gentoo resync : 19.03.2019

1 files changed, 89 insertions, 32 deletions

diff --git a/profiles/use.local.desc b/profiles/use.local.desc
index dd3105e1656b..632d593564c4 100644
--- a/profiles/use.local.desc
+++ b/profiles/use.local.desc
@@ -34,7 +34,6 @@ app-admin/clsync:gio - Enable GIO for FS monitoring (glib based alternative to i
 app-admin/clsync:highload-locks - Allows to use spinlocks for short delays instead of mutexes, but only on SMP systems.
 app-admin/clsync:namespaces - Enable namespaces isolation.
 app-admin/conky:apcupsd - Enable support for sys-power/apcupsd
-app-admin/conky:audacious - Enable monitoring of music played by media-sound/audacious
 app-admin/conky:cmus - Enable monitoring of music played by media-sound/cmus
 app-admin/conky:eve - Enable support for the eve-online skill monitor
 app-admin/conky:ical - Enable support for events from iCalendar (RFC 5545) files using dev-libs/libical
@@ -51,9 +50,9 @@ app-admin/conky:nvidia - Enable reading of nvidia card temperature sensors via x
 app-admin/conky:portmon - Enable support for tcp (ip4) port monitoring
 app-admin/conky:thinkpad - Enable support for IBM/Lenovo notebooks
 app-admin/conky:weather-metar - Enable support for metar weather service
-app-admin/conky:weather-xoap - Enable support for metar and xoap weather service
 app-admin/conky:webserver - Enable support to act as a webserver serving conkys output using net-libs/libmicrohttpd
 app-admin/conky:xmms2 - Enable monitoring of music played by media-sound/xmms2
+app-admin/conserver:freeipmi - Compile in FreeIPMI support via sys-libs/freeipmi
 app-admin/diamond:mongo - Enable MongoDB support
 app-admin/diamond:redis - Enable Redis support
 app-admin/diradm:automount - Support for automount data in LDAP
@@ -504,6 +503,10 @@ app-emulation/docker-runc:apparmor - Enable AppArmor support
 app-emulation/dosemu:fluidsynth - use media-sound/fluidsynth for MIDI emulation
 app-emulation/e-uae:capslib - Add CAPS library support
 app-emulation/e-uae:sdl-sound - Use media-libs/sdl-sound for audio output
+app-emulation/faudio:ffmpeg - FAudio has optional support for decoding xWMA resources using FFmpeg, requiring: media-video/ffmpeg (note: this feature is not supported by media-video/libav).
+app-emulation/faudio:test - Build and run faudio testsuite.
+app-emulation/faudio:utils - Build all faudio utilities.
+app-emulation/faudio:xnasong - Build support for optional XNG_SONG component (note: this not required by app-emulation/wine-staging, app-emulation/wine-vanilla for faudio XAudio support).
 app-emulation/free42:alsa - Adds support for Advanced Linux Sound Architecture
 app-emulation/fuse:backend-X - Use X11 rendering backend
 app-emulation/fuse:backend-fbcon - Use framebuffer rendering backend
@@ -567,8 +570,10 @@ app-emulation/lxc:templates - Install old style templates through app-emulation/
 app-emulation/lxd:daemon - Build the system daemon, not just the client tool
 app-emulation/lxd:dnsmasq - Depend on dnsmasq to provide DHCP and DNS
 app-emulation/lxd:tools - Build and install optional tools
+app-emulation/nemu:network-map - Adds possibility of exporting network map to SVG
 app-emulation/nemu:ovf - Adds support for OVA/OVF import
 app-emulation/nemu:savevm - Adds support for QEMU savevm snapshots (experimental, QEMU must be patched)
+app-emulation/nemu:spice - Adds Spice protocol support
 app-emulation/nemu:vnc-client - Adds support for external VNC client
 app-emulation/open-vm-tools:deploypkg - Build deploypkg plugin
 app-emulation/open-vm-tools:dnet - Enable support for nicinfo
@@ -711,6 +716,7 @@ app-emulation/wine-d3d9:vulkan - Enable Vulkan drivers
 app-emulation/wine-staging:capi - Enable ISDN support via CAPI
 app-emulation/wine-staging:custom-cflags - Bypass strip-flags; use at your own peril
 app-emulation/wine-staging:dos - Pull in games-emulation/dosbox to run DOS applications
+app-emulation/wine-staging:faudio - Pull in app-emulation/faudio to provide XAudio2 functionality
 app-emulation/wine-staging:ffmpeg - Use media-video/ffmpeg to decode WMA formats
 app-emulation/wine-staging:gecko - Add support for the Gecko engine when using iexplore
 app-emulation/wine-staging:gssapi - Use GSSAPI (Kerberos SSP support)
@@ -735,6 +741,7 @@ app-emulation/wine-staging:vulkan - Enable Vulkan drivers
 app-emulation/wine-vanilla:capi - Enable ISDN support via CAPI
 app-emulation/wine-vanilla:custom-cflags - Bypass strip-flags; use at your own peril
 app-emulation/wine-vanilla:dos - Pull in games-emulation/dosbox to run DOS applications
+app-emulation/wine-vanilla:faudio - Pull in app-emulation/faudio to provide XAudio2 functionality
 app-emulation/wine-vanilla:gecko - Add support for the Gecko engine when using iexplore
 app-emulation/wine-vanilla:gssapi - Use GSSAPI (Kerberos SSP support)
 app-emulation/wine-vanilla:gstreamer - Use media-libs/gstreamer to provide DirectShow functionality;
@@ -956,7 +963,11 @@ app-misc/gourmet:web - Enable support for the web import plugin
 app-misc/gramps:geo - Enable rendering of geographical data using sci-geosciences/osm-gps-map
 app-misc/gramps:rcs - Adds support for family tree archives via dev-vcs/rcs
 app-misc/gramps:reports - All external software that is needed for graphical reports will be installed
-app-misc/graphlcd-base:g15 - Add support for app-misc/g15daemon driver (e.g. Logitech G15 Keybord)
+app-misc/graphlcd-base:fontconfig - Add support for media-libs/fontconfig font names.
