From 560ec0d226af8f0bad6bbe25a80b74c1b3ea6be1 Mon Sep 17 00:00:00 2001 From: V3n3RiX Date: Sun, 12 Feb 2023 09:23:42 +0000 Subject: sys-fs/zfs-utils : install openrc conf.d file --- sys-fs/zfs-utils/files/zfs-conf.d | 109 +++++++++++++++++++++++++++++ sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild | 13 ++-- 2 files changed, 114 insertions(+), 8 deletions(-) create mode 100644 sys-fs/zfs-utils/files/zfs-conf.d (limited to 'sys-fs/zfs-utils') diff --git a/sys-fs/zfs-utils/files/zfs-conf.d b/sys-fs/zfs-utils/files/zfs-conf.d new file mode 100644 index 00000000..af3ff9da --- /dev/null +++ b/sys-fs/zfs-utils/files/zfs-conf.d @@ -0,0 +1,109 @@ +# OpenZFS userland configuration. + +# NOTE: This file is intended for sysv init and initramfs. +# Changing some of these settings may not make any difference on +# systemd-based setup, e.g. setting ZFS_MOUNT=no will not prevent systemd +# from launching zfs-mount.service during boot. +# See: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901436 + +# To enable a boolean setting, set it to yes, on, true, or 1. +# Anything else will be interpreted as unset. + +# Run `zfs load-key` during system start? +ZFS_LOAD_KEY='yes' + +# Run `zfs unload-key` during system stop? +ZFS_UNLOAD_KEY='no' + +# Run `zfs mount -a` during system start? +ZFS_MOUNT='yes' + +# Run `zfs unmount -a` during system stop? +ZFS_UNMOUNT='no' + +# Run `zfs share -a` during system start? +# nb: The shareiscsi, sharenfs, and sharesmb dataset properties. +ZFS_SHARE='yes' + +# Run `zfs unshare -a` during system stop? +ZFS_UNSHARE='yes' + +# By default, a verbatim import of all pools is performed at boot based on the +# contents of the default zpool cache file. The contents of the cache are +# managed automatically by the 'zpool import' and 'zpool export' commands. +# +# By setting this to 'yes', the system will instead search all devices for +# pools and attempt to import them all at boot, even those that have been +# exported. Under this mode, the search path can be controlled by the +# ZPOOL_IMPORT_PATH variable and a list of pools that should not be imported +# can be listed in the ZFS_POOL_EXCEPTIONS variable. +# +# Note that importing all visible pools may include pools that you don't +# expect, such as those on removable devices and SANs, and those pools may +# proceed to mount themselves in places you do not want them to. The results +# can be unpredictable and possibly dangerous. Only enable this option if you +# understand this risk and have complete physical control over your system and +# SAN to prevent the insertion of malicious pools. +ZPOOL_IMPORT_ALL_VISIBLE='no' + +# Specify specific path(s) to look for device nodes and/or links for the +# pool import(s). See zpool(8) for more information about this variable. +# It supersedes the old USE_DISK_BY_ID which indicated that it would only +# try '/dev/disk/by-id'. +# The old variable will still work in the code, but is deprecated. +#ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:/dev/disk/by-id" + +# List of pools that should NOT be imported at boot +# when ZPOOL_IMPORT_ALL_VISIBLE is 'yes'. +# This is a space separated list. +#ZFS_POOL_EXCEPTIONS="test2" + +# Should the datasets be mounted verbosely? +# A mount counter will be used when mounting if set to 'yes'. +VERBOSE_MOUNT='no' + +# Should we allow overlay mounts? +# This is standard in Linux, but not ZFS which comes from Solaris where this +# is not allowed). +DO_OVERLAY_MOUNTS='no' + +# Any additional option to the 'zfs import' commandline? +# Include '-o' for each option wanted. +# You don't need to put '-f' in here, unless you want it ALL the time. +# Using the option 'zfsforce=1' on the grub/kernel command line will +# do the same, but on a case-to-case basis. +ZPOOL_IMPORT_OPTS="" + +# Full path to the ZFS cache file? +# See "cachefile" in zpool(8). +# The default is "/etc/zfs/zpool.cache". +#ZPOOL_CACHE="/etc/zfs/zpool.cache" +# +# Setting ZPOOL_CACHE to an empty string ('') AND setting ZPOOL_IMPORT_OPTS to +# "-c /etc/zfs/zpool.cache" will _enforce_ the use of a cache file. +# This is needed in some cases (extreme amounts of VDEVs, multipath etc). +# Generally, the use of a cache file is usually not recommended on Linux +# because it sometimes is more trouble than it's worth (laptops with external +# devices or when/if device nodes changes names). +#ZPOOL_IMPORT_OPTS="-c /etc/zfs/zpool.cache" +#ZPOOL_CACHE="" + +# Any additional option to the 'zfs mount' command line? +# Include '-o' for each option wanted. +MOUNT_EXTRA_OPTIONS="" + +# Build kernel modules with the --enable-debug switch? +# Only applicable for Debian GNU/Linux {dkms,initramfs}. +ZFS_DKMS_ENABLE_DEBUG='no' + +# Build kernel modules with the --enable-debuginfo switch? +# Only applicable for Debian GNU/Linux {dkms,initramfs}. +ZFS_DKMS_ENABLE_DEBUGINFO='no' + +# Keep debugging symbols in kernel modules? +# Only applicable for Debian GNU/Linux {dkms,initramfs}. +ZFS_DKMS_DISABLE_STRIP='no' + +# Optional arguments for the ZFS Event Daemon (ZED). +# See zed(8) for more information on available options. +#ZED_ARGS="-M" diff --git a/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild b/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild index c9038d0f..61e6b4c1 100644 --- a/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild +++ b/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild @@ -94,14 +94,11 @@ src_install() { default gen_usr_ldscript -a nvpair uutil zfsbootenv zfs zfs_core zpool - - use pam && { rm -rv "${ED}/unwanted_files" || die ; } - - use test-suite || { rm -r "${ED}/usr/share/zfs" || die ; } - dobashcomp contrib/bash_completion.d/zfs bashcomp_alias zfs zpool - - # strip executable bit from conf.d file - fperms 0644 /etc/conf.d/zfs + dodir etc/conf.d + insinto etc/conf.d + newins "${FILESDIR}"/zfs-conf.d zfs + use pam && { rm -rv "${ED}/unwanted_files" || die ; } + use test-suite || { rm -r "${ED}/usr/share/zfs" || die ; } } -- cgit v1.2.3