From 274322b84acc35f6a4c4bff08cfdce25cfe46c3b Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Tue, 12 Oct 2021 01:06:08 +0100 Subject: app-misc/calamares-config-redcore : version bump --- .../calamares-config-redcore-314-r5.ebuild | 24 ---- .../calamares-config-redcore-314-r6.ebuild | 24 ++++ .../files/modules/bootloader.conf | 43 +----- .../files/modules/displaymanager.conf | 45 ------ .../files/modules/finished.conf | 38 ----- .../files/modules/keyboard.conf | 6 +- .../files/modules/machineid.conf | 16 --- .../files/modules/packages.conf | 157 --------------------- .../files/modules/users.conf | 120 ---------------- .../calamares-config-redcore/files/settings.conf | 148 +------------------ 10 files changed, 28 insertions(+), 593 deletions(-) delete mode 100644 app-misc/calamares-config-redcore/calamares-config-redcore-314-r5.ebuild create mode 100644 app-misc/calamares-config-redcore/calamares-config-redcore-314-r6.ebuild (limited to 'app-misc/calamares-config-redcore') diff --git a/app-misc/calamares-config-redcore/calamares-config-redcore-314-r5.ebuild b/app-misc/calamares-config-redcore/calamares-config-redcore-314-r5.ebuild deleted file mode 100644 index 9f6639d2..00000000 --- a/app-misc/calamares-config-redcore/calamares-config-redcore-314-r5.ebuild +++ /dev/null @@ -1,24 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: $ - -EAPI=5 - -DESCRIPTION="Redcore Linux Calamares modules config" -HOMEPAGE="" -SRC_URI="" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 x86" -IUSE="" - -RDEPEND="app-admin/calamares" - -S="${FILESDIR}" - -src_install() { - dodir "/etc/calamares" || die - insinto "/etc/calamares" || die - doins -r "${S}/"* || die -} diff --git a/app-misc/calamares-config-redcore/calamares-config-redcore-314-r6.ebuild b/app-misc/calamares-config-redcore/calamares-config-redcore-314-r6.ebuild new file mode 100644 index 00000000..9f6639d2 --- /dev/null +++ b/app-misc/calamares-config-redcore/calamares-config-redcore-314-r6.ebuild @@ -0,0 +1,24 @@ +# Copyright 1999-2015 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +EAPI=5 + +DESCRIPTION="Redcore Linux Calamares modules config" +HOMEPAGE="" +SRC_URI="" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="amd64 x86" +IUSE="" + +RDEPEND="app-admin/calamares" + +S="${FILESDIR}" + +src_install() { + dodir "/etc/calamares" || die + insinto "/etc/calamares" || die + doins -r "${S}/"* || die +} diff --git a/app-misc/calamares-config-redcore/files/modules/bootloader.conf b/app-misc/calamares-config-redcore/files/modules/bootloader.conf index 789b7918..bad9c863 100644 --- a/app-misc/calamares-config-redcore/files/modules/bootloader.conf +++ b/app-misc/calamares-config-redcore/files/modules/bootloader.conf @@ -1,53 +1,14 @@ -# Bootloader configuration. The bootloader is installed to allow -# the system to start (and pick one of the installed operating -# systems to run). --- -# Define which bootloader you want to use for EFI installations -# Possible options are 'grub', 'sb-shim' and 'systemd-boot'. efiBootLoader: "grub" -# systemd-boot configuration files settings, set kernel and initramfs file names -# and amount of time before default selection boots -kernel: "/boot/vmlinuz-5.10.11-redcore-lts" -img: "/boot/initrd-5.10.11-redcore-lts" +kernel: "/boot/vmlinuz-5.14.10-redcore" +img: "/boot/initrd-5.14.10-redcore" timeout: "10" -# Optionally set the menu entry name and kernel name to use in systemd-boot. -# If not specified here, these settings will be taken from branding.desc. -# -# bootloaderEntryName: "Generic GNU/Linux" -# kernelLine: ", with Stable-Kernel" -# fallbackKernelLine: ", with Stable-Kernel (fallback initramfs)" - -# GRUB 2 binary names and boot directory -# Some distributions (e.g. Fedora) use grub2-* (resp. /boot/grub2/) names. -# These names are also used when using sb-shim, since that needs some -# GRUB functionality (notably grub-probe) to work. As needed, you may use -# complete paths like `/usr/bin/efibootmgr` for the executables. -# grubInstall: "grub2-install" grubMkconfig: "grub2-mkconfig" grubCfg: "/boot/grub/grub.cfg" grubProbe: "grub2-probe" efiBootMgr: "efibootmgr" -# Optionally set the bootloader ID to use for EFI. This is passed to -# grub-install --bootloader-id. -# -# If not set here, the value from bootloaderEntryName from branding.desc -# is used, with problematic characters (space and slash) replaced. -# -# The ID is also used as a directory name within the EFI environment, -# and the bootloader is copied from /boot/efi/EFI// . When -# setting the option here, keep in mind that the name