gentoo resync : 14.07.2018

11 files changed, 0 insertions, 795 deletions

diff --git a/dev-db/mysql-init-scripts/files/conf.d-2.0 b/dev-db/mysql-init-scripts/files/conf.d-2.0
deleted file mode 100644
index cecb9a940f14..000000000000
--- a/dev-db/mysql-init-scripts/files/conf.d-2.0
+++ /dev/null
@@ -1,78 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# If you want a non-stock location for the config file, uncomment or update
-# either of these as needed. If you do use it, you must make sure that none of
-# your socket, pidfile, datadir, logfiles, binary logs, relay logs or InnoDB
-# files collide with each other.
-MY_CNF="/etc/mysql/my.cnf"
-#MY_CNF="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-#MY_CNF="${MY_CNF:-/etc/mysql/my-${SVCNAME/mysql.}.cnf}"
-
-# Place any additional arguments here that you might need
-# Common/useful options:
-# --skip-slave-start=1 - For bringing up replication initially
-# --server-id=NNN - Server ID for replication
-# --skip-networking - lock it down to UNIX sockets only
-MY_ARGS=""
-
-# This setting (in seconds) should be high enough to allow InnoDB to do a full
-# checkpoint recovery. 900 is the default used in the upstream RPM startup
-# scripts. 30 seconds should be sufficent if you just have a tiny <1GiB
-# database. After the core startup is done, we wait this long for the UNIX
-# socket to appear.
-STARTUP_TIMEOUT="900"
-
-# This is how long, in milliseconds, we wait for pidfile to be created, early
-# in the startup.
-STARTUP_EARLY_TIMEOUT="1000"
-
-# How long (in seconds) should we wait for shutdown?
-STOP_TIMEOUT=120
-
-# integer [-20 .. 19 ] default 0
-# change the priority of the server -20 (high) to 19 (low)
-# see nice(1) for description
-#NICE=0
-
-# See start-stop-daemon(8) for possible settings
-#IONICE=2
-
-# If defined, --verbose gets passed to S-S-D
-#DEBUG=1
-
-# Depending on your usage of MySQL, you may also wish to start it after some
-# other services are up. Uncomment the lines below as needed. If these aren't
-# enough for you, we encourage you to file a bug, and help us understand how
-# you are using MySQL.
-
-# Do your MySQL ACLs refer to hostnames not in your /etc/hosts?
-# If so, you need DNS before you can accept connections.
-# Avoid dependency circular loops if you use MySQL to power a local DNS server.
-#rc_use="dns"
-#rc_after="dns"
-
-# Does your MySQL bind to an IP on an interface other than net.lo?
-# Alternatively you might wish to specify the exact interface here.
-#rc_use="net"
-#rc_after="net"
-
-# Do you store your MySQL files on a SAN or other network filesystem, that is
-# provided by the netmount init script?
-#rc_need="netmount"
-
-# Or from NFS? P.S. This is not a good idea in most cases, but does have some
-# valid usage cases, so we provide the option.
-#rc_need="nfsmount"
-
-# Should any one of the instances satisfy the requirement for MySQL coming up?
-# By default, we say no.
-[ "${SVCNAME}" != mysql ] && rc_provide="!mysql"
-# But uncomment this next instead if you think it should.
-#rc_provide="mysql"
-
-# The conditional above has a false-positive "failure" return value as a
-# side-effect, and since it's the last statement, without the next line, this
-# script returns failure.
