reinit the tree, so we can have metadata

8 files changed, 148 insertions, 0 deletions

diff --git a/sys-auth/nss-pam-ldapd/files/nslcd-init-r1 b/sys-auth/nss-pam-ldapd/files/nslcd-init-r1
new file mode 100644
index 000000000000..776a7b3009e0
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nslcd-init-r1
@@ -0,0 +1,36 @@
+#!/sbin/openrc-run
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+extra_commands="checkconfig"
+cfg="/etc/nslcd.conf"
+
+depend() {
+	need net	
+	use dns logger
+}
+
+checkconfig() {
+	if [ ! -f "$cfg" ] ; then
+		eerror "Please create $cfg"
+		eerror "Example config: /usr/share/nss-ldapd/nslcd.conf"
+		return 1
+	fi
+	return 0
+}
+
+start() {
+    checkpath -q -d /run/nslcd -o nslcd:nslcd
+	checkconfig || return $?
+
+	ebegin "Starting nslcd"
+	start-stop-daemon --start --pidfile /var/run/nslcd/nslcd.pid \
+		--exec /usr/sbin/nslcd
+	eend $? "Failed to start nslcd"
+}
+
+stop() {
+	ebegin "Stopping nslcd"
+	start-stop-daemon --stop --pidfile /var/run/nslcd/nslcd.pid
+	eend $? "Failed to stop nslcd"
+}
diff --git a/sys-auth/nss-pam-ldapd/files/nslcd-init-r2 b/sys-auth/nss-pam-ldapd/files/nslcd-init-r2
new file mode 100644
index 000000000000..55ef9a53774f
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nslcd-init-r2
@@ -0,0 +1,28 @@
+#!/sbin/openrc-run
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+command=/usr/sbin/nslcd
+pidfile=/var/run/nslcd/nslcd.pid
+extra_commands="checkconfig"
+cfg="/etc/nslcd.conf"
+
+depend() {
+	need net	
+	use dns logger
+}
+
+checkconfig() {
+	if [ ! -f "$cfg" ] ; then
+		eerror "Please create $cfg"
+		eerror "Example config: /usr/share/nss-ldapd/nslcd.conf"
+		return 1
+	fi
+	return 0
+}
+
+start_pre() {
+	checkpath -q -d /run/nslcd -o nslcd:nslcd
+	checkconfig
+	return $?
+}
diff --git a/sys-auth/nss-pam-ldapd/files/nslcd-run-s6 b/sys-auth/nss-pam-ldapd/files/nslcd-run-s6
new file mode 100644
index 000000000000..264da009ba11
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nslcd-run-s6
@@ -0,0 +1,3 @@
+#!/bin/sh
+exec 2>&1
+exec /usr/sbin/nslcd -n
diff --git a/sys-auth/nss-pam-ldapd/files/nslcd-tmpfiles.conf b/sys-auth/nss-pam-ldapd/files/nslcd-tmpfiles.conf
new file mode 100644
index 000000000000..ac4ee0ad8649
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nslcd-tmpfiles.conf
@@ -0,0 +1 @@
+d /run/nslcd 0755 nslcd nslcd -
diff --git a/sys-auth/nss-pam-ldapd/files/nslcd.service b/sys-auth/nss-pam-ldapd/files/nslcd.service
new file mode 100644
index 000000000000..030cc2c90eb1
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nslcd.service
@@ -0,0 +1,14 @@
+[Unit]
+Description=NSS and PAM LDAP client daemon
+After=network-online.target
+Wants=network-online.target nss-lookup.target syslog.service
+Before=nss-user-lookup.target
+
+[Service]
+Type=forking
+PIDFile=/var/run/nslcd/nslcd.pid
+ExecStart=/usr/sbin/nslcd
+
+[Install]
+WantedBy=multi-user.target
+RequiredBy=nss-user-lookup.target
diff --git a/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.4-disable-py3-only-linters.patch b/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.4-disable-py3-only-linters.patch
new file mode 100644
index 000000000000..06dcc2513a39
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.4-disable-py3-only-linters.patch
@@ -0,0 +1,13 @@
+diff --git a/tests/pylint.rc b/tests/pylint.rc
+index 7f0bc13..b66d018 100644
+--- a/tests/pylint.rc
++++ b/tests/pylint.rc
+@@ -19,7 +19,7 @@ enable=
+ # can either give multiple identifier separated by comma (,) or put this option
+ # multiple time (only on the command line, not in the configuration file where
+ # it should appear only once).
+-disable=E1101
++disable=E1101,E1608,E1606,E1601
+ 
+ 
+ [REPORTS]
diff --git a/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.8-pynslcd-module-paths.patch b/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.8-pynslcd-module-paths.patch
new file mode 100644
index 000000000000..11c86eff2e24
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/nss-pam-ldapd-0.9.8-pynslcd-module-paths.patch
@@ -0,0 +1,25 @@
+diff --git a/pynslcd/pynslcd.py b/pynslcd/pynslcd.py
+index d367a8c..9a52120 100755
+--- a/pynslcd.py
++++ b/pynslcd.py
+@@ -30,13 +30,13 @@ import threading
+ import daemon
+ import ldap
+ 
+-from tio import TIOStream
+-import cfg
+-import common
+-import constants
+-import invalidator
+-import mypidfile
+-import search
++from pynslcd.tio import TIOStream
++import pynslcd.cfg as cfg
++import pynslcd.common as common
++import pynslcd.constants as constants
++import pynslcd.invalidator as invalidator
++import pynslcd.mypidfile as mypidfile
++import pynslcd.search as search
+ 
+ 
+ # the name of the program
diff --git a/sys-auth/nss-pam-ldapd/files/pynslcd.initd b/sys-auth/nss-pam-ldapd/files/pynslcd.initd
new file mode 100644
index 000000000000..7b6540810aed
--- /dev/null
+++ b/sys-auth/nss-pam-ldapd/files/pynslcd.initd
@@ -0,0 +1,28 @@
+#!/sbin/openrc-run
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+command=/usr/sbin/pynslcd
+pidfile=/var/run/nslcd/nslcd.pid
+extra_commands="checkconfig"
+cfg="/etc/nslcd.conf"
+
+depend() {
+	need net	
+	use dns logger
+}
+
+checkconfig() {
+	if [ ! -f "$cfg" ] ; then
+		eerror "Please create $cfg"
+		eerror "Example config: /usr/share/nss-ldapd/nslcd.conf"
+		return 1
+	fi
+	return 0
+}
+
+start_pre() {
+	checkpath -q -d /run/nslcd -o nslcd:nslcd
+	checkconfig
+	return $?
+}