is sanitized -# (problematic characters, see above, are replaced). -# -# efiBootloaderId: "dirname" - -# Optionally install a copy of the GRUB EFI bootloader as the EFI -# fallback loader (either bootia32.efi or bootx64.efi depending on -# the system). This may be needed on certain systems (Intel DH87MC -# seems to be the only one). If you set this to false, take care -# to add another module to optionally install the fallback on those -# boards that need it. installEFIFallback: true diff --git a/app-misc/calamares-config-redcore/files/modules/displaymanager.conf b/app-misc/calamares-config-redcore/files/modules/displaymanager.conf index 18250fd0..d82deb6a 100644 --- a/app-misc/calamares-config-redcore/files/modules/displaymanager.conf +++ b/app-misc/calamares-config-redcore/files/modules/displaymanager.conf @@ -1,52 +1,7 @@ -# Configure one or more display managers (e.g. SDDM) -# with a "best effort" approach. -# -# This module also sets up autologin, if the feature is enabled in -# globalstorage (where it would come from the users page). --- -# The DM module attempts to set up all the DMs found in this list, in the -# precise order listed. The displaymanagers list can also be set in -# globalstorage, and in that case it overrides the setting here. -# -# If *sysconfigSetup* is set to *true* (see below, only relevant for -# openSUSE derivatives) then this list is ignored and only sysconfig -# is attempted. You can also list "sysconfig" in this list instead. -# displaymanagers: - sddm -# Enable the following settings to force a desktop environment -# in your displaymanager configuration file. This will attempt -# to configure the given DE (without checking if it is installed). -# The DM configuration for each potential DM may **or may not** -# support configuring a default DE, so the keys are mandatory -# but their interpretation is up to the DM configuration. -# -# Subkeys of *defaultDesktopEnvironment* are (all mandatory): -# - *executable* a full path to an executable -# - *desktopFile* a .desktop filename -# -# If this is **not** set, then Calamares will look for installed -# DE's and pick the first one it finds that is actually installed. -# -# If this **is** set, and the *executable* key doesn't point to -# an installed file, then the .desktop file's TryExec key is -# used instead. -# - -#defaultDesktopEnvironment: -# executable: "startkde" -# desktopFile: "plasma" - -#If true, try to ensure that the user, group, /var directory etc. for the -#display manager are set up correctly. This is normally done by the distribution -#packages, and best left to them. Therefore, it is disabled by default. basicSetup: false -# If true, setup autologin for openSUSE. This only makes sense on openSUSE -# derivatives or other systems where /etc/sysconfig/displaymanager exists. -# -# The preferred way to pick sysconfig is to just list it in the -# *displaymanagers* list (as the only one). -# sysconfigSetup: false diff --git a/app-misc/calamares-config-redcore/files/modules/finished.conf b/app-misc/calamares-config-redcore/files/modules/finished.conf index 3c6ca4ff..d317c905 100644 --- a/app-misc/calamares-config-redcore/files/modules/finished.conf +++ b/app-misc/calamares-config-redcore/files/modules/finished.conf @@ -1,44 +1,6 @@ -# Configuration for the "finished" page, which is usually shown only at -# the end of the installation (successful or not). --- -# DEPRECATED -# -# The finished page can hold a "restart system now" checkbox. -# If this is false, no checkbox is shown and the system is not restarted -# when Calamares exits. -# restartNowEnabled: true - -# DEPRECATED -# -# Initial state of the checkbox "restart now". Only relevant when the -# checkbox is shown by restartNowEnabled. -# restartNowChecked: false - -# Behavior of the "restart system now" button. -# -# There are four usable values: -# - never -# Does not show the button and does not restart. -# This matches the old behavior with restartNowEnabled=false. -# - user-unchecked -# Shows the button, defaults to unchecked, restarts if it is checked. -# This matches the old behavior with restartNowEnabled=true and restartNowChecked=false. -# - user-checked -# Shows the button, defaults to checked, restarts if it is checked. -# This matches the old behavior with restartNowEnabled=true and restartNowChecked=true. -# - always -# Shows the button, checked, but the user cannot change it. -# This is new behavior. -# -# The three combinations of legacy values are still supported. restartNowMode: user-unchecked -# If the checkbox is shown, and the