5 files changed, 95 insertions, 73 deletions
diff --git a/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.0-r6.ebuild b/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.1.ebuild
index 11600728..11600728 100644
--- a/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.0-r6.ebuild
+++ b/app-misc/calamares-config-kogaion/calamares-config-kogaion-3.1.ebuild
diff --git a/app-misc/calamares-config-kogaion/files/modules/bootloader.conf b/app-misc/calamares-config-kogaion/files/modules/bootloader.conf
index 134ae9a9..57c162da 100644
--- a/app-misc/calamares-config-kogaion/files/modules/bootloader.conf
+++ b/app-misc/calamares-config-kogaion/files/modules/bootloader.conf
@@ -5,8 +5,8 @@ efiBootLoader: "grub"
 
 # systemd-boot configuration files settings, set kernel and initramfs file names
 # and amount of time before default selection boots
-kernel: "/boot/kernel-genkernel-x86_64-3.14.50-kogaion"
-img: "/boot/initramfs-genkernel-x86_64-3.14.50-kogaion"
+kernel: "/boot/kernel-genkernel-x86_64-4.4.4-kogaion"
+img: "/boot/initramfs-genkernel-x86_64-4.4.4-kogaion"
 timeout: "10"
 # Optionally set the menu entry name and kernel name to use in systemd-boot.
 # If not specified here, these settings will be taken from branding.desc.
diff --git a/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf b/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf
index dc53dbb5..2e764a9b 100644
--- a/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf
+++ b/app-misc/calamares-config-kogaion/files/modules/displaymanager.conf
@@ -4,7 +4,6 @@
 #The displaymanagers list can also be set in globalstorage, and in that case it overrides anything set up here.
 displaymanagers:
   - lightdm
-  - lxdm
 
 #Enable the following settings to force a desktop environment in your displaymanager configuration file:
 #defaultDesktopEnvironment:
diff --git a/app-misc/calamares-config-kogaion/files/modules/packages.conf b/app-misc/calamares-config-kogaion/files/modules/packages.conf
index 937eb1f6..eaec5a1f 100644
--- a/app-misc/calamares-config-kogaion/files/modules/packages.conf
+++ b/app-misc/calamares-config-kogaion/files/modules/packages.conf
@@ -32,31 +32,6 @@ operations:
       - app-misc/calamares-config-kogaion
       - app-misc/calamares-runtime
       - app-misc/kogaion-live
-      - dev-cpp/yaml-cpp
-      - dev-qt/designer:5
-      - dev-qt/linguist-tools:5
-      - dev-qt/qtconcurrent:5
-      - dev-qt/qtcore:5
-      - dev-qt/qtdbus:5
-      - dev-qt/qtdeclarative:5
-      - dev-qt/qtgui:5
-      - dev-qt/qtnetwork:5
-      - dev-qt/qtopengl:5
-      - dev-qt/qtprintsupport:5
-      - dev-qt/qtscript:5
-      - dev-qt/qtsvg:5
-      - dev-qt/qttest:5
-      - dev-qt/qtwidgets:5
-      - dev-qt/qtxml:5
-      - dev-qt/qtxmlpatterns:5
-      - kde-frameworks/extra-cmake-modules
-      - kde-frameworks/kconfig
-      - kde-frameworks/kcoreaddons
-      - kde-frameworks/kf-env
-      - kde-frameworks/ki18n
-      - kde-frameworks/solid
-      - sys-apps/dmidecode
-      - sys-auth/polkit-qt5
       - x11-themes/kogaion-artwork-calamares
 #  - install:
 #      - pkg1
diff --git a/app-misc/calamares-config-kogaion/files/settings.conf b/app-misc/calamares-config-kogaion/files/settings.conf
index 9e485c60..4631ab9c 100644
--- a/app-misc/calamares-config-kogaion/files/settings.conf
+++ b/app-misc/calamares-config-kogaion/files/settings.conf
@@ -3,63 +3,111 @@
 ---
 # Modules can be job modules (with different interfaces) and QtWidgets view modules.
 # They could all be placed in a number of different paths.
-# "local" is LIBDIR/calamares/modules with settings in SHARE/calamares/modules
+# "modules-search" is a list of strings, each of these can either be a full path to a
+# directory or the keyword "local".
+# "local" means LIBDIR/calamares/modules with settings in SHARE/calamares/modules or
+# /etc/calamares/modules.
+# YAML: list of strings.
 modules-search: [ local ]
 