+app-misc/graphlcd-base:freetype - Add support for media-libs/freetype.
+app-misc/graphlcd-base:g15 - Add support for app-misc/g15daemon, used by the Logitech G15 keyboard.
+app-misc/graphlcd-base:graphicsmagick - Add support for media-gfx/graphicsmagick.
+app-misc/graphlcd-base:imagemagick - Add support for media-gfx/imagemagick.
 app-misc/irtrans-irserver:mono - Enable mono support
 app-misc/jq:oniguruma - Use dev-libs/oniguruma for regular expression support
 app-misc/kryoflux-dtc:demos - Install example floppy game files.
@@ -1363,6 +1374,13 @@ app-text/writerperfect:wpg - Add support for wpg format using app-text/libwpg
 app-text/writerperfect:wps - Add support for wps format using app-text/libwps
 app-text/wv:tools - Install optional utilities considered deprecated in favor of using AbiWord.
 app-text/xmlto:text - Support conversion from XML to plain text
+app-text/xpdf:cmyk - Include support for CMYK rasterization
+app-text/xpdf:i18n - Enable support non-UTF8 national charsets
+app-text/xpdf:libpaper - Use app-text/libpaper to get paper preferences
+app-text/xpdf:metric - Use A4 instead of US Letter paper size by default for PostScript output. This option has effect only if libpaper USE flag is disabled
+app-text/xpdf:opi - Include support for OPI (Open Prepress Interface) comments
+app-text/xpdf:textselect - Allow text selection
+app-text/xpdf:utils - Install command-line PDF converters and various utilities
 app-text/zathura:magic - Use libmagic to determine mimetypes
 app-text/zathura:synctex - Use libsynctex to get latex codeline from pdf
 app-text/zathura-meta:cb - Install plug-in for ComicBook support
@@ -1507,6 +1525,7 @@ dev-db/mariadb-galera:systemtap - Build support for profiling and tracing using
 dev-db/mariadb-galera:test - Install upstream testsuites for end use.
 dev-db/mariadb-galera:tokudb - Add support for TokuDB storage engine
 dev-db/mariadb-galera:yassl - Enable SSL connections and crypto functions using the bundled yaSSL
+dev-db/mongodb:lto - Adds support for link time optimization
 dev-db/mongodb:mms-agent - Install the MongoDB Monitoring Service agent
 dev-db/mongodb:tools - Install the MongoDB tools (mongoimport, mongodump...) from app-admin/mongo-tools
 dev-db/mycli:ssh - Add support for connection over SSH tunnel
@@ -1911,6 +1930,7 @@ dev-java/ant:regexp - Enable Apache Regexp Ant tasks
 dev-java/ant:resolver - Enable Apache Resolver Ant tasks
 dev-java/ant:swing - Enable Swing Ant tasks
 dev-java/ant:testutil - Enable optional test util classes
+dev-java/ant:xz - Enable XZ Ant tasks
 dev-java/commons-collections:test-framework - Install the test framework
 dev-java/commons-logging:avalon-framework - Add optional support for avalon-framework
 dev-java/commons-logging:avalon-logkit - Add optional support for avalon-logkit
@@ -2480,6 +2500,7 @@ dev-libs/libverto:libevent - Support event loops using dev-libs/libevent
 dev-libs/libverto:tevent - Support event loops using sys-libs/tevent
 dev-libs/libxmlb:stemmer - Enable language stemming support
 dev-libs/libzia:ftdi - Enable support for FTDI USB chips
+dev-libs/libzip:mbedtls - Use net-libs/mbedtls as TLS provider
 dev-libs/link-grammar:aspell - Adds support for app-text/aspell spell checker
 dev-libs/link-grammar:hunspell - Adds support for app-text/hunspell spell checker
 dev-libs/log4cplus:iconv - Use inconv for wchar_t <-> char conversions. See also log4cplus's unicode.txt documentation
@@ -2570,6 +2591,7 @@ dev-libs/xapian:brass - Enabled brass backend db support
 dev-libs/xapian:chert - Enabled chert backend db support
 dev-libs/xapian:glass - Enabled glass backend db support
 dev-libs/xapian:inmemory - Enabled inmemory backend db support
+dev-libs/xapian:remote - Enabled remote backend db support
 dev-libs/xerces-c:iconv - Use iconv (virtual/libiconv) as message loader and transcoder (in general it would be possible to use iconv only as message loader and something else like icu or the native method as transcoder and vice-versa, but this is a less common case and hard to handle)
 dev-libs/xerces-c:threads - Enable threading support through pthread (or other libraries on AIX, IRIX, HPUX, Solars). Highly recommended
 dev-libs/xml-security-c:nss - Use dev-libs/nss for certain crypto operations (configureable at runtime)
@@ -2976,6 +2998,7 @@ dev-qt/qtwebkit:printsupport - Enable printing via dev-qt/qtprintsupport
 dev-qt/qtwebkit:qml - Build QML/QtQuick bindings
 dev-qt/qtwebsockets:qml - Build QML bindings
 dev-qt/qtwidgets:gles2 - Use GLES 2.0 or later instead of full OpenGL
+dev-qt/qtxmlpatterns:qml - Build the XmlListModel import for QtQuick (requires QtDeclarative)
 dev-ros/rosbag:lz4 - Add support for lz4 compressed bags.
 dev-ros/rosconsole:glog - Use dev-cpp/glog as log backend.
 dev-ros/rosconsole:log4cxx - Use dev-libs/log4cxx as log backend.