checkbox is checked, then when -# Calamares exits from the finished-page it will run this command. -# If not set, falls back to "shutdown -r now". restartNowCommand: "shutdown -r 0" -# When the last page is (successfully) reached, send a DBus notification -# to the desktop that the installation is done. This works only if the -# user as whom Calamares is run, can reach the regular desktop session bus. notifyOnFinished: false diff --git a/app-misc/calamares-config-redcore/files/modules/keyboard.conf b/app-misc/calamares-config-redcore/files/modules/keyboard.conf index ff60ed60..fa205623 100644 --- a/app-misc/calamares-config-redcore/files/modules/keyboard.conf +++ b/app-misc/calamares-config-redcore/files/modules/keyboard.conf @@ -1,8 +1,4 @@ --- -# The name of the file to write X11 keyboard settings to -# The default value is the name used by upstream systemd-localed. -# Relative paths are assumed to be relative to /etc/X11/xorg.conf.d xOrgConfFileName: "/usr/share/X11/xorg.conf.d/00-keyboard.conf" -# The path to search for keymaps converted from X11 to kbd format -# Leave this empty if the setting does not make sense on your distribution. + convertedKeymapPath: "/usr/share/keymaps/" diff --git a/app-misc/calamares-config-redcore/files/modules/machineid.conf b/app-misc/calamares-config-redcore/files/modules/machineid.conf index 13ba17df..bf99e675 100644 --- a/app-misc/calamares-config-redcore/files/modules/machineid.conf +++ b/app-misc/calamares-config-redcore/files/modules/machineid.conf @@ -1,24 +1,8 @@ -# Machine-ID and other random data on the target system. -# -# This module can create a number of "random" things on the target: -# - a systemd machine-id file (hence the name of the Calamares module) -# with a random UUID. -# - a dbus machine-id file (or, optionally, link to the one from systemd) -# - an entropy file -# --- -# Whether to create /etc/machine-id for systemd. systemd: false -# Whether to create /var/lib/dbus/machine-id for D-Bus. dbus: true -# Whether /var/lib/dbus/machine-id should be a symlink to /etc/machine-id -# (ignored if dbus is false, or if there is no /etc/machine-id to point to). dbus-symlink: true -# this is a deprecated form of *dbus-symlink* -symlink: true -# Whether to create an entropy file entropy: false -# Whether to copy entropy from the host entropy-copy: false diff --git a/app-misc/calamares-config-redcore/files/modules/packages.conf b/app-misc/calamares-config-redcore/files/modules/packages.conf index 52ef498e..71a1f4fe 100644 --- a/app-misc/calamares-config-redcore/files/modules/packages.conf +++ b/app-misc/calamares-config-redcore/files/modules/packages.conf @@ -1,167 +1,10 @@ --- -# -# Which package manager to use, options are: -# - packagekit - PackageKit CLI tool -# - zypp - Zypp RPM frontend -# - yum - Yum RPM frontend -# - dnf - DNF, the new RPM frontend -# - urpmi - Mandriva package manager -# - apt - APT frontend for DEB and RPM -# - pacman - Pacman -# - portage - Gentoo package manager -# - entropy - Sabayon package manager -# - apk = Alpine Linux package manager -# - dummy - Dummy manager, only logs -# backend: portage -# -# Often package installation needs an internet connection. -# Since you may allow system installation without a connection -# and want to offer OPTIONAL package installation, it's -# possible to have no internet, yet have this packages module -# enabled in settings. -# -# You can skip the whole module when there is no internet -# by setting "skip_if_no_internet" to true. -# -# You can run a package-manager specific update procedure -# before installing packages (for instance, to update the -# list of packages and dependencies); this is done only if there -# is an internet connection. -# -# Set "update_db" to 'true' for refreshing the database on the -# target system. On target installations, which got installed by -# unsquashing, a full system update may be needed. Otherwise -# post-installing additional packages may result in conflicts. -# Therefore set also "update_system" to 'true'. -# skip_if_no_internet: false update_db: false update_system: false -# -# List of maps with package operations such as install or remove. -# Distro developers can provide a list of packages to remove -# from the installed system (for instance packages meant only -# for the live system). -# -# A job implementing a distro specific logic to determine other -# packages that need to be installed or removed can run before -# this one. Distro developers may want to install locale packages -# or remove drivers not needed on the installed system. -# Such