diff options
Diffstat (limited to 'app-misc/calamares-config-kogaion')
9 files changed, 0 insertions, 276 deletions
diff --git a/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.1-r5.ebuild b/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.1-r5.ebuild deleted file mode 100644 index 11600728..00000000 --- a/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.1-r5.ebuild +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: $ - -EAPI=5 - -DESCRIPTION="Kogaion Linux Calamares modules config" -HOMEPAGE="" -SRC_URI="" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 x86" -IUSE="" - -RDEPEND="app-admin/calamares" - -S="${FILESDIR}" - -src_install() { - dodir "/etc/calamares" || die - insinto "/etc/calamares" || die - doins -r "${S}/"* || die -} diff --git a/app-misc/calamares-config-kogaion/files/modules/bootloader.conf b/app-misc/calamares-config-kogaion/files/modules/bootloader.conf deleted file mode 100644 index 57c162da..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/bootloader.conf +++ /dev/null @@ -1,26 +0,0 @@ ---- -# Define which bootloader you want to use for EFI installations -# Possible options are 'grub' and 'systemd-boot'. -efiBootLoader: "grub" - -# systemd-boot configuration files settings, set kernel and initramfs file names -# and amount of time before default selection boots -kernel: "/boot/kernel-genkernel-x86_64-4.4.4-kogaion" -img: "/boot/initramfs-genkernel-x86_64-4.4.4-kogaion" -timeout: "10" -# Optionally set the menu entry name and kernel name to use in systemd-boot. -# If not specified here, these settings will be taken from branding.desc. -# bootloaderEntryName: "Generic GNU/Linux" -# kernelLine: ", with Stable-Kernel" -# fallbackKernelLine: ", with Stable-Kernel (fallback initramfs)" - -# GRUB 2 binary names and boot directory -# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names. -grubInstall: "grub2-install" -grubMkconfig: "grub2-mkconfig" -grubCfg: "/boot/grub/grub.cfg" -# Optionally set the --bootloader-id to use for EFI. If not set, this defaults -# to the bootloaderEntryName from branding.desc with problematic characters -# replaced. If an efiBootloaderId is specified here, it is taken to already be a -# valid directory name, so no such postprocessing is done in this case. -# efiBootloaderId: "dirname" diff --git a/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf b/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf deleted file mode 100644 index 2e764a9b..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf +++ /dev/null @@ -1,16 +0,0 @@ ---- -#The DM module attempts to set up all the DMs found in this list, in that precise order. -#It also sets up autologin, if the feature is enabled in globalstorage. -#The displaymanagers list can also be set in globalstorage, and in that case it overrides anything set up here. -displaymanagers: - - lightdm - -#Enable the following settings to force a desktop environment in your displaymanager configuration file: -#defaultDesktopEnvironment: -# executable: "startkde" -# desktopFile: "plasma" - -#If true, try to ensure that the user, group, /var directory etc. for the -#display manager are set up correctly. This is normally done by the distribution -#packages, and best left to them. Therefore, it is disabled by default. -basicSetup: false diff --git a/app-misc/calamares-config-kogaion/files/modules/keyboard.conf b/app-misc/calamares-config-kogaion/files/modules/keyboard.conf deleted file mode 100644 index ff60ed60..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/keyboard.conf +++ /dev/null @@ -1,8 +0,0 @@ ---- -# The name of the file to write X11 keyboard settings to -# The default value is the name used by upstream systemd-localed. -# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d -xOrgConfFileName: "/usr/share/X11/xorg.conf.d/00-keyboard.conf" -# The path to search for keymaps converted from X11 to kbd format -# Leave this empty if the setting does not make sense on your distribution. -convertedKeymapPath: "/usr/share/keymaps/" diff --git a/app-misc/calamares-config-kogaion/files/modules/packages.conf b/app-misc/calamares-config-kogaion/files/modules/packages.conf deleted file mode 100644 index eaec5a1f..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/packages.conf +++ /dev/null @@ -1,40 +0,0 @@ ---- -# -# Which package manager to use, options are: -# - packagekit - PackageKit CLI tool -# - zypp - Zypp RPM frontend -# - yum - Yum RPM frontend -# - dnf - DNF, the new RPM frontend -# - urpmi - Mandriva package manager -# - apt - APT frontend for DEB and RPM -# - pacman - Pacman -# - portage - Gentoo package manager -# - entropy - Sabayon package manager -# -backend: portage -# -# List of maps with package operations such as install or remove. -# Distro developers can provide a list of packages to remove -# from the installed system (for instance packages meant only -# for the live system). -# -# A job implementing a distro specific logic to determine other -# packages that need to be installed or removed can run before -# this one. Distro developers may want to install locale packages -# or remove drivers not needed on the installed system. -# This job will populate a list of dictionaries in the global -# storage called "packageOperations" and it is processed -# after the static list in the job configuration. -# -operations: - - remove: - - app-admin/calamares - - app-misc/calamares-config-kogaion - - app-misc/calamares-runtime - - app-misc/kogaion-live - - x11-themes/kogaion-artwork-calamares -# - install: -# - pkg1 -# - pkg2 -# - localInstall: -# - /path/to/pkg1 diff --git a/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf b/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf deleted file mode 100644 index 91eca93e..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/unpackfs.conf +++ /dev/null @@ -1,5 +0,0 @@ ---- -unpack: - - source: "/dev/mapper/live-base" - sourcefs: "ext4" - destination: "" diff --git a/app-misc/calamares-config-kogaion/files/modules/users.conf b/app-misc/calamares-config-kogaion/files/modules/users.conf deleted file mode 100644 index 183c3f9d..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/users.conf +++ /dev/null @@ -1,22 +0,0 @@ ---- -userGroup: users -defaultGroups: - - lp - - video - - tape - - uucp - - disk - - wheel - - audio - - cdrom - - cdrw - - usb - - plugdev - - portage - - messagebus - - vboxguest - - vboxsf -autologinGroup: autologin -doAutologin: false -setRootPassword: true -doReusePassword: false
