From 8188c0e028b958ef0f80f861257ac1803bef57e6 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Wed, 22 Mar 2023 13:15:28 +0000 Subject: sys-apps/baselayout : version bump --- metadata/md5-cache/sys-apps/baselayout-2.13-r2 | 15 + metadata/md5-cache/sys-apps/baselayout-2.8-r2 | 14 - metadata/md5-cache/sys-apps/baselayout-2.8-r3 | 14 + metadata/pkg_desc_index | 2 +- sys-apps/baselayout/Manifest | 1 + sys-apps/baselayout/baselayout-2.13-r2.ebuild | 434 +++++++++++++++++++++ sys-apps/baselayout/baselayout-2.8-r2.ebuild | 372 ------------------ sys-apps/baselayout/baselayout-2.8-r3.ebuild | 372 ++++++++++++++++++ .../baselayout/files/baselayout-2.13-redcore.patch | 39 ++ .../baselayout/files/baselayout-2.8-redcore.patch | 39 ++ sys-apps/baselayout/files/baselayout-redcore.patch | 39 -- 11 files changed, 915 insertions(+), 426 deletions(-) create mode 100644 metadata/md5-cache/sys-apps/baselayout-2.13-r2 delete mode 100644 metadata/md5-cache/sys-apps/baselayout-2.8-r2 create mode 100644 metadata/md5-cache/sys-apps/baselayout-2.8-r3 create mode 100644 sys-apps/baselayout/baselayout-2.13-r2.ebuild delete mode 100644 sys-apps/baselayout/baselayout-2.8-r2.ebuild create mode 100644 sys-apps/baselayout/baselayout-2.8-r3.ebuild create mode 100644 sys-apps/baselayout/files/baselayout-2.13-redcore.patch create mode 100644 sys-apps/baselayout/files/baselayout-2.8-redcore.patch delete mode 100644 sys-apps/baselayout/files/baselayout-redcore.patch diff --git a/metadata/md5-cache/sys-apps/baselayout-2.13-r2 b/metadata/md5-cache/sys-apps/baselayout-2.13-r2 new file mode 100644 index 00000000..46e0742d --- /dev/null +++ b/metadata/md5-cache/sys-apps/baselayout-2.13-r2 @@ -0,0 +1,15 @@ +BDEPEND=virtual/pkgconfig +DEFINED_PHASES=install postinst postrm preinst prepare setup +DEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg +DESCRIPTION=Filesystem baselayout and init scripts +EAPI=7 +HOMEPAGE=https://wiki.gentoo.org/wiki/No_homepage +INHERIT=multilib prefix udev +IUSE=build +split-usr +KEYWORDS=~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris ~x86-winnt +LICENSE=GPL-2 +RDEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg !sys-apps/baselayout-prefix +SLOT=0 +SRC_URI=https://gitweb.gentoo.org/proj/baselayout.git/snapshot/baselayout-2.13.tar.bz2 +_eclasses_=multilib 5ca4e49abed8e3a2f7b56920eadee157 prefix eab3c99d77fe00506c109c8a736186f7 toolchain-funcs 6001248ef162a5fa2a21ce132a212f6b udev eec0bbab06977f1cfc5597269c1fa152 +_md5_=060bcba3f42c5372cfa15a436ee57f6f diff --git a/metadata/md5-cache/sys-apps/baselayout-2.8-r2 b/metadata/md5-cache/sys-apps/baselayout-2.8-r2 deleted file mode 100644 index 09e93bcc..00000000 --- a/metadata/md5-cache/sys-apps/baselayout-2.8-r2 +++ /dev/null @@ -1,14 +0,0 @@ -DEFINED_PHASES=install postinst postrm preinst prepare setup -DEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg virtual/pkgconfig -DESCRIPTION=Filesystem baselayout and init scripts -EAPI=6 -HOMEPAGE=https://wiki.gentoo.org/wiki/No_homepage -INHERIT=multilib versionator prefix udev -IUSE=build kernel_FreeBSD kernel_linux +split-usr -KEYWORDS=~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 -LICENSE=GPL-2 -RDEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg -SLOT=0 -SRC_URI=https://gitweb.gentoo.org/proj/baselayout.git/snapshot/baselayout-2.8.tar.bz2 -_eclasses_=estack 055c42df72f76a4f45ec92b35e83cd56 multilib 5ca4e49abed8e3a2f7b56920eadee157 prefix eab3c99d77fe00506c109c8a736186f7 toolchain-funcs 6001248ef162a5fa2a21ce132a212f6b udev eec0bbab06977f1cfc5597269c1fa152 versionator d3fb3ba33acc3bbbdc4d7970227c100d -_md5_=5768702500bc5a261f30831462945e2f diff --git a/metadata/md5-cache/sys-apps/baselayout-2.8-r3 b/metadata/md5-cache/sys-apps/baselayout-2.8-r3 new file mode 100644 index 00000000..9228639f --- /dev/null +++ b/metadata/md5-cache/sys-apps/baselayout-2.8-r3 @@ -0,0 +1,14 @@ +DEFINED_PHASES=install postinst postrm preinst prepare setup +DEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg virtual/pkgconfig +DESCRIPTION=Filesystem baselayout and init scripts +EAPI=6 +HOMEPAGE=https://wiki.gentoo.org/wiki/No_homepage +INHERIT=multilib versionator prefix udev +IUSE=build kernel_FreeBSD kernel_linux +split-usr +KEYWORDS=~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 +LICENSE=GPL-2 +RDEPEND=acct-group/smbshare !net-fs/sambacfg !sys-boot/grubcfg !sys-kernel/dracutcfg +SLOT=0 +SRC_URI=https://gitweb.gentoo.org/proj/baselayout.git/snapshot/baselayout-2.8.tar.bz2 +_eclasses_=estack 055c42df72f76a4f45ec92b35e83cd56 multilib 5ca4e49abed8e3a2f7b56920eadee157 prefix eab3c99d77fe00506c109c8a736186f7 toolchain-funcs 6001248ef162a5fa2a21ce132a212f6b udev eec0bbab06977f1cfc5597269c1fa152 versionator d3fb3ba33acc3bbbdc4d7970227c100d +_md5_=135464cb102737c1577b53b2be0d4e42 diff --git a/metadata/pkg_desc_index b/metadata/pkg_desc_index index 61579709..f71db7cb 100644 --- a/metadata/pkg_desc_index +++ b/metadata/pkg_desc_index @@ -38,7 +38,7 @@ media-video/guvcview 2.0.6-r10: Simple Qt5 or GTK+3 interface for capturing and net-misc/warpinator 1.4.5: Share files across the LAN net-print/lexmark-upd-ppd 1.0.0.20210304-r1: Lexmark universal printer driver PPDs net-wireless/broadcom-sta 6.30.223.271-r4: Broadcom's IEEE 802.11a/b/g/n hybrid Linux device driver -sys-apps/baselayout 2.8-r2: Filesystem baselayout and init scripts +sys-apps/baselayout 2.8-r3 2.13-r2: Filesystem baselayout and init scripts sys-apps/firetools 0.9.64: Graphical user interface of app-emulation/firejail sys-apps/lsb-release 3.2-r1: LSB version query program sys-apps/openrc 0.46-r1: OpenRC manages the services, startup and shutdown of a host diff --git a/sys-apps/baselayout/Manifest b/sys-apps/baselayout/Manifest index