sys-apps/baselayout : revision bump

1 files changed, 0 insertions, 442 deletions

diff --git a/sys-apps/baselayout/baselayout-2.13-r5.ebuild b/sys-apps/baselayout/baselayout-2.13-r5.ebuild
deleted file mode 100644
index cbfd0b2c..00000000
--- a/sys-apps/baselayout/baselayout-2.13-r5.ebuild
+++ /dev/null
@@ -1,442 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit multilib prefix udev
-
-DESCRIPTION="Filesystem baselayout and init scripts"
-HOMEPAGE="https://wiki.gentoo.org/wiki/No_homepage"
-if [[ ${PV} = 9999 ]]; then
-	EGIT_REPO_URI="https://anongit.gentoo.org/git/proj/${PN}.git"
-	inherit git-r3
-else
-	SRC_URI="https://gitweb.gentoo.org/proj/${PN}.git/snapshot/${P}.tar.bz2"
-	KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris ~x86-winnt"
-fi
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="build +split-usr"
-
-DEPEND="acct-group/smbshare
-	sys-apps/fakeroot
-	!net-fs/sambacfg
-	!sys-boot/grubcfg
-	!sys-kernel/dracutcfg"
-RDEPEND="${DEPEND}
-	!sys-apps/baselayout-prefix"
-
-pkg_setup() {
-	multilib_layout
-}
-
-riscv_compat_symlink() {
-	# Here we apply some special sauce for riscv.
-	# Two multilib layouts exist for now:
-	# 1) one level libdirs, (32bit) "lib" and (64bit) "lib64"
-	#    these are chosen by us to closely resemble other arches
-	# 2) two level libdirs, "lib64/lp64d" "lib64/lp64" "lib32/ilp32d" ...
-	#    this is the glibc/gcc default
-	# Unfortunately, the default has only one fallback, which is "lib"
-	# for both 32bit and 64bit. So things do not break in 1), we need
-	# to provide compatibility symlinks...
-
-	# This function has exactly two parameters:
-	# - the default libdir, to determine if 1) or 2) applies
-	# - the location of the symlink (which points to ".")
-
-	# Note: we call this only in the ${SYMLINK_LIB} = no codepath, since
-	# there never was a ${SYMLINK_LIB} = yes riscv profile.
-
-	case ${CHOST} in
-	riscv*)
-		# are we on a one level libdir profile? is there no symlink yet?
-		if [[ ${1} != */* && ! -L ${2} ]] ; then
-			ln -s . $2 || die "Unable to make $2 riscv compatibility symlink"
-		fi
-		;;
-	esac
-}
-
-# Create our multilib dirs - the Makefile has no knowledge of this
-multilib_layout() {
-	local dir def_libdir libdir libdirs
-	local prefix prefix_lst
-	def_libdir=$(get_abi_LIBDIR $DEFAULT_ABI)
-	libdirs=$(get_all_libdirs)
-
-	if [[ -z "${SYMLINK_LIB}" || ${SYMLINK_LIB} = no ]] ; then
-		prefix_lst=( "${EROOT}"/{,usr/,usr/local/} )
-		for prefix in "${prefix_lst[@]}"; do
-			for libdir in ${libdirs}; do
-				dir="${prefix}${libdir}"
-				if [[ -e "${dir}" ]]; then
-					[[ ! -d "${dir}" ]] &&
-						die "${dir} exists but is not a directory"
-					continue
-				fi
-				if ! use split-usr && [[ ${prefix} = ${EROOT}/ ]]; then
-					libdir="${libdir%%/*}"
-					dir="${prefix}${libdir}"
-					einfo "symlinking ${dir} to usr/${libdir}"
-					ln -s usr/${libdir} ${dir} ||
-						die "Unable to make ${dir} symlink"
-				else
-					einfo "creating directory ${dir}"
-					mkdir -p "${dir}" ||
-						die "Unable to create ${dir} directory"
-				fi
-			done
-			[[ -d "${prefix}${def_libdir}" ]] && riscv_compat_symlink "${def_libdir}" "${prefix}${def_libdir}/${DEFAULT_ABI}"
-		done
-		return 0
-	fi
-
-	[ -z "${def_libdir}" ] &&
-		die "your DEFAULT_ABI=$DEFAULT_ABI appears to be invalid"
-
-	# figure out which paths should be symlinks and which should be directories
-	local dirs syms exp d
-	for libdir in ${libdirs} ; do
-		if use split-usr ; then
-			exp=( {,usr/,usr/local/}${libdir} )
-		else
-			exp=( {usr/,usr/local/}${libdir} )
-		fi
-		for d in "${exp[@]}" ; do
-			# most things should be dirs
-			if [ "${SYMLINK_LIB}" = "yes" ] && [ "${libdir}" = "lib" ] ; then
-				[ ! -h "${d}" ] && [ -e "${d}" ] && dirs+=" ${d}"
-			else
-				[ -h "${d}" ] && syms+=" ${d}"
-			fi
-		done
-	done
-	if [ -n "${syms}${dirs}" ] ; then
-		ewarn "Your system profile has SYMLINK_LIB=${SYMLINK_LIB:-no}, so that means you need to"
-		ewarn "have these paths configured as follows:"
-		[ -n "${dirs}" ] && ewarn "symlinks to '${def_libdir}':${dirs}"
-		[ -n "${syms}" ] && ewarn "directories:${syms}"
-		ewarn "The ebuild will attempt to fix these, but only for trivial conversions."