-return 0
-# vim: ft=gentoo-conf-d et ts=4 sw=4:
diff --git a/dev-db/mysql-init-scripts/files/init.d-2.2 b/dev-db/mysql-init-scripts/files/init.d-2.2
deleted file mode 100644
index 5603f9e60310..000000000000
--- a/dev-db/mysql-init-scripts/files/init.d-2.2
+++ /dev/null
@@ -1,194 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2018 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-extra_commands="checkconfig"
-extra_stopped_commands="bootstrap_galera"
-
-description_checkconfig="Verify the server's configuration"
-description_boostrap_galera="Start a new Galera cluster with this server as the initial node"
-
-depend() {
-	use net.lo
-	# localmount needed for $basedir
-	need localmount
-	# This service has its own timeout and may need to wait for repairs
-	# or remote synchronization
-	keyword -timeout
-}
-
-get_config() {
-	my_print_defaults --defaults-file="$1" mysqld server mariadb |
-	sed -n -e "s/^--$2=//p"
-}
-
-mysql_svcname() {
-	local ebextra=
-	case "${SVCNAME}" in
-		mysql*) ;;
-		*) ebextra=" (mysql)" ;;
-	esac
-	echo "${SVCNAME}${ebextra}"
-}
-
-stringContain() { [ -z "${2##*$1*}" ] && [ -z "$1" -o -n "$2" ]; }
-
-bootstrap_galera() {
-	MY_ARGS="--wsrep-new-cluster ${MY_ARGS}"
-	mark_service_starting
-	if start ; then
-		mark_service_started
-		return 0
-	else
-		mark_service_stopped
-		return 1
-	fi
-}
-
-start() {
-	# Check for old conf.d variables that mean migration was not yet done.
-	set | egrep -sq '^(mysql_slot_|MYSQL_BLOG_PID_FILE|STOPTIMEOUT)'
-	rc=$?
-	# Yes, MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING is a hidden variable.
-	# It does have a use in testing, as it is possible to build a config file
-	# that works with both the old and new init scripts simulateously.
-	if [ "${rc}" = 0 -a -z "${MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING}" ]; then
-		eerror "You have not updated your conf.d for the new mysql-init-scripts-2 revamp."
-		eerror "Not proceeding because it may be dangerous."
-		return 1
-	fi
-
-	# Check the config or die
-	if [ ${RC_CMD} != "restart" ] ; then
-		checkconfig || return 1
-	fi
-
-	# Now we can startup
-	ebegin "Starting $(mysql_svcname)"
-
-	MY_CNF="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-
-	if [ ! -r "${MY_CNF}" ] ; then
-		eerror "Cannot read the configuration file \`${MY_CNF}'"
-		return 1
-	fi
-
-	# tail -n1 is critical as these we only want the last instance of the option
-	local basedir=$(get_config "${MY_CNF}" basedir | tail -n1)
-	local pidfile=$(get_config "${MY_CNF}" pid-file | tail -n1)
-	local socket=$(get_config "${MY_CNF}" socket | tail -n1)
-	local chroot=$(get_config "${MY_CNF}" chroot | tail -n1)
-	local wsrep="$(get_config "${MY_CNF}" 'wsrep[_-]on' | tail -n1 | awk '{print tolower($0)}')"
-	local wsrep_new=$(get_config "${MY_CNF}" 'wsrep-new-cluster' | tail -n1)
-
-	if [ -n "${chroot}" ] ; then
-		socket="${chroot}/${socket}"
-		pidfile="${chroot}/${pidfile}"
-	fi
-
-	# Galera: Only check datadir if not starting a new cluster and galera is enabled
-	# wsrep_on is not on or wsrep-new-cluster exists in the config or MY_ARGS
-	[ "${wsrep}" = "1" ] && wsrep="on"
-	if [ "${wsrep}" != "on" ] || [ -n "${wsrep_new}" ] || stringContain 'wsrep-new-cluster' "${MY_ARGS}" ; then
-
-		local datadir=$(get_config "${MY_CNF}" datadir | tail -n1)
-		if [ ! -d "${datadir}" ] ; then
-			eerror "MySQL datadir \`${datadir}' is empty or invalid"
-			eerror "Please check your config file \`${MY_CNF}'"
-			return 1
-		fi
-
-		if [ ! -d "${datadir}"/mysql ] ; then
-			# find which package is installed to report an error
-			local EROOT=$(portageq envvar EROOT)
-			local DBPKG_P=$(portageq match ${EROOT} $(portageq expand_virtual ${EROOT} virtual/mysql | head -n1))
-			if [ -z ${DBPKG_P} ] ; then
-				eerror "You don't appear to have a server package installed yet."
-			else
-				eerror "You don't appear to have the mysql database installed yet."
-				eerror "Please run \`emerge --config =${DBPKG_P}\` to have this done..."
-			fi
-			return 1
-		fi
-	fi
-
-	local piddir="${pidfile%/*}"
-	checkpath -d --owner mysql:mysql --mode 0755 "$piddir"
-	rc=$?
