gentoo resync : 21.10.2017

4 files changed, 0 insertions, 1532 deletions

diff --git a/sys-cluster/heat/Manifest b/sys-cluster/heat/Manifest
index 06045a03b382..2b72f81437fb 100644
--- a/sys-cluster/heat/Manifest
+++ b/sys-cluster/heat/Manifest
@@ -1,17 +1,13 @@
 AUX heat.initd 1349 SHA256 6351d06084b740daebd7b4b225d0f953e576f32be269acd1e8793c6433473411 SHA512 a2a2f45bb4268260ca88d7cb5c2df1e9d27041bf36fa59aadc7e39d85b79aad6992c70a3e8f9d580a493801c75299ab99191df23624ad70139f30758d8027492 WHIRLPOOL 851a5ab7febd2d8901446db2a5682cdb1c12582a0a8320ec4650abdefed2229eedf4404d4faa68f050fd96362ba4bb21e00da61493994d380a4927257a5365ad
 AUX heat.initd-2 463 SHA256 2c7f4e524c7b8022aa5a68406655bdb3a47b9d6bd6a44329d9710c760ce14c82 SHA512 8f92853d6bb21e6efae3a59bc2856bd496498297e43a5aa0350a3202e8a709cfd0791f77017b77d8b7845c3cf0d2b266273026c9cac869e3dbc749e36bf83c7c WHIRLPOOL b3379ec3c880e423c121c2b9e25039005d587c8765ade235173816e1434a79c94cd3f7da09cc18ee6d30dcc8c2e45fb10c5722a5596ce08b93353c59c2efb16a
-AUX newton-heat.conf.sample 44580 SHA256 a14fcca8e128e588077fdcafbf991a383ac926bf621273a5925055a7faaebd33 SHA512 e96aad96d7b93c704ab03b7f9e6edb9ea20f6854f6d3fb79fe2bba800e7fc320e20cb1adec5d4b5f499dcb9f7dd786e54eae62670af43f4fc5681f3e6ce6fcf4 WHIRLPOOL 411b5963ff433eab8d572b44b39a98defc23a411e24169030a22b27e70d9957185d448e2d07caabe132dc71b3f95fddd4f4569e25d462faea1b749b5327bc96d
-DIST heat-7.0.6.tar.gz 2253662 SHA256 2881c02f265f961c78506ae2b0acdf7f74a7a294517f23b43dadad854dd53653 SHA512 49cdf09fd38e663fc35226d743ea54f64303c86ccda2071db77ca1df861da253226a453d194b4652fe1f5c542529200c16232d654d8b7c0d59e5cd5c9e215834 WHIRLPOOL 85fd932158f3024a8dbcd36a5bd2c3cacee453bb53c267a8de68dca3f4eafe6ea0bb22f8a6416fab958dd798469ca64685f4704f97bfe9f31ba3b87f561b9034
 DIST heat-8.0.4.tar.gz 2304762 SHA256 7997dac0f35ad7fb236536959a46e843dab56dbce5694849585cb97affbbb198 SHA512 9846114813b743ba9abfb4ce6e9d3cdcddfb81a242fda83a9d22a9fc30017fec2464f3b75364d9be38d50218e79485f3405e429fac1830d163c50737b07c2865 WHIRLPOOL 8420bffb6e2b86528d9104abb981368fa2fe36b33057b0e02f1fcf9e9106a4cd58bdb833e459e38a64bd47b2f4955e15f589673b57442184e3bcd60894feab4b
 DIST heat-9.0.0.tar.gz 2359104 SHA256 36dbb46b72bf7b495ba8812804da7d4e9bb59481743e6e0499e904efdf4ee7be SHA512 d60cfd69807af5a51da6d236e5ccf482a5fd65f8bb2e5e8287eca587f27d0af570979b554a311037904a7c01cd8dcba43a5ef577261fb7f12a557ba6ff2ec58e WHIRLPOOL 43f9afaa57e84e7e29bba4754d3b7499afece40961891dafd6bf75da3032f79806dee6d4de91e0afd24ad53b97cf615e91df46646ed39b2df05fa53d36a31527
 DIST heat.conf.sample-2017.1.9999 88798 SHA256 688a6fd65df3b9f004345c8cf739c5a553b6806213c399ac25846d1ad248e963 SHA512 5ea23f33ddc2b34414371a612041abd075694a7d63bb55efd1e75f313b4e9f35e0d68b420536bc474cd4896b0295d8763bdecbb07c71d29c462c14183159e560 WHIRLPOOL 9a91069136dcbf15d47a4b5df6521ca2740eb1a88feab57b28f2f921e517ae7557125b5ea877d4c9ed5314321c8de551270722809d270c1b8ae0245d2a75b515
 DIST heat.conf.sample-2017.2.9999 88901 SHA256 cb46fbbfa0e8ccccdc84c4637312f0d21b0c95037d2b3404623653c1b5eb0a92 SHA512 f62feaa4a0d27866876aed9f78099501247ae4b7deaefd04d77b1f4b2a1d1c991e6f3e68d9f82e3b6a4358c99fbffd90f14a05ff98105df0ef0db68ef8bc6932 WHIRLPOOL 284ad592883c8e42518872d603d097672056ba25a194569f31ee9244d1095f640f02097fda0a6539b47247ba580929d79ec173f1847bfc5e19bf45fb8cbe4720
 DIST heat.conf.sample-8.0.4 88798 SHA256 688a6fd65df3b9f004345c8cf739c5a553b6806213c399ac25846d1ad248e963 SHA512 5ea23f33ddc2b34414371a612041abd075694a7d63bb55efd1e75f313b4e9f35e0d68b420536bc474cd4896b0295d8763bdecbb07c71d29c462c14183159e560 WHIRLPOOL 9a91069136dcbf15d47a4b5df6521ca2740eb1a88feab57b28f2f921e517ae7557125b5ea877d4c9ed5314321c8de551270722809d270c1b8ae0245d2a75b515
 DIST heat.conf.sample-9.0.0 88901 SHA256 cb46fbbfa0e8ccccdc84c4637312f0d21b0c95037d2b3404623653c1b5eb0a92 SHA512 f62feaa4a0d27866876aed9f78099501247ae4b7deaefd04d77b1f4b2a1d1c991e6f3e68d9f82e3b6a4358c99fbffd90f14a05ff98105df0ef0db68ef8bc6932 WHIRLPOOL 284ad592883c8e42518872d603d097672056ba25a194569f31ee9244d1095f640f02097fda0a6539b47247ba580929d79ec173f1847bfc5e19bf45fb8cbe4720
-EBUILD heat-2016.2.9999.ebuild 5772 SHA256 e6809ac0a7ed08f165bae4d2be6714561d7da482eb48e3aefb6995823eec99ab SHA512 277ce6153525e4f4c8c3e98a8f11469cc1fab0be1e566b8830220a00f5ee493a8effa9e0e52d28ca4cbae82c5bdc4f127f76dc4b0b0d8b570889f47f559af963 WHIRLPOOL 3bcfb10b7d7b12991e2097d7c49733397ed57932b6a0a55a888a28e0ebc0fbda32d9145708451ea85abfbe80759964d697e59f2b06cd5ef50777e1cf0691519a
 EBUILD heat-2017.1.9999.ebuild 5666 SHA256 6a00fb00d27ca007fde4f73f112019af92cb6a5d79d578ff19a1cb05f7d1f368 SHA512 3b99e7e4b8fa48d17e72b2e404c818da31ba668f63d76f4404ff42a6862f0918e4b9ac91fdc95977dda98c931ebd893cadba35553dcb437f563b75905b6ce058 WHIRLPOOL 86a5eaf23be27bd19123ea137b1d3f78fe7b055c1855527677d619d45dd48ae9189d8a740927250f0eed193653c7cc3448b8a06da3c91d4935383506b21c53b9
 EBUILD heat-2017.2.9999.ebuild 6456 SHA256 2fe1669fee37a96e85605a9a968d9f3dbd1a8b2575af46b6c6d57584e4efd4aa SHA512 5f57c8610494a03382c9f2e60716eb221b26e39f56354637960bfc2166437e0d217297911460c8d34a60b5f2dc00e2aa00d10f8b17d0d025c7d5341510e53a7f WHIRLPOOL de4d89ebd301252ca63cb967abee76d6cb6d4ddacfc21e9ff8e81cbf1d5044f1ed4dd11ad8c6416959f285be8c7d7f5cc5fc1f0a2906401b814b9b5f4fddbd44