-# We define the module names in the order they should show up (QtWidget view modules,
-# with one or more pages) OR be executed if enqueued (all other modules).
-# Pages can also enqueue jobs for delayed execution in the order specified for the
-# install phase.
+# Instances section. This section is optional, and it defines custom instances for
+# modules of any kind. An instance entry has an instance name, a module name, and
+# a configuration file name.
+# The primary goal of this mechanism is to allow loading multiple instances of the
+# same module, with different configuration. If you don't need this, the instances
+# section can safely be left empty.
+# Module name plus instance name makes an instance key, e.g. "webview@owncloud",
+# where "webview" is the module name (for the webview viewmodule) and "owncloud"
+# is the instance name, which loads a configuration file named "owncloud.conf" from
+# any of the configuration file paths, including the webview module directory.
+# This instance key can then be referenced in the sequence section.
+# For all modules without a custom instance specification, a default instance is
+# generated automatically by Calamares. Therefore a statement such as "webview" in
+# the sequence section automatically implies an instance key of "webview@webview"
+# even without explicitly defining this instance, and the configuration file for
+# this default instance "<modulename>@<modulename>" is always assumed to be
+# "<modulename>.conf".
+# For more information on running module instances, run Calamares in debug mode
+# and check the Modules page in the Debug information interface.
+# YAML: list of maps of string:string key-value pairs.
 
-# Phase 1 - prepare.
-# View modules are shown as UI pages, jobs from job modules are executed immediately in
-# the background.
-# Jobs should be executed sparingly (if at all) in this phase.
-prepare:
-- welcome
-- locale
-- keyboard
-- partition
-- users
-- summary
-
-# Phase 2 - install.
-# View modules are not shown. Only the view modules shown in the previous phase are
-# allowed, their names should be added here as placeholders to specify the order in
-# which view module jobs should be enqueued. Job modules are also allowed.
-install:
-- partition
-- mount
-- unpackfs
-- machineid
-- fstab
-- locale
-- keyboard
-- localecfg
-- users
-#- displaymanager
-- hwclock
-- packages
-- bootloader
-- umount
-
-# Phase 3 - postinstall.
-# View modules are shown as UI pages, jobs from job modules are executed immediately in
-# the background.
-# Jobs should be executed sparingly (if at all) in this phase.
-postinstall:
-- finished
+#instances:
+#- id:       owncloud
+#  module:   webview
+#  config:   owncloud.conf
 
+# Sequence section. This section describes the sequence of modules, both
+# viewmodules and jobmodules, as they should appear and/or run.
+# A jobmodule instance key (or name) can only appear in an exec phase, whereas
+# a viewmodule instance key (or name) can appear in both exec and show phases.
+# There is no limit to the number of show or exec phases. However, the same module
+# instance key should not appear more than once per phase, and deployers should
+# take notice that the global storage structure is persistent throughout the
+# application lifetime, possibly influencing behavior across phases.
+# A show phase defines a sequence of viewmodules (and therefore pages). These
+# viewmodules can offer up jobs for the execution queue.
+# An exec phase displays a progress page (with brandable slideshow). This progress
+# page iterates over the modules listed in the *immediately preceding* show phase,
+# and enqueues their jobs, as well as any other jobs from jobmodules, in the order
+# defined in the current exec phase.
+# It then executes the job queue and clears it. If a viewmodule offers up a job
+# for execution, but the module name (or instance key) isn't listed in the
+# immediately following exec phase, this job will not be executed.
+# WARNING: when upgrading from Calamares 1.1, this section requires manual
+# intervention. There are no fixed prepare/install/postinstall phases any more,
+# and all limitations on the number of phases, number of pages, and number of
+# instances are lifted.
+# YAML: list of lists of strings.
+sequence:
+- show:
+  - welcome
+  - locale
+  - keyboard
+  - partition
+  - users
+  - summary
+- exec:
+  - partition
+  - mount
+  - unpackfs
+  - machineid
+  - fstab
+  - locale
+  - keyboard
+  - localecfg
+  - users
+#  - displaymanager
+  - hwclock
+  - dracut
+  - bootloader
+  - umount
+- show:
+  - finished
 
 # A branding component is a directory, either in SHARE/calamares/branding or in
 # /etc/calamares/branding (the latter takes precedence). The directory must contain a
 # YAML file branding.desc which may reference additional resources (such as images) as
 # paths relative to the current directory.
+# A branding component can also ship a QML slideshow for execution pages, along with
+# translation files.
 # Only the name of the branding component (directory) should be specified here, Calamares
 # then takes care of finding it and loading the contents.
+# YAML: string.
 branding: kogaion_branding
 
-# If this is set to true, Calamares will show an "are you sure?" prompt right before the
-# install phase, i.e. at the point of no return. If it's false, no prompt is shown.
+# If this is set to true, Calamares will show an "Are you sure?" prompt right before
+# each execution phase, i.e. at points of no return. If this is set to false, no prompt
+# is shown.
 # Default is false.
+# YAML: boolean.
 prompt-install: true
+
+# If this is set to true, Calamares will execute all target environment commands in the
+# current environment, without chroot. This setting is considered experimental, and it
+# should only be used when setting up Calamares as a post-install configuration tool, as
+# opposed to a full operating system installer.
+# Some official Calamares modules are not expected to function with this setting.
+# Packagers beware, here be dragons.
+# Default is false.
+# YAML: boolean.
+dont-chroot: false