@@ -3009,7 +3032,6 @@ dev-scheme/guile:discouraged - (implied by deprecated) enable merely discouraged
 dev-scheme/guile:networking - Include networking interfaces
 dev-scheme/guile:regex - Include regular expression interfaces
 dev-scheme/kawa:awt - Assume AWT is available
-dev-scheme/kawa:echo2 - Enable support for the Echo2 web toolkit with dev-java/echo2
 dev-scheme/kawa:frontend - Build "kawa" front-end program using sys-libs/readline
 dev-scheme/kawa:jemacs - Build JEmacs
 dev-scheme/kawa:krl - Build BRL emulation and KRL
@@ -3403,6 +3425,7 @@ games-engines/odamex:portmidi - Enable portmidi support.
 games-engines/odamex:server - Build server target.
 games-engines/openmw:devtools - Install development tools like bsatool, esmtool and opencs.
 games-engines/renpy:development - Install IDE for game developers and an empty game template
+games-engines/residualvm:mpeg2 - enable mpeg2 codec for cutscenes
 games-engines/scummvm:fluidsynth - compile with support for fluidsynth
 games-engines/scummvm:mpeg2 - enable mpeg2 codec for cutscenes
 games-engines/scummvm:unsupported - enable unsupported and/or broken game engines (you're on your own)
@@ -3585,6 +3608,7 @@ gnome-base/gdm:plymouth - Enable support for smooth transition from sys-boot/ply
 gnome-base/gnome:classic - Install gnome-extra/gnome-shell-extensions for the Gnome Shell Classic mode
 gnome-base/gnome:extras - Install additional GNOME applications
 gnome-base/gnome-control-center:colord - Support color management using x11-misc/colord
+gnome-base/gnome-control-center:flickr - Add support for using photos from flickr as desktop background
 gnome-base/gnome-control-center:gnome-online-accounts - Enable configuration panel for net-libs/gnome-online-accounts accounts
 gnome-base/gnome-control-center:ibus - Enable support for enhanced input methods through app-i18n/ibus
 gnome-base/gnome-desktop:license-docs - Install help files documenting GNOME's licenses
@@ -3595,6 +3619,7 @@ gnome-base/gnome-extra-apps:tracker - Install the app-misc/tracker indexer and t
 gnome-base/gnome-keyring:ssh-agent - Use GNOME Keyring to unlock SSH keys. Recommended unless you are using ECDSA or Ed25519 keys.
 gnome-base/gnome-light:gnome-shell - Install gnome-base/gnome-shell and x11-wm/mutter for the standard GNOME 3 desktop mode
 gnome-base/gnome-session:consolekit - Support sys-auth/consolekit for session tracking
+gnome-base/gnome-session:elogind - Support sys-auth/elogind for session tracking
 gnome-base/gnome-settings-daemon:colord - Support color management using x11-misc/colord
 gnome-base/gnome-settings-daemon:elogind - Rely on sys-auth/elogind as runtime logind provider
 gnome-base/gnome-settings-daemon:openrc-force - Skip systemd dependency (#480336), enabling this flag will become your setup to be fully unsupported by upstream and downstream Gnome team. Do not try to enable it unless completely needed
@@ -3623,6 +3648,7 @@ gnome-base/nautilus:sendto - Enable the nautilus-sendto extension to send files
 gnome-base/nautilus:tracker - Add support for app-misc/tracker search
 gnome-base/orbit:pic - Force libname-server-2 to be built as PIC; needed on hardened systems
 gnome-extra/cinnamon-control-center:colord - Support color management using x11-misc/colord
+gnome-extra/cinnamon-session:elogind - Rely on sys-auth/elogind as runtime logind provider
 gnome-extra/cinnamon-settings-daemon:colord - Support color management using x11-misc/colord
 gnome-extra/eiciel:nautilus - Build gnome-base/nautilus extension
 gnome-extra/evolution-data-server:api-doc-extras - Build documentation for private APIs
@@ -3641,6 +3667,7 @@ gnome-extra/gnome-commander:taglib - Add metadata support for ID3, Vorbis, FLAC
 gnome-extra/gnome-commander:unique - Enable single instance support using dev-libs/libunique
 gnome-extra/gnome-contacts:telepathy - Start chat from contact details
 gnome-extra/gnome-dvb-daemon:totem - Build a plugin for media-video/totem
+gnome-extra/gnome-shell-extension-gsconnect:nautilus - Install Nautilus extension for sending files via GSConnect
 gnome-extra/gnome-software:firmware - Enable firmware update support through sys-apps/fwupd
 gnome-extra/gnome-system-monitor:systemd - Display sys-apps/systemd metadata, e.g. unit names, for running processes
 gnome-extra/libgda:canvas - Enable support for x11-libs/goocanvas
@@ -3893,12 +3920,14 @@ lxde-base/lxdm:consolekit - Enables support for authorization using consolekit
 lxde-base/lxdm:gtk3 - Use GTK+3 instead of 2
 lxde-base/lxterminal:gtk3 - Use GTK+3 instead of GTK+2
 lxqt-base/lxqt-config:monitor - Build monitor settings tool
+lxqt-base/lxqt-config:touchpad - Build touchpad settings tool
 lxqt-base/lxqt-meta:about - Install lxqt-base/lxqt-about
 lxqt-base/lxqt-meta:admin - Install lxqt-base/lxqt-admin
 lxqt-base/lxqt-meta:filemanager - Install x11-misc/pcmanfm-qtfile manager
 lxqt-base/lxqt-meta:lightdm - Install x11-misc/lightdmdisplay manager
 lxqt-base/lxqt-meta:lximage - Install media-gfx/lximage-qtimage viewer
 lxqt-base/lxqt-meta:minimal - Do not install x11-wm/openboxwindow manager
+lxqt-base/lxqt-meta:nls - Install dev-qt/qttranslations to better support different locales
 lxqt-base/lxqt-meta:powermanagement - Install lxqt-base/lxqt-powermanagement package
 lxqt-base/lxqt-meta:processviewer - Install x11-misc/qps package
 lxqt-base/lxqt-meta:screenshot - Install x11-misc/screengrab package
@@ -4344,6 +4373,7 @@ media-gfx/pstoedit:flash - Enable media-libs/ming SWF support
 media-gfx/pstoedit:pptx - Enable support for generating PowerPoint pptx files
 media-gfx/qimgv:video - Add support for gif/webm playback via libmpv
 media-gfx/qiv:magic - Use libmagic to determine mimetypes
+media-gfx/shotwell:opencv - Enable face detection via media-libs/opencv
 media-gfx/sigal:s3 - Enables support for the Amazon S3 service.
