1 files changed, 186 insertions, 0 deletions
diff --git a/sys-kernel/compat-drivers-alx/compat-drivers-alx-3.8_rc7.ebuild b/sys-kernel/compat-drivers-alx/compat-drivers-alx-3.8_rc7.ebuild
new file mode 100644
index 00000000..e80c50be
--- /dev/null
+++ b/sys-kernel/compat-drivers-alx/compat-drivers-alx-3.8_rc7.ebuild
@@ -0,0 +1,186 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+EAPI="5"
+
+# USE_EXPAND categories
+CPD_USE_EXPAND="wifi ethernet various"
+# These are officially supported
+CPD_USE_EXPAND_wifi="ath5k ath9k ath9k_ap ath9k_htc ath6kl b43 brcmsmac brcmfmac carl9170 rt2x00 wil6210 wl1251 wl12xx zd1211rw"
+# This might work (not officially supported)
+CPD_USE_EXPAND_wifi+=" wl18xx"
+# This might work (added by pentoo)
+CPD_USE_EXPAND_wifi+=" b44"
+
+# These are officially supported
+CPD_USE_EXPAND_ethernet="alx atl1 atl1c atl1e atl2"
+# This might work (not officially supported)
+CPD_USE_EXPAND_ethernet+=" atlxx"
+
+# These are officially supported
+CPD_USE_EXPAND_various="i915"
+# This might work (not officially supported)
+CPD_USE_EXPAND_various+=" bt drm"
+# This might work (added by pentoo)
+CPD_USE_EXPAND_various+=" staging usbnet"
+
+inherit linux-mod linux-info versionator eutils compat-drivers-3.8
+
+# upstream versioning, ex.: 3.7-rc1-6
+UPSTREAM_PVR="${PV//_/-}" && UPSTREAM_PVR="${UPSTREAM_PVR/-p/-}"
+# ex.: 3.7-rc1
+UPSTREAM_PV=${UPSTREAM_PVR%-*}
+
+MY_PN="compat-drivers"
+
+DESCRIPTION="Stable kernel pre-release wifi subsystem backport"
+HOMEPAGE="http://backports.wiki.kernel.org"
+SRC_URI="mirror://kernel/linux/kernel/projects/backports/stable/v${UPSTREAM_PVR}/${MY_PN}-${UPSTREAM_PVR}-1-u.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS=""
+
+IUSE="atheros_obey_crda debugfs debug-driver full-debug injection livecd loadmodules noleds pax_kernel"
+
+DEPEND="!net-wireless/compat-wireless-builder
+	!net-wireless/compat-wireless"
+RDEPEND="${DEPEND}
+	>=sys-kernel/linux-firmware-20110219
+	virtual/udev"
+
+S="${WORKDIR}/${MY_PN}-${UPSTREAM_PVR}-1-u"
+
+RESTRICT="strip"
+
+CONFIG_CHECK="!DYNAMIC_FTRACE"
+
+pkg_setup() {
+	CONFIG_CHECK="~NET_SCHED"
+	CONFIG_CHECK="~IPW2200_PROMISCUOUS"
+	linux-mod_pkg_setup
+	kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat drivers to be installed"
+	kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat drivers you are trying to install contains older modules than your kernel. Failing before downgrading your system."
+
+	#these things are not optional
+	linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !"
+	linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !"
+	linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat"
+
+	if use compat_drivers_wifi_b43; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43"
+	fi
+	if use compat_drivers_wifi_b44; then
+		linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b44"
+	fi
+}
+
+src_prepare() {
+	# use pax_kernel && epatch "${FILESDIR}"/${MY_PN}-3.7_rc1_p6-grsec.patch
+	# use pax_kernel && epatch "${FILESDIR}"/${MY_PN}-3.8-grsec-readonly.patch
+	if use pax_kernel; then
+		for gpatch in "${FILESDIR}"/3.8-grsec/*; do
+			epatch "${gpatch}"
+		done
+	fi
+	# upstream might want to see this
+	use pax_kernel && epatch "${FILESDIR}"/${MY_PN}-3.8-bt_tty.patch
+	# use pax_kernel && epatch "${FILESDIR}"/${MY_PN}-3.7_rc1_p6-grsec-warnings.patch
+
+	#mcgrof said prep for inclusion in compat-wireless.git but this causes issues
+	#find "${S}" -name Makefile | xargs sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' -e 's/CONFIG_COMPAT_CHECK/CONFIG_CHECK/'
+	#sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' "${S}"/config.mk
+
+	# CONFIG_CFG80211_REG_DEBUG=y
+	sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk
+
+	#this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right
+	if use atheros_obey_crda; then
+		ewarn "You have enabled atheros_obey_crda which doesn't do what you think."