c8541b79..f25272d9 100644 --- a/sys-apps/baselayout/Manifest +++ b/sys-apps/baselayout/Manifest @@ -1 +1,2 @@ +DIST baselayout-2.13.tar.bz2 29423 BLAKE2B a399e515297d3a936c5821205f1f0d6de844580099936be50e80a463b9fa6239aead52b7b371136680e263e326f7e6a1faea8cd8db0f11462cf0e8166707fc91 SHA512 ff16f20cf2c65258ab6d48c403607113f84fc57ffee6650652202746095f402f8c6a4f22040d0bb9310180945131bed6a0fda3717b39080a987e4f5224339095 DIST baselayout-2.8.tar.bz2 30236 BLAKE2B 0bac62dd5585f1f550da8c99d06a7f8ab6cdd473b0499a8f0ac58a5c43e3883b42adb7f80c172d894fae93a6ddb6fec7a65cad9897f4a2532b481c82065ed96b SHA512 506d7cc8399b530eabc9ba2d16cbb6c024350f9487a2a9168c670cee9876f62e5a716942f698c4883013d6ccc9591c2d7fc2ac9d782f0ce8d724371ca94c739a diff --git a/sys-apps/baselayout/baselayout-2.13-r2.ebuild b/sys-apps/baselayout/baselayout-2.13-r2.ebuild new file mode 100644 index 00000000..11534b02 --- /dev/null +++ b/sys-apps/baselayout/baselayout-2.13-r2.ebuild @@ -0,0 +1,434 @@ +# Copyright 1999-2023 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=7 + +inherit multilib prefix udev + +DESCRIPTION="Filesystem baselayout and init scripts" +HOMEPAGE="https://wiki.gentoo.org/wiki/No_homepage" +if [[ ${PV} = 9999 ]]; then + EGIT_REPO_URI="https://anongit.gentoo.org/git/proj/${PN}.git" + inherit git-r3 +else + SRC_URI="https://gitweb.gentoo.org/proj/${PN}.git/snapshot/${P}.tar.bz2" + KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris ~x86-winnt" +fi + +LICENSE="GPL-2" +SLOT="0" +IUSE="build +split-usr" + +DEPEND="acct-group/smbshare + !net-fs/sambacfg + !sys-boot/grubcfg + !sys-kernel/dracutcfg" +RDEPEND="${DEPEND} + !sys-apps/baselayout-prefix" + +pkg_setup() { + multilib_layout +} + +riscv_compat_symlink() { + # Here we apply some special sauce for riscv. + # Two multilib layouts exist for now: + # 1) one level libdirs, (32bit) "lib" and (64bit) "lib64" + # these are chosen by us to closely resemble other arches + # 2) two level libdirs, "lib64/lp64d" "lib64/lp64" "lib32/ilp32d" ... + # this is the glibc/gcc default + # Unfortunately, the default has only one fallback, which is "lib" + # for both 32bit and 64bit. So things do not break in 1), we need + # to provide compatibility symlinks... + + # This function has exactly two parameters: + # - the default libdir, to determine if 1) or 2) applies + # - the location of the symlink (which points to ".") + + # Note: we call this only in the ${SYMLINK_LIB} = no codepath, since + # there never was a ${SYMLINK_LIB} = yes riscv profile. + + case ${CHOST} in + riscv*) + # are we on a one level libdir profile? is there no symlink yet? + if [[ ${1} != */* && ! -L ${2} ]] ; then + ln -s . $2 || die "Unable to make $2 riscv compatibility symlink" + fi + ;; + esac +} + +# Create our multilib dirs - the Makefile has no knowledge of this +multilib_layout() { + local dir def_libdir libdir libdirs + local prefix prefix_lst + def_libdir=$(get_abi_LIBDIR $DEFAULT_ABI) + libdirs=$(get_all_libdirs) + + if [[ -z "${SYMLINK_LIB}" || ${SYMLINK_LIB} = no ]] ; then + prefix_lst=( "${EROOT}"/{,usr/,usr/local/} ) + for prefix in "${prefix_lst[@]}"; do + for libdir in ${libdirs}; do + dir="${prefix}${libdir}" + if [[ -e "${dir}" ]]; then + [[ ! -d "${dir}" ]] && + die "${dir} exists but is not a directory" + continue + fi + if ! use split-usr && [[ ${prefix} = ${EROOT}/ ]]; then + libdir="${libdir%%/*}" + dir="${prefix}${libdir}" + einfo "symlinking ${dir} to usr/${libdir}" + ln -s usr/${libdir} ${dir} || + die "Unable to make ${dir} symlink" + else + einfo "creating directory ${dir}" + mkdir -p "${dir}" || + die "Unable to create ${dir} directory" + fi + done + [[ -d "${prefix}${def_libdir}" ]] && riscv_compat_symlink "${def_libdir}" "${prefix}${def_libdir}/${DEFAULT_ABI}" + done + return 0 + fi + + [ -z "${def_libdir}" ] && + die "your DEFAULT_ABI=$DEFAULT_ABI appears to be invalid" + + # figure out which paths should be symlinks and which should be directories + local dirs syms exp d + for libdir in ${libdirs} ; do + if use split-usr ; then + exp=( {,usr/,usr/local/}${libdir} ) + else + exp=( {usr/,usr/local/}${libdir} ) + fi + for d in "${exp[@]}" ; do + # most things should be dirs + if [ "${SYMLINK_LIB}" = "yes" ] && [ "${libdir}" = "lib" ] ; then + [ ! -h "${d}" ] && [ -e "${d}" ] && dirs+=" ${d}" + else + [ -h "${d}" ] && syms+=" ${d}" + fi + done + done + if [ -n "${syms}${dirs}" ] ; then + ewarn "Your system profile has SYMLINK_LIB=${SYMLINK_LIB:-no}, so that means you need to" + ewarn "have these paths configured as follows:" + [ -n "${dirs}" ] && ewarn "symlinks to '${def_libdir}':${dirs}" + [ -n "${syms}" ] && ewarn "directories:${syms}" + ewarn "The ebuild will attempt to fix these, but only for trivial conversions." + ewarn "If things fail, you will need to manually create/move the directories." + echo + fi + + # setup symlinks and dirs where we expect them to be; do not migrate + # data ... just fall over in that case. + if use split-usr ; then + prefix_lst=( "${EROOT}"/{,usr/,usr/local/} ) + else + prefix_lst=( "${EROOT}"/{usr/,usr/local/} ) + fi + for prefix in "${prefix_lst[@]}"; do + if [ "${SYMLINK_LIB}" = yes ] ; then + # we need to make sure "lib" points to the native libdir + if [ -h "${prefix}lib" ] ; then + # it's already a symlink! assume it's pointing to right place ... + continue + elif [ -d "${prefix}lib" ] ; then + # "lib" is a dir, so need to convert to a symlink + ewarn "Converting ${prefix}lib from a dir to a symlink" + rm -f "${prefix}lib"/.keep || die + if rmdir "${prefix}lib" 2>/dev/null ; then + ln -s ${def_libdir} "${prefix}lib" || die + else + die "non-empty dir found where we needed a symlink: ${prefix}lib" + fi + else + # nothing exists, so just set it up sanely + ewarn "Initializing ${prefix}lib as a symlink" + mkdir -p "${prefix}" || die + rm -f "${prefix}lib" || die + ln -s ${def_libdir} "${prefix}lib" || die + mkdir -p "${prefix}${def_libdir}" || die #423571 + fi + else + # we need to make sure "lib" is a dir + if [ -h "${prefix}lib" ] ; then + # "lib" is a symlink, so need to convert to a dir + ewarn "Converting ${prefix}lib from a symlink to a dir" + rm -f "${prefix}lib" || die + if [ -d "${prefix}lib32" ] ; then + ewarn "Migrating ${prefix}lib32 to ${prefix}lib" + mv "${prefix}lib32" "${prefix}lib" || die + else + mkdir -p "${prefix}lib" || die + fi + elif [ -d "${prefix}lib" ] && ! has lib32 ${libdirs} ; then + # make sure the old "lib" ABI location does not exist; we + # only symlinked the lib dir on systems where we moved it + # to "lib32" ... + case ${CHOST} in + i?86*|x86_64*|powerpc*|sparc*|s390*) + if [[ -d ${prefix}lib32 && ! -h ${prefix}lib32 ]] ; then + rm -f "${prefix}lib32"/.keep || die + if ! rmdir "${prefix}lib32" 2>/dev/null ; then + ewarn "You need to merge ${prefix}lib32 into ${prefix}lib" + die "non-empty dir found where there should be none: ${prefix}lib32" + fi + fi + ;; + esac + else + # nothing exists, so just set it up sanely + ewarn "Initializing ${prefix}lib as a dir" + mkdir -p "${prefix}lib" || die + fi + fi + done + if ! use split-usr ; then + for libdir in ${libdirs}; do + if [[ ! -e "${EROOT}${libdir}" ]]; then + ln -s usr/"${libdir}" "${EROOT}${libdir}" || + die "Unable to make ${EROOT}${libdir} symlink" + fi + done + fi +} + +pkg_preinst() { + # We need to install directories and maybe some dev nodes when building + # stages, but they cannot be in CONTENTS. + # Also, we cannot reference $S as binpkg will break so we do this. + multilib_layout + if use build ; then + if use split-usr ; then + emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout + else + emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout-usrmerge + fi + fi + rm -f "${ED}"/usr/share/${PN}/Makefile || die + + # Create symlinks in pkg_preinst to avoid Portage collision check. + # Create the symlinks in ${ED} via dosym so that we own it. + # Only create the symlinks if it wont cause a conflict in ${EROOT}. + if [[ -L ${EROOT}/var/lock || ! -e ${EROOT}/var/lock ]]; then + dosym ../run/lock /var/lock + fi + if [[ -L ${EROOT}/var/run || ! -e ${EROOT}/var/run ]]; then + dosym ../run /var/run + fi +} + +src_prepare() { + default + eapply "${FILESDIR}"/"${P}"-redcore.patch + + # don't want symlinked directories in PATH on systems with usr-merge + if ! use split-usr && ! use prefix-guest; then + sed \ + -e 's|:/usr/sbin:|:|g' \ + -e 's|:/sbin:|:|g' \ + -e 's|:/bin:|:|g' \ + -i etc/env.d/50baselayout || die + fi + + if use prefix; then + hprefixify -e "/EUID/s,0,${EUID}," -q '"' etc/profile + hprefixify etc/shells share/passwd + hprefixify -w '/PATH=/' etc/env.d/50baselayout + hprefixify -w 1 etc/env.d/50baselayout + echo PATH=/usr/sbin:/sbin:/usr/bin:/bin >> etc/env.d/99host + + # change branding + sed -i \ + -e '/gentoo-release/s/Gentoo Base/Gentoo Prefix Base/' \ + -e '/make_os_release/s/${OS}/Prefix/' \ + Makefile || die + fi + + # handle multilib paths. do it here because we want this behavior + # regardless of the C library that you're using. we do explicitly + # list paths which the native ldconfig searches, but this isn't + # problematic as it doesn't change the resulting ld.so.cache or + # take longer to generate. similarly, listing both the native + # path and the symlinked path doesn't change the resulting cache. + local libdir ldpaths + for libdir in $(get_all_libdirs) ; do + if use split-usr || use prefix-guest; then + ldpaths+=":${EPREFIX}/${libdir}" + fi + ldpaths+=":${EPREFIX}/usr/${libdir}" + ldpaths+=":${EPREFIX}/usr/local/${libdir}" + done + echo "LDPATH='${ldpaths#:}'" >> etc/env.d/50baselayout +} + +src_install() { + emake \ + DESTDIR="${ED}" \ + install + + if [[ ${CHOST} == *-darwin* ]] ; then + # add SDK path which contains development manpages + echo "MANPATH=${EPREFIX}/MacOSX.sdk/usr/share/man" \ + > "${ED}"/etc/env.d/98macos-sdk + fi + + # need the makefile in pkg_preinst + insinto /usr/share/${PN} + doins Makefile + + dodoc ChangeLog + + # bug 858596 + if use prefix-guest ; then + dodir sbin + cat > "${ED}"/sbin/runscript <<- EOF + #!/usr/bin/env sh + source "${EPREFIX}/lib/gentoo/functions.sh" + + eerror "runscript/openrc-run not supported by Gentoo Prefix Base System release ${PV}" 1>&2 + exit 1 + EOF + chmod 755 "${ED}"/sbin/runscript || die + cp "${ED}"/sbin/{runscript,openrc-run} || die + fi + + ############### Redcore Linux ############### + # + # issue.logo + rm "${ED}"/etc/issue.logo + # + # NetworkManager + dodir /etc/NetworkManager + insinto /etc/NetworkManager + newins "${FILESDIR}"/nmcfg NetworkManager.conf + # + # dracut + dodir /etc/dracut.conf.d + insinto /etc/dracut.conf.d + newins "${FILESDIR}"/dracutcfg dracut-redcore.conf + # + # grub + dodir /etc/default + insinto /etc/default + newins "${FILESDIR}"/grubcfg grub + # + # samba + dodir /etc/samba + insinto /etc/samba + newins "${FILESDIR}"/smbcfg smb.conf + keepdir var/lib/samba/usershare + # cryptsetup + dodir /etc/conf.d + insinto /etc/conf.d + newins ${FILESDIR}/dmcryptcfg dmcrypt + # + # esync + dodir /etc/security/limits.d + insinto /etc/security/limits.d + newins ${FILESDIR}/esynccfg 50-esync.conf + # + # IOsched + dodir /lib/udev/rules.d/ + insinto /lib/udev/rules.d + newins ${FILESDIR}/ioschedcfg 60-iosched.rules + # + ############################################## +} + +pkg_postinst() { + local x + + # We installed some files to /usr/share/baselayout instead of /etc to stop + # (1) overwriting the user's settings + # (2) screwing things up when attempting to merge files + # (3) accidentally packaging up personal files with quickpkg + # If they don't exist then we install them + for x in master.passwd passwd shadow group fstab ; do + [ -e "${EROOT}/etc/${x}" ] && continue + [ -e "${EROOT}/usr/share/baselayout/${x}" ] || continue + cp -p "${EROOT}/usr/share/baselayout/${x}" "${EROOT}"/etc || die + done + + # Force shadow permissions to not be world-readable #260993 + for x in shadow ; do + if [ -e "${EROOT}/etc/${x}" ] ; then + chmod o-rwx "${EROOT}/etc/${x}" || die + fi + done + # whine about users that lack passwords #193541 + if [[ -e "${EROOT}"/etc/shadow ]] ; then + local bad_users=$(sed -n '/^[^:]*::/s|^\([^:]*\)::.