-	if [ $rc -ne 0 ]; then
-		eerror "Directory $piddir for pidfile does not exist and cannot be created"
-		return 1
-	fi
-
-	local startup_timeout=${STARTUP_TIMEOUT:-900}
-	local startup_early_timeout=${STARTUP_EARLY_TIMEOUT:-1000}
-	local tmpnice="${NICE:+"--nicelevel "}${NICE}"
-	local tmpionice="${IONICE:+"--ionice "}${IONICE}"
-	start-stop-daemon \
-		${DEBUG:+"--verbose"} \
-		--start \
-		--exec "${basedir}"/sbin/mysqld \
-		--pidfile "${pidfile}" \
-		--background \
-		--wait ${startup_early_timeout} \
-		${tmpnice} \
-		${tmpionice} \
-		-- --defaults-file="${MY_CNF}" ${MY_ARGS}
-	local ret=$?
-	if [ ${ret} -ne 0 ] ; then
-		eend ${ret}
-		return ${ret}
-	fi
-
-	ewaitfile ${startup_timeout} "${socket}"
-	eend $? || return 1
-
-	save_options pidfile "${pidfile}"
-	save_options basedir "${basedir}"
-}
-
-stop() {
-	if [ ${RC_CMD} = "restart" ] ; then
-		checkconfig || return 1
-	fi
-
-	ebegin "Stopping $(mysql_svcname)"
-
-	local pidfile="$(get_options pidfile)"
-	local basedir="$(get_options basedir)"
-	local stop_timeout=${STOP_TIMEOUT:-120}
-
-	start-stop-daemon \
-		${DEBUG:+"--verbose"} \
-		--stop \
-		--exec "${basedir}"/sbin/mysqld \
-		--pidfile "${pidfile}" \
-		--retry ${stop_timeout}
-	eend $?
-}
-
-checkconfig() {
-	local my_cnf="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-	local basedir=$(get_config "${my_cnf}" basedir | tail -n1)
-	local svc_name=$(mysql_svcname)
-	ebegin "Checking mysqld configuration for ${svc_name}"
-
-	if [ ${RC_CMD} = "checkconfig" ] ; then
-		# We are calling checkconfig specifically.  Print warnings regardless.
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-	else
-		# Suppress output to check the return value
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null 2>&1
-
-		# If the above command does not return 0,
-		# then there is an error to echo to the user
-		if [ $? -ne 0 ] ; then
-			"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-		fi
-	fi
-
-	eend $? "${svc_name} config check failed"
-}
-
-# vim: filetype=gentoo-init-d sw=2 ts=2 sts=2 noet:
-
diff --git a/dev-db/mysql-init-scripts/files/init.d-s6-2.2 b/dev-db/mysql-init-scripts/files/init.d-s6-2.2
deleted file mode 100644
index 3fa54e949c91..000000000000
--- a/dev-db/mysql-init-scripts/files/init.d-s6-2.2
+++ /dev/null
@@ -1,163 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	use net.lo
-	# localmount needed for $basedir
-	need localmount s6-svscan
-}
-
-get_config() {
-	my_print_defaults --defaults-file="$1" mysqld server mariadb |
-	sed -n -e "s/^--$2=//p"
-}
-
-mysql_svcname() {
-	local ebextra=
-	case "${svc_name}" in
-		mysql*) ;;
-		*) ebextra=" (mysql)" ;;
-	esac
-	echo "${svc_name}${ebextra}"
-}
-
-stringContain() { [ -z "${2##*$1*}" ] && [ -z "$1" -o -n "$2" ]; }
-
-bootstrap_galera() {
-	MY_ARGS="--wsrep-new-cluster ${MY_ARGS}"
-	mark_service_starting
-	if start_pre && start ; then
-		mark_service_started
-		return 0
-	else
-		mark_service_stopped
-		return 1
-	fi
-}
-
-
-extra_commands="checkconfig"
-extra_stopped_commands="bootstrap_galera"
-
-description_checkconfig="Verify the server's configuration"
-description_boostrap_galera="Start a new Galera cluster with this server as the initial node"
-supervisor=s6
-name=$(mysql_svcname)
-s6_service_timeout_stop="$((1000*${STOP_TIMEOUT:-120}))"
-#s6_svwait_options_start="-U -t $((1000*${STARTUP_EARLY_TIMEOUT:-1000}))"