-EBUILD heat-7.0.6.ebuild 5735 SHA256 014a74d7f5d8b308e8cb2f75ad953d85d3eea7ae17dbaa8267898d802a82a823 SHA512 f0733c8af206a3529e7ac0ac5a2b4cb814fc30eeb3ae12fa467dcc4015540e812d14b7a92d16b80bd054797fd6f9617ac213cbbb936e4d857f5e5f7520f8f873 WHIRLPOOL 74d351a605d5a949d4d6bdee98431852d407b3dfc9de0149ebce1990e91cd0527165d42360c8475fde325a32f302f91793fe4d0e91ce4999d147a82aaffeef3c
 EBUILD heat-8.0.4.ebuild 5644 SHA256 7f86f98db8c106c035b62da96aa43ee9ab19af49bb36d4f002999d8a16eb90f6 SHA512 7cf53cd26567282869ce2aaf1b045cd30c16af63fe484fd238cae512ce8c8a04018d76d5fd7cb828a690d9d24526cdc5b259e7b3b0a4e786b090c41b290269cb WHIRLPOOL 9b9fc8adda07a3d08b84600ba51afd7599110463564584d2e0fef574113ba1db50c10c0acf638c90773242441ec1e244defc0cb98abbf33fc0a8b8eceb66da5c
 EBUILD heat-9.0.0.ebuild 6435 SHA256 6af699b66af71f9cd386b2784ff5d2f53326dbefa0769680cad695837900b4de SHA512 2d4de5bd02b861ef4e6b306314629bd06c2c883b56e5493e8efda75cf7a62fc5a600002c401115ac34c019325fb858ddc059ae307cf2e7751dfdbd0b4c9d22eb WHIRLPOOL 28f9bce391a7f3d7cfb8ea3ffb86fcace088f8bae779b660a2c1d117514d0e65dfd2081b9377f42500c55809a55ad4638e5edcded737e80aacb8064e690dbdf5
 MISC ChangeLog 1787 SHA256 3deab106bdcbb6a3b66d3c6a12797c9d36e1e77d24534669bf06759f5119981e SHA512 7d7b6abdfafe22c664c324317e6e9caa39f25d9ab8f49325534e414ec776ec7611538df92ac7b1dff370cc31c27f7b04a0c9346edc257bb46a48de9f858acc0a WHIRLPOOL a05b856678fccde635231f43c3275dee8b1f92aad8ff12988b2a03a087d61ac598f70d94e22efa9dc3630c99cd446ae5d84579db48f15043bbe00437d0ab8eef
diff --git a/sys-cluster/heat/files/newton-heat.conf.sample b/sys-cluster/heat/files/newton-heat.conf.sample
deleted file mode 100644
index 433b8ba3e5e8..000000000000
--- a/sys-cluster/heat/files/newton-heat.conf.sample
+++ /dev/null
@@ -1,1225 +0,0 @@
-[DEFAULT]
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-#debug = false
-
-# DEPRECATED: If set to false, the logging level will be set to WARNING instead
-# of the default INFO level. (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#verbose = true
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = <None>
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-#log_date_format = %Y-%m-%d %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = <None>
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = <None>
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = true
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-#
-# From oslo.messaging
-#
-
-# Size of RPC connection pool. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
-#rpc_conn_pool_size = 30
-
-# The pool size limit for connections expiration policy (integer value)
-#conn_pool_min_size = 2
-
-# The time-to-live in sec of idle connections in the pool (integer value)
-#conn_pool_ttl = 1200
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, dummy
-# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_host
-#rpc_zmq_host = localhost
-
-# Seconds to wait before a cast expires (TTL). The default value of -1
-# specifies an infinite linger period. The value of 0 specifies no linger
-# period. Pending messages shall be discarded immediately when the socket is
-# closed. Only supported by impl_zmq. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#rpc_cast_timeout = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-# Deprecated group/name - [DEFAULT]/zmq_target_expire
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/zmq_target_update
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/use_pub_sub
-#use_pub_sub = true
-
-# Use ROUTER remote proxy. (boolean value)
-# Deprecated group/name - [DEFAULT]/use_router_proxy
-#use_router_proxy = true
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = false
-
-# Size of executor thread pool. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
-#executor_thread_pool_size = 64
-
-# Seconds to wait for a response from a call. (integer value)
-#rpc_response_timeout = 60
-
-# A URL representing the messaging driver to use and its full configuration.
-# (string value)
-#transport_url = <None>
-
-# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
-# include amqp and zmq. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rpc_backend = rabbit
-
-# The default exchange under which topics are scoped. May be overridden by an
-# exchange name specified in the transport_url option. (string value)
-#control_exchange = openstack
-
-#
-# From oslo.service.periodic_task
-#
-
-# Some periodic tasks can be run in a separate process. Should we run them
-# here? (boolean value)
-#run_external_periodic_tasks = true
-
-#
-# From oslo.service.service
-#
-
-# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
-# <start>:<end>, where 0 results in listening on a random tcp port number;
-# <port> results in listening on the specified port number (and not enabling
-# backdoor if that port is in use); and <start>:<end> results in listening on
-# the smallest unused port number within the specified range of port numbers.
