From 7224c1253228e5c29c78cb3f0f26ce34770f2356 Mon Sep 17 00:00:00 2001 From: BlackNoxis Date: Sat, 15 Feb 2014 23:24:26 +0200 Subject: Added ebuilds for kogaion desktop --- .../compat-drivers/compat-drivers-3.8.ebuild | 174 +++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 sys-kernel/compat-drivers/compat-drivers-3.8.ebuild (limited to 'sys-kernel/compat-drivers/compat-drivers-3.8.ebuild') diff --git a/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild b/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild new file mode 100644 index 00000000..ab7c1a96 --- /dev/null +++ b/sys-kernel/compat-drivers/compat-drivers-3.8.ebuild @@ -0,0 +1,174 @@ +# Copyright 1999-2013 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Header: $ + +EAPI="5" + +# USE_EXPAND categories +CPD_USE_EXPAND="wifi ethernet various" +# These are officially supported +CPD_USE_EXPAND_wifi="ath5k ath9k ath9k_ap ath9k_htc ath6kl b43 brcmsmac brcmfmac carl9170 rt2x00 wil6210 wl1251 wl12xx zd1211rw" + +# These are officially supported +CPD_USE_EXPAND_ethernet="alx atl1 atl1c atl1e atl2" + +# These are officially supported +CPD_USE_EXPAND_various="i915" + +inherit linux-mod linux-info versionator eutils compat-drivers-3.8-r1 + +# upstream versioning, ex.: 3.7-rc1-6 +UPSTREAM_PVR="${PV//_/-}" && UPSTREAM_PVR="${UPSTREAM_PVR/-p/-}" +# ex.: 3.7-rc1 +UPSTREAM_PV=${UPSTREAM_PVR%-*} + +DESCRIPTION="Stable kernel pre-release wifi subsystem backport" +HOMEPAGE="http://backports.wiki.kernel.org" +SRC_URI="mirror://kernel/linux/kernel/projects/backports/stable/v${UPSTREAM_PVR}/${PN}-${UPSTREAM_PVR}-1-u.tar.xz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="" + +IUSE="atheros_obey_crda debugfs debug-driver full-debug injection livecd loadmodules noleds pax_kernel" + +DEPEND="!net-wireless/compat-wireless-builder + !net-wireless/compat-wireless" +RDEPEND="${DEPEND} + >=sys-kernel/linux-firmware-20110219 + virtual/udev" + +S="${WORKDIR}/${PN}-${UPSTREAM_PVR}-1-u" + +RESTRICT="strip" + +CONFIG_CHECK="!DYNAMIC_FTRACE" + +pkg_setup() { + CONFIG_CHECK="~NET_SCHED" + CONFIG_CHECK="~IPW2200_PROMISCUOUS" + linux-mod_pkg_setup + kernel_is -lt 2 6 27 && die "kernel 2.6.27 or higher is required for compat drivers to be installed" + kernel_is -gt $(get_version_component_range 1) $(get_version_component_range 2) $(get_version_component_range 3) && die "The version of compat drivers you are trying to install contains older modules than your kernel. Failing before downgrading your system." + + #these things are not optional + linux_chkconfig_module MAC80211 || die "CONFIG_MAC80211 must be built as a _module_ !" + linux_chkconfig_module CFG80211 || die "CONFIG_CFG80211 must be built as a _module_ !" + linux_chkconfig_module LIBIPW || ewarn "CONFIG_LIBIPW really should be set or there will be no WEXT compat" + + if use compat_drivers_wifi_b43; then + linux_chkconfig_module SSB || die "You need to enable CONFIG_SSB or USE=-b43" + fi +} + +src_prepare() { + if use pax_kernel; then + for gpatch in "${FILESDIR}"/3.8-grsec/*; do + epatch "${gpatch}" + done + fi + # upstream might want to see this + epatch "${FILESDIR}"/${PN}-3.8-bt_tty.patch + epatch "${FILESDIR}"/${PN}-3.8-ath6kl.patch + + #mcgrof said prep for inclusion in compat-wireless.git but this causes issues + #find "${S}" -name Makefile | xargs sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' -e 's/CONFIG_COMPAT_CHECK/CONFIG_CHECK/' + #sed -i -e 's/export CONFIG_/export CONFIG_COMPAT_/' -e 's/COMPAT_COMPAT_/COMPAT_/' "${S}"/config.mk + + # CONFIG_CFG80211_REG_DEBUG=y + sed -i '/CFG80211_REG_DEBUG/s/^# *//' "${S}"/config.mk + + #this patch ignores the regulatory settings of an atheros card and uses what CRDA thinks is