From 05e19c5517a36fa78707b8674e83e6268b0efc6b Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Tue, 25 Dec 2018 11:03:46 +0000 Subject: drop our Qt5 ebuilds, use the ones from Gentoo --- eclass/qt5-build-r10000.eclass | 862 ----------------------------------------- 1 file changed, 862 deletions(-) delete mode 100644 eclass/qt5-build-r10000.eclass (limited to 'eclass/qt5-build-r10000.eclass') diff --git a/eclass/qt5-build-r10000.eclass b/eclass/qt5-build-r10000.eclass deleted file mode 100644 index 6cb8c2df..00000000 --- a/eclass/qt5-build-r10000.eclass +++ /dev/null @@ -1,862 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -# @ECLASS: qt5-build-r10000.eclass -# @MAINTAINER: -# qt@gentoo.org -# @AUTHOR: -# Davide Pesavento -# @SUPPORTED_EAPIS: 6 -# @BLURB: Eclass for Qt5 split ebuilds. -# @DESCRIPTION: -# This eclass contains various functions that are used when building Qt5. -# Requires EAPI 6. - -if [[ ${CATEGORY} != dev-qt ]]; then - die "qt5-build-r10000.eclass is only to be used for building Qt 5." -fi - -case ${EAPI} in - 6) : ;; - *) die "qt5-build-r10000.eclass: unsupported EAPI=${EAPI:-0}" ;; -esac - -# @ECLASS-VARIABLE: QT5_MODULE -# @PRE_INHERIT -# @DESCRIPTION: -# The upstream name of the module this package belongs to. Used for -# SRC_URI and EGIT_REPO_URI. Must be set before inheriting the eclass. -: ${QT5_MODULE:=${PN}} - -# @ECLASS-VARIABLE: QT5_TARGET_SUBDIRS -# @DEFAULT_UNSET -# @DESCRIPTION: -# Array variable containing the source directories that should be built. -# All paths must be relative to ${S}. - -# @ECLASS-VARIABLE: QT5_GENTOO_CONFIG -# @DEFAULT_UNSET -# @DESCRIPTION: -# Array of triplets that are evaluated in src_install -# to generate the per-package list of enabled QT_CONFIG features and macro -# definitions, which are then merged together with all other Qt5 packages -# installed on the system to obtain the global qconfig.{h,pri} files. - -# @ECLASS-VARIABLE: VIRTUALX_REQUIRED -# @DESCRIPTION: -# For proper description see virtualx.eclass man page. -# Here we redefine default value to be manual, if your package needs virtualx -# for tests you should proceed with setting VIRTUALX_REQUIRED=test. -: ${VIRTUALX_REQUIRED:=manual} - -inherit estack flag-o-matic ltprune toolchain-funcs versionator virtualx - -HOMEPAGE="https://www.qt.io/" -LICENSE="|| ( GPL-2 GPL-3 LGPL-3 ) FDL-1.3" -SLOT=5/$(get_version_component_range 1-2) - -QT5_MINOR_VERSION=$(get_version_component_range 2) -QT5_PATCH_VERSION=$(get_version_component_range 3) -readonly QT5_MINOR_VERSION QT5_PATCH_VERSION - -case ${PV} in - 5.9999) - # git dev branch - QT5_BUILD_TYPE="live" - EGIT_BRANCH="dev" - ;; - 5.?.9999|5.??.9999|5.???.9999) - # git stable branch - QT5_BUILD_TYPE="live" - EGIT_BRANCH=${PV%.9999} - ;; - *_alpha*|*_beta*|*_rc*) - # development release - QT5_BUILD_TYPE="release" - - if [[ ${QT5_MINOR_VERSION} -ge 10 ]]; then - MY_P=${QT5_MODULE}-everywhere-src-${PV/_/-} - else - MY_P=${QT5_MODULE}-opensource-src-${PV/_/-} - fi - - SRC_URI="https://download.qt.io/development_releases/qt/${PV%.*}/${PV/_/-}/submodules/${MY_P}.tar.xz" - S=${WORKDIR}/${MY_P} - ;; - *) - # official stable release - QT5_BUILD_TYPE="release" - - if [[ ${QT5_MINOR_VERSION} -ge 10 ]]; then - MY_P=${QT5_MODULE}-everywhere-src-${PV} - else - MY_P=${QT5_MODULE}-opensource-src-${PV} - fi - - SRC_URI="https://download.qt.io/official_releases/qt/${PV%.