*|\1|p' "${EROOT}"/etc/shadow) + if [[ -n ${bad_users} ]] ; then + echo + ewarn "The following users lack passwords!" + ewarn ${bad_users} + fi + fi + + # whine about users with invalid shells #215698 + if [[ -e "${EROOT}"/etc/passwd ]] ; then + local bad_shells=$(awk -F: 'system("test -e ${ROOT}" $7) { print $1 " - " $7}' "${EROOT}"/etc/passwd | sort) + if [[ -n ${bad_shells} ]] ; then + echo + ewarn "The following users have non-existent shells!" + ewarn "${bad_shells}" + fi + fi + + # https://bugs.gentoo.org/361349 + if use kernel_linux; then + mkdir -p "${EROOT}"/run || die + + local found fstype mountpoint + while read -r _ mountpoint fstype _; do + [[ ${mountpoint} = /run ]] && [[ ${fstype} = tmpfs ]] && found=1 + done < "${ROOT}"/proc/mounts + [[ -z ${found} ]] && + ewarn "You should reboot now to get /run mounted with tmpfs!" + fi + + for x in ${REPLACING_VERSIONS}; do + if ver_test 2.4 -lt ${x}; then + ewarn "After updating ${EROOT}/etc/profile, please run" + ewarn "env-update && . /etc/profile" + fi + + if ver_test 2.6 -lt ${x}; then + ewarn "Please run env-update then log out and back in to" + ewarn "update your path." + fi + # clean up after 2.5 typos + # https://bugs.gentoo.org/show_bug.cgi?id=656380 + if [[ ${x} == 2.5 ]]; then + rm -fr "${EROOT}/{,usr" || die + fi + done + + if [[ -e "${EROOT}"/etc/env.d/00basic ]]; then + ewarn "${EROOT}/etc/env.d/00basic is now ${EROOT}/etc/env.d/50baselayout" + ewarn "Please migrate your changes." + fi + + + ############### Redcore Linux ############### + rm -rf "${EROOT}"etc/dracut.conf.d/._cfg????_dracut-redcore.conf + rm -rf "${EROOT}"etc/default/._cfg????_grub + rm -rf "${EROOT}"etc/samba/._cfg????_smb.conf + rm -rf "${EROOT}"etc/conf.d/._cfg???_dmcrypt + rm -rf "${EROOT}"etc/security/limits.d/._cfg???_50-esync.conf + rm -rf "${EROOT}"lib/udev/rules.d/._cfg???_60-iosched.rules + chown root:smbshare /var/lib/samba/usershare + chmod 1770 /var/lib/samba/usershare + udev_reload + ############################################ +} + +pkg_postrm() { + ############### Redcore Linux ############### + udev_reload + ############################################ +} diff --git a/sys-apps/baselayout/baselayout-2.8-r2.ebuild b/sys-apps/baselayout/baselayout-2.8-r2.ebuild deleted file mode 100644 index 8a46a9fb..00000000 --- a/sys-apps/baselayout/baselayout-2.8-r2.ebuild +++ /dev/null @@ -1,372 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 - -inherit multilib versionator prefix udev - -DESCRIPTION="Filesystem baselayout and init scripts" -HOMEPAGE="https://wiki.gentoo.org/wiki/No_homepage" -if [[ ${PV} = 9999 ]]; then - EGIT_REPO_URI="https://anongit.gentoo.org/git/proj/${PN}.git" - inherit git-r3 -else - SRC_URI="https://gitweb.gentoo.org/proj/${PN}.git/snapshot/${P}.tar.bz2" - KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86" -fi - -LICENSE="GPL-2" -SLOT="0" -IUSE="build kernel_FreeBSD kernel_linux +split-usr" - -DEPEND="acct-group/smbshare - !net-fs/sambacfg - !sys-boot/grubcfg - !sys-kernel/dracutcfg" -RDEPEND="${DEPEND}" - -pkg_setup() { - multilib_layout -} - -# Create our multilib dirs - the Makefile has no knowledge of this -multilib_layout() { - local dir def_libdir libdir libdirs - local prefix prefix_lst - def_libdir=$(get_abi_LIBDIR $DEFAULT_ABI) - libdirs=$(get_all_libdirs) - : ${libdirs:=lib} # it isn't that we don't trust multilib.eclass... - - if [[ -z "${SYMLINK_LIB}" || ${SYMLINK_LIB} = no ]] ; then - prefix_lst=( "${EROOT}"{,usr/,usr/local/} ) - for prefix in "${prefix_lst[@]}"; do - for libdir in ${libdirs}; do - dir="${prefix}${libdir}" - if [[ -e "${dir}" ]]; then - [[ ! -d "${dir}" ]] && - die "${dir} exists but is not a directory" - continue - fi - if ! use split-usr && [[ ${prefix} = ${EROOT} ]]; then - einfo "symlinking ${dir} to usr/${libdir}" - ln -s usr/${libdir} ${dir} || - die " Unable to make ${dir} symlink" - else - einfo "creating directory ${dir}" - mkdir -p "${dir}" || - die "Unable to create ${dir} directory" - fi - done - done - return 0 - fi - - [ -z "${def_libdir}" ] && - die "your DEFAULT_ABI=$DEFAULT_ABI appears to be invalid" - - # figure out which paths should be symlinks and which should be directories - local dirs syms exp d - for libdir in ${libdirs} ; do - if use split-usr ; then - exp=( {,usr/,usr/local/}${libdir} ) - else - exp=( {usr/,usr/local/}${libdir} ) - fi - for d in "${exp[@]}" ; do - # most things should be dirs - if [ "${SYMLINK_LIB}" = "yes" ] && [ "${libdir}" = "lib" ] ; then - [ ! -h "${d}" ] && [ -e "${d}" ] && dirs+=" ${d}" - else - [ -h "${d}" ] && syms+=" ${d}" - fi - done - done - if [ -n "${syms}${dirs}" ] ; then - ewarn "Your system profile has SYMLINK_LIB=${SYMLINK_LIB:-no}, so that means you need to" - ewarn "have these paths configured as follows:" - [ -n "${dirs}" ] && ewarn "symlinks to '${def_libdir}':${dirs}" - [ -n "${syms}" ] && ewarn "directories:${syms}" - ewarn "The ebuild will attempt to fix these, but only for trivial conversions." - ewarn "If things fail, you will need to manually create/move the directories." - echo - fi - - # setup symlinks and dirs where we expect them to be; do not migrate - # data ... just fall over in that case. - if use split-usr ; then - prefix_lst=( "${EROOT}"{,usr/,usr/local/} ) - else - prefix_lst=( "${EROOT}"{usr/,usr/local/} ) - fi - for prefix in "${prefix_lst[@]}"; do - if [ "${SYMLINK_LIB}" = yes ] ; then - # we need to make sure "lib" points to the native libdir - if [ -h "${prefix}lib" ] ; then - # it's already a symlink! assume it's pointing to right place ... - continue - elif [ -d "${prefix}lib" ] ; then - # "lib" is a dir, so need to convert to a symlink - ewarn "Converting ${prefix}lib from a dir to a symlink" - rm -f "${prefix}lib"/.keep || die - if rmdir "${prefix}lib" 2>/dev/null ; then - ln -s ${def_libdir} "${prefix}lib" || die - else - die "non-empty dir found where we needed a symlink: ${prefix}lib" - fi - else - # nothing exists, so just set it up sanely - ewarn "Initializing ${prefix}lib as a symlink" - mkdir -p "${prefix}" || die - rm -f "${prefix}lib" || die - ln -s ${def_libdir} "${prefix}lib" || die - mkdir -p "${prefix}${def_libdir}" || die #423571 - fi - else - # we need to make sure "lib" is a dir - if [ -h "${prefix}lib" ] ; then - # "lib" is a symlink, so need to convert to a dir - ewarn "Converting ${prefix}lib from a symlink to a dir" - rm -f "${prefix}lib" || die - if [ -d "${prefix}lib32" ] ; then - ewarn "Migrating ${prefix}lib32 to ${prefix}lib" - mv "${prefix}lib32" "${prefix}lib" || die - else - mkdir -p "${prefix}lib" || die - fi - elif [ -d "${prefix}lib" ] && ! has lib32 ${libdirs} ; then - # make sure the old "lib" ABI location does not exist; we - # only symlinked the lib dir on systems where we moved it - # to "lib32" ... - case ${CHOST} in - *-gentoo-freebsd*) ;; # We want it the other way on fbsd. - i?86*|x86_64*|powerpc*|sparc*|s390*) - if [[ -d ${prefix}lib32 && ! -h ${prefix}lib32 ]] ; then - rm -f "${prefix}lib32"/.keep || die - if ! rmdir "${prefix}lib32" 2>/dev/null ; then - ewarn "You need to merge ${prefix}lib32 into ${prefix}lib" - die "non-empty dir found where there should be none: ${prefix}lib32" - fi - fi - ;; - esac - else - # nothing exists, so just set it up sanely - ewarn "Initializing ${prefix}lib as a dir" - mkdir -p "${prefix}lib" || die - fi - fi - done - if ! use split-usr ; then - for libdir in ${libdirs}; do - if [[ ! -e "${EROOT}${libdir}" ]]; then - ln -s usr/"${libdir}" "${EROOT}${libdir}" || - die " Unable to make ${EROOT}${libdir} symlink" - fi - done - fi -} - -pkg_preinst() { - # This is written in src_install (so it's in CONTENTS), but punt all - # pending updates to avoid user having to do etc-update (and make the - # pkg_postinst logic simpler). - rm -f "${EROOT}"/etc/._cfg????_gentoo-release || die - - # We need to install directories and maybe some dev nodes when building - # stages, but they cannot be in CONTENTS. - # Also, we cannot reference $S as binpkg will break so we do this. - multilib_layout - if use build ; then - if use split-usr ; then - emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout - else - emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout-usrmerge - fi - fi - rm -f "${ED}"/usr/share/${PN}/Makefile || die -} - -src_prepare() { - default - eapply "${FILESDIR}"/"${PN}"-redcore.patch - if use prefix; then - hprefixify -e "/EUID/s,0,${EUID}," -q '"' etc/profile - hprefixify etc/{env.d/50baselayout,shells} share.Linux/passwd - echo PATH=/usr/sbin:/sbin:/usr/bin:/bin >> etc/env.d/99host - fi - - # don't want symlinked directories in PATH on systems with usr-merge - if ! use split-usr; then - sed \ - -e 's|/usr/local/sbin:||g' \ - -e 's|:/usr/sbin:|:|g' \ - -e 's|:/sbin:|:|g' \ - -e 's|:/bin:|:|g' \ - -i etc/env.d/50baselayout || die - fi - - # handle multilib paths. do it here because we want this behavior - # regardless of the C library that you're using. we do explicitly - # list paths which the native ldconfig searches, but this isn't - # problematic as it doesn't change the resulting ld.so.cache or - # take longer to generate. similarly, listing both the native - # path and the symlinked path doesn't change the resulting cache. - local libdir ldpaths - for libdir in $(get_all_libdirs) ; do - use split-usr && ldpaths+=":${EPREFIX}/${libdir}" - ldpaths+=":${EPREFIX}/usr/${libdir}" - ldpaths+=":${EPREFIX}/usr/local/${libdir}" - done - echo "LDPATH='${ldpaths#:}'" >> etc/env.d/50baselayout - - # rc-scripts version for testing of features that *should* be present - echo "Redcore Linux Hardened - rolling" > etc/redcore-release -} - -src_install() { - emake \ - OS=$(usex kernel_FreeBSD BSD Linux) \ - DESTDIR="${ED}" \ - install - - # need the makefile in pkg_preinst - insinto /usr/share/${PN} - doins Makefile - dodoc ChangeLog - - ############### Redcore Linux ############### - # - # issue.logo - rm "${ED}"/etc/issue.logo - # - # NetworkManager - dodir /etc/NetworkManager - insinto /etc/NetworkManager - newins "${FILESDIR}"/nmcfg NetworkManager.conf - # - # dracut - dodir /etc/dracut.conf.d - insinto /etc/dracut.conf.d - newins "${FILESDIR}"/dracutcfg dracut-redcore.conf - # - # grub - dodir /etc/default - insinto /etc/default - newins "${FILESDIR}"/grubcfg grub - # - # samba - dodir /etc/samba - insinto /etc/samba - newins "${FILESDIR}"/smbcfg smb.conf - keepdir var/lib/samba/usershare - # cryptsetup - dodir /etc/conf.d - insinto /etc/conf.d - newins ${FILESDIR}/dmcryptcfg dmcrypt - # - # esync - dodir /etc/security/limits.d - insinto /etc/security/limits.d - newins ${FILESDIR}/esynccfg 50-esync.conf - # - # IOsched - dodir /lib/udev/rules.d/ - insinto /lib/udev/rules.d - newins ${FILESDIR}/ioschedcfg 60-iosched.rules - # - ############################################## -} - -pkg_postinst() { - local