-# The chosen port is displayed in the service's log file. (string value)
-#backdoor_port = <None>
-
-# Enable eventlet backdoor, using the provided path as a unix socket that can
-# receive connections. This option is mutually exclusive with 'backdoor_port'
-# in that only one should be provided. If both are provided then the existence
-# of this option overrides the usage of that option. (string value)
-#backdoor_socket = <None>
-
-# Enables or disables logging values of all registered options when starting a
-# service (at DEBUG level). (boolean value)
-#log_options = true
-
-# Specify a timeout after which a gracefully shutdown server will exit. Zero
-# value means endless wait. (integer value)
-#graceful_shutdown_timeout = 60
-
-
-[cors]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers =
-
-
-[cors.subdomain]
-
-#
-# From oslo.middleware
-#
-
-# Indicate whether this resource may be shared with the domain received in the
-# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
-# slash. Example: https://horizon.example.com (list value)
-#allowed_origin = <None>
-
-# Indicate that the actual request can include user credentials (boolean value)
-#allow_credentials = true
-
-# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
-# Headers. (list value)
-#expose_headers =
-
-# Maximum cache age of CORS preflight requests. (integer value)
-#max_age = 3600
-
-# Indicate which methods can be used during the actual request. (list value)
-#allow_methods = OPTIONS,GET,HEAD,POST,PUT,DELETE,TRACE,PATCH
-
-# Indicate which header field names may be used during the actual request.
-# (list value)
-#allow_headers =
-
-
-[database]
-
-#
-# From oslo.db
-#
-
-# DEPRECATED: The file name to use with SQLite. (string value)
-# Deprecated group/name - [DEFAULT]/sqlite_db
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Should use config option connection or slave_connection to connect
-# the database.
-#sqlite_db = oslo.sqlite
-
-# If True, SQLite uses synchronous mode. (boolean value)
-# Deprecated group/name - [DEFAULT]/sqlite_synchronous
-#sqlite_synchronous = true
-
-# The back end to use for the database. (string value)
-# Deprecated group/name - [DEFAULT]/db_backend
-#backend = sqlalchemy
-
-# The SQLAlchemy connection string to use to connect to the database. (string
-# value)
-# Deprecated group/name - [DEFAULT]/sql_connection
-# Deprecated group/name - [DATABASE]/sql_connection
-# Deprecated group/name - [sql]/connection
-#connection = <None>
-
-# The SQLAlchemy connection string to use to connect to the slave database.
-# (string value)
-#slave_connection = <None>
-
-# The SQL mode to be used for MySQL sessions. This option, including the
-# default, overrides any server-set SQL mode. To use whatever SQL mode is set
-# by the server configuration, set this to no value. Example: mysql_sql_mode=
-# (string value)
-#mysql_sql_mode = TRADITIONAL
-
-# Timeout before idle SQL connections are reaped. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_idle_timeout
-# Deprecated group/name - [DATABASE]/sql_idle_timeout
-# Deprecated group/name - [sql]/idle_timeout
-#idle_timeout = 3600
-
-# Minimum number of SQL connections to keep open in a pool. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_min_pool_size
-# Deprecated group/name - [DATABASE]/sql_min_pool_size
-#min_pool_size = 1
-
-# Maximum number of SQL connections to keep open in a pool. Setting a value of
-# 0 indicates no limit. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_pool_size
-# Deprecated group/name - [DATABASE]/sql_max_pool_size
-#max_pool_size = 5
-
-# Maximum number of database connection retries during startup. Set to -1 to
-# specify an infinite retry count. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_retries
-# Deprecated group/name - [DATABASE]/sql_max_retries
-#max_retries = 10
-
-# Interval between retries of opening a SQL connection. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_retry_interval
-# Deprecated group/name - [DATABASE]/reconnect_interval
-#retry_interval = 10
-
-# If set, use this value for max_overflow with SQLAlchemy. (integer value)
-# Deprecated group/name - [DEFAULT]/sql_max_overflow
-# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
-#max_overflow = 50
-
-# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
-# value)
-# Minimum value: 0
-# Maximum value: 100
-# Deprecated group/name - [DEFAULT]/sql_connection_debug
-#connection_debug = 0
-
-# Add Python stack traces to SQL as comment strings. (boolean value)
-# Deprecated group/name - [DEFAULT]/sql_connection_trace
-#connection_trace = false
-
-# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
-# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
-#pool_timeout = <None>
-
-# Enable the experimental use of database reconnect on connection lost.
-# (boolean value)
-#use_db_reconnect = false
-
-# Seconds between retries of a database transaction. (integer value)
-#db_retry_interval = 1
-
-# If True, increases the interval between retries of a database operation up to
-# db_max_retry_interval. (boolean value)
-#db_inc_retry_interval = true
-
-# If db_inc_retry_interval is set, the maximum seconds between retries of a
-# database operation. (integer value)
-#db_max_retry_interval = 10
-
-# Maximum retries in case of connection error or deadlock error before error is
-# raised. Set to -1 to specify an infinite retry count. (integer value)
-#db_max_retries = 20
-
-
-[keystone_authtoken]
-
-#
-# From keystonemiddleware.auth_token
-#
-
-# Complete "public" Identity API endpoint. This endpoint should not be an
-# "admin" endpoint, as it should be accessible by all end users.
-# Unauthenticated clients are redirected to this endpoint to authenticate.