*}/${PV}/submodules/${MY_P}.tar.xz" - S=${WORKDIR}/${MY_P} - ;; -esac -readonly QT5_BUILD_TYPE - -EGIT_REPO_URI=( - "https://code.qt.io/qt/${QT5_MODULE}.git" - "https://github.com/qt/${QT5_MODULE}.git" -) -[[ ${QT5_BUILD_TYPE} == live ]] && inherit git-r3 - -# @ECLASS-VARIABLE: QT5_BUILD_DIR -# @OUTPUT_VARIABLE -# @DESCRIPTION: -# Build directory for out-of-source builds. -case ${QT5_BUILD_TYPE} in - live) : ${QT5_BUILD_DIR:=${S}_build} ;; - release) : ${QT5_BUILD_DIR:=${S}} ;; # workaround for bug 497312 -esac - -IUSE="debug test" - -[[ ${PN} == qtwebkit ]] && RESTRICT+=" mirror" # bug 524584 -[[ ${QT5_BUILD_TYPE} == release ]] && RESTRICT+=" test" # bug 457182 - -DEPEND=" - dev-lang/perl - virtual/pkgconfig -" -if [[ (${PN} != qttest && ${PN} != qtwebkit) || (${PN} == qtwebkit && ${QT5_MINOR_VERSION} -lt 9) ]]; then - DEPEND+=" test? ( ~dev-qt/qttest-${PV} )" -fi -RDEPEND=" - dev-qt/qtchooser -" - - -###### Phase functions ###### - -EXPORT_FUNCTIONS src_unpack src_prepare src_configure src_compile src_install src_test pkg_postinst pkg_postrm - -# @FUNCTION: qt5-build-r10000_src_unpack -# @DESCRIPTION: -# Unpacks the sources. -qt5-build-r10000_src_unpack() { - if tc-is-gcc; then - local min_gcc4_minor_version=7 - if [[ $(gcc-major-version) -lt 4 ]] || \ - [[ $(gcc-major-version) -eq 4 && $(gcc-minor-version) -lt ${min_gcc4_minor_version} ]]; then - eerror "GCC version 4.${min_gcc4_minor_version} or later is required to build this package" - die "GCC 4.${min_gcc4_minor_version} or later required" - fi - fi - - # bug 307861 - if [[ ${PN} == qtwebengine || ${PN} == qtwebkit ]]; then - eshopts_push -s extglob - if is-flagq '-g?(gdb)?([1-9])'; then - ewarn - ewarn "You have enabled debug info (probably have -g or -ggdb in your CFLAGS/CXXFLAGS)." - ewarn "You may experience really long compilation times and/or increased memory usage." - ewarn "If compilation fails, please try removing -g/-ggdb before reporting a bug." - ewarn - fi - eshopts_pop - fi - - case ${QT5_BUILD_TYPE} in - live) git-r3_src_unpack ;; - release) default ;; - esac -} - -# @FUNCTION: qt5-build-r10000_src_prepare -# @DESCRIPTION: -# Prepares the environment and patches the sources if necessary. -qt5-build-r10000_src_prepare() { - qt5_prepare_env - - if [[ ${QT5_MODULE} == qtbase ]]; then - qt5_symlink_tools_to_build_dir - - # Avoid unnecessary qmake recompilations - if [[ ${QT5_MINOR_VERSION} -ge 8 ]]; then - sed -i -e "/Creating qmake/i if [ '!' -e \"\$outpath/bin/qmake\" ]; then" \ - -e '/echo "Done."/a fi' \ - configure || die "sed failed (skip qmake bootstrap)" - else - sed -i -re "s|^if true;.*(\[ '\!').*(\"\\\$outpath/bin/qmake\".*)|if \1 -e \2 then|" \ - configure || die "sed failed (skip qmake bootstrap)" - fi - - # Respect CC, CXX, *FLAGS, MAKEOPTS and EXTRA_EMAKE when bootstrapping qmake - sed -i -e "/outpath\/qmake\".*\"\$MAKE\")/ s:): \ - ${MAKEOPTS} ${EXTRA_EMAKE} 'CC=$(tc-getCC)' 'CXX=$(tc-getCXX)' \ - 'QMAKE_CFLAGS=${CFLAGS}' 'QMAKE_CXXFLAGS=${CXXFLAGS}' 'QMAKE_LFLAGS=${LDFLAGS}'&:" \ - -e 's/\(setBootstrapVariable\s\+\|EXTRA_C\(XX\)\?FLAGS=.*\)QMAKE_C\(XX\)\?FLAGS_\(DEBUG\|RELEASE\).*/:/' \ - configure || die "sed failed (respect env for qmake build)" - sed -i -e '/^CPPFLAGS\s*=/ s/-g //' \ - qmake/Makefile.unix || die "sed failed (CPPFLAGS for qmake build)" - - # Respect CXX in bsymbolic_functions, fvisibility, precomp, and a few other tests - sed -i -e "/^QMAKE_CONF_COMPILER=/ s:=.