x - - # We installed some files to /usr/share/baselayout instead of /etc to stop - # (1) overwriting the user's settings - # (2) screwing things up when attempting to merge files - # (3) accidentally packaging up personal files with quickpkg - # If they don't exist then we install them - for x in master.passwd passwd shadow group fstab ; do - [ -e "${EROOT}etc/${x}" ] && continue - [ -e "${EROOT}usr/share/baselayout/${x}" ] || continue - cp -p "${EROOT}usr/share/baselayout/${x}" "${EROOT}"etc || die - done - - # Force shadow permissions to not be world-readable #260993 - for x in shadow ; do - if [ -e "${EROOT}etc/${x}" ] ; then - chmod o-rwx "${EROOT}etc/${x}" || die - fi - done - - # whine about users that lack passwords #193541 - if [[ -e "${EROOT}"etc/shadow ]] ; then - local bad_users=$(sed -n '/^[^:]*::/s|^\([^:]*\)::.*|\1|p' "${EROOT}"/etc/shadow) - if [[ -n ${bad_users} ]] ; then - echo - ewarn "The following users lack passwords!" - ewarn ${bad_users} - fi - fi - - # whine about users with invalid shells #215698 - if [[ -e "${EROOT}"etc/passwd ]] ; then - local bad_shells=$(awk -F: 'system("test -e " $7) { print $1 " - " $7}' "${EROOT}"etc/passwd | sort) - if [[ -n ${bad_shells} ]] ; then - echo - ewarn "The following users have non-existent shells!" - ewarn "${bad_shells}" - fi - fi - - # https://bugs.gentoo.org/361349 - if use kernel_linux; then - mkdir -p "${EROOT}"run || die - - local found fstype mountpoint - while read -r _ mountpoint fstype _; do - [[ ${mountpoint} = /run ]] && [[ ${fstype} = tmpfs ]] && found=1 - done < "${ROOT}"proc/mounts - [[ -z ${found} ]] && - ewarn "You should reboot now to get /run mounted with tmpfs!" - fi - - for x in ${REPLACING_VERSIONS}; do - if ! version_is_at_least 2.4 ${x}; then - ewarn "After updating ${EROOT}etc/profile, please run" - ewarn "env-update && . /etc/profile" - fi - - if ! version_is_at_least 2.6 ${x}; then - ewarn "Please run env-update then log out and back in to" - ewarn "update your path." - fi - # clean up after 2.5 typos - # https://bugs.gentoo.org/show_bug.cgi?id=656380 - if [[ ${x} == 2.5 ]]; then - rm -fr "${EROOT}{,usr" || die - fi - done - - if [[ -e "${EROOT}"etc/env.d/00basic ]]; then - ewarn "${EROOT}etc/env.d/00basic is now ${EROOT}etc/env.d/50baselayout" - ewarn "Please migrate your changes." - fi - - ############### Redcore Linux ############### - rm -rf "${EROOT}"etc/dracut.conf.d/._cfg????_dracut-redcore.conf - rm -rf "${EROOT}"etc/default/._cfg????_grub - rm -rf "${EROOT}"etc/samba/._cfg????_smb.conf - rm -rf "${EROOT}"etc/conf.d/._cfg???_dmcrypt - rm -rf "${EROOT}"etc/security/limits.d/._cfg???_50-esync.conf - rm -rf "${EROOT}"lib/udev/rules.d/._cfg???_60-iosched.rules - chown root:smbshare /var/lib/samba/usershare - chmod 1770 /var/lib/samba/usershare - udev_reload - ############################################ -} - -pkg_postrm() { - ############### Redcore Linux ############### - udev_reload - ############################################ -} diff --git a/sys-apps/baselayout/baselayout-2.8-r3.ebuild b/sys-apps/baselayout/baselayout-2.8-r3.ebuild new file mode 100644 index 00000000..d47972a3 --- /dev/null +++ b/sys-apps/baselayout/baselayout-2.8-r3.ebuild @@ -0,0 +1,372 @@ +# Copyright 1999-2020 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 + +inherit multilib versionator prefix udev + +DESCRIPTION="Filesystem baselayout and init scripts" +HOMEPAGE="https://wiki.gentoo.org/wiki/No_homepage" +if [[ ${PV} = 9999 ]]; then + EGIT_REPO_URI="https://anongit.gentoo.org/git/proj/${PN}.git" + inherit git-r3 +else + SRC_URI="https://gitweb.gentoo.org/proj/${PN}.git/snapshot/${P}.tar.bz2" + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86" +fi + +LICENSE="GPL-2" +SLOT="0" +IUSE="build kernel_FreeBSD kernel_linux +split-usr" + +DEPEND="acct-group/smbshare + !net-fs/sambacfg + !sys-boot/grubcfg + !sys-kernel/dracutcfg" +RDEPEND="${DEPEND}" + +pkg_setup() { + multilib_layout +} + +# Create our multilib dirs - the Makefile has no knowledge of this +multilib_layout() { + local dir def_libdir libdir libdirs + local prefix prefix_lst + def_libdir=$(get_abi_LIBDIR $DEFAULT_ABI) + libdirs=$(get_all_libdirs) + : ${libdirs:=lib} # it isn't that we don't trust multilib.eclass... + + if [[ -z "${SYMLINK_LIB}" || ${SYMLINK_LIB} = no ]] ; then + prefix_lst=( "${EROOT}"{,usr/,usr/local/} ) + for prefix in "${prefix_lst[@]}"; do + for libdir in ${libdirs}; do + dir="${prefix}${libdir}" + if [[ -e "${dir}" ]]; then + [[ ! -d "${dir}" ]] && + die "${dir} exists but is not a directory" + continue + fi + if ! use split-usr && [[ ${prefix} = ${EROOT} ]]; then + einfo "symlinking ${dir} to usr/${libdir}" + ln -s usr/${libdir} ${dir} || + die " Unable to make ${dir} symlink" + else + einfo "creating directory ${dir}" + mkdir -p "${dir}" || + die "Unable to create ${dir} directory" + fi + done + done + return 0 + fi + + [ -z "${def_libdir}" ] && + die "your DEFAULT_ABI=$DEFAULT_ABI appears to be invalid" + + # figure out which paths should be symlinks and which should be directories + local dirs syms exp d + for libdir in ${libdirs} ; do + if use split-usr ; then + exp=( {,usr/,usr/local/}${libdir} ) + else + exp=( {usr/,usr/local/}${libdir} ) + fi + for d in "${exp[@]}" ; do + # most things should be dirs + if [ "${SYMLINK_LIB}" = "yes" ] && [ "${libdir}" = "lib" ] ; then + [ ! -h "${d}" ] && [ -e "${d}" ] && dirs+=" ${d}" + else + [ -h "${d}" ] && syms+=" ${d}" + fi + done + done + if [ -n "${syms}${dirs}" ] ; then + ewarn "Your system profile has SYMLINK_LIB=${SYMLINK_LIB:-no}, so that means you need to" + ewarn "have these paths configured as follows:" + [ -n "${dirs}" ] && ewarn "symlinks to '${def_libdir}':${dirs}" + [ -n "${syms}" ] && ewarn "directories:${syms}" + ewarn "The ebuild will attempt to fix these, but only for trivial conversions." + ewarn "If things fail, you will need to manually create/move the directories." + echo + fi + + # setup symlinks and dirs where we expect them to be; do not migrate + # data ... just fall over in that case. + if use split-usr ; then + prefix_lst=( "${EROOT}"{,usr/,usr/local/} ) + else + prefix_lst=( "${EROOT}"{usr/,usr/local/} ) + fi + for prefix in "${prefix_lst[@]}"; do + if [ "${SYMLINK_LIB}" = yes ] ; then + # we need to make sure "lib" points to the native libdir + if [ -h "${prefix}lib" ] ; then + # it's already a symlink! assume it's pointing to right place ... + continue + elif [ -d "${prefix}lib" ] ; then + # "lib" is a dir, so need to convert to a symlink + ewarn "Converting ${prefix}lib from a dir to a symlink" + rm -f "${prefix}lib"/.keep || die + if rmdir "${prefix}lib" 2>/dev/null ; then + ln -s ${def_libdir} "${prefix}lib" || die + else + die "non-empty dir found where we needed a symlink: ${prefix}lib" + fi + else + # nothing exists, so just set it up sanely + ewarn "Initializing ${prefix}lib as a symlink" + mkdir -p "${prefix}" || die + rm -f "${prefix}lib" || die + ln -s ${def_libdir} "${prefix}lib" || die + mkdir -p "${prefix}${def_libdir}" || die #423571 + fi + else + # we need to make sure "lib" is a dir + if [ -h "${prefix}lib" ] ; then + # "lib" is a symlink, so need to convert to a dir + ewarn "Converting ${prefix}lib from a symlink to a dir" + rm -f "${prefix}lib" || die + if [ -d "${prefix}lib32" ] ; then + ewarn "Migrating ${prefix}lib32 to ${prefix}lib" + mv "${prefix}lib32" "${prefix}lib" || die + else + mkdir -p "${prefix}lib" || die + fi + elif [ -d "${prefix}lib" ] && ! has lib32 ${libdirs} ; then + # make sure the old "lib" ABI location does not exist; we + # only symlinked the lib dir on systems where we moved it + # to "lib32" ... + case ${CHOST} in + *-gentoo-freebsd*) ;; # We want it the other way on fbsd. + i?86*|x86_64*|powerpc*|sparc*|s390*) + if [[ -d ${prefix}lib32 && ! -h ${prefix}lib32 ]] ; then + rm -f "${prefix}lib32"/.keep || die + if ! rmdir "${prefix}lib32" 2>/dev/null ; then + ewarn "You need to merge ${prefix}lib32 into ${prefix}lib" + die "non-empty dir found where there should be none: ${prefix}lib32" + fi + fi + ;; + esac + else + # nothing exists, so just set it up sanely + ewarn "Initializing ${prefix}lib as a dir" + mkdir -p "${prefix}lib" || die + fi + fi + done + if ! use split-usr ; then + for libdir in ${libdirs}; do + if [[ ! -e "${EROOT}${libdir}" ]]; then + ln -s usr/"${libdir}" "${EROOT}${libdir}" || + die " Unable to make ${EROOT}${libdir} symlink" + fi + done + fi +} + +pkg_preinst() { + # This is written in src_install (so it's in CONTENTS), but punt all + # pending updates to avoid user having to do etc-update (and make the + # pkg_postinst logic simpler). + rm -f "${EROOT}"/etc/._cfg????_gentoo-release || die + + # We need to install directories and maybe some dev nodes when building + # stages, but they cannot be in CONTENTS. + # Also, we cannot reference $S as binpkg will break so we do this. + multilib_layout + if use build ; then + if use split-usr ; then + emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout + else + emake -C "${ED}/usr/share/${PN}" DESTDIR="${EROOT}" layout-usrmerge + fi + fi + rm -f "${ED}"/usr/share/${PN}/Makefile || die +} + +src_prepare() { + default + eapply "${FILESDIR}"/"${P}"-redcore.patch + if use prefix; then + hprefixify -e "/EUID/s,0,${EUID}," -q '"' etc/profile + hprefixify etc/{env.d/50baselayout,shells} share.Linux/passwd + echo PATH=/usr/sbin:/sbin:/usr/bin:/bin >> etc/env.d/99host + fi + + # don't want symlinked directories in PATH on systems with usr-merge + if ! use split-usr; then + sed \ + -e 's|/usr/local/sbin:||g' \ + -e 's|:/usr/sbin:|:|g' \ + -e 's|:/sbin:|:|g' \ + -e 's|:/bin:|:|g' \ + -i etc/env.d/50baselayout || die + fi + + # handle multilib paths. do it here because we want this behavior + # regardless of the C library that you're using. we do explicitly + # list paths which the native ldconfig searches, but this isn't + # problematic as it doesn't change the resulting ld.so.cache or + # take longer to generate. similarly, listing both the native + # path and the symlinked path doesn't change the resulting cache. + local libdir ldpaths + for libdir in $(get_all_libdirs) ; do + use split-usr && ldpaths+=":${EPREFIX}/${libdir}" + ldpaths+=":${EPREFIX}/usr/${libdir}" + ldpaths+=":${EPREFIX}/usr/local/${libdir}" + done + echo "LDPATH='${ldpaths#:}'" >> etc/env.d/50baselayout + + # rc-scripts version for testing of features that *should* be present + echo "Redcore Linux Hardened - rolling" > etc/redcore-release +} + +src_install() { + emake \ + OS=$(usex kernel_FreeBSD BSD Linux) \ + DESTDIR="${ED}" \ + install + + # need the makefile in pkg_preinst + insinto /usr/share/${PN} + doins Makefile + dodoc ChangeLog + + ############### Redcore Linux ############### + # + # issue.logo + rm "${ED}"/etc/issue.logo + # + # NetworkManager + dodir /etc/NetworkManager + insinto /etc/NetworkManager + newins "${FILESDIR}"/nmcfg NetworkManager.conf + # + # dracut + dodir /etc/dracut.conf.d + insinto /etc/dracut.conf.d + newins "${FILESDIR}"/dracutcfg dracut-redcore.conf + # + # grub + dodir /etc/default + insinto /etc/default + newins "${FILESDIR}"/grubcfg grub + # + # samba + dodir /etc/samba + insinto /etc/samba + newins "${FILESDIR}"/smbcfg smb.conf + keepdir var/lib/samba/usershare + # cryptsetup + dodir /etc/conf.d + insinto /etc/conf.d + newins ${FILESDIR}/dmcryptcfg dmcrypt + # + # esync + dodir /etc/security/limits.d + insinto /etc/security/limits.d + newins ${FILESDIR}/esynccfg 50-esync.conf + # + # IOsched + dodir /lib/udev/rules.d/ + insinto /lib/udev/rules.d + newins ${FILESDIR}/ioschedcfg 60-iosched.rules + # + ############################################## +} + +pkg_postinst() { + local x + + # We installed some files to /usr/share/baselayout instead of /etc to stop + # (1) overwriting the user's settings + # (2) screwing things up when attempting to merge files + # (3) accidentally packaging up personal files with quickpkg + # If they don't exist then we install them + for x in master.passwd passwd shadow group fstab ; do + [ -e "${EROOT}etc/${x}" ] && continue + [ -e "${EROOT}usr/share/baselayout/${x}" ] || continue + cp -p "${EROOT}usr/share/baselayout/${x}" "${EROOT}"etc || die + done + + # Force shadow permissions to not be world-readable #260993 + for x in shadow ; do + if [ -e "${EROOT}etc/${x}" ] ; then + chmod o-rwx "${EROOT}etc/${x}" || die + fi + done + + # whine about users that lack passwords #193541 + if [[ -e "${EROOT}"etc/shadow ]] ; then + local bad_users=$(sed -n '/^[^:]*::/s|^\([^:]*\)::.*|\1|p' "${EROOT}"/etc/shadow) + if [[ -n ${bad_users} ]] ; then + echo + ewarn "The following users lack passwords!" + ewarn ${bad_users} + fi + fi + + # whine about users with invalid shells #215698 + if [[ -e "${EROOT}"etc/passwd ]] ; then + local bad_shells=$(awk -F: 'system("test -e " $7) { print $1 " - " $7}' "${EROOT}"etc/passwd | sort) + if [[ -n ${bad_shells} ]] ; then + echo + ewarn "The following users have non-existent shells!" + ewarn "${bad_shells}" + fi + fi + + # https://bugs.gentoo.org/361349 + if use kernel_linux; then + mkdir -p "${EROOT}"run || die + + local found fstype mountpoint + while read -r _ mountpoint fstype _; do + [[ ${mountpoint} = /run ]] && [[ ${fstype} = tmpfs ]] && found=1 + done < "${ROOT}"proc/mounts + [[ -z ${found} ]] && + ewarn "You should reboot now to get /run mounted with tmpfs!" + fi + + for x in ${REPLACING_VERSIONS}; do + if ! version_is_at_least 2.4 ${x}; then + ewarn "After updating ${EROOT}etc/profile, please run" + ewarn "env-update && . /etc/profile" + fi + + if ! version_is_at_least 2.6 ${x}; then + ewarn "Please run env-update then log out and back in to" + ewarn "update your path." + fi + # clean up after 2.5 typos + # https://bugs.gentoo.org/show_bug.cgi?id=656380 + if [[ ${x} == 2.5 ]]; then + rm -fr "${EROOT}{,usr" || die + fi + done + + if [[ -e "${EROOT}"etc/env.d/00basic ]]; then + ewarn "${EROOT}etc/env.d/00basic is now ${EROOT}etc/env.d/50baselayout" + ewarn "Please migrate your changes." + fi + + ############### Redcore Linux ############### + rm -rf "${EROOT}"etc/dracut.conf.d/._cfg????_dracut-redcore.conf + rm -rf "${EROOT}"etc/default/._cfg????_grub + rm -rf "${EROOT}"etc/samba/._cfg????_smb.conf + rm -rf "${EROOT}"etc/conf.d/._cfg???_dmcrypt + rm -rf "${EROOT}"etc/security/limits.d/._cfg???_50-esync.conf + rm -rf "${EROOT}"lib/udev/rules.d/._cfg???_60-iosched.rules + chown root:smbshare /var/lib/samba/usershare + chmod 1770 /var/lib/samba/usershare + udev_reload + ############################################ +} + +pkg_postrm() { + ############### Redcore Linux ############### + udev_reload + ############################################ +} diff --git a/sys-apps/baselayout/files/baselayout-2.13-redcore.patch b/sys-apps/baselayout/files/baselayout-2.13-redcore.patch new file mode 100644 index 00000000..f7bf014f --- /dev/null +++ b/sys-apps/baselayout/files/baselayout-2.13-redcore.patch @@ -0,0 +1,39 @@ +diff -Nur a/Makefile b/Makefile +--- a/Makefile 2023-01-28 02:07:40.000000000 +0000 ++++ b/Makefile 2023-03-22 12:56:40.286162399 +0000 +@@ -52,12 +52,11 @@ + install: + $(INSTALL_DIR) $(DESTDIR)/etc + cp -pPR etc/* $(DESTDIR)/etc/ +- echo "Gentoo Base System release ${PV}" > ${DESTDIR}/etc/gentoo-release + $(INSTALL_DIR) $(DESTDIR)/lib + cp -pPR lib/* $(DESTDIR)/lib/ + $(INSTALL_DIR) $(DESTDIR)/usr/lib + ln -snf ../usr/lib/os-release ${DESTDIR}/etc/os-release +- ./make_os_release ${PV} > $(DESTDIR)/usr/lib/os-release ++ ./make_os_release rolling > $(DESTDIR)/usr/lib/os-release + $(INSTALL_DIR) $(DESTDIR)/usr/share/baselayout + cp -pPR share/* $(DESTDIR)/usr/share/baselayout/ + ln -snf ../proc/self/mounts $(DESTDIR)/etc/mtab +diff -Nur a/make_os_release b/make_os_release +--- a/make_os_release 2023-01-28 02:07:40.000000000 +0000 ++++ b/make_os_release 2023-03-22 12:55:10.748165053 +0000 +@@ -4,12 +4,12 @@ + exit 1 + fi + cat < ${DESTDIR}/etc/gentoo-release + $(INSTALL_DIR) $(DESTDIR)/lib + cp -pPR lib.$(OS)/* $(DESTDIR)/lib/ + $(INSTALL_DIR) $(DESTDIR)/usr/lib + ln -snf ../usr/lib/os-release ${DESTDIR}/etc/os-release +- ./make_os_release ${OS} ${PV} > $(DESTDIR)/usr/lib/os-release ++ ./make_os_release ${OS} rolling > $(DESTDIR)/usr/lib/os-release + $(INSTALL_DIR) $(DESTDIR)/usr/share/baselayout + cp -pPR share.$(OS)/* $(DESTDIR)/usr/share/baselayout/ + +diff -Nur a/make_os_release b/make_os_release +--- a/make_os_release 2021-09-27 22:48:05.000000000 +0100 ++++ b/make_os_release 2022-09-21 12:49:21.760390518 +0100 +@@ -4,12 +4,12 @@ + exit 1 + fi + cat < ${DESTDIR}/etc/gentoo-release - $(INSTALL_DIR) $(DESTDIR)/lib - cp -pPR lib.$(OS)/* $(DESTDIR)/lib/ - $(INSTALL_DIR) $(DESTDIR)/usr/lib - ln -snf ../usr/lib/os-release ${DESTDIR}/etc/os-release -- ./make_os_release ${OS} ${PV} > $(DESTDIR)/usr/lib/os-release -+ ./make_os_release ${OS} rolling > $(DESTDIR)/usr/lib/os-release - $(INSTALL_DIR) $(DESTDIR)/usr/share/baselayout - cp -pPR share.$(OS)/* $(DESTDIR)/usr/share/baselayout/ - -diff -Nur a/make_os_release b/make_os_release ---- a/make_os_release 2021-09-27 22:48:05.000000000 +0100 -+++ b/make_os_release 2022-09-21 12:49:21.760390518 +0100 -@@ -4,12 +4,12 @@ - exit 1 - fi - cat <