-svc_name=${RC_SVCNAME%-s6}
-s6_service_path=/var/svc.d/${svc_name}
-
-start_pre() {
-	# Check the config or die
-	if [ ${RC_CMD} != "restart" ] ; then
-		checkconfig || return 1
-	fi
-
-	MY_CNF="${MY_CNF:-/etc/${svc_name}/my.cnf}"
-
-	if [ ! -r "${MY_CNF}" ] ; then
-		eerror "Cannot read the configuration file \`${MY_CNF}'"
-		return 1
-	fi
-
-	# tail -n1 is critical as these we only want the last instance of the option
-	local basedir=$(get_config "${MY_CNF}" basedir | tail -n1)
-	local pidfile=$(get_config "${MY_CNF}" pid-file | tail -n1)
-	local socket=$(get_config "${MY_CNF}" socket | tail -n1)
-	local chroot=$(get_config "${MY_CNF}" chroot | tail -n1)
-	local wsrep="$(get_config "${MY_CNF}" 'wsrep[_-]on' | tail -n1 | awk '{print tolower($0)}')"
-	local wsrep_new=$(get_config "${MY_CNF}" 'wsrep-new-cluster' | tail -n1)
-
-	if [ -n "${chroot}" ] ; then
-		socket="${chroot}/${socket}"
-		pidfile="${chroot}/${pidfile}"
-	fi
-
-	# Galera: Only check datadir if not starting a new cluster and galera is enabled
-	# wsrep_on is not on or wsrep-new-cluster exists in the config or MY_ARGS
-	[ "${wsrep}" = "1" ] && wsrep="on"
-	if [ "${wsrep}" != "on" ] || [ -n "${wsrep_new}" ] || stringContain 'wsrep-new-cluster' "${MY_ARGS}" ; then
-
-		local datadir=$(get_config "${MY_CNF}" datadir | tail -n1)
-		if [ ! -d "${datadir}" ] ; then
-			eerror "MySQL datadir \`${datadir}' is empty or invalid"
-			eerror "Please check your config file \`${MY_CNF}'"
-			return 1
-		fi
-
-		if [ ! -d "${datadir}"/mysql ] ; then
-			# find which package is installed to report an error
-			local EROOT=$(portageq envvar EROOT)
-			local DBPKG_P=$(portageq match ${EROOT} $(portageq expand_virtual ${EROOT} virtual/mysql | head -n1))
-			if [ -z ${DBPKG_P} ] ; then
-				eerror "You don't appear to have a server package installed yet."
-			else
-				eerror "You don't appear to have the mysql database installed yet."
-				eerror "Please run \`emerge --config =${DBPKG_P}\` to have this done..."
-			fi
-			return 1
-		fi
-	fi
-
-	local piddir="${pidfile%/*}"
-	checkpath -d --owner mysql:mysql --mode 0755 "$piddir"
-	rc=$?
-	if [ $rc -ne 0 ]; then
-		eerror "Directory $piddir for pidfile does not exist and cannot be created"
-		return 1
-	fi
-
-	# Prepare env files to source
-	mkdir -p "/var/svc.d/${svc_name}"
-	echo "MY_CNF=\"${MY_CNF}\"" > "/var/svc.d/${svc_name}/env"
-	echo "MY_ARGS=\"${MY_ARGS}\"" >> "/var/svc.d/${svc_name}/env"
-	echo "basedir=\"${basedir}\"" >> "/var/svc.d/${svc_name}/env"
-	mkdir -p "/var/svc.d/${svc_name}/log"
-	echo "SVCNAME=\"${svc_name}\"" > "/var/svc.d/${svc_name}/log/env"
-	echo "S6_LOG_OPTIONS=\"${S6_LOG_OPTIONS}\"" > "/var/svc.d/${svc_name}/log/env"
-}
-
-start_post() {
-	local socket=$(get_config "${MY_CNF}" socket | tail -n1)
-	local chroot=$(get_config "${MY_CNF}" chroot | tail -n1)
-	local startup_timeout=${STARTUP_TIMEOUT:-900}
-
-	if [ -n "${chroot}" ] ; then
-		socket="${chroot}/${socket}"
-	fi
-	ewaitfile ${startup_timeout} "${socket}"
-}
-
-checkconfig() {
-	local my_cnf="${MY_CNF:-/etc/${svc_name}/my.cnf}"
-	local basedir=$(get_config "${my_cnf}" basedir | tail -n1)
-	local svc_name=$(mysql_svcname)
-	ebegin "Checking mysqld configuration for ${svc_name}"
-
-	if [ ${RC_CMD} = "checkconfig" ] ; then
-		# We are calling checkconfig specifically.  Print warnings regardless.