\ No newline at end of file diff --git a/app-misc/calamares-config-kogaion/files/modules/welcome.conf b/app-misc/calamares-config-kogaion/files/modules/welcome.conf deleted file mode 100644 index 7e4f3404..00000000 --- a/app-misc/calamares-config-kogaion/files/modules/welcome.conf +++ /dev/null @@ -1,18 +0,0 @@ ---- -showSupportUrl: true -showKnownIssuesUrl: true -showReleaseNotesUrl: true - -requirements: - requiredStorage: 10.0 - requiredRam: 1.0 - check: - - storage - - ram - - power - - internet - - root - required: - - storage - - ram - - root diff --git a/app-misc/calamares-config-kogaion/files/settings.conf b/app-misc/calamares-config-kogaion/files/settings.conf deleted file mode 100644 index f67f4daf..00000000 --- a/app-misc/calamares-config-kogaion/files/settings.conf +++ /dev/null @@ -1,117 +0,0 @@ -# Configuration file for Calamares -# Syntax is YAML 1.2 ---- -# Modules can be job modules (with different interfaces) and QtWidgets view modules. -# They could all be placed in a number of different paths. -# "modules-search" is a list of strings, each of these can either be a full path to a -# directory or the keyword "local". -# "local" means LIBDIR/calamares/modules with settings in SHARE/calamares/modules or -# /etc/calamares/modules. -# YAML: list of strings. -modules-search: [ local ] - -# Instances section. This section is optional, and it defines custom instances for -# modules of any kind. An instance entry has an instance name, a module name, and -# a configuration file name. -# The primary goal of this mechanism is to allow loading multiple instances of the -# same module, with different configuration. If you don't need this, the instances -# section can safely be left empty. -# Module name plus instance name makes an instance key, e.g. "webview@owncloud", -# where "webview" is the module name (for the webview viewmodule) and "owncloud" -# is the instance name, which loads a configuration file named "owncloud.conf" from -# any of the configuration file paths, including the webview module directory. -# This instance key can then be referenced in the sequence section. -# For all modules without a custom instance specification, a default instance is -# generated automatically by Calamares. Therefore a statement such as "webview" in -# the sequence section automatically implies an instance key of "webview@webview" -# even without explicitly defining this instance, and the configuration file for -# this default instance "<modulename>@<modulename>" is always assumed to be -# "<modulename>.conf". -# For more information on running module instances, run Calamares in debug mode -# and check the Modules page in the Debug information interface. -# YAML: list of maps of string:string key-value pairs. - -#instances: -#- id: owncloud -# module: webview -# config: owncloud.conf - -# Sequence section. This section describes the sequence of modules, both -# viewmodules and jobmodules, as they should appear and/or run. -# A jobmodule instance key (or name) can only appear in an exec phase, whereas -# a viewmodule instance key (or name) can appear in both exec and show phases. -# There is no limit to the number of show or exec phases. However, the same module -# instance key should not appear more than once per phase, and deployers should -# take notice that the global storage structure is persistent throughout the -# application lifetime, possibly influencing behavior across phases. -# A show phase defines a sequence of viewmodules (and therefore pages). These -# viewmodules can offer up jobs for the execution queue. -# An exec phase displays a progress page (with brandable slideshow). This progress -# page iterates over the modules listed in the *immediately preceding* show phase, -# and enqueues their jobs, as well as any other jobs from jobmodules, in the order -# defined in the current exec phase. -# It then executes the job queue and clears it. If a viewmodule offers up a job -# for execution, but the module name (or instance key) isn't listed in the -# immediately following exec phase, this job will not be executed. -# WARNING: when upgrading from Calamares 1.1, this section requires manual -# intervention. There are no fixed prepare/install/postinstall phases any more, -# and all limitations on the number of phases, number of pages, and number of -# instances are lifted. -# YAML: list of lists of strings. -sequence: -- show: - - welcome - - locale - - keyboard - - partition - - users - - summary -- exec: - - partition - - mount - - unpackfs - - machineid - - fstab - - locale - - keyboard - - localecfg - - luksbootkeyfile - - dracutlukscfg - - users - - displaymanager - - hwclock - - dracut - - packages - - grubcfg - - bootloader - - umount -- show: - - finished - -# A branding component is a directory, either in SHARE/calamares/branding or in -# /etc/calamares/branding (the latter takes precedence). The directory must contain a -# YAML file branding.desc which may reference additional resources (such as images) as -# paths relative to the current directory. -# A branding component can also ship a QML slideshow for execution pages, along with -# translation files. -# Only the name of the branding component (directory) should be specified here, Calamares -# then takes care of finding it and loading the contents. -# YAML: string. -branding: kogaion_branding - -# If this is set to true, Calamares will show an "Are you sure?" prompt right before -# each execution phase, i.e. at points of no return. If this is set to false, no prompt -# is shown. -# Default is false. -# YAML: boolean. -prompt-install: true - -# If this is set to true, Calamares will execute all target environment commands in the -# current environment, without chroot. This setting is considered experimental, and it -# should only be used when setting up Calamares as a post-install configuration tool, as -# opposed to a full operating system installer. -# Some official Calamares modules are not expected to function with this setting. -# Packagers beware, here be dragons. -# Default is false. -# YAML: boolean. -dont-chroot: false |