-		ewarn "If things fail, you will need to manually create/move the directories."
-		echo
-	fi
-
-	# setup symlinks and dirs where we expect them to be; do not migrate
-	# data ... just fall over in that case.
-	if use split-usr ; then
-		prefix_lst=( "${EROOT}"/{,usr/,usr/local/} )
-	else
-		prefix_lst=( "${EROOT}"/{usr/,usr/local/} )
-	fi
-	for prefix in "${prefix_lst[@]}"; do
-		if [ "${SYMLINK_LIB}" = yes ] ; then
-			# we need to make sure "lib" points to the native libdir
-			if [ -h "${prefix}lib" ] ; then
-				# it's already a symlink!  assume it's pointing to right place ...
-				continue
-			elif [ -d "${prefix}lib" ] ; then
-				# "lib" is a dir, so need to convert to a symlink
-				ewarn "Converting ${prefix}lib from a dir to a symlink"
-				rm -f "${prefix}lib"/.keep || die
-				if rmdir "${prefix}lib" 2>/dev/null ; then
-					ln -s ${def_libdir} "${prefix}lib" || die
-				else
-					die "non-empty dir found where we needed a symlink: ${prefix}lib"
-				fi
-			else
-				# nothing exists, so just set it up sanely
-				ewarn "Initializing ${prefix}lib as a symlink"
-				mkdir -p "${prefix}" || die
-				rm -f "${prefix}lib" || die
-				ln -s ${def_libdir} "${prefix}lib" || die
-				mkdir -p "${prefix}${def_libdir}" || die #423571
-			fi
-		else
-			# we need to make sure "lib" is a dir
-			if [ -h "${prefix}lib" ] ; then
-				# "lib" is a symlink, so need to convert to a dir
-				ewarn "Converting ${prefix}lib from a symlink to a dir"
-				rm -f "${prefix}lib" || die
-				if [ -d "${prefix}lib32" ] ; then
-					ewarn "Migrating ${prefix}lib32 to ${prefix}lib"
-					mv "${prefix}lib32" "${prefix}lib" || die
-				else
-					mkdir -p "${prefix}lib" || die
-				fi
-			elif [ -d "${prefix}lib" ] && ! has lib32 ${libdirs} ; then
-				# make sure the old "lib" ABI location does not exist; we
-				# only symlinked the lib dir on systems where we moved it
-				# to "lib32" ...
-				case ${CHOST} in
-				i?86*|x86_64*|powerpc*|sparc*|s390*)
-					if [[ -d ${prefix}lib32 && ! -h ${prefix}lib32 ]] ; then
-						rm -f "${prefix}lib32"/.keep || die
-						if ! rmdir "${prefix}lib32" 2>/dev/null ; then
-							ewarn "You need to merge ${prefix}lib32 into ${prefix}lib"
-							die "non-empty dir found where there should be none: ${prefix}lib32"
-						fi
-					fi
-					;;
-				esac
-			else
-				# nothing exists, so just set it up sanely
-				ewarn "Initializing ${prefix}lib as a dir"
-				mkdir -p "${prefix}lib" || die
-			fi
-		fi
-	done
-	if ! use split-usr ; then
-		for libdir in ${libdirs}; do
-			if [[ ! -e "${EROOT}${libdir}" ]]; then
-				ln -s usr/"${libdir}" "${EROOT}${libdir}" ||
-					die "Unable to make ${EROOT}${libdir} symlink"
-			fi
-		done
-	fi
-}
-
-pkg_preinst() {
-	# We need to install directories and maybe some dev nodes when building
-	# stages, but they cannot be in CONTENTS.
-	# Also, we cannot reference $S as binpkg will break so we do this.
-	multilib_layout
-	if use build ; then
-		if use split-usr ; then
-			emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout
-		else
-			emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout-usrmerge
-		fi
-	fi
-	rm -f "${ED}"/usr/share/${PN}/Makefile || die
-
-	# Create symlinks in pkg_preinst to avoid Portage collision check.