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-	else
-		# Suppress output to check the return value
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null 2>&1
-
-		# If the above command does not return 0,
-		# then there is an error to echo to the user
-		if [ $? -ne 0 ] ; then
-			"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-		fi
-	fi
-
-	eend $? "${svc_name} config check failed"
-}
-
-stop_pre() {
-	if [ ${RC_CMD} = "restart" ] ; then
-		checkconfig || return 1
-	fi
-}
-
-# vim: filetype=gentoo-init-d sw=2 ts=2 sts=2 noet:
-
diff --git a/dev-db/mysql-init-scripts/files/init.d-supervise b/dev-db/mysql-init-scripts/files/init.d-supervise
deleted file mode 100644
index 5341a6a18d64..000000000000
--- a/dev-db/mysql-init-scripts/files/init.d-supervise
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-extra_commands="checkconfig"
-extra_stopped_commands="boostrap_galera"
-
-description_checkconfig="Verify the server's configuration"
-description_boostrap_galera="Start a new Galera cluster with this server as the initial node"
-
-depend() {
-	use net.lo
-	# localmount needed for $basedir
-	need localmount
-}
-
-get_config() {
-	my_print_defaults --defaults-file="$1" mysqld server mariadb |
-	sed -n -e "s/^--$2=//p"
-}
-
-mysql_svcname() {
-	local ebextra=
-	case "${SVCNAME}" in
-		mysql*) ;;
-		*) ebextra=" (mysql)" ;;
-	esac
-	echo "${SVCNAME}${ebextra}"
-}
-
-stringContain() { [ -z "${2##*$1*}" ] && [ -z "$1" -o -n "$2" ]; }
-
-bootstrap_galera() {
-	MY_ARGS="--wsrep-new-cluster ${MY_ARGS}"
-	mark_service_starting
-	if start ; then
-		mark_service_started
-		return 0
-	else
-		mark_service_stopped
-		return 1
-	fi
-}
-
-start() {
-	# Check for old conf.d variables that mean migration was not yet done.
-	set | egrep -sq '^(mysql_slot_|MYSQL_BLOG_PID_FILE|STOPTIMEOUT)'
-	rc=$?
-	# Yes, MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING is a hidden variable.
-	# It does have a use in testing, as it is possible to build a config file
-	# that works with both the old and new init scripts simulateously.
-	if [ "${rc}" = 0 -a -z "${MYSQL_INIT_I_KNOW_WHAT_I_AM_DOING}" ]; then
-		eerror "You have not updated your conf.d for the new mysql-init-scripts-2 revamp."
-		eerror "Not proceeding because it may be dangerous."