a job would populate a list of dictionaries in the global -# storage called "packageOperations" and that list is processed -# after the static list in the job configuration (i.e. the list -# that is in this configuration file). -# -# Allowed package operations are: -# - *install*, *try_install*: will call the package manager to -# install one or more packages. The install target will -# abort the whole installation if package-installation -# fails, while try_install carries on. Packages may be -# listed as (localized) names, or as (localized) package-data. -# See below for the description of the format. -# - *localInstall*: this is used to call the package manager -# to install a package from a path-to-a-package. This is -# useful if you have a static package archive on the install media. -# The *pacman* package manager is the only one to specially support -# this operation (all others treat this the same as *install*). -# - *remove*, *try_remove*: will call the package manager to -# remove one or more packages. The remove target will -# abort the whole installation if package-removal fails, -# while try_remove carries on. Packages may be listed as -# (localized) names. -# One additional key is recognized, to help netinstall out: -# - *source*: ignored, does get logged -# Any other key is ignored, and logged as a warning. -# -# There are two formats for naming packages: as a name or as package-data, -# which is an object notation providing package-name, as well as pre- and -# post-install scripts. -# -# Here are both formats, for installing vi. The first one just names the -# package for vi (using the naming of the installed package manager), while -# the second contains three data-items; the pre-script is run before invoking -# the package manager, and the post-script runs once it is done. -# -# - install -# - vi -# - package: vi -# pre-script: touch /tmp/installing-vi -# post-script: rm -f /tmp/installing-vi -# -# The pre- and post-scripts are optional, but you cannot leave both out -# if you do use the *package* key: using "package: vi" with neither script -# option will trick Calamares into trying to install a package named -# "package: vi", which is unlikely to work. -# -# The pre- and post-scripts are **not** executed by a shell unless you -# explicitly invoke `/bin/sh` in them. The command-lines are passed -# to exec(), which does not understand shell syntax. In other words: -# -# pre-script: ls | wc -l -# -# Will fail, because `|` is passed as a command-line argument to ls, -# as are `wc`, and `-l`. No shell pipeline is set up, and ls is likely -# to complain. Invoke the shell explicitly: -# -# pre-script: /bin/sh -c \"ls | wc -l\" -# -# The above note on shell-expansion applies to versions up-to-and-including -# Calamares 3.2.12, but will change in future. -# -# Any package name may be localized; this is used to install localization -# packages for software based on the selected system locale. By including -# the string `LOCALE` in the package name, the following happens: -# -# - if the system locale is English (any variety), then the package is not -# installed at all, -# - otherwise `$LOCALE` or `${LOCALE}` is replaced by the 'lower-cased' BCP47 -# name of the 'language' part of the selected system locale (not the -# country/region/dialect part), e.g. selecting "nl_BE" will use "nl" -# here. -# -# Take care that just plain `LOCALE` will not be replaced, so `foo-LOCALE` will -# be left unchanged, while `foo-$LOCALE` will be changed. However, `foo-LOCALE` -# **will** be removed from the list of packages (i.e. not installed), if -# English is selected. If a non-English locale is selected, then `foo-LOCALE` -# will be installed, unchanged (no language-name-substitution occurs). -# -# The following installs localizations for vi, if they are relevant; if -# there is no localization, installation continues normally. -# -# - install -# - vi-$LOCALE -# - package: vi-${LOCALE} -# pre-script: touch /tmp/installing-vi -# post-script: rm -f /tmp/installing-vi -# -# When installing packages, Calamares will invoke the package manager -# with a list of package names if it can; package-data prevents this because -# of the scripts that need to run. In other words, this: -# -# - install: -# - vi -# - binutils -# - package: wget -# pre-script: touch /tmp/installing-wget -# -# This will invoke the package manager three times, once for each package, -# because not all of them are simple package names. You can speed up the -# process if you have only a few pre-scripts, by using multiple install