 media-gfx/simple-scan:colord - Support color management using x11-misc/colord
 media-gfx/slic3r:gui - Enable GUI
@@ -4515,6 +4545,7 @@ media-libs/mesa:gallium - Build drivers based on Gallium3D, the new architecture
 media-libs/mesa:gbm - Enable the Graphics Buffer Manager for EGL on KMS.
 media-libs/mesa:gles1 - Enable GLESv1 support.
 media-libs/mesa:gles2 - Enable GLESv2 support.
+media-libs/mesa:libglvnd - Use libglvnd for dispatch.
 media-libs/mesa:llvm - Enable LLVM backend for Gallium3D.
 media-libs/mesa:opencl - Enable the Clover Gallium OpenCL state tracker.
 media-libs/mesa:osmesa - Build the Mesa library for off-screen rendering.
@@ -4524,6 +4555,7 @@ media-libs/mesa:unwind - Add support for stack trace unwinding and function name
 media-libs/mesa:valgrind - Compile in valgrind memory hints
 media-libs/mesa:vdpau - Enable the VDPAU acceleration interface for the Gallium3D Video Layer.
 media-libs/mesa:vulkan - Enable Vulkan drivers
+media-libs/mesa:vulkan-overlay - Build vulkan-overlay-layer which displays Frames Per Second and other statistics
 media-libs/mesa:wayland - Enable support for dev-libs/wayland
 media-libs/mesa:xa - Enable the XA (X Acceleration) API for Gallium3D.
 media-libs/mesa:xvmc - Enable the XvMC acceleration interface for the Gallium3D Video Layer.
@@ -4589,7 +4621,7 @@ media-libs/sdl-mixer:mod - basic support for MOD files
 media-libs/sdl-mixer:playtools - Install playwave and playmus tools (useful for testing)
 media-libs/sdl-mixer:smpeg - Use media-libs/smpeg for MP3 support
 media-libs/sdl-mixer:wav - support WAVE files
-media-libs/sdl-sound:physfs - Enable physfs support
+media-libs/sdl-sound:physfs - Enable support for various formats through dev-games/physfs.
 media-libs/sdl2-image:webp - support loading WEBP images
 media-libs/sdl2-mixer:fluidsynth - Use media-sound/fluidsynth for MIDI support
 media-libs/sdl2-mixer:midi - basic support for MIDI files
@@ -4717,6 +4749,7 @@ media-sound/alsa-utils:libsamplerate - install utils that use libsamplerate (e.g
 media-sound/alsa-utils:ncurses - install utils that use ncurses (e.g. alsamixer)
 media-sound/alsaplayer:id3tag - Enables ID3 tagging with id3tag library
 media-sound/amsynth:dssi - Enable support for DSSI Soft Synth Interface
+media-sound/amsynth:lv2 - Add support for Ladspa V2
 media-sound/apulse:sdk - Install PulseAudio headers and pkg-config files. Be aware apulse is not a full PulseAudio replacement by design and some functionality may be missing.
 media-sound/aqualung:ifp - Enable support for iRiver iFP portable audio players
 media-sound/aqualung:lua - Enable support for programmable title formatting with dev-lang/lua
@@ -5154,6 +5187,7 @@ media-video/ffmpeg:libilbc - Enables iLBC de/encoding via media-libs/libilbc.
 media-video/ffmpeg:librtmp - Enables Real Time Messaging Protocol using librtmp (media-video/rtmpdump) in addition to FFmpeg's native implementation.
 media-video/ffmpeg:libsoxr - Enables audio resampling through media-libs/soxr.
 media-video/ffmpeg:libv4l - Uses media-libs/libv4l for video4linux instead of direct calls. Adds support for more devices via the userspace library.
+media-video/ffmpeg:libxml2 - Uses dev-libs/libxml2 to enable dash demuxing support.
 media-video/ffmpeg:lv2 - Enables lv2 audio filter wrapper.
 media-video/ffmpeg:mipsdspr1 - Enables MIPS DSP ASE R1 optimizations.
 media-video/ffmpeg:mipsdspr2 - Enables MIPS DSP ASE R2 optimizations.
@@ -5186,6 +5220,7 @@ media-video/handbrake:fdk - Support for encoding AAC using media-libs/fdk-aac.
 media-video/handbrake:gstreamer - Support for the streaming media framework from media-libs/gstreamer.
 media-video/handbrake:gtk - Install the GTK UI, ghb.
 media-video/handbrake:libav-aac - Support for encoding AAC using media-video/libav's internal encoder.
+media-video/handbrake:nvenc - Adds support for NVIDIA Encoder (NVENC) API for hardware accelerated encoding on NVIDIA cards.
 media-video/handbrake:x265 - Support for encoding h265 using media-libs/x265.
 media-video/kino:gpac - Enable GPAC support when exporting to 3GPP format
 media-video/kmplayer:npp - Compile the npp backend that plays xembed style browser plugins.