-# Although this endpoint should  ideally be unversioned, client support in the
-# wild varies.  If you're using a versioned v2 endpoint here, then this  should
-# *not* be the same endpoint the service user utilizes  for validating tokens,
-# because normal end users may not be  able to reach that endpoint. (string
-# value)
-#auth_uri = <None>
-
-# API version of the admin Identity API endpoint. (string value)
-#auth_version = <None>
-
-# Do not handle authorization requests within the middleware, but delegate the
-# authorization decision to downstream WSGI components. (boolean value)
-#delay_auth_decision = false
-
-# Request timeout value for communicating with Identity API server. (integer
-# value)
-#http_connect_timeout = <None>
-
-# How many times are we trying to reconnect when communicating with Identity
-# API Server. (integer value)
-#http_request_max_retries = 3
-
-# Request environment key where the Swift cache object is stored. When
-# auth_token middleware is deployed with a Swift cache, use this option to have
-# the middleware share a caching backend with swift. Otherwise, use the
-# ``memcached_servers`` option instead. (string value)
-#cache = <None>
-
-# Required if identity server requires client certificate (string value)
-#certfile = <None>
-
-# Required if identity server requires client certificate (string value)
-#keyfile = <None>
-
-# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
-# Defaults to system CAs. (string value)
-#cafile = <None>
-
-# Verify HTTPS connections. (boolean value)
-#insecure = false
-
-# The region in which the identity server can be found. (string value)
-#region_name = <None>
-
-# Directory used to cache files related to PKI tokens. (string value)
-#signing_dir = <None>
-
-# Optionally specify a list of memcached server(s) to use for caching. If left
-# undefined, tokens will instead be cached in-process. (list value)
-# Deprecated group/name - [keystone_authtoken]/memcache_servers
-#memcached_servers = <None>
-
-# In order to prevent excessive effort spent validating tokens, the middleware
-# caches previously-seen tokens for a configurable duration (in seconds). Set
-# to -1 to disable caching completely. (integer value)
-#token_cache_time = 300
-
-# Determines the frequency at which the list of revoked tokens is retrieved
-# from the Identity service (in seconds). A high number of revocation events
-# combined with a low cache duration may significantly reduce performance. Only
-# valid for PKI tokens. (integer value)
-#revocation_cache_time = 10
-
-# (Optional) If defined, indicate whether token data should be authenticated or
-# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
-# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
-# cache. If the value is not one of these options or empty, auth_token will
-# raise an exception on initialization. (string value)
-# Allowed values: None, MAC, ENCRYPT
-#memcache_security_strategy = None
-
-# (Optional, mandatory if memcache_security_strategy is defined) This string is
-# used for key derivation. (string value)
-#memcache_secret_key = <None>
-
-# (Optional) Number of seconds memcached server is considered dead before it is
-# tried again. (integer value)
-#memcache_pool_dead_retry = 300
-
-# (Optional) Maximum total number of open connections to every memcached
-# server. (integer value)
-#memcache_pool_maxsize = 10
-
-# (Optional) Socket timeout in seconds for communicating with a memcached
-# server. (integer value)
-#memcache_pool_socket_timeout = 3
-
-# (Optional) Number of seconds a connection to memcached is held unused in the
-# pool before it is closed. (integer value)
-#memcache_pool_unused_timeout = 60
-
-# (Optional) Number of seconds that an operation will wait to get a memcached
-# client connection from the pool. (integer value)
-#memcache_pool_conn_get_timeout = 10
-
-# (Optional) Use the advanced (eventlet safe) memcached client pool. The
-# advanced pool will only work under python 2.x. (boolean value)
-#memcache_use_advanced_pool = false
-
-# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
-# middleware will not ask for service catalog on token validation and will not
-# set the X-Service-Catalog header. (boolean value)
-#include_service_catalog = true
-
-# Used to control the use and type of token binding. Can be set to: "disabled"
-# to not check token binding. "permissive" (default) to validate binding
-# information if the bind type is of a form known to the server and ignore it
-# if not. "strict" like "permissive" but if the bind type is unknown the token
-# will be rejected. "required" any form of token binding is needed to be
-# allowed. Finally the name of a binding method that must be present in tokens.
-# (string value)
-#enforce_token_bind = permissive
-
-# If true, the revocation list will be checked for cached tokens. This requires
-# that PKI tokens are configured on the identity server. (boolean value)
-#check_revocations_for_cached = false
-
-# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
-# or multiple. The algorithms are those supported by Python standard
-# hashlib.new(). The hashes will be tried in the order given, so put the
-# preferred one first for performance. The result of the first hash will be
-# stored in the cache. This will typically be set to multiple values only while
-# migrating from a less secure algorithm to a more secure one. Once all the old
-# tokens are expired this option should be set to a single value for better
-# performance. (list value)
-#hash_algorithms = md5
-
-# Authentication type to load (string value)
-# Deprecated group/name - [keystone_authtoken]/auth_plugin
-#auth_type = <None>
-
-# Config Section from which to load plugin specific options (string value)
-#auth_section = <None>
-
-
-[matchmaker_redis]
-
-#
-# From oslo.messaging
-#
-
-# DEPRECATED: Host to locate redis. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#host = 127.0.0.1
-
-# DEPRECATED: Use this port to connect to redis host. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#port = 6379
-
-# DEPRECATED: Password for Redis server (optional). (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#password =
-
-# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode) e.g.
-# [host:port, host1:port ... ] (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#sentinel_hosts =
-
-# Redis replica set name. (string value)
-#sentinel_group_name = oslo-messaging-zeromq
-
-# Time in ms to wait between connection attempts. (integer value)
-#wait_timeout = 2000
-
-# Time in ms to wait before the transaction is killed. (integer value)
-#check_timeout = 20000
-
-# Timeout in ms on blocking socket operations (integer value)
-#socket_timeout = 10000
-
-
-[oslo_messaging_amqp]
-
-#
-# From oslo.messaging
-#
-
-# Name for the AMQP container. must be globally unique. Defaults to a generated
-# UUID (string value)
-# Deprecated group/name - [amqp1]/container_name
-#container_name = <None>
-
-# Timeout for inactive connections (in seconds) (integer value)
-# Deprecated group/name - [amqp1]/idle_timeout
-#idle_timeout = 0
-
-# Debug: dump AMQP frames to stdout (boolean value)
-# Deprecated group/name - [amqp1]/trace
-#trace = false
-
-# CA certificate PEM file to verify server certificate (string value)
-# Deprecated group/name - [amqp1]/ssl_ca_file
-#ssl_ca_file =
-
-# Identifying certificate PEM file to present to clients (string value)
-# Deprecated group/name - [amqp1]/ssl_cert_file
-#ssl_cert_file =
-
-# Private key PEM file used to sign cert_file certificate (string value)
-# Deprecated group/name - [amqp1]/ssl_key_file
-#ssl_key_file =
-
-# Password for decrypting ssl_key_file (if encrypted) (string value)
-# Deprecated group/name - [amqp1]/ssl_key_password
-#ssl_key_password = <None>
-
-# Accept clients using either SSL or plain TCP (boolean value)
-# Deprecated group/name - [amqp1]/allow_insecure_clients
-#allow_insecure_clients = false
-
-# Space separated list of acceptable SASL mechanisms (string value)
-# Deprecated group/name - [amqp1]/sasl_mechanisms
-#sasl_mechanisms =
-
-# Path to directory that contains the SASL configuration (string value)
-# Deprecated group/name - [amqp1]/sasl_config_dir
-#sasl_config_dir =
-
-# Name of configuration file (without .conf suffix) (string value)
-# Deprecated group/name - [amqp1]/sasl_config_name
-#sasl_config_name =
-
-# User name for message broker authentication (string value)
-# Deprecated group/name - [amqp1]/username
-#username =
-
-# Password for message broker authentication (string value)
-# Deprecated group/name - [amqp1]/password
-#password =
-
-# Seconds to pause before attempting to re-connect. (integer value)
-# Minimum value: 1
-#connection_retry_interval = 1
-
-# Increase the connection_retry_interval by this many seconds after each
-# unsuccessful failover attempt. (integer value)
-# Minimum value: 0
-#connection_retry_backoff = 2
-
-# Maximum limit for connection_retry_interval + connection_retry_backoff
-# (integer value)
-# Minimum value: 1
-#connection_retry_interval_max = 30
-
-# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
-# recoverable error. (integer value)
-# Minimum value: 1
-#link_retry_delay = 10
-
-# The deadline for an rpc reply message delivery. Only used when caller does
-# not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_reply_timeout = 30
-
-# The deadline for an rpc cast or call message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_send_timeout = 30
-
-# The deadline for a sent notification message delivery. Only used when caller
-# does not provide a timeout expiry. (integer value)
-# Minimum value: 5
-#default_notify_timeout = 30
-
-# Indicates the addressing mode used by the driver.