targets: -# -# - install: -# - vi -# - binutils -# - install: -# - package: wget -# pre-script: touch /tmp/installing-wget -# -# This will call the package manager once with the package-names "vi" and -# "binutils", and then a second time for "wget". When installing large numbers -# of packages, this can lead to a considerable time savings. -# operations: - remove: - app-admin/calamares diff --git a/app-misc/calamares-config-redcore/files/modules/users.conf b/app-misc/calamares-config-redcore/files/modules/users.conf index 8a1addc0..a94d71ca 100644 --- a/app-misc/calamares-config-redcore/files/modules/users.conf +++ b/app-misc/calamares-config-redcore/files/modules/users.conf @@ -1,18 +1,4 @@ -# Configuration for the one-user-system user module. -# -# Besides these settings, the user module also places the following -# keys into the globalconfig area, based on user input in the view step. -# -# - hostname -# - username -# - password (obscured) -# - autologinUser (if enabled, set to username) -# -# These globalconfig keys are set when the jobs for this module -# are created. --- -# Used as default groups for the created user. -# Adjust to your Distribution defaults. defaultGroups: - lp - lpadmin @@ -32,120 +18,14 @@ defaultGroups: - messagebus - smbshare -# Some Distributions require a 'autologin' group for the user. -# Autologin causes a user to become automatically logged in to -# the desktop environment on boot. -# Disable when your Distribution does not require such a group. -# autologinGroup: autologin -# You can control the initial state for the 'autologin checkbox' here. -# Possible values are: -# - true to check or -# - false to uncheck -# These set the **initial** state of the checkbox. doAutologin: true -# When *sudoersGroup* is set to a non-empty string, Calamares creates a -# sudoers file for the user. This file is located at: -# `/etc/sudoers.d/10-installer` -# Remember to add the (value of) *sudoersGroup* to *defaultGroups*. -# -# If your Distribution already sets up a group of sudoers in its packaging, -# remove this setting (delete or comment out the line below). Otherwise, -# the setting will be duplicated in the `/etc/sudoers.d/10-installer` file, -# potentially confusing users. -# sudoersGroup: wheel - -# Setting this to false, causes the root account to be disabled. -# When disabled, hides the "Use the same password for administrator" -# checkbox. Also hides the "Choose a password" and associated text-inputs. setRootPassword: true -# You can control the initial state for the 'reuse password for root' -# checkbox here. Possible values are: -# - true to check or -# - false to uncheck -# -# When checked, the user password is used for the root account too. -# -# NOTE: *doReusePassword* requires *setRootPassword* to be enabled. doReusePassword: false -# These are optional password-requirements that a distro can enforce -# on the user. The values given in this sample file set only very weak -# validation settings. -# -# - nonempty rejects empty passwords -# - there are no length validations -# - libpwquality (if it is enabled at all) has no length of class -# restrictions, although it will still reject palindromes and -# dictionary words with these settings. -# -# Checks may be listed multiple times; each is checked separately, -# and no effort is done to ensure that the checks are consistent -# (e.g. specifying a maximum length less than the minimum length -# will annoy users). -# -# The libpwquality check relies on the (optional) libpwquality library. -# Its value is a list of configuration statements that could also -# be found in pwquality.conf, and these are handed off to the -# libpwquality parser for evaluation. The check is ignored if -# libpwquality is not available at build time (generates a warning in -# the log). The Calamares password check rejects passwords with a -# score of < 40 with the given libpwquality settings. -# -# (additional checks may be implemented in CheckPWQuality.cpp and -# wired into UsersPage.cpp) -# -# - To disable specific password validations: -# comment out the relevant 'passwordRequirements' keys below. -# - To disable all password validations: -# set both 'allowWeakPasswords' and 'allowWeakPasswordsDefault' to true. -# (That will show the box *Allow weak passwords* in the user- -# interface, and check it by default). -# passwordRequirements: -# nonempty: true -# minLength: -1 # Password at least this many characters -# maxLength: -1 # Password at most this many characters -# libpwquality: -# - minlen=0 -# - minclass=0 - -# You can control the