@@ -5437,6 +5472,7 @@ net-analyzer/goaccess:tokyocabinet - Enable Tokyo Cabinet's on-memory hash datab
 net-analyzer/gr-fosphor:glfw - enable GLFW based interface
 net-analyzer/graphite-web:carbon - Enable carbon support
 net-analyzer/graphite-web:memcached - Enable memcached support
+net-analyzer/greenbone-security-assistant:extras - Pdf results, extra fonts, html docs support
 net-analyzer/hexinject:experimental - Install experimental packets.tcl
 net-analyzer/hexinject:tools - Install hex2raw and prettypacket tools
 net-analyzer/httping:tfo - Enable support for TCP Fast Open
@@ -5533,7 +5569,18 @@ net-analyzer/nrpe:command-args - Build support for specifying the command-line a
 net-analyzer/nrpe:minimal - Only build the check plugins for Nagios/Icinga, and not the daemon.
 net-analyzer/nsca:crypt - Build support for crypted communication with nsca, through dev-libs/libmcrypt. It's recommended not to disable this flag unless all the communication will be handled in an absolutely safe environment.
 net-analyzer/nsca:minimal - Only build and install the send_nsca command and not the daemon. This allows a very minimal install with no overhead when setting up a node.
-net-analyzer/openvas:pdf - Enable pdf report creation
+net-analyzer/openvas:cli - Command Line Interface for OpenVAS Scanner throught net-analyzer/gvm-tools
+net-analyzer/openvas:extras - Extra fonts, pdf results and html docs support
+net-analyzer/openvas:gsa - Greenbone Security Assistant (WebUI) through net-analyzer/greenbone-security-assistant
+net-analyzer/openvas:ldap - Enable support for ldap through net-nds/openldap
+net-analyzer/openvas:ospd - Enable support for scanner wrappers through net-analyzer/ospd
+net-analyzer/openvas:radius - Enable support for radius through net-dialup/freeradius-client
+net-analyzer/openvas-libraries:extras - Html docs support
+net-analyzer/openvas-libraries:ldap - Enable support for ldap
+net-analyzer/openvas-libraries:radius - Enable support for radius
+net-analyzer/openvas-manager:extras - Html docs support
+net-analyzer/openvas-scanner:extras - Html docs support
+net-analyzer/ospd:extras - Html docs support
 net-analyzer/ossec-hids:agent - Build "agent" installation target (see package description)
 net-analyzer/ossec-hids:hybrid - Build "hybrid" installation target
 net-analyzer/ossec-hids:local - Build "local" installation target
@@ -5618,16 +5665,14 @@ net-analyzer/wapiti:kerberos - Support Kerberos authentication
 net-analyzer/wapiti:ntlm - Support NTLM authentication
 net-analyzer/wireshark:adns - Use net-dns/c-ares to resolve DNS names
 net-analyzer/wireshark:androiddump - Install androiddump, an extcap interface to capture from Android devices
-net-analyzer/wireshark:bcg729 - Use media-plugins/mediastreamer-bcg729 to play G.729 codec
+net-analyzer/wireshark:bcg729 - Use media-libs/bcg729 for G.729 codec support in RTP Player
 net-analyzer/wireshark:capinfos - Install capinfos, to print information about capture files
 net-analyzer/wireshark:captype - Install captype, to print the file types of capture files
 net-analyzer/wireshark:ciscodump - Install ciscodump, extcap interface to capture from a remote Cisco router
 net-analyzer/wireshark:dftest - Install dftest, to display filter byte-code, for debugging dfilter routines
-net-analyzer/wireshark:doc-pdf - Build documentation in pdf format (US and a4 paper sizes)
 net-analyzer/wireshark:dpauxmon - Install dpauxmon, an external capture interface (extcap) that captures DisplayPort AUX channel data from linux kernel drivers
 net-analyzer/wireshark:dumpcap - Install dumpcap, to dump network traffic from inside wireshark
 net-analyzer/wireshark:editcap - Install editcap, to edit and/or translate the format of capture files
-net-analyzer/wireshark:libssh - Use net-libs/libssh (for sshdump)
 net-analyzer/wireshark:libxml2 - Use dev-libs/libxml2 for handling XML configuration in dissectors
 net-analyzer/wireshark:lz4 - Use app-arch/lz4 for compression/decompression
 net-analyzer/wireshark:maxminddb - Use dev-libs/libmaxminddb for IP address geolocation
@@ -5946,7 +5991,7 @@ net-im/choqok:telepathy - Enable support for the real-time communication framewo
 net-im/corebird:spellcheck - Support spell checking
 net-im/coturn:mongodb - Enable support for the mongodb database
 net-im/coturn:redis - Enable support for the redis database
-net-im/dino:gnupg - Enable OpenPGP encryption plugin
+net-im/dino:gpg - Enable OpenPGP encryption plugin
 net-im/dino:http - Enable HTTP file upload plugin
 net-im/dino:omemo - Enable OMEMO encryption plugin
 net-im/discord-bin:pax_kernel - Triggers a paxmarking of the binary
@@ -5964,15 +6009,10 @@ net-im/ejabberd:roster-gw - Turn on workaround for processing gateway subscripti
 net-im/ejabberd:sqlite - Enable SQLite database support
 net-im/ejabberd:zlib - Enable Stream Compression (XEP-0138) using zlib
 net-im/ekg2:gadu - Enable Gadu-Gadu protocol support (requires net-libs/libgadu).
-net-im/ekg2:gif - GIF token support for Gadu-Gadu protocol.
-net-im/ekg2:gnutls - Enable SSL/TLS support through GnuTLS for the plugins supporting it. If 'ssl' is enabled too, GnuTLS will be preferred where possible (and OpenSSL will be used elsewhere).
 net-im/ekg2:gpg - Enable jabber message encryption through app-crypt/gpgme.