-	# Create the symlinks in ${ED} via dosym so that we own it.
-	# Only create the symlinks if it wont cause a conflict in ${EROOT}.
-	if [[ -L ${EROOT}/var/lock || ! -e ${EROOT}/var/lock ]]; then
-		dosym ../run/lock /var/lock
-	fi
-	if [[ -L ${EROOT}/var/run || ! -e ${EROOT}/var/run ]]; then
-		dosym ../run /var/run
-	fi
-}
-
-src_prepare() {
-	default
-	eapply "${FILESDIR}"/"${P}"-redcore.patch
-
-	# don't want symlinked directories in PATH on systems with usr-merge
-	if ! use split-usr && ! use prefix-guest; then
-		sed \
-			-e 's|:/usr/sbin:|:|g' \
-			-e 's|:/sbin:|:|g' \
-			-e 's|:/bin:|:|g' \
-			-i etc/env.d/50baselayout || die
-	fi
-
-	if use prefix; then
-		hprefixify -e "/EUID/s,0,${EUID}," -q '"' etc/profile
-		hprefixify etc/shells share/passwd
-		hprefixify -w '/PATH=/' etc/env.d/50baselayout
-		hprefixify -w 1 etc/env.d/50baselayout
-		echo PATH=/usr/sbin:/sbin:/usr/bin:/bin >> etc/env.d/99host
-
-		# change branding
-		sed -i \
-			-e '/gentoo-release/s/Gentoo Base/Gentoo Prefix Base/' \
-			-e '/make_os_release/s/${OS}/Prefix/' \
-			Makefile || die
-	fi
-
-	# handle multilib paths.  do it here because we want this behavior
-	# regardless of the C library that you're using.  we do explicitly
-	# list paths which the native ldconfig searches, but this isn't
-	# problematic as it doesn't change the resulting ld.so.cache or
-	# take longer to generate.  similarly, listing both the native
-	# path and the symlinked path doesn't change the resulting cache.
-	local libdir ldpaths
-	for libdir in $(get_all_libdirs) ; do
-		if use split-usr || use prefix-guest; then
-			ldpaths+=":${EPREFIX}/${libdir}"
-		fi
-		ldpaths+=":${EPREFIX}/usr/${libdir}"
-		ldpaths+=":${EPREFIX}/usr/local/${libdir}"
-	done
-	echo "LDPATH='${ldpaths#:}'" >> etc/env.d/50baselayout
-
-	# rc-scripts version for testing of features that *should* be present
-	echo "Redcore Linux Hardened - rolling_boulder_uphill" > etc/redcore-release
-}
-
-src_install() {
-	emake \
-		DESTDIR="${ED}" \
-		install
-
-	if [[ ${CHOST} == *-darwin* ]] ; then
-		# add SDK path which contains development manpages
-		echo "MANPATH=${EPREFIX}/MacOSX.sdk/usr/share/man" \
-			> "${ED}"/etc/env.d/98macos-sdk
-	fi
-
-	# need the makefile in pkg_preinst
-	insinto /usr/share/${PN}
-	doins Makefile
-
-	dodoc ChangeLog
-
-	# bug 858596
-	if use prefix-guest ; then
-		dodir sbin
-		cat > "${ED}"/sbin/runscript <<- EOF
-			#!/usr/bin/env sh
-			source "${EPREFIX}/lib/gentoo/functions.sh"
-
-			eerror "runscript/openrc-run not supported by Gentoo Prefix Base System release ${PV}" 1>&2
-			exit 1
-		EOF
-		chmod 755 "${ED}"/sbin/runscript || die
-		cp "${ED}"/sbin/{runscript,openrc-run} || die
-	fi
-
-	############### Redcore Linux ###############
-	#
-	# issue.logo
-	rm "${ED}"/etc/issue.logo
-	#
-	# NetworkManager
-	dodir /etc/NetworkManager
-	insinto /etc/NetworkManager
-	newins "${FILESDIR}"/nmcfg NetworkManager.conf
-	#
-	# dracut
-	dodir /etc/dracut.conf.d
-	insinto /etc/dracut.conf.d
-	newins "${FILESDIR}"/dracutcfg dracut-redcore.conf
-	#
-	# grub
-	dodir /etc/default
-	insinto /etc/default
-	newins "${FILESDIR}"/grubcfg grub
-	#
-	# samba
-	dodir /etc/samba
-	insinto /etc/samba
-	newins "${FILESDIR}"/smbcfg smb.conf
-	keepdir var/lib/samba/usershare
-	# cryptsetup
-	dodir /etc/conf.d
-	insinto /etc/conf.d
-	newins ${FILESDIR}/dmcryptcfg dmcrypt
-	#
-	# esync
-	dodir /etc/security/limits.d
-	insinto /etc/security/limits.d