right + if use atheros_obey_crda; then + ewarn "You have enabled atheros_obey_crda which doesn't do what you think." + ewarn "This use flag will cause the eeprom of the card to be ignored and force" + ewarn "world roaming on the device until crda provides a valid regdomain." + ewarn "Short version, this is not a way to break the law, this will automatically" + ewarn "make your card less functional unless you set a proper regdomain with iw/crda." + epatch "${FILESDIR}"/ath_regd_optional.patch + fi + + if use injection; then + epatch "${FILESDIR}"/4002_mac80211-2.6.29-fix-tx-ctl-no-ack-retry-count.patch + epatch "${FILESDIR}"/4004_zd1211rw-2.6.28.patch + # epatch "${FILESDIR}"/mac80211.compat08082009.wl_frag+ack_v1.patch + # epatch "${FILESDIR}"/4013-runtime-enable-disable-of-mac80211-packet-injection.patch + epatch "${FILESDIR}"/ipw2200-inject.3.4.6.patch + fi + if use noleds; then + sed -ir 's/^\(export CONFIG_.*_LEDS=\)y$/\1n/' config.mk + epatch "${FILESDIR}/leds-disable-strict-${PV}.patch" + fi + use debug-driver && sed -i '/DEBUG=y/s/^# *//' "${S}"/config.mk + use debugfs && sed -i '/DEBUGFS/s/^# *//' "${S}"/config.mk + if use full-debug; then + if use debug-driver ; then + sed -i '/CONFIG=/s/^# *//' "${S}"/config.mk + else + ewarn "Enabling full-debug includes debug-driver." + sed -i '/DEBUG=/s/^# *//' "${S}"/config.mk + fi + fi + + #avoid annoying ACCESS DENIED sandbox errors + sed -i "s/\${MAKE} -C \${KLIB_BUILD} kernelversion/echo ${KV_FULL}/g" compat/scripts/gen-compat-config.sh || die "sed failed" + sed -i "s/shell \$(MAKE) -C \$(KLIB_BUILD) kernelversion/echo ${KV_FULL}/g" config.mk || die "sed failed" + sed -i "s/make -C \$KLIB_BUILD kernelversion/echo ${KV_FULL}/g" scripts/gen-compat-autoconf.sh || die "sed failed" + + # replace scripts/driver-select + # TODO: convince upstream to adopt this script + cp "${FILESDIR}/${PF}-driver-select" scripts/driver-select || \ + die "Replacing driver-select failed" +} + +src_compile() { + addpredict "${KERNEL_DIR}" + set_arch_to_kernel + emake KLIB_BUILD="${DESTDIR}"/lib/modules/"${KV_FULL}"/build || die "emake failed" +} + +src_install() { + for file in $(find -name \*.ko); do + insinto "/lib/modules/${KV_FULL}/updates/$(dirname ${file})" + doins "${file}" + done + dosbin scripts/athenable scripts/b43load scripts/iwl-enable \ + scripts/madwifi-unload scripts/athload scripts/iwl-load \ + scripts/b43enable scripts/unload.sh + + dodir /usr/lib/compat-wireless + exeinto /usr/lib/compat-wireless + doexe scripts/modlib.sh + + dodoc README.md + dodir /$(get_libdir)/udev/rules.d/ + insinto /$(get_libdir)/udev/rules.d/ + doins udev/50-compat_firmware.rules + exeinto /$(get_libdir)/udev/ + doexe udev/compat_firmware.sh +} + +pkg_postinst() { + update_depmod + update_moduledb + + if use !livecd; then + if use loadmodules; then + einfo "Attempting to unload modules..." + /usr/sbin/unload.sh 2>&1 | grep -E FATAL && ewarn "Unable to remove running modules, system may be unhappy, reboot HIGHLY recommended!" + einfo "Triggering automatic reload of needed modules..." + /sbin/udevadm trigger + einfo "We have attempted to load your new modules for you, this may fail horribly, or may just cause a network hiccup." + einfo "If you experience any issues reboot is the simplest course of action." + fi + fi + if use !loadmodules; then + einfo "You didn't USE=loadmodules but you can still attempt to switch to the new drivers without reboot." + einfo "Run 'unload.sh' then 'udevadm trigger' to cause udev to load the needed drivers." + einfo "If unload.sh fails for some reason you should be able to simply reboot to fix everything and load the new modules." + fi +} + +pkg_postrm() { + remove_moduledb +} -- cgit v1.2.3