-net-im/ekg2:jpeg - JPEG token support for Gadu-Gadu protocol.
 net-im/ekg2:minimal - Disable building extra plugins with no additional deps.
 net-im/ekg2:openssl - Support encryption in sim plugin, using OpenSSL.
-net-im/ekg2:oracle - Support logging messages into Oracle database.
 net-im/ekg2:sqlite - Support logging messages into SQLite3 database.
-net-im/ekg2:ssl - Enable the complete SSL/TLS support through OpenSSL. This also enables the 'sim' plugin which relies on OpenSSL.
 net-im/empathy:gnome-online-accounts - Enable using net-libs/gnome-online-accounts for authorization (e.g. for Google Talk)
 net-im/empathy:map - Enable world map support through media-libs/libchamplain
 net-im/err:irc - Pull optional dependencies, needed for IRC backend
@@ -6222,7 +6262,6 @@ net-libs/libbitcoinconsensus:asm - Enable assembly for optimization
 net-libs/libbitcoinconsensus:knots - Build enhanced Bitcoin Knots version, rather than Bitcoin Core
 net-libs/libbtbb:extras - Install pcapdump and btaptap tools
 net-libs/libbtbb:wireshark-plugins - Build the wireshark plugins for bluetooth baseband sniffing
-net-libs/libeXosip:srv - enable support for SRV records DNS queries
 net-libs/libesmtp:ntlm - Enable support for NTLM authentication
 net-libs/libetpan:liblockfile - Enable support for liblockfile library
 net-libs/libetpan:lmdb - Use dev-db/lmdb as cache DB
@@ -6249,6 +6288,7 @@ net-libs/libproxy:gnome - Enable support for reading proxy settings from GNOME
 net-libs/libproxy:kde - Enable support for reading proxy settings from KDE
 net-libs/libproxy:spidermonkey - Use libmozjs from dev-lang/spidermonkey for PAC parsing
 net-libs/libproxy:webkit - Use libjavascriptcoregtk from net-libs/webkit-gtk for PAC parsing
+net-libs/libpsl:man - Build man-pages
 net-libs/libqmi:mbim - Support QMI over Mobile Broadband Interface Model (MBIM)
 net-libs/libsoup:gssapi - Enable GSSAPI support
 net-libs/libsoup:samba - Use net-fs/samba for NTLM Single Sign-On
@@ -6789,7 +6829,8 @@ net-misc/ptpd:slave-only - Enable slave only operation (remove master mode funct
 net-misc/ptpd:snmp - Require net-analyzer/net-snmp to enable SNMP configuration
 net-misc/ptpd:statistics - Enable compution of statistics
 net-misc/putty:gssapi - Enable support for GSSAPI (virtual/krb5)
-net-misc/putty:gtk - Build the PuTTY client which requires x11-libs/gtk+:3. If disabled only the CLI tools puttygen, plink, pscp and psftp will be built.
+net-misc/putty:gtk - Build the PuTTY client which requires x11-libs/gtk+. If disabled only the CLI tools puttygen, plink, pscp and psftp will be built
+net-misc/putty:gtk2 - Build the PuTTY client with x11-libs/gtk+:2 instead of x11-libs/gtk+:3
 net-misc/quagga:bgpclassless - Apply unofficial patch to enable classless prefixes for BGP. Patch and information to be found at http://hasso.linux.ee/doku.php/english:network:quagga
 net-misc/quagga:fpm - Enable Forwarding Plane Manager support
 net-misc/quagga:multipath - Enable multipath routes support for any number of routes
@@ -7045,6 +7086,7 @@ net-proxy/privoxy:extended-host-patterns - Enable and require PCRE syntax in hos
 net-proxy/privoxy:external-filters - Allow to filter content with scripts and programs. Experimental
 net-proxy/privoxy:fast-redirects - Support fast redirects
 net-proxy/privoxy:force - Allow single-page disable (force load)
+net-proxy/privoxy:fuzz - Exposes Privoxy internals to input from files or stdout. Intended for fuzzing testing
 net-proxy/privoxy:graceful-termination - Allow to shutdown Privoxy through the webinterface
 net-proxy/privoxy:ie-images - Enable a quick but not always reliable auto-detect whether requests from MS Internet Explorer are for an image or not
 net-proxy/privoxy:image-blocking - Allows the +handle-as-image action, to send "blocked" images instead of HTML
@@ -7080,11 +7122,6 @@ net-proxy/tsocks:server-lookups - Allow hostname resolution _for_ SOCKS servers
 net-proxy/tsocks:tordns - Apply tordns patch which allows transparent TORification of the DNS queries
 net-proxy/ufdbguard:doc - Download and install the ufdbguard reference manual in PDF.
 net-proxy/ufdbguard:httpd - Build, install and start the provided mini-http daemon with the redirect CGI integrated. Since there is no way to tell ufdbguard to not start it, this is a build-time option.
-net-voip/linphone:assistant - Turn on assistant compiling (needs gtk enabled)
-net-voip/linphone:gsm-nonstandard - Support non-standard GSM frequencies
-net-voip/linphone:sqlite - Turn on compilation of message storage
-net-voip/linphone:tools - Compile tools
-net-voip/linphone:video - Enable video support (display/capture)
 net-voip/telepathy-gabble:plugins - Enable plugin loader
 net-voip/yate:amrnb - use AMR-NB
 net-voip/yate:dahdi - Enable Dahdi driver
@@ -7991,13 +8028,14 @@ sys-apps/portage:xattr - Preserve extended attributes (filesystem-stored metadat
 sys-apps/portage-mgorny:ipc - Use inter-process communication between Portage and running ebuilds.
 sys-apps/portage-mgorny:native-extensions - Compiles native "C" extensions (speedups, instead of using Python backup code). Currently includes libc-locales. This should only be temporarily disabled for some bootstrapping operations. Cross-compilation is not supported.
 sys-apps/portage-mgorny:xattr - Preserve extended attributes (filesystem-stored metadata) when installing files. Usually only required for hardened systems.
