -l ipw2200
--	@$(MODPROBE) -l libipw
--	@$(MODPROBE) -l lib80211
--	@$(MODPROBE) -l lib80211_crypt
--	@$(MODPROBE) -l libertas_cs
--	@$(MODPROBE) -l libertas_tf
--	@$(MODPROBE) -l libertas_tf_usb
--	@$(MODPROBE) -l ub8xxx
--	@$(MODPROBE) -l p54pci
--	@$(MODPROBE) -l p54usb
--	@$(MODPROBE) -l rt2400pci
--	@$(MODPROBE) -l rt2500pci
--	@$(MODPROBE) -l rt2500usb
--	@$(MODPROBE) -l rt61pci
--	@$(MODPROBE) -l rt73usb
--	@$(MODPROBE) -l usbnet
--	@$(MODPROBE) -l cdc_ether
--	@$(MODPROBE) -l rndis_host
--	@$(MODPROBE) -l rndis_wlan
--	@$(MODPROBE) -l rtl8180
--	@$(MODPROBE) -l rtl8187
--	@$(MODPROBE) -l zd1211rw
--	@echo 
--	@echo Now run:
--	@echo 
--	@echo make unload
--	@echo
--	@echo And then load the wireless module you need. If unsure reboot.
--	@echo
- 
- uninstall:
- 	@# New location, matches upstream