*:=\"$(tc-getCXX)\":" \ - configure || die "sed failed (QMAKE_CONF_COMPILER)" - - if [[ ${QT5_MINOR_VERSION} -le 7 ]]; then - # Respect toolchain and flags in config.tests - find config.tests/unix -name '*.test' -type f -execdir \ - sed -i -e 's/-nocache //' '{}' + || die - fi - - # Don't inject -msse/-mavx/... into CXXFLAGS when detecting - # compiler support for extended instruction sets (bug 552942) - find config.tests/common -name '*.pro' -type f -execdir \ - sed -i -e '/QMAKE_CXXFLAGS\s*+=/ d' '{}' + || die - - # Don't add -O3 to CXXFLAGS (bug 549140) - sed -i -e '/CONFIG\s*+=/ s/optimize_full//' \ - src/{corelib/corelib,gui/gui}.pro || die "sed failed (optimize_full)" - - # Respect build variables in configure tests (bug #639494) - if [[ ${QT5_MINOR_VERSION} -ge 9 ]]; then - sed -i -e "s|\"\$outpath/bin/qmake\" \"\$relpathMangled\" -- \"\$@\"|& $(qt5_qmake_args) |" configure || die - fi - fi - - default -} - -# @FUNCTION: qt5-build-r10000_src_configure -# @DESCRIPTION: -# Runs qmake in the target directories. For packages -# in qtbase, ./configure is also run before qmake. -qt5-build-r10000_src_configure() { - if [[ ${QT5_MODULE} == qtbase ]]; then - qt5_base_configure - fi - - qt5_foreach_target_subdir qt5_qmake -} - -# @FUNCTION: qt5-build-r10000_src_compile -# @DESCRIPTION: -# Runs emake in the target directories. -qt5-build-r10000_src_compile() { - qt5_foreach_target_subdir emake -} - -# @FUNCTION: qt5-build-r10000_src_test -# @DESCRIPTION: -# Runs tests in the target directories. -qt5-build-r10000_src_test() { - # disable broken cmake tests (bug 474004) - local myqmakeargs=("${myqmakeargs[@]}" -after SUBDIRS-=cmake SUBDIRS-=installed_cmake) - - qt5_foreach_target_subdir qt5_qmake - qt5_foreach_target_subdir emake - - # create a custom testrunner script that correctly sets - # LD_LIBRARY_PATH before executing the given test - local testrunner=${QT5_BUILD_DIR}/gentoo-testrunner - cat > "${testrunner}" <<-_EOF_ || die - #!/bin/sh - export LD_LIBRARY_PATH="${QT5_BUILD_DIR}/lib:${QT5_LIBDIR}" - "\$@" - _EOF_ - chmod +x "${testrunner}" - - set -- qt5_foreach_target_subdir emake TESTRUNNER="'${testrunner}'" check - if [[ ${VIRTUALX_REQUIRED} == test ]]; then - virtx "$@" - else - "$@" - fi -} - -# @FUNCTION: qt5-build-r10000_src_install -# @DESCRIPTION: -# Runs emake install in the target directories. -qt5-build-r10000_src_install() { - qt5_foreach_target_subdir emake INSTALL_ROOT="${D}" install - - if [[ ${PN} == qtcore ]]; then - pushd "${QT5_BUILD_DIR}" >/dev/null || die - - set -- emake INSTALL_ROOT="${D}" \ - sub-qmake-qmake-aux-pro-install_subtargets \ - install_{syncqt,mkspecs} - - einfo "Running $*" - "$@" - - popd >/dev/null || die - - docompress -x "${QT5_DOCDIR#${EPREFIX}}"/global - - # install an empty Gentoo/gentoo-qconfig.h in ${D} - # so that it's placed under package manager control - > "${T}"/gentoo-qconfig.h - ( - insinto "${QT5_HEADERDIR#${EPREFIX}}"/Gentoo - doins "${T}"/gentoo-qconfig.h - ) - - # include gentoo-qconfig.h at the beginning of QtCore/qconfig.h - sed -i -e '1i #include \n' \ - "${D}${QT5_HEADERDIR}"/QtCore/qconfig.h \ - || die "sed failed (qconfig.h)" - - # install qtchooser configuration file - cat > "${T}/qt5-${CHOST}.conf" <<-_EOF_ || die - ${QT5_BINDIR} - ${QT5_LIBDIR} - _EOF_ - - ( - insinto /etc/xdg/qtchooser - doins "${T}/qt5-${CHOST}.conf" - ) - - # convenience symlinks - dosym qt5-"${CHOST}".conf /etc/xdg/qtchooser/5.conf - dosym qt5-"${CHOST}".conf /etc/xdg/qtchooser/qt5.conf - fi - - qt5_install_module_qconfigs - prune_libtool_files -} - -# @FUNCTION: qt5-build-r10000_pkg_postinst -# @DESCRIPTION: -# Regenerate configuration after installation or upgrade/downgrade. -qt5-build-r10000_pkg_postinst() { - qt5_regenerate_global_qconfigs -} - -# @FUNCTION: qt5-build-r10000_pkg_postrm -# @DESCRIPTION: -# Regenerate configuration when a module is completely removed. -qt5-build-r10000_pkg_postrm() { - if [[ -z ${REPLACED_BY_VERSION} && ${PN} != qtcore ]]; then - qt5_regenerate_global_qconfigs - fi -} - - -###### Public helpers ###### - -# @FUNCTION: qt_use -# @USAGE: [feature] [enableval] -# @DESCRIPTION: -# is the name of a flag in IUSE. -# -# Outputs "-${enableval}-${feature}" if is enabled, "-no-${feature}" -# otherwise. If [feature] is not specified, is used in its place. -# If [enableval] is not specified, the "-${enableval}" prefix is omitted. -qt_use() { - [[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument" - - usex "$1" "${3:+-$3}-${2:-$1}" "-no-${2:-$1}" -} - -# @FUNCTION: qt_use_compile_test -# @USAGE: [config] -# @DESCRIPTION: -# is the name of a flag in IUSE. -# [config] is the argument of qtCompileTest, defaults to . -# -# This function is useful to disable optional dependencies that are checked -# at qmake-time using the qtCompileTest() function. If is disabled, -# the compile test is skipped and the dependency is assumed to be unavailable, -# i.e. the corresponding feature will be disabled. Note that all invocations -# of this function must happen before calling qt5-build-r10000_src_configure. -qt_use_compile_test() { - [[ $# -ge 1 ]] || die "${FUNCNAME}() requires at least one argument" - - if ! use "$1"; then - mkdir -p "${QT5_BUILD_DIR}" || die - echo "CONFIG += done_config_${2:-$1}" >> "${QT5_BUILD_DIR}"/.qmake.cache || die - fi -} - -# @FUNCTION: qt_use_disable_config -# @USAGE: -# @DESCRIPTION: -# is the name of a flag in IUSE. -# is the (lowercase) name of a Qt5 config entry. -# is a list of one or more qmake project files. -# -# This function patches to treat as disabled -# when is disabled, otherwise it does nothing. -# This can be useful to avoid an automagic dependency when the config entry -# is enabled on the system but the corresponding USE flag is disabled. -qt_use_disable_config() { - [[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments" - - local flag=$1 - local config=$2 - shift 2 - - if ! use "${flag}"; then - echo "$@" | xargs sed -i -e "s/qtConfig(${config})/false/g" || die - fi -} - -# @FUNCTION: qt_use_disable_mod -# @USAGE: -# @DESCRIPTION: -# is the name of a flag in IUSE. -# is the (lowercase) name of a Qt5 module. -# is a list of one or more qmake project files. -# -# This function patches to treat as not installed -# when is disabled, otherwise it does nothing. -# This can be useful to avoid an automagic dependency when the module -# is present on the system but the corresponding USE flag is disabled. -qt_use_disable_mod() { - [[ $# -ge 3 ]] || die "${FUNCNAME}() requires at least three arguments" - - local flag=$1 - local module=$2 - shift 2 - - if ! use "${flag}"; then - echo "$@" | xargs sed -i -e "s/qtHaveModule(${module})/false/g" || die - fi -} - - -###### Internal functions ###### - -# @FUNCTION: qt5_prepare_env -# @INTERNAL -# @DESCRIPTION: -# Prepares the environment for building Qt. -qt5_prepare_env() { - # setup installation directories - # note: keep