-sys-apps/proot:care - Build dynamic CARE binary (more info - http://reproducible.io/)
+sys-apps/proot:care - Build dynamic CARE binary (more info - https://proot-me.github.io)
 sys-apps/qingy:consolekit - Enable native consolekit support
 sys-apps/qingy:opensslcrypt - Encrypt communications between qingy and its GUI using dev-libs/openssl
 sys-apps/razercfg:pm-utils - Installs the pm-utils hooks for suspend/resume and requires sys-power/pm-utils
 sys-apps/ripgrep:man - Build and install man pages.
 sys-apps/rng-tools:jitterentropy - Enable Jitter RNG entropy support
 sys-apps/rng-tools:nistbeacon - Enable NIST beacon entropy support
+sys-apps/rng-tools:pkcs11 - Enable PKCS11 entropy support
 sys-apps/roccat-tools:input_devices_roccat_ryosmkfx - Enable support for Ryos Mk FX keyboard.
 sys-apps/roccat-tools:input_devices_roccat_skeltr - Enable support for Skeltr keyboard.
 sys-apps/roccat-tools:input_devices_roccat_sova - Enable support for Sova keyboard.
@@ -8159,7 +8197,6 @@ sys-cluster/ceph:libaio - Use libaio as asynchronous input/output library
 sys-cluster/ceph:libatomic - Use libatomic instead of builtin atomic operations
 sys-cluster/ceph:lttng - Add support for LTTng
 sys-cluster/ceph:mgr - Build the ceph-mgr daemon
-sys-cluster/ceph:mgr-frontend - Build the mgr/dashboard frontend with npm, this is not required for the frontend to work
 sys-cluster/ceph:nss - Use dev-libs/nss for cryptography
 sys-cluster/ceph:radosgw - Add radosgw support
 sys-cluster/ceph:system-boost - Use system dev-libs/boost instead of the bundled one
@@ -8302,7 +8339,6 @@ sys-devel/binutils-hppa64:multitarget - Adds support to binutils for cross compi
 sys-devel/binutils-hppa64:plugins - Enable plugin support in tools
 sys-devel/clang:default-compiler-rt - Use compiler-rt instead of libgcc as the default rtlib for clang
 sys-devel/clang:default-libcxx - Use libc++ instead of libstdc++ as the default stdlib for clang
-sys-devel/clang:multitarget - Build all host targets (default: host only)
 sys-devel/clang:static-analyzer - Install the Clang static analyzer
 sys-devel/clang:z3 - Enable the static analyzer constraint manager backend using sci-mathematics/z3
 sys-devel/clang-runtime:compiler-rt - Install sys-libs/compiler-rt for -rtlib=compiler-rt
@@ -8342,21 +8378,15 @@ sys-devel/gdb:lzma - Support lzma compression in ELF debug info
 sys-devel/gdb:multitarget - Support all known targets in one gdb binary
 sys-devel/gdb:python - Enable support for the new internal scripting language, as well as extended pretty printers
 sys-devel/gdb:server - Install the "gdbserver" program (useful for embedded/remote targets)
+sys-devel/gdb:source-highlight - Enable listing highlighting via dev-util/source-highlight
 sys-devel/gdb:xml - Support parsing XML data files needed (at least) for cpu features, memory maps, and syscall tracing
 sys-devel/gettext:cvs - When running `autopoint`, use cvs to store the internal development files; this requires cvs at runtime, but will be faster/smaller than raw archives
 sys-devel/gettext:git - When running `autopoint`, use git to store the internal development files; this requires git at runtime, but will be faster/smaller than raw archives
 sys-devel/kgcc64:regression-test - Run the testsuite and install the results (requires FEATURES=test)
-sys-devel/llvm:clang - Build the clang C/C++ compiler
-sys-devel/llvm:default-compiler-rt - Use compiler-rt instead of libgcc as the default rtlib for clang
-sys-devel/llvm:default-libcxx - Use libc++ instead of libstdc++ as the default stdlib for clang
 sys-devel/llvm:doc - Build and install the HTML documentation and regenerate the man pages
 sys-devel/llvm:exegesis - Enable performance counter support for llvm-exegesis tool that can be used to measure host machine instruction characteristics
 sys-devel/llvm:gold - Build the gold linker plugin
-sys-devel/llvm:lldb - Build the lldb debugger
-sys-devel/llvm:multitarget - Build all host targets (default: host only)
 sys-devel/llvm:ncurses - Support querying terminal properties using ncurses' terminfo
-sys-devel/llvm:sanitize - Build compiler-rt's sanitizers
-sys-devel/llvm:static-analyzer - Install the Clang static analyzer (requires USE=clang)
 sys-devel/llvm:xar - Support dumping LLVM bitcode sections in Mach-O files (uses app-arch/xar)
 sys-devel/parity:vc10_0 - Enable support for Visual Studio 2010
 sys-devel/parity:vc11_0 - Enable support for Visual Studio 2012
@@ -8430,6 +8460,14 @@ sys-fs/btrfs-progs:zstd - Enable zstd compression support.
 sys-fs/btrfsmaintenance:systemd - Enable systemd services and timers instead of cron timers
 sys-fs/cryfs:custom-optimization - Use user-defined compiler optimization level
 sys-fs/cryfs:update-check - Enable automatic checking for updates and security vulnerabilities
+sys-fs/cryptmount:argv0switch - Default action given by progname.
+sys-fs/cryptmount:cswap - Enable support for encrypted swap.
+sys-fs/cryptmount:fsck - Check filesystems before mounting.
+sys-fs/cryptmount:gcrypt - Support libgcrypt-encryption of keys.
+sys-fs/cryptmount:largefile - Enable support for large files.