-# Permitted values:
-# 'legacy'   - use legacy non-routable addressing
-# 'routable' - use routable addresses
-# 'dynamic'  - use legacy addresses if the message bus does not support routing
-# otherwise use routable addressing (string value)
-#addressing_mode = dynamic
-
-# address prefix used when sending to a specific server (string value)
-# Deprecated group/name - [amqp1]/server_request_prefix
-#server_request_prefix = exclusive
-
-# address prefix used when broadcasting to all servers (string value)
-# Deprecated group/name - [amqp1]/broadcast_prefix
-#broadcast_prefix = broadcast
-
-# address prefix when sending to any server in group (string value)
-# Deprecated group/name - [amqp1]/group_request_prefix
-#group_request_prefix = unicast
-
-# Address prefix for all generated RPC addresses (string value)
-#rpc_address_prefix = openstack.org/om/rpc
-
-# Address prefix for all generated Notification addresses (string value)
-#notify_address_prefix = openstack.org/om/notify
-
-# Appended to the address prefix when sending a fanout message. Used by the
-# message bus to identify fanout messages. (string value)
-#multicast_address = multicast
-
-# Appended to the address prefix when sending to a particular RPC/Notification
-# server. Used by the message bus to identify messages sent to a single
-# destination. (string value)
-#unicast_address = unicast
-
-# Appended to the address prefix when sending to a group of consumers. Used by
-# the message bus to identify messages that should be delivered in a round-
-# robin fashion across consumers. (string value)
-#anycast_address = anycast
-
-# Exchange name used in notification addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_notification_exchange if set
-# else control_exchange if set
-# else 'notify' (string value)
-#default_notification_exchange = <None>
-
-# Exchange name used in RPC addresses.
-# Exchange name resolution precedence:
-# Target.exchange if set
-# else default_rpc_exchange if set
-# else control_exchange if set
-# else 'rpc' (string value)
-#default_rpc_exchange = <None>
-
-# Window size for incoming RPC Reply messages. (integer value)
-# Minimum value: 1
-#reply_link_credit = 200
-
-# Window size for incoming RPC Request messages (integer value)
-# Minimum value: 1
-#rpc_server_credit = 100
-
-# Window size for incoming Notification messages (integer value)
-# Minimum value: 1
-#notify_server_credit = 100
-
-
-[oslo_messaging_notifications]
-
-#
-# From oslo.messaging
-#
-
-# The Drivers(s) to handle sending notifications. Possible values are
-# messaging, messagingv2, routing, log, test, noop (multi valued)
-# Deprecated group/name - [DEFAULT]/notification_driver
-#driver =
-
-# A URL representing the messaging driver to use for notifications. If not set,
-# we fall back to the same configuration used for RPC. (string value)
-# Deprecated group/name - [DEFAULT]/notification_transport_url
-#transport_url = <None>
-
-# AMQP topic used for OpenStack notifications. (list value)
-# Deprecated group/name - [rpc_notifier2]/topics
-# Deprecated group/name - [DEFAULT]/notification_topics
-#topics = notifications
-
-
-[oslo_messaging_rabbit]
-
-#
-# From oslo.messaging
-#
-
-# Use durable queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_durable_queues
-# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
-#amqp_durable_queues = false
-
-# Auto-delete queues in AMQP. (boolean value)
-# Deprecated group/name - [DEFAULT]/amqp_auto_delete
-#amqp_auto_delete = false
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-# Deprecated group/name - [DEFAULT]/kombu_ssl_version
-#kombu_ssl_version =
-
-# SSL key file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
-#kombu_ssl_keyfile =
-
-# SSL cert file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
-#kombu_ssl_certfile =
-
-# SSL certification authority file (valid only if SSL enabled). (string value)
-# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
-#kombu_ssl_ca_certs =
-
-# How long to wait before reconnecting in response to an AMQP consumer cancel
-# notification. (floating point value)
-# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
-#kombu_reconnect_delay = 1.0
-
-# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
-# be used. This option may not be available in future versions. (string value)
-#kombu_compression = <None>
-
-# How long to wait a missing client before abandoning to send it its replies.
-# This value should not be longer than rpc_response_timeout. (integer value)
-# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
-#kombu_missing_consumer_retry_timeout = 60
-
-# Determines how the next RabbitMQ node is chosen in case the one we are
-# currently connected to becomes unavailable. Takes effect only if more than
-# one RabbitMQ node is provided in config. (string value)
-# Allowed values: round-robin, shuffle
-#kombu_failover_strategy = round-robin
-
-# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
-# value)
-# Deprecated group/name - [DEFAULT]/rabbit_host
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_host = localhost
-
-# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
-# value)
-# Minimum value: 0
-# Maximum value: 65535
-# Deprecated group/name - [DEFAULT]/rabbit_port
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_port = 5672
-
-# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
-# Deprecated group/name - [DEFAULT]/rabbit_hosts
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_hosts = $rabbit_host:$rabbit_port
-
-# Connect over SSL for RabbitMQ. (boolean value)
-# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
-#rabbit_use_ssl = false
-
-# DEPRECATED: The RabbitMQ userid. (string value)
-# Deprecated group/name - [DEFAULT]/rabbit_userid
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_userid = guest
-
-# DEPRECATED: The RabbitMQ password. (string value)
-# Deprecated group/name - [DEFAULT]/rabbit_password
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_password = guest
-
-# The RabbitMQ login method. (string value)
-# Deprecated group/name - [DEFAULT]/rabbit_login_method
-#rabbit_login_method = AMQPLAIN
-
-# DEPRECATED: The RabbitMQ virtual host. (string value)
-# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Replaced by [DEFAULT]/transport_url
-#rabbit_virtual_host = /
-
-# How frequently to retry connecting with RabbitMQ. (integer value)
-#rabbit_retry_interval = 1
-
-# How long to backoff for between retries when connecting to RabbitMQ. (integer
-# value)
-# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
-#rabbit_retry_backoff = 2
-
-# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
-# (integer value)
-#rabbit_interval_max = 30
-
-# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
-# (infinite retry count). (integer value)
-# Deprecated group/name - [DEFAULT]/rabbit_max_retries
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#rabbit_max_retries = 0
-
-# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
-# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
-# is no longer controlled by the x-ha-policy argument when declaring a queue.