-	newins ${FILESDIR}/esynccfg 50-esync.conf
-	#
-	# IOsched
-	dodir /lib/udev/rules.d/
-	insinto /lib/udev/rules.d
-	newins ${FILESDIR}/ioschedcfg 60-iosched.rules
-	#
-	# Xorg
-	dodir /usr/share/X11/xorg.conf.d
-	insinto /usr/share/X11/xorg.conf.d
-	newins ${FILESDIR}/xorgcfg 80-synaptics-overrides.conf
-	##############################################
-}
-
-pkg_postinst() {
-	local x
-
-	# We installed some files to /usr/share/baselayout instead of /etc to stop
-	# (1) overwriting the user's settings
-	# (2) screwing things up when attempting to merge files
-	# (3) accidentally packaging up personal files with quickpkg
-	# If they don't exist then we install them
-	for x in master.passwd passwd shadow group fstab ; do
-		[ -e "${EROOT}/etc/${x}" ] && continue
-		[ -e "${EROOT}/usr/share/baselayout/${x}" ] || continue
-		cp -p "${EROOT}/usr/share/baselayout/${x}" "${EROOT}"/etc || die
-	done
-
-	# Force shadow permissions to not be world-readable #260993
-	for x in shadow ; do
-		if [ -e "${EROOT}/etc/${x}" ] ; then
-			chmod o-rwx "${EROOT}/etc/${x}" || die
-		fi
-	done
-	# whine about users that lack passwords #193541
-	if [[ -e "${EROOT}"/etc/shadow ]] ; then
-		local bad_users=$(sed -n '/^[^:]*::/s|^\([^:]*\)::.*|\1|p' "${EROOT}"/etc/shadow)
-		if [[ -n ${bad_users} ]] ; then
-			echo
-			ewarn "The following users lack passwords!"
-			ewarn ${bad_users}
-		fi
-	fi
-
-	# whine about users with invalid shells #215698
-	if [[ -e "${EROOT}"/etc/passwd ]] ; then
-		local bad_shells=$(awk -F: 'system("test -e ${ROOT}" $7) { print $1 " - " $7}' "${EROOT}"/etc/passwd | sort)
-		if [[ -n ${bad_shells} ]] ; then
-			echo
-			ewarn "The following users have non-existent shells!"
-			ewarn "${bad_shells}"
-		fi
-	fi
-
-	# https://bugs.gentoo.org/361349
-	if use kernel_linux; then
-		mkdir -p "${EROOT}"/run || die
-
-		local found fstype mountpoint
-		while read -r _ mountpoint fstype _; do
-		[[ ${mountpoint} = /run ]] && [[ ${fstype} = tmpfs ]] && found=1
-		done < "${ROOT}"/proc/mounts
-		[[ -z ${found} ]] &&
-			ewarn "You should reboot now to get /run mounted with tmpfs!"
-	fi
-
-	for x in ${REPLACING_VERSIONS}; do
-		if ver_test 2.4 -lt ${x}; then
-			ewarn "After updating ${EROOT}/etc/profile, please run"
-			ewarn "env-update && . /etc/profile"
-		fi
-
-		if ver_test 2.6 -lt ${x}; then
-			ewarn "Please run env-update then log out and back in to"
-			ewarn "update your path."
-		fi
-		# clean up after 2.5 typos
-		# https://bugs.gentoo.org/show_bug.cgi?id=656380
-		if [[ ${x} == 2.5 ]]; then
-			rm -fr "${EROOT}/{,usr" || die
-		fi
-	done
-
-	if [[ -e "${EROOT}"/etc/env.d/00basic ]]; then
-		ewarn "${EROOT}/etc/env.d/00basic is now ${EROOT}/etc/env.d/50baselayout"
-		ewarn "Please migrate your changes."
-	fi
-
-
-	############### Redcore Linux ###############
-	rm -rf "${EROOT}"etc/dracut.conf.d/._cfg????_dracut-redcore.conf
-	rm -rf "${EROOT}"etc/default/._cfg????_grub
-	rm -rf "${EROOT}"etc/samba/._cfg????_smb.conf
-	rm -rf "${EROOT}"etc/conf.d/._cfg???_dmcrypt
-	rm -rf "${EROOT}"etc/security/limits.d/._cfg???_50-esync.conf
-	rm -rf "${EROOT}"lib/udev/rules.d/._cfg???_60-iosched.rules
-	chown root:smbshare /var/lib/samba/usershare
-	chmod 1770 /var/lib/samba/usershare
-	udev_reload
-	############################################
-}
-
-pkg_postrm() {
-	############### Redcore Linux ###############
-	udev_reload
-	############################################
-}