-		return 1
-	fi
-
-	# Check the config or die
-	if [ ${RC_CMD} != "restart" ] ; then
-		checkconfig || return 1
-	fi
-
-	# Now we can startup
-	ebegin "Starting $(mysql_svcname)"
-
-	MY_CNF="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-
-	if [ ! -r "${MY_CNF}" ] ; then
-		eerror "Cannot read the configuration file \`${MY_CNF}'"
-		return 1
-	fi
-
-	# tail -n1 is critical as these we only want the last instance of the option
-	local basedir=$(get_config "${MY_CNF}" basedir | tail -n1)
-	local pidfile=$(get_config "${MY_CNF}" pid-file | tail -n1)
-	local socket=$(get_config "${MY_CNF}" socket | tail -n1)
-	local chroot=$(get_config "${MY_CNF}" chroot | tail -n1)
-	local wsrep="$(get_config "${MY_CNF}" 'wsrep[_-]on' | tail -n1 | awk '{print tolower($0)}')"
-	local wsrep_new=$(get_config "${MY_CNF}" 'wsrep-new-cluster' | tail -n1)
-
-	if [ -n "${chroot}" ] ; then
-		socket="${chroot}/${socket}"
-		pidfile="${chroot}/${pidfile}"
-	fi
-
-	# Galera: Only check datadir if not starting a new cluster and galera is enabled
-	# wsrep_on is not on or wsrep-new-cluster exists in the config or MY_ARGS
-	[ "${wsrep}" = "1" ] && wsrep="on"
-	if [ "${wsrep}" != "on" ] || [ -n "${wsrep_new}" ] || stringContain 'wsrep-new-cluster' "${MY_ARGS}" ; then
-
-		local datadir=$(get_config "${MY_CNF}" datadir | tail -n1)
-		if [ ! -d "${datadir}" ] ; then
-			eerror "MySQL datadir \`${datadir}' is empty or invalid"
-			eerror "Please check your config file \`${MY_CNF}'"
-			return 1
-		fi
-
-		if [ ! -d "${datadir}"/mysql ] ; then
-			# find which package is installed to report an error
-			local EROOT=$(portageq envvar EROOT)
-			local DBPKG_P=$(portageq match ${EROOT} $(portageq expand_virtual ${EROOT} virtual/mysql | head -n1))
-			if [ -z ${DBPKG_P} ] ; then
-				eerror "You don't appear to have a server package installed yet."
-			else
-				eerror "You don't appear to have the mysql database installed yet."
-				eerror "Please run \`emerge --config =${DBPKG_P}\` to have this done..."
-			fi
-			return 1
-		fi
-	fi
-
-	local piddir="${pidfile%/*}"
-	checkpath -d --owner mysql:mysql --mode 0755 "$piddir"
-	rc=$?
-	if [ $rc -ne 0 ]; then
-		eerror "Directory $piddir for pidfile does not exist and cannot be created"
-		return 1
-	fi
-
-	local startup_timeout=${STARTUP_TIMEOUT:-900}
-#	local startup_early_timeout=${STARTUP_EARLY_TIMEOUT:-1000}
-	local tmpnice="${NICE:+"--nicelevel "}${NICE}"
-	local tmpionice="${IONICE:+"--ionice "}${IONICE}"
-	supervise-daemon \
-		${DEBUG:+"--verbose"} \
-		--pidfile "/run/${SVCNAME}.pid" \
-		${tmpnice} \
-		${tmpionice} \
-		--start \
-		"${basedir}"/sbin/mysqld \
-		-- --defaults-file="${MY_CNF}" ${MY_ARGS}
-	local ret=$?
-	if [ ${ret} -ne 0 ] ; then
-		eend ${ret}
-		return ${ret}
-	fi
-
-	ewaitfile ${startup_timeout} "${socket}"
-	eend $? || return 1
-}
-
-stop() {
-	if [ ${RC_CMD} = "restart" ] ; then
-		checkconfig || return 1
-	fi
-
-	ebegin "Stopping $(mysql_svcname)"
-
-	supervise-daemon \
-		${DEBUG:+"--verbose"} \
-		--stop \
-		--pidfile "/run/${SVCNAME}.pid"
-	eend $?
-}
-
-checkconfig() {
-	local my_cnf="${MY_CNF:-/etc/${SVCNAME}/my.cnf}"
-	local basedir=$(get_config "${my_cnf}" basedir | tail -n1)
-	local svc_name=$(mysql_svcname)
-	ebegin "Checking mysqld configuration for ${svc_name}"
-
-	if [ ${RC_CMD} = "checkconfig" ] ; then
-		# We are calling checkconfig specifically.  Print warnings regardless.