+sys-fs/cryptmount:luks - Enable key management via LUKS
+sys-fs/cryptmount:mount - Use systemd mount/umount for operations.
+sys-fs/cryptmount:openssl - Support openssl-encryption of keys.
 sys-fs/cryptsetup:argon2 - Enable password hashing algorithm from app-crypt/argon2
 sys-fs/cryptsetup:gcrypt - Use dev-libs/libgcrypt crypto backend
 sys-fs/cryptsetup:kernel - Use kernel crypto backend (mainly for embedded systems)
@@ -8540,6 +8578,7 @@ sys-libs/glibc:gd - build memusage and memusagestat tools
 sys-libs/glibc:multiarch - enable optimizations for multiple CPU architectures (detected at runtime)
 sys-libs/glibc:nscd - Build, and enable support for, the Name Service Cache Daemon
 sys-libs/glibc:rpc - Enable obsolete RPC/NIS layers
+sys-libs/glibc:ssp - protect stack of glibc internals
 sys-libs/glibc:suid - Make internal pt_chown helper setuid -- not needed if using Linux and have /dev/pts mounted with gid=5
 sys-libs/glibc:systemtap - enable systemtap static probe points
 sys-libs/gwenhywfar:designer - Build plugins for dev-qt/designer
@@ -8818,6 +8857,7 @@ www-client/netsurf:rosprite - RISC OS Sprite bitmap image support (media-libs/li
 www-client/netsurf:svgtiny - SVG image support via media-libs/svgatiny instead of gnome-base/librsvg
 www-client/opera:gtk - Install support libraries and runtime dependencies to support GTK+/GNOME desktop integration
 www-client/otter:webengine - Use dev-qt/qtwebengine as backend instead of dev-qt/qtwebkit (experimental)
+www-client/qutebrowser:scripts - Installs userscripts from the misc/userscripts directory to /usr/share/qutebrowser/userscripts.
 www-client/seamonkey:calendar - Build Mozilla's calendar
 www-client/seamonkey:chatzilla - Build Mozilla's IRC client (default on)
 www-client/seamonkey:custom-optimization - Build with user-specified compiler optimizations (-Os, -O0, -O1, -O2, -O3) from CFLAGS (unsupported)
@@ -9048,6 +9088,7 @@ x11-misc/colord:gusb - Enable dev-libs/libgusb support, needed for colorimeter d
 x11-misc/compton:drm - Enable VSync with DRM_IOCTL_WAIT_VBLANK
 x11-misc/compton:opengl - Enable VSync with SGI_swap_control OpenGL extension
 x11-misc/dunst:dunstify - Experimental replacement for notify-send.
+x11-misc/e16-keyedit:gtk2 - Build with x11-libs/gtk+:2 instead of x11-libs/gtk+:3
 x11-misc/fbpager:xrender - Enable transparency support via x11-libs/libXrender
 x11-misc/gpaste:applet - Enable gpaste-applet
 x11-misc/gpaste:gnome - Enable proper gnome support and enable gnome shell extension.
@@ -9106,6 +9147,8 @@ x11-misc/xscreensaver:new-login - Enable user switching support using gdmflexise
 x11-misc/xsr:cursor - Capture mouse cursor using x11-misc/xdotool, and place them on the screenshots using media-gfx/imagemagick
 x11-misc/xss-lock:man - Build and install man pages
 x11-plugins/bfm:gkrellm - Enable building of app-admin/gkrellm module
+x11-plugins/e16-epplets:cdaudio - Enable CD Audio support using media-libs/libcdaudio
+x11-plugins/e16-epplets:libgtop - Use gnome-base/libgtop to obtain system load information
 x11-plugins/pidgin-mbpurple:twitgin - Enable graphical plugin for Gtk+ interface of Pidgin.
 x11-plugins/pidgin-sipe:ocs2005-message-hack - Disable message timeout for OCS2005 clients which causes "false" not delivered error messages
 x11-plugins/pidgin-sipe:openssl - Enable crypto support via dev-libs/openssl
@@ -9191,6 +9234,20 @@ x11-themes/zuki-themes:gnome-shell - Install theme for gnome-base/gnome-shell
 x11-themes/zuki-themes:mate - Install Metacity theme for mate-base/mate
 x11-themes/zuki-themes:xfce - Install theme for xfce-base/xfwm4
 x11-themes/zukitwo:gnome-shell - Install theme for gnome-base/gnome-shell
+x11-wm/e16:container - Use container window (experimental)
+x11-wm/e16:debug - Build libtrip debugging library
+x11-wm/e16:dialogs - Enable support for configuration dialogs
+x11-wm/e16:libhack - Build libhack window mode helper library
+x11-wm/e16:modules - Enable support for loadable modules
+x11-wm/e16:pango - Enable pango font rendering using x11-libs/pango
+x11-wm/e16:themes - Install the official E16 themes using x11-themes/e16-themes
+x11-wm/e16:xi2 - Enable the experimental multipointer input XInput2. This incldues the MultiPointer X feature
+x11-wm/e16:xpresent - Enable support for the X Present extension via x11-libs/libXpresent
+x11-wm/e16:xrandr - Enable support for the X RandR extension via x11-libs/libXrandr
+x11-wm/e16:xrender - Enable transparency support using the X Render extension via x11-libs/libXrender
+x11-wm/e16:xsm - Enable X Session Management support using x11-libs/libSM
+x11-wm/e16:xsync - Enable X Sync support
+x11-wm/e16:zoom - Support resolution change of current window (zoom) usingx11-libs/libXxf86vm (xvidtune)
 x11-wm/echinus:xrandr - Enable support for multihead configuration
 x11-wm/enlightenment:packagekit - Enable module for package manager integration
 x11-wm/fluxbox:bidi - Enable bidirectional language support with dev-libs/fribidi