paths in sync with qmake-utils.eclass - QT5_PREFIX=${EPREFIX}/usr - QT5_HEADERDIR=${QT5_PREFIX}/include/qt5 - QT5_LIBDIR=${QT5_PREFIX}/$(get_libdir) - QT5_ARCHDATADIR=${QT5_PREFIX}/$(get_libdir)/qt5 - QT5_BINDIR=${QT5_ARCHDATADIR}/bin - QT5_PLUGINDIR=${QT5_ARCHDATADIR}/plugins - QT5_LIBEXECDIR=${QT5_ARCHDATADIR}/libexec - QT5_IMPORTDIR=${QT5_ARCHDATADIR}/imports - QT5_QMLDIR=${QT5_ARCHDATADIR}/qml - QT5_DATADIR=${QT5_PREFIX}/share/qt5 - QT5_DOCDIR=${QT5_PREFIX}/share/doc/qt-${PV} - QT5_TRANSLATIONDIR=${QT5_DATADIR}/translations - QT5_EXAMPLESDIR=${QT5_DATADIR}/examples - QT5_TESTSDIR=${QT5_DATADIR}/tests - QT5_SYSCONFDIR=${EPREFIX}/etc/xdg - readonly QT5_PREFIX QT5_HEADERDIR QT5_LIBDIR QT5_ARCHDATADIR \ - QT5_BINDIR QT5_PLUGINDIR QT5_LIBEXECDIR QT5_IMPORTDIR \ - QT5_QMLDIR QT5_DATADIR QT5_DOCDIR QT5_TRANSLATIONDIR \ - QT5_EXAMPLESDIR QT5_TESTSDIR QT5_SYSCONFDIR - - if [[ ${QT5_MODULE} == qtbase ]]; then - # see mkspecs/features/qt_config.prf - export QMAKEMODULES="${QT5_BUILD_DIR}/mkspecs/modules:${S}/mkspecs/modules:${QT5_ARCHDATADIR}/mkspecs/modules" - fi -} - -# @FUNCTION: qt5_foreach_target_subdir -# @INTERNAL -# @DESCRIPTION: -# Executes the command given as argument from inside each directory -# listed in QT5_TARGET_SUBDIRS. Handles autotests subdirs automatically. -qt5_foreach_target_subdir() { - [[ -z ${QT5_TARGET_SUBDIRS[@]} ]] && QT5_TARGET_SUBDIRS=("") - - local subdir= - for subdir in "${QT5_TARGET_SUBDIRS[@]}"; do - if [[ ${EBUILD_PHASE} == test ]]; then - subdir=tests/auto${subdir#src} - [[ -d ${S}/${subdir} ]] || continue - fi - - local msg="Running $* ${subdir:+in ${subdir}}" - einfo "${msg}" - - mkdir -p "${QT5_BUILD_DIR}/${subdir}" || die -n || return $? - pushd "${QT5_BUILD_DIR}/${subdir}" >/dev/null || die -n || return $? - - "$@" || die -n "${msg} failed" || return $? - - popd >/dev/null || die -n || return $? - done -} - -# @FUNCTION: qt5_symlink_tools_to_build_dir -# @INTERNAL -# @DESCRIPTION: -# Symlinks qmake and a few other tools to QT5_BUILD_DIR, -# so that they can be used when building other modules. -qt5_symlink_tools_to_build_dir() { - local tool= tools=() - if [[ ${PN} != qtcore ]]; then - tools+=(qmake moc rcc qlalr) - [[ ${PN} != qtdbus ]] && tools+=(qdbuscpp2xml qdbusxml2cpp) - [[ ${PN} != qtwidgets ]] && tools+=(uic) - fi - - mkdir -p "${QT5_BUILD_DIR}"/bin || die - pushd "${QT5_BUILD_DIR}"/bin >/dev/null || die - - for tool in "${tools[@]}"; do - [[ -e ${QT5_BINDIR}/${tool} ]] || continue - ln -s "${QT5_BINDIR}/${tool}" . || die "failed to symlink ${tool}" - done - - popd >/dev/null || die -} - -# @FUNCTION: qt5_base_configure -# @INTERNAL -# @DESCRIPTION: -# Runs ./configure for modules belonging to qtbase. -qt5_base_configure() { - # setup toolchain variables used by configure - tc-export AR CC CXX OBJDUMP RANLIB STRIP - export LD="$(tc-getCXX)" - - # bug 633838 - if [[ ${QT5_MINOR_VERSION} -ge 9 ]]; then - unset QMAKESPEC XQMAKESPEC QMAKEPATH QMAKEFEATURES - fi - - # configure arguments - local conf=( - # installation paths - -prefix "${QT5_PREFIX}" - -bindir "${QT5_BINDIR}" - -headerdir "${QT5_HEADERDIR}" - -libdir "${QT5_LIBDIR}" - -archdatadir "${QT5_ARCHDATADIR}" - -plugindir "${QT5_PLUGINDIR}" - -libexecdir "${QT5_LIBEXECDIR}" - -importdir "${QT5_IMPORTDIR}" - -qmldir "${QT5_QMLDIR}" - -datadir "${QT5_DATADIR}" - -docdir "${QT5_DOCDIR}" - -translationdir "${QT5_TRANSLATIONDIR}" - -sysconfdir "${QT5_SYSCONFDIR}" - -examplesdir "${QT5_EXAMPLESDIR}" - -testsdir "${QT5_TESTSDIR}" - - # configure in release mode by default, - # override via the CONFIG qmake variable - -release - -no-separate-debug-info - - # no need to forcefully build host tools in optimized mode, - # just follow the overall debug/release build type - -no-optimized-tools - - # licensing stuff - -opensource -confirm-license - - # autodetect the highest supported version of the C++ standard - #-c++std - - # build shared libraries - -shared - - # always enable large file support - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -largefile) - - # disabling accessibility is not recommended by upstream, as - # it will break QStyle and may break other internal parts of Qt - -accessibility - - # disable all SQL drivers by default, override in qtsql - -no-sql-db2 -no-sql-ibase -no-sql-mysql -no-sql-oci -no-sql-odbc - -no-sql-psql -no-sql-sqlite -no-sql-sqlite2 -no-sql-tds - - # ensure the QML debugging support (qmltooling) is built in qtdeclarative - $([[ ${QT5_MINOR_VERSION} -lt 11 ]] && echo -qml-debug) - - # MIPS DSP instruction set extensions - $(is-flagq -mno-dsp && echo -no-mips_dsp) - $(is-flagq -mno-dspr2 && echo -no-mips_dspr2) - - # use pkg-config to detect include and library paths - -pkg-config - - # prefer system libraries (only common hard deps here) - -system-zlib - -system-pcre - -system-doubleconversion - - # disable everything to prevent automagic deps (part 1) - -no-mtdev - -no-journald -no-syslog - -no-libpng -no-libjpeg - -no-freetype -no-harfbuzz - -no-openssl -no-libproxy - -no-xkbcommon-x11 -no-xkbcommon-evdev - -no-xinput2 -no-xcb-xlib - - # cannot use -no-gif because there is no way to override it later - #-no-gif - - # always enable glib event loop support - -glib - - # disable everything to prevent automagic deps (part 2) - -no-gtk - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-pulseaudio -no-alsa) - - # exclude examples and tests from default build - -nomake examples - -nomake tests - -no-compile-examples - - # disable rpath on non-prefix (bugs 380415 and 417169) - $(usex prefix '' -no-rpath) - - # print verbose information about each configure test - -verbose - - # always enable iconv support - # since 5.8 this is handled in qtcore - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -iconv) - - # disable everything to prevent automagic deps (part 3) - -no-cups -no-evdev -no-tslib -no-icu -no-fontconfig -no-dbus - - # let portage handle stripping - -no-strip - - # precompiled headers can cause problems on hardened, so turn them off - -no-pch - - # link-time code generation is not something we want to enable by default - -no-ltcg - - # reduced relocations cause major breakage on at least arm and ppc, so - # don't specify anything and let the configure figure out if they are - # supported; see also https://bugreports.qt.io/browse/QTBUG-36129 - #-reduce-relocations - - # use the system linker (gold will be selected automagically otherwise) - $(tc-ld-is-gold && echo -use-gold-linker || echo -no-use-gold-linker) - - # disable all platform plugins by default, override in qtgui - -no-xcb -no-eglfs -no-kms -no-gbm -no-directfb -no-linuxfb -no-mirclient - - # disable undocumented X11-related flags, override in qtgui - # (not shown in ./configure -help output) - -no-xkb - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-xrender) - - # disable obsolete/unused X11-related flags - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-mitshm -no-xcursor -no-xfixes -no-xrandr -no-xshape -no-xsync) - - # always enable session management support: it doesn't need extra deps - # at configure time and turning it off is dangerous, see bug 518262 - -sm - - # typedef qreal to double (warning: changing this flag breaks the ABI) - -qreal double - - # disable OpenGL and EGL support by default, override in qtgui, - # qtopengl, qtprintsupport and qtwidgets - -no-opengl -no-egl - - # disable libinput-based generic plugin by default, override in qtgui - -no-libinput - - # disable gstreamer by default, override in qtmultimedia - $([[ ${QT5_MINOR_VERSION} -lt 8 ]] && echo -no-gstreamer) - - # respect system proxies by default: it's the most natural - # setting, and it'll become the new upstream default in 5.8 - -system-proxies - - # do not build with -Werror - -no-warnings-are-errors - - # module-specific options - "${myconf[@]}" - ) - - pushd "${QT5_BUILD_DIR}" >/dev/null || die - - einfo "Configuring with: ${conf[@]}" - "${S}"/configure "${conf[@]}" || die "configure failed" - - if [[ ${QT5_MINOR_VERSION} -ge 8 ]]; then - # a forwarding header is no longer created since 5.8, causing the system - # config to always be used. bug 599636 - cp src/corelib/global/qconfig.h include/QtCore/ || die - fi - - popd >/dev/null || die - -} - -# @FUNCTION: qt5_qmake_args -# @INTERNAL -# @DESCRIPTION: -# Helper function to get the various toolchain-related variables. -qt5_qmake_args() { - echo \ - QMAKE_AR=\"$(tc-getAR)\" \ - QMAKE_CC=\"$(tc-getCC)\" \ - QMAKE_LINK_C=\"$(tc-getCC)\" \ - QMAKE_LINK_C_SHLIB=\"$(tc-getCC)\" \ - QMAKE_CXX=\"$(tc-getCXX)\" \ - QMAKE_LINK=\"$(tc-getCXX)\" \ - QMAKE_LINK_SHLIB=\"$(tc-getCXX)\" \ - QMAKE_OBJCOPY=\"$(tc-getOBJCOPY)\" \ - QMAKE_RANLIB= \ - QMAKE_STRIP=\"$(tc-getSTRIP)\" \ - QMAKE_CFLAGS=\"${CFLAGS}\" \ - QMAKE_CFLAGS_RELEASE= \ - QMAKE_CFLAGS_DEBUG= \ - QMAKE_CXXFLAGS=\"${CXXFLAGS}\" \ - QMAKE_CXXFLAGS_RELEASE= \ - QMAKE_CXXFLAGS_DEBUG= \ - QMAKE_LFLAGS=\"${LDFLAGS}\" \ - QMAKE_LFLAGS_RELEASE= \ - QMAKE_LFLAGS_DEBUG= -} - -# @FUNCTION: qt5_qmake -# @INTERNAL -# @DESCRIPTION: -# Helper function that runs qmake in the current target subdir. -# Intended to be called by qt5_foreach_target_subdir(). -qt5_qmake() { - local projectdir=${PWD/#${QT5_BUILD_DIR}/${S}} - local qmakepath= - if [[ ${QT5_MODULE} == qtbase ]]; then - qmakepath=${QT5_BUILD_DIR}/bin - else - qmakepath=${QT5_BINDIR} - fi - - "${qmakepath}"/qmake \ - "${projectdir}" \ - CONFIG+=$(usex debug debug release) \ - CONFIG-=$(usex debug release debug) \ - QMAKE_AR="$(tc-getAR) cqs" \ - QMAKE_CC="$(tc-getCC)" \ - QMAKE_LINK_C="$(tc-getCC)" \ - QMAKE_LINK_C_SHLIB="$(tc-getCC)" \ - QMAKE_CXX="$(tc-getCXX)" \ - QMAKE_LINK="$(tc-getCXX)" \ - QMAKE_LINK_SHLIB="$(tc-getCXX)" \ - QMAKE_OBJCOPY="$(tc-getOBJCOPY)" \ - QMAKE_RANLIB= \ - QMAKE_STRIP="$(tc-getSTRIP)" \ - QMAKE_CFLAGS="${CFLAGS}" \ - QMAKE_CFLAGS_RELEASE= \ - QMAKE_CFLAGS_DEBUG= \ - QMAKE_CXXFLAGS="${CXXFLAGS}" \ - QMAKE_CXXFLAGS_RELEASE= \ - QMAKE_CXXFLAGS_DEBUG= \ - QMAKE_LFLAGS="${LDFLAGS}" \ - QMAKE_LFLAGS_RELEASE= \ - QMAKE_LFLAGS_DEBUG= \ - "${myqmakeargs[@]}" \ - || die "qmake failed (${projectdir#${S}/})" -} - -# @FUNCTION: qt5_install_module_qconfigs -# @INTERNAL -# @DESCRIPTION: -# Creates and installs gentoo-specific ${PN}-qconfig.