-# If you just want to make sure that all queues (except  those with auto-
-# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
-# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
-# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
-#rabbit_ha_queues = false
-
-# Positive integer representing duration in seconds for queue TTL (x-expires).
-# Queues which are unused for the duration of the TTL are automatically
-# deleted. The parameter affects only reply and fanout queues. (integer value)
-# Minimum value: 1
-#rabbit_transient_queues_ttl = 1800
-
-# Specifies the number of messages to prefetch. Setting to zero allows
-# unlimited messages. (integer value)
-#rabbit_qos_prefetch_count = 0
-
-# Number of seconds after which the Rabbit broker is considered down if
-# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
-# value)
-#heartbeat_timeout_threshold = 60
-
-# How often times during the heartbeat_timeout_threshold we check the
-# heartbeat. (integer value)
-#heartbeat_rate = 2
-
-# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
-# Deprecated group/name - [DEFAULT]/fake_rabbit
-#fake_rabbit = false
-
-# Maximum number of channels to allow (integer value)
-#channel_max = <None>
-
-# The maximum byte size for an AMQP frame (integer value)
-#frame_max = <None>
-
-# How often to send heartbeats for consumer's connections (integer value)
-#heartbeat_interval = 3
-
-# Enable SSL (boolean value)
-#ssl = <None>
-
-# Arguments passed to ssl.wrap_socket (dict value)
-#ssl_options = <None>
-
-# Set socket timeout in seconds for connection's socket (floating point value)
-#socket_timeout = 0.25
-
-# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
-# value)
-#tcp_user_timeout = 0.25
-
-# Set delay for reconnection to some host which has connection error (floating
-# point value)
-#host_connection_reconnect_delay = 0.25
-
-# Connection factory implementation (string value)
-# Allowed values: new, single, read_write
-#connection_factory = single
-
-# Maximum number of connections to keep queued. (integer value)
-#pool_max_size = 30
-
-# Maximum number of connections to create above `pool_max_size`. (integer
-# value)
-#pool_max_overflow = 0
-
-# Default number of seconds to wait for a connections to available (integer
-# value)
-#pool_timeout = 30
-
-# Lifetime of a connection (since creation) in seconds or None for no
-# recycling. Expired connections are closed on acquire. (integer value)
-#pool_recycle = 600
-
-# Threshold at which inactive (since release) connections are considered stale
-# in seconds or None for no staleness. Stale connections are closed on acquire.
-# (integer value)
-#pool_stale = 60
-
-# Persist notification messages. (boolean value)
-#notification_persistence = false
-
-# Exchange name for sending notifications (string value)
-#default_notification_exchange = ${control_exchange}_notification
-
-# Max number of not acknowledged message which RabbitMQ can send to
-# notification listener. (integer value)
-#notification_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# notification, -1 means infinite retry. (integer value)
-#default_notification_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# notification message (floating point value)
-#notification_retry_delay = 0.25
-
-# Time to live for rpc queues without consumers in seconds. (integer value)
-#rpc_queue_expiration = 60
-
-# Exchange name for sending RPC messages (string value)
-#default_rpc_exchange = ${control_exchange}_rpc
-
-# Exchange name for receiving RPC replies (string value)
-#rpc_reply_exchange = ${control_exchange}_rpc_reply
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc
-# listener. (integer value)
-#rpc_listener_prefetch_count = 100
-
-# Max number of not acknowledged message which RabbitMQ can send to rpc reply
-# listener. (integer value)
-#rpc_reply_listener_prefetch_count = 100
-
-# Reconnecting retry count in case of connectivity problem during sending
-# reply. -1 means infinite retry during rpc_timeout (integer value)
-#rpc_reply_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending
-# reply. (floating point value)
-#rpc_reply_retry_delay = 0.25
-
-# Reconnecting retry count in case of connectivity problem during sending RPC
-# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
-# request could be processed more then one time (integer value)
-#default_rpc_retry_attempts = -1
-
-# Reconnecting retry delay in case of connectivity problem during sending RPC
-# message (floating point value)
-#rpc_retry_delay = 0.25
-
-
-[oslo_messaging_zmq]
-
-#
-# From oslo.messaging
-#
-
-# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
-# The "host" option should point or resolve to this address. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
-#rpc_zmq_bind_address = *
-
-# MatchMaker driver. (string value)
-# Allowed values: redis, dummy
-# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
-#rpc_zmq_matchmaker = redis
-
-# Number of ZeroMQ contexts, defaults to 1. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
-#rpc_zmq_contexts = 1
-
-# Maximum number of ingress messages to locally buffer per topic. Default is
-# unlimited. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
-#rpc_zmq_topic_backlog = <None>
-
-# Directory for holding IPC sockets. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
-#rpc_zmq_ipc_dir = /var/run/openstack
-
-# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
-# "host" option, if running Nova. (string value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_host
-#rpc_zmq_host = localhost
-
-# Seconds to wait before a cast expires (TTL). The default value of -1
-# specifies an infinite linger period. The value of 0 specifies no linger
-# period. Pending messages shall be discarded immediately when the socket is
-# closed. Only supported by impl_zmq. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
-#rpc_cast_timeout = -1
-
-# The default number of seconds that poll should wait. Poll raises timeout
-# exception when timeout expired. (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
-#rpc_poll_timeout = 1
-
-# Expiration timeout in seconds of a name service record about existing target
-# ( < 0 means no timeout). (integer value)
-# Deprecated group/name - [DEFAULT]/zmq_target_expire
-#zmq_target_expire = 300
-
-# Update period in seconds of a name service record about existing target.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/zmq_target_update
-#zmq_target_update = 180
-
-# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
-# value)
-# Deprecated group/name - [DEFAULT]/use_pub_sub
-#use_pub_sub = true
-
-# Use ROUTER remote proxy. (boolean value)
-# Deprecated group/name - [DEFAULT]/use_router_proxy
-#use_router_proxy = true
-
-# Minimal port number for random ports range. (port value)
-# Minimum value: 0
-# Maximum value: 65535
-# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
-#rpc_zmq_min_port = 49153
-
-# Maximal port number for random ports range. (integer value)
-# Minimum value: 1
-# Maximum value: 65536
-# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
-#rpc_zmq_max_port = 65536
-
-# Number of retries to find free port number before fail with ZMQBindError.