visibility of the 'strong passwords' checkbox here. -# Possible values are: -# - true to show or -# - false to hide (default) -# the checkbox. This checkbox allows the user to choose to disable -# password-strength-checks. By default the box is **hidden**, so -# that you have to pick a password that satisfies the checks. allowWeakPasswords: true -# You can control the initial state for the 'strong passwords' checkbox here. -# Possible values are: -# - true to uncheck or -# - false to check (default) -# the checkbox by default. Since the box is labeled to enforce strong -# passwords, in order to **allow** weak ones by default, the box needs -# to be unchecked. allowWeakPasswordsDefault: true -# Shell to be used for the regular user of the target system. -# There are three possible kinds of settings: -# - unset (i.e. commented out, the default), act as if set to /bin/bash -# - empty (explicit), don't pass shell information to useradd at all -# and rely on a correct configuration file in /etc/default/useradd -# - set, non-empty, use that path as shell. No validation is done -# that the shell actually exists or is executable. -# userShell: /bin/bash - -# Hostname setting -# -# The user can enter a hostname; this is configured into the system -# in some way; pick one of: -# - *None*, to not set the hostname at all -# - *EtcFile*, to write to `/etc/hostname` directly -# - *Hostnamed*, to use systemd hostnamed(1) over DBus -# The default is *EtcFile*. setHostname: EtcFile - -# Should /etc/hosts be written with a hostname for this machine -# (also adds localhost and some ipv6 standard entries). writeHostsFile: true diff --git a/app-misc/calamares-config-redcore/files/settings.conf b/app-misc/calamares-config-redcore/files/settings.conf index 713af9e0..c17ae61c 100644 --- a/app-misc/calamares-config-redcore/files/settings.conf +++ b/app-misc/calamares-config-redcore/files/settings.conf @@ -1,89 +1,5 @@ -# Configuration file for Calamares -# Syntax is YAML 1.2 ---- -# Modules can be job modules (with different interfaces) and QtWidgets view -# modules. They could all be placed in a number of different paths. -# "modules-search" is a list of strings, each of these can either be a full -# path to a directory or the keyword "local". -# -# "local" means: -# - modules in $LIBDIR/calamares/modules, with -# - settings in SHARE/calamares/modules or /etc/calamares/modules. -# In debug-mode (e.g. calamares -d) "local" also adds some paths -# that make sense from inside the build-directory, so that you -# can build-and-run with the latest modules immediately. -# -# Strings other than "local" are taken as paths and interpreted -# relative to wherever Calamares is started. It is therefore **strongly** -# recommended to use only absolute paths here. This is mostly useful -# if your distro has forks of standard Calamares modules, but also -# uses some form of upstream packaging which might overwrite those -# forked modules -- then you can keep modules somewhere outside of -# the "regular" module tree. -# -# -# YAML: list of strings. modules-search: [ local ] -# Instances section. This section is optional, and it defines custom instances -# for modules of any kind. An instance entry has an module name, an instance -# name, and a configuration file name. The primary goal of this mechanism is -# to allow loading multiple instances of the same module, with different -# configuration. If you don't need this, the instances section can safely be -# left empty. -# -# Module name plus instance name makes an instance key, e.g. -# "webview@owncloud", where "webview" is the module name (for the webview -# viewmodule) and "owncloud" is the instance name. In the *sequence* -# section below, use instance-keys to name instances (instead of just -# a module name, for modules which have only a single instance). -# -# Every module implicitly has an instance with the instance name equal -# to its module name, e.g. "welcome@welcome". In the *sequence* section, -# mentioning a module without a full instance key (e.g. "welcome") -# means that implicit module. -# -# An instance must specify its configuration file (e.g. `webview-home.conf`). -# The implicit instances all have configuration files named `.conf`. -# This (implict) way matches the source examples, where the welcome -# module contains an example `welcome.conf`. -# -# For more information on running module instances, run Calamares in debug -# mode and check the Modules page in the Debug information interface. -# -# A module that is often used with instances is shellprocess, which