{h,pri} files. -qt5_install_module_qconfigs() { - local x qconfig_add= qconfig_remove= - - > "${T}"/${PN}-qconfig.h - > "${T}"/${PN}-qconfig.pri - - # generate qconfig_{add,remove} and ${PN}-qconfig.h - for x in "${QT5_GENTOO_CONFIG[@]}"; do - local flag=${x%%:*} - x=${x#${flag}:} - local feature=${x%%:*} - x=${x#${feature}:} - local macro=${x} - macro=$(tr 'a-z-' 'A-Z_' <<< "${macro}") - - if [[ -z ${flag} ]] || { [[ ${flag} != '!' ]] && use ${flag}; }; then - [[ -n ${feature} ]] && qconfig_add+=" ${feature}" - [[ -n ${macro} ]] && echo "#define QT_${macro}" >> "${T}"/${PN}-qconfig.h - else - [[ -n ${feature} ]] && qconfig_remove+=" ${feature}" - [[ -n ${macro} ]] && echo "#define QT_NO_${macro}" >> "${T}"/${PN}-qconfig.h - fi - done - - # install ${PN}-qconfig.h - [[ -s ${T}/${PN}-qconfig.h ]] && ( - insinto "${QT5_HEADERDIR#${EPREFIX}}"/Gentoo - doins "${T}"/${PN}-qconfig.h - ) - - # generate and install ${PN}-qconfig.pri - [[ -n ${qconfig_add} ]] && echo "QCONFIG_ADD=${qconfig_add}" >> "${T}"/${PN}-qconfig.pri - [[ -n ${qconfig_remove} ]] && echo "QCONFIG_REMOVE=${qconfig_remove}" >> "${T}"/${PN}-qconfig.pri - [[ -s ${T}/${PN}-qconfig.pri ]] && ( - insinto "${QT5_ARCHDATADIR#${EPREFIX}}"/mkspecs/gentoo - doins "${T}"/${PN}-qconfig.pri - ) - - if [[ ${PN} = qtcore && ${QT5_MINOR_VERSION} -ge 9 ]]; then - insinto "${QT5_ARCHDATADIR#${EPREFIX}}"/mkspecs/gentoo - newins "${D}${QT5_ARCHDATADIR#${EPREFIX}}"/mkspecs/qconfig.pri qconfig-qtcore.pri - fi -} - -# @FUNCTION: qt5_regenerate_global_qconfigs -# @INTERNAL -# @DESCRIPTION: -# Generates Gentoo-specific qconfig.{h,pri} according to the build configuration. -# Don't call die here because dying in pkg_post{inst,rm} only makes things worse. -qt5_regenerate_global_qconfigs() { - einfo "Regenerating gentoo-qconfig.h" - - find "${ROOT%/}${QT5_HEADERDIR}"/Gentoo \ - -name '*-qconfig.h' -a \! -name 'gentoo-qconfig.h' -type f \ - -execdir cat '{}' + | sort -u > "${T}"/gentoo-qconfig.h - - [[ -s ${T}/gentoo-qconfig.h ]] || ewarn "Generated gentoo-qconfig.h is empty" - mv -f "${T}"/gentoo-qconfig.h "${ROOT%/}${QT5_HEADERDIR}"/Gentoo/gentoo-qconfig.h \ - || eerror "Failed to install new gentoo-qconfig.h" - - einfo "Updating QT_CONFIG in qconfig.pri" - - local qconfig_pri=${ROOT%/}${QT5_ARCHDATADIR}/mkspecs/qconfig.pri - local qconfig_pri_orig=${ROOT%/}${QT5_ARCHDATADIR}/mkspecs/gentoo/qconfig-qtcore.pri - if [[ -f ${qconfig_pri} ]]; then - local x qconfig_add= qconfig_remove= - if [[ -f ${qconfig_pri_orig} ]]; then - local qt_config=$(sed -n 's/^QT_CONFIG\s*+=\s*//p' "${qconfig_pri_orig}") - else - local qt_config=$(sed -n 's/^QT_CONFIG\s*+=\s*//p' "${qconfig_pri}") - fi - local new_qt_config= - - # generate list of QT_CONFIG entries from the existing list, - # appending QCONFIG_ADD and excluding QCONFIG_REMOVE - eshopts_push -s nullglob - for x in "${ROOT%/}${QT5_ARCHDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do - qconfig_add+=" $(sed -n 's/^QCONFIG_ADD=\s*//p' "${x}")" - qconfig_remove+=" $(sed -n 's/^QCONFIG_REMOVE=\s*//p' "${x}")" - done - eshopts_pop - for x in ${qt_config} ${qconfig_add}; do - if ! has "${x}" ${new_qt_config} ${qconfig_remove}; then - new_qt_config+=" ${x}" - fi - done - - # now replace the existing QT_CONFIG with the generated list - sed -i -e "s/^QT_CONFIG\s*+=.*/QT_CONFIG +=${new_qt_config}/" \ - "${qconfig_pri}" || eerror "Failed to sed QT_CONFIG in ${qconfig_pri}" - else - ewarn "${qconfig_pri} or ${qconfig_pri_orig} does not exist or is not a regular file" - fi -} -- cgit v1.2.3