+		ewarn "This use flag will cause the eeprom of the card to be ignored and force"
+		ewarn "world roaming on the device until crda provides a valid regdomain."
+		ewarn "Short version, this is not a way to break the law, this will automatically"
+		ewarn "make your card less functional unless you set a proper regdomain with iw/crda."
+		epatch "${FILESDIR}"/ath_regd_optional.patch
+	fi
+
+	if use injection; then
+		epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch
+		epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch
+	#	epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch
+	#	epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch
+		epatch "${FILESDIR}"/ipw2200-inject.3.4.6.patch
+	fi
+	if use noleds; then
+		sed -ir 's/^\(export CONFIG_.*_LEDS=\)y$/\1n/' config.mk
+		epatch "${FILESDIR}/leds-disable-strict-${PV}.patch"
+	fi
+	use debug-driver && sed -i '/DEBUG=y/s/^# *//' "${S}"/config.mk
+	use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk
+	if use full-debug; then
+		if use debug-driver ; then
+			sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk
+		else
+			ewarn "Enabling full-debug includes debug-driver."
+			sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk
+		fi
+	fi
+
+	#avoid annoying ACCESS DENIED sandbox errors
+	sed -i "s/\${MAKE} -C \${KLIB_BUILD} kernelversion/echo ${KV_FULL}/g" compat/scripts/gen-compat-config.sh || die "sed failed"
+	sed -i "s/shell \$(MAKE) -C \$(KLIB_BUILD) kernelversion/echo ${KV_FULL}/g" config.mk || die "sed failed"
+	sed -i "s/make -C \$KLIB_BUILD kernelversion/echo ${KV_FULL}/g" scripts/gen-compat-autoconf.sh || die "sed failed"
+}
+
+src_compile() {
+	addpredict "${KERNEL_DIR}"
+	set_arch_to_kernel
+	emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed"
+}
+
+src_install() {
+	insinto "${DESTDIR}"/lib/modules/"${KV_FULL}"
+	insinto "/lib/modules/${KV_FULL}/updates/drivers/net/ethernet/atheros/alx/"
+	doins "./drivers/net/ethernet/atheros/alx/alx.ko"
+
+	dosbin scripts/athenable scripts/b43load scripts/iwl-enable \
+		scripts/madwifi-unload scripts/athload scripts/iwl-load \
+		scripts/b43enable scripts/unload.sh
+
+	dodir /usr/lib/compat-wireless
+	exeinto /usr/lib/compat-wireless
+	doexe scripts/modlib.sh
+
+	dodoc README.md
+	dodir /$(get_libdir)/udev/rules.d/
+	insinto /$(get_libdir)/udev/rules.d/
+	doins udev/50-compat_firmware.rules
+	exeinto /$(get_libdir)/udev/
+	doexe udev/compat_firmware.sh
+}
+
+pkg_postinst() {
+	update_depmod
+	update_moduledb
+
+	if use !livecd; then
+		if use loadmodules; then
+			einfo "Attempting to unload modules..."
+			/usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!"
+			einfo "Triggering automatic reload of needed modules..."
+			/sbin/udevadm trigger
+			einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup."
+			einfo "If you experience any issues reboot is the simplest course of action."
+		fi
+	fi
+	if use !loadmodules; then
+		einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot."
+		einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the	needed drivers."
+		einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules."
+	fi
+}
+
+pkg_postrm() {
+	remove_moduledb
+}