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-	else
-		# Suppress output to check the return value
-		"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null 2>&1
-
-		# If the above command does not return 0,
-		# then there is an error to echo to the user
-		if [ $? -ne 0 ] ; then
-			"${basedir}"/sbin/mysqld --defaults-file="${my_cnf}" --help --verbose > /dev/null
-		fi
-	fi
-
-	eend $? "${svc_name} config check failed"
-}
-
-# vim: filetype=gentoo-init-d sw=2 ts=2 sts=2 noet:
-
diff --git a/dev-db/mysql-init-scripts/files/log-s6 b/dev-db/mysql-init-scripts/files/log-s6
deleted file mode 100644
index d135c530cd4e..000000000000
--- a/dev-db/mysql-init-scripts/files/log-s6
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-if [ -e ./env ] ; then source ./env ; else echo "failed to source env" ; fi
-mkdir -p "/var/log/mysql/${SVCNAME}"
-if [ ${S6_LOG_OPTIONS} ] ; then
-	exec s6-log ${S6_LOG_OPTIONS}
-else
-	exec s6-log -b n20 S15000000 !"gzip -nq9" "/var/log/mysql/${SVCNAME}"
-fi
diff --git a/dev-db/mysql-init-scripts/files/logrotate.mysql b/dev-db/mysql-init-scripts/files/logrotate.mysql
deleted file mode 100644
index afb20c66d479..000000000000
--- a/dev-db/mysql-init-scripts/files/logrotate.mysql
+++ /dev/null
@@ -1,14 +0,0 @@
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-/var/log/mysql/mysql.err /var/log/mysql/mysql.log /var/log/mysql/mysqld.err {
-monthly
-create 660 mysql mysql
-notifempty
-size 5M
-sharedscripts
-missingok
-postrotate
-[ -f /var/run/mysqld/mysqld.pid ] && /bin/kill -HUP `cat /var/run/mysqld/mysqld.pid`
-endscript
-}
diff --git a/dev-db/mysql-init-scripts/files/mysql.conf b/dev-db/mysql-init-scripts/files/mysql.conf
deleted file mode 100644
index 74cd5f836e76..000000000000
--- a/dev-db/mysql-init-scripts/files/mysql.conf
+++ /dev/null
@@ -1 +0,0 @@
-d /var/run/mysqld 0755 mysql mysql -
diff --git a/dev-db/mysql-init-scripts/files/mysqld-v2.service b/dev-db/mysql-init-scripts/files/mysqld-v2.service
deleted file mode 100644
index 641abf733098..000000000000
--- a/dev-db/mysql-init-scripts/files/mysqld-v2.service
+++ /dev/null
@@ -1,47 +0,0 @@
-[Unit]
-Description=MySQL database server
-After=syslog.target
-After=network.target
-Conflicts=mariadb.service
-
-[Service]
-Type=simple
-User=mysql
-Group=mysql
-
-# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
-# https://bugzilla.redhat.com/show_bug.cgi?id=547485
-ExecStart=/usr/sbin/mysqld --basedir=/usr
-ExecStartPost=/usr/libexec/mysqld-wait-ready $MAINPID
-
-# Give a reasonable amount of time for the server to start up/shut down
-TimeoutSec=300
-
-# We rely on systemd, not mysqld_safe, to restart mysqld if it dies
-# Restart crashed server only, on-failure would also restart, for example, when
-# my.cnf contains unknown option
-Restart=on-abort
-RestartSec=5s
-
-# Place temp files in a secure directory, not /tmp
-PrivateTmp=true
-
-# To allow memlock to be used as non-root user if set in configuration
-CapabilityBoundingSet=CAP_IPC_LOCK
-
-# Prevent writes to /usr, /boot, and /etc
-ProtectSystem=full
-
-# Currently has issues with SELinux https://jira.mariadb.org/browse/MDEV-10404
-# This is safe to uncomment when not using SELinux
-#NoNewPrivileges=true
-
-PrivateDevices=true
-
-# Prevent accessing /home, /root and /run/user
-ProtectHome=true
-
-UMask=007
-
-[Install]
-WantedBy=multi-user.target
diff --git a/dev-db/mysql-init-scripts/files/mysqld-wait-ready b/dev-db/mysql-init-scripts/files/mysqld-wait-ready
deleted file mode 100644
index 9e5d3e4d85e0..000000000000
--- a/dev-db/mysql-init-scripts/files/mysqld-wait-ready
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-
-# This script waits for mysqld to be ready to accept connections
-# (which can be many seconds or even minutes after launch, if there's
-# a lot of crash-recovery work to do).