-# (integer value)
-# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
-#rpc_zmq_bind_port_retries = 100
-
-# Default serialization mechanism for serializing/deserializing
-# outgoing/incoming messages (string value)
-# Allowed values: json, msgpack
-# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
-#rpc_zmq_serialization = json
-
-# This option configures round-robin mode in zmq socket. True means not keeping
-# a queue when server side disconnects. False means to keep queue and messages
-# even if server is disconnected, when the server appears we send all
-# accumulated messages to it. (boolean value)
-#zmq_immediate = false
-
-
-[oslo_middleware]
-
-#
-# From oslo.middleware
-#
-
-# The maximum body size for each  request, in bytes. (integer value)
-# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
-# Deprecated group/name - [DEFAULT]/max_request_body_size
-#max_request_body_size = 114688
-
-# DEPRECATED: The HTTP Header that will be used to determine what the original
-# request protocol scheme was, even if it was hidden by a SSL termination
-# proxy. (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#secure_proxy_ssl_header = X-Forwarded-Proto
-
-# Whether the application is behind a proxy or not. This determines if the
-# middleware should parse the headers or not. (boolean value)
-#enable_proxy_headers_parsing = false
-
-
-[oslo_policy]
-
-#
-# From oslo.policy
-#
-
-# The JSON file that defines policies. (string value)
-# Deprecated group/name - [DEFAULT]/policy_file
-#policy_file = policy.json
-
-# Default rule. Enforced when a requested rule is not found. (string value)
-# Deprecated group/name - [DEFAULT]/policy_default_rule
-#policy_default_rule = default
-
-# Directories where policy configuration files are stored. They can be relative
-# to any directory in the search path defined by the config_dir option, or
-# absolute paths. The file defined by policy_file must exist for these
-# directories to be searched.  Missing or empty directories are ignored. (multi
-# valued)
-# Deprecated group/name - [DEFAULT]/policy_dirs
-#policy_dirs = policy.d
-
-
-[ssl]
-
-#
-# From oslo.service.sslutils
-#
-
-# CA certificate file to use to verify connecting clients. (string value)
-# Deprecated group/name - [DEFAULT]/ssl_ca_file
-#ca_file = <None>
-
-# Certificate file to use when starting the server securely. (string value)
-# Deprecated group/name - [DEFAULT]/ssl_cert_file
-#cert_file = <None>
-
-# Private key file to use when starting the server securely. (string value)
-# Deprecated group/name - [DEFAULT]/ssl_key_file
-#key_file = <None>
-
-# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
-# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
-# distributions. (string value)
-#version = <None>
-
-# Sets the list of available ciphers. value should be a string in the OpenSSL
-# cipher list format. (string value)
-#ciphers = <None>
diff --git a/sys-cluster/heat/heat-2016.2.9999.ebuild b/sys-cluster/heat/heat-2016.2.9999.ebuild
deleted file mode 100644
index a0bdfb7e5d38..000000000000
--- a/sys-cluster/heat/heat-2016.2.9999.ebuild
+++ /dev/null
@@ -1,152 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-PYTHON_COMPAT=( python2_7 python3_{4,5} )
-
-inherit distutils-r1 eutils git-r3 linux-info user
-
-DESCRIPTION="A CloudFormation-compatible openstack-native cloud orchistration engine."
-HOMEPAGE="https://launchpad.net/heat"
-EGIT_REPO_URI="https://github.com/openstack/heat.git"
-EGIT_BRANCH="stable/newton"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS=""
-IUSE="+mysql +memcached postgres sqlite"
-REQUIRED_USE="|| ( mysql postgres sqlite )"
-
-CDEPEND=">=dev-python/pbr-1.6[${PYTHON_USEDEP}]"
-DEPEND="dev-python/setuptools[${PYTHON_USEDEP}]
-	${CDEPEND}
-	app-admin/sudo"
-
-RDEPEND="
-	${CDEPEND}
-	>=dev-python/Babel-2.3.4[${PYTHON_USEDEP}]
-	>=dev-python/croniter-0.3.4[${PYTHON_USEDEP}]
-	>=dev-python/cryptography-1.0.0[${PYTHON_USEDEP}]
-	!~dev-python/cryptography-1.3.0[${PYTHON_USEDEP}]
-	>=dev-python/debtcollector-1.2.0[${PYTHON_USEDEP}]
-	>=dev-python/eventlet-0.18.4[${PYTHON_USEDEP}]
-	>=dev-python/greenlet-0.3.2[${PYTHON_USEDEP}]
-	>=dev-python/keystoneauth-2.10.0[${PYTHON_USEDEP}]
-	>=dev-python/keystonemiddleware-4.0.0[${PYTHON_USEDEP}]
-	!~dev-python/keystonemiddleware-4.1.0[${PYTHON_USEDEP}]
-	!~dev-python/keystonemiddleware-4.5.0[${PYTHON_USEDEP}]
-	>=dev-python/lxml-2.3[${PYTHON_USEDEP}]
-	>=dev-python/netaddr-0.7.13[${PYTHON_USEDEP}]
-	!~dev-python/netaddr-0.7.16[${PYTHON_USEDEP}]
-	>=dev-python/oslo-cache-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-config-3.14.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-concurrency-3.8.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-context-2.9.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.13.1[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.13.2[${PYTHON_USEDEP}]
-	>=dev-python/oslo-i18n-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-log-1.14.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-messaging-5.2.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-middleware-3.0.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-policy-1.9.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-reports-0.6.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-serialization-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-service-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-utils-3.16.0[${PYTHON_USEDEP}]
-	>=dev-python/osprofiler-1.4.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-versionedobjects-1.13.0[${PYTHON_USEDEP}]
-	>=dev-python/pastedeploy-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/pycrypto-2.6[${PYTHON_USEDEP}]
-	>=dev-python/aodhclient-0.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-barbicanclient-4.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-ceilometerclient-2.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-cinderclient-1.6.0[${PYTHON_USEDEP}]