will -# run shell commands specified in the configuration file. By configuring -# more than one instance of the module, multiple shell sessions can be run -# during install. -# -# YAML: list of maps of string:string key-value pairs. -#instances: -#- id: owncloud -# module: webview -# config: owncloud.conf - -# Sequence section. This section describes the sequence of modules, both -# viewmodules and jobmodules, as they should appear and/or run. -# -# A jobmodule instance key (or name) can only appear in an exec phase, whereas -# a viewmodule instance key (or name) can appear in both exec and show phases. -# There is no limit to the number of show or exec phases. However, the same -# module instance key should not appear more than once per phase, and -# deployers should take notice that the global storage structure is persistent -# throughout the application lifetime, possibly influencing behavior across -# phases. A show phase defines a sequence of viewmodules (and therefore -# pages). These viewmodules can offer up jobs for the execution queue. -# -# An exec phase displays a progress page (with brandable slideshow). This -# progress page iterates over the modules listed in the *immediately -# preceding* show phase, and enqueues their jobs, as well as any other jobs -# from jobmodules, in the order defined in the current exec phase. -# -# It then executes the job queue and clears it. If a viewmodule offers up a -# job for execution, but the module name (or instance key) isn't listed in the -# immediately following exec phase, this job will not be executed. -# -# YAML: list of lists of strings. sequence: - show: - welcome @@ -115,73 +31,11 @@ sequence: - show: - finished -# A branding component is a directory, either in SHARE/calamares/branding or -# in /etc/calamares/branding (the latter takes precedence). The directory must -# contain a YAML file branding.desc which may reference additional resources -# (such as images) as paths relative to the current directory. -# -# A branding component can also ship a QML slideshow for execution pages, -# along with translation files. -# -# Only the name of the branding component (directory) should be specified -# here, Calamares then takes care of finding it and loading the contents. -# -# YAML: string. branding: redcore_branding - -# If this is set to true, Calamares will show an "Are you sure?" prompt right -# before each execution phase, i.e. at points of no return. If this is set to -# false, no prompt is shown. Default is false, but Calamares will complain if -# this is not explicitly set. -# -# YAML: boolean. prompt-install: true - -# If this is set to true, Calamares will execute all target environment -# commands in the current environment, without chroot. This setting should -# only be used when setting up Calamares as a post-install configuration tool, -# as opposed to a full operating system installer. -# -# Some official Calamares modules are not expected to function with this -# setting. (e.g. partitioning seems like a bad idea, since that is expected to -# have been done already) -# -# Default is false (for a normal installer), but Calamares will complain if -# this is not explicitly set. -# -# YAML: boolean. dont-chroot: false - -# If this is set to true, Calamares refers to itself as a "setup program" -# rather than an "installer". Defaults to the value of dont-chroot, but -# Calamares will complain if this is not explicitly set. oem-setup: false - -# If this is set to true, the "Cancel" button will be disabled entirely. -# The button is also hidden from view. -# -# This can be useful if when e.g. Calamares is used as a post-install -# configuration tool and you require the user to go through all the -# configuration steps. -# -# Default is false, but Calamares will complain if this is not explicitly set. -# -# YAML: boolean. disable-cancel: false - -# If this is set to true, the "Cancel" button will be disabled once -# you start the 'Installation', meaning there won't be a way to cancel -# the Installation until it has finished or installation has failed. -# -# Default is false, but Calamares will complain if this is not explicitly set. -# -# YAML: boolean. disable-cancel-during-exec: false - -# If this is set to true, then once the end of the sequence has -# been reached, the quit (done) button is clicked automatically -# and Calamares will close. Default is false: the user will see -# that the end of installation has been reached, and that things are ok. -# -# +hide-back-and-next-during-exec: false quit-at-end: false -- cgit v1.2.3