-# Running this as ExecStartPost is useful so that services declared as
-# "After mysqld" won't be started until the database is really ready.
-
-# Service file passes us the daemon's PID (actually, mysqld_safe's PID)
-daemon_pid="$1"
-
-# extract value of a MySQL option from config files
-# Usage: get_mysql_option SECTION VARNAME DEFAULT
-# result is returned in $result
-# We use my_print_defaults which prints all options from multiple files,
-# with the more specific ones later; hence take the last match.
-get_mysql_option(){
-	result=`/usr/bin/my_print_defaults "$1" | sed -n "s/^--$2=//p" | tail -n 1`
-	if [ -z "$result" ]; then
-	    # not found, use default
-	    result="$3"
-	fi
-}
-
-# Defaults here had better match what mysqld_safe will default to
-get_mysql_option mysqld datadir "/var/lib/mysql"
-datadir="$result"
-get_mysql_option mysqld socket "/var/lib/mysql/mysql.sock"
-socketfile="$result"
-
-# Wait for the server to come up or for the mysqld process to disappear
-ret=0
-while /bin/true; do
-	RESPONSE=`/usr/bin/mysqladmin --no-defaults --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
-	mret=$?
-	if [ $mret -eq 0 ]; then
-	    break
-	fi
-	# exit codes 1, 11 (EXIT_CANNOT_CONNECT_TO_SERVICE) are expected,
-	# anything else suggests a configuration error
-	if [ $mret -ne 1 -a $mret -ne 11 ]; then
-	    ret=1
-	    break
-	fi
-	# "Access denied" also means the server is alive
-	echo "$RESPONSE" | grep -q "Access denied for user" && break
-
-	# Check process still exists
-	if ! /bin/kill -0 $daemon_pid 2>/dev/null; then
-	    ret=1
-	    break
-	fi
-	sleep 1
-done
-
-exit $ret
diff --git a/dev-db/mysql-init-scripts/files/mysqld_at-v2.service b/dev-db/mysql-init-scripts/files/mysqld_at-v2.service
deleted file mode 100644
index 26964ea8a768..000000000000
--- a/dev-db/mysql-init-scripts/files/mysqld_at-v2.service
+++ /dev/null
@@ -1,45 +0,0 @@
-[Unit]
-Description=MySQL database server
-ConditionPathExists=/etc/mysql/my%I.cnf
-After=network.target
-
-[Service]
-Type=simple
-User=mysql
-Group=mysql
-
-# Note: we set --basedir to prevent probes that might trigger SELinux alarms,
-# https://bugzilla.redhat.com/show_bug.cgi?id=547485
-ExecStart=/usr/sbin/mysqld --defaults-file=/etc/mysql/my%I.cnf --basedir=/usr
-ExecStartPost=/usr/libexec/mysqld-wait-ready $MAINPID
-
-# Give a reasonable amount of time for the server to start up/shut down
-TimeoutSec=300
-
-# Restart crashed server only, on-failure would also restart, for example, when
-# my.cnf contains unknown option
-Restart=on-abort
-RestartSec=5s
-
-# Place temp files in a secure directory, not /tmp
-PrivateTmp=true
-
-# To allow memlock to be used as non-root user if set in configuration
-CapabilityBoundingSet=CAP_IPC_LOCK
-
-# Prevent writes to /usr, /boot, and /etc
-ProtectSystem=full
-
-# Currently has issues with SELinux https://jira.mariadb.org/browse/MDEV-10404
-# This is safe to uncomment when not using SELinux
-#NoNewPrivileges=true
-
-PrivateDevices=true
-
-# Prevent accessing /home, /root and /run/user
-ProtectHome=true
-
-UMask=007
-
-[Install]
-WantedBy=multi-user.target
diff --git a/dev-db/mysql-init-scripts/files/run-s6 b/dev-db/mysql-init-scripts/files/run-s6
deleted file mode 100644
index 1ab2253cd823..000000000000
--- a/dev-db/mysql-init-scripts/files/run-s6
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-if [ -e ./env ] ; then source ./env ; else echo "failed to source env" ; fi
-exec "${basedir}/sbin/mysqld" --defaults-file="${MY_CNF}" ${MY_ARGS} 2>&1