-	!~dev-python/python-cinderclient-1.7.0[${PYTHON_USEDEP}]
-	!~dev-python/python-cinderclient-1.7.1[${PYTHON_USEDEP}]
-	>=dev-python/python-designateclient-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-glanceclient-2.3.0[${PYTHON_USEDEP}]
-	!~dev-python/python-glanceclient-2.4.0[${PYTHON_USEDEP}]
-	>=dev-python/python-heatclient-1.4.0[${PYTHON_USEDEP}]
-	>=dev-python/python-keystoneclient-2.0.0[${PYTHON_USEDEP}]
-	!~dev-python/python-keystoneclient-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-magnumclient-2.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-manilaclient-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/python-mistralclient-2.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-monascaclient-1.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-neutronclient-5.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-novaclient-2.29.0[${PYTHON_USEDEP}]
-	!~dev-python/python-novaclient-2.33.0[${PYTHON_USEDEP}]
-	>=dev-python/python-openstackclient-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-senlinclient-0.3.0[${PYTHON_USEDEP}]
-	>=dev-python/python-swiftclient-2.2.0[${PYTHON_USEDEP}]
-	>=dev-python/python-troveclient-2.2.0[${PYTHON_USEDEP}]
-	>=dev-python/python-zaqarclient-1.0.0[${PYTHON_USEDEP}]
-	>=dev-python/pytz-2013.6[${PYTHON_USEDEP}]
-	>=dev-python/pyyaml-3.1.0[${PYTHON_USEDEP}]
-	>=dev-python/requests-2.10.0[${PYTHON_USEDEP}]
-	>=dev-python/retrying-1.2.3[${PYTHON_USEDEP}]
-	!~dev-python/retrying-1.3.0[${PYTHON_USEDEP}]
-	>=dev-python/routes-1.12.3[${PYTHON_USEDEP}]
-	!~dev-python/routes-2.0[${PYTHON_USEDEP}]
-	!~dev-python/routes-2.1[$(python_gen_usedep 'python2_7')]
-	!~dev-python/routes-2.3[${PYTHON_USEDEP}]
-	>=dev-python/six-1.9.0[${PYTHON_USEDEP}]
-	sqlite? (
-		>=dev-python/sqlalchemy-1.0.10[sqlite,${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[sqlite,${PYTHON_USEDEP}]
-	)
-	mysql? (
-		>=dev-python/pymysql-0.6.2[${PYTHON_USEDEP}]
-		!~dev-python/pymysql-0.7.7[${PYTHON_USEDEP}]
-		>=dev-python/sqlalchemy-1.0.10[${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[${PYTHON_USEDEP}]
-	)
-	postgres? (
-		>=dev-python/psycopg-2.5.0
-		>=dev-python/sqlalchemy-1.0.10[${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[${PYTHON_USEDEP}]
-	)
-	>=dev-python/sqlalchemy-migrate-0.9.6[${PYTHON_USEDEP}]
-	>=dev-python/stevedore-1.16.0[${PYTHON_USEDEP}]
-
-	>=dev-python/webob-1.2.3-r1[${PYTHON_USEDEP}]
-	>=dev-python/yaql-1.1.0[${PYTHON_USEDEP}]"
-
-PATCHES=(
-)
-
-pkg_setup() {
-	enewgroup heat
-	enewuser heat -1 -1 /var/lib/heat heat
-}
-
-python_prepare_all() {
-	sed -i '/^hacking/d' test-requirements.txt || die
-	distutils-r1_python_prepare_all
-}
-
-python_install_all() {
-	distutils-r1_python_install_all
-	diropts -m0750 -o heat -g heat
-	keepdir /etc/heat
-	dodir /etc/heat/environment.d
-	dodir /etc/heat/templates
-
-	for svc in api api-cfn engine; do
-		newinitd "${FILESDIR}/heat.initd" heat-${svc}
-	done
-
-	insinto /etc/heat
-	insopts -m0640 -o heat -g heat
-	newins "${FILESDIR}/newton-heat.conf.sample" "heat.conf.sample"
-	doins "etc/heat/api-paste.ini"
-	doins "etc/heat/policy.json"
-	insinto /etc/heat/templates
-	doins "etc/heat/templates/"*
-	insinto /etc/heat/environment.d
-	doins "etc/heat/environment.d/default.yaml"
-
-	dodir /var/log/heat
-	fowners heat:heat /var/log/heat
-}
diff --git a/sys-cluster/heat/heat-7.0.6.ebuild b/sys-cluster/heat/heat-7.0.6.ebuild
deleted file mode 100644
index df7dda0453be..000000000000
--- a/sys-cluster/heat/heat-7.0.6.ebuild
+++ /dev/null
@@ -1,151 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-PYTHON_COMPAT=( python2_7 python3_4 )
-
-inherit distutils-r1 eutils user
-
-DESCRIPTION="A CloudFormation-compatible openstack-native cloud orchistration engine."
-HOMEPAGE="https://launchpad.net/heat"
-SRC_URI="https://tarballs.openstack.org/${PN}/${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="amd64 ~arm64 x86"
-IUSE="+mysql +memcached postgres sqlite"
-REQUIRED_USE="|| ( mysql postgres sqlite )"
-
-CDEPEND=">=dev-python/pbr-1.6[${PYTHON_USEDEP}]"
-DEPEND="dev-python/setuptools[${PYTHON_USEDEP}]
-	${CDEPEND}
-	app-admin/sudo"
-
-RDEPEND="
-	${CDEPEND}
-	>=dev-python/Babel-2.3.4[${PYTHON_USEDEP}]
-	>=dev-python/croniter-0.3.4[${PYTHON_USEDEP}]
-	>=dev-python/cryptography-1.0.0[${PYTHON_USEDEP}]
-	!~dev-python/cryptography-1.3.0[${PYTHON_USEDEP}]
-	>=dev-python/debtcollector-1.2.0[${PYTHON_USEDEP}]
-	>=dev-python/eventlet-0.18.4[${PYTHON_USEDEP}]
-	>=dev-python/greenlet-0.3.2[${PYTHON_USEDEP}]
-	>=dev-python/keystoneauth-2.10.0[${PYTHON_USEDEP}]
-	>=dev-python/keystonemiddleware-4.0.0[${PYTHON_USEDEP}]
-	!~dev-python/keystonemiddleware-4.1.0[${PYTHON_USEDEP}]
-	!~dev-python/keystonemiddleware-4.5.0[${PYTHON_USEDEP}]
-	>=dev-python/lxml-2.3[${PYTHON_USEDEP}]
-	>=dev-python/netaddr-0.7.13[${PYTHON_USEDEP}]
-	!~dev-python/netaddr-0.7.16[${PYTHON_USEDEP}]
-	>=dev-python/oslo-cache-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-config-3.14.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-concurrency-3.8.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-context-2.9.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.13.1[${PYTHON_USEDEP}]
-	>=dev-python/oslo-db-4.13.2[${PYTHON_USEDEP}]
-	>=dev-python/oslo-i18n-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-log-1.14.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-messaging-5.2.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-middleware-3.0.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-policy-1.9.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-reports-0.6.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-serialization-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-service-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-utils-3.16.0[${PYTHON_USEDEP}]
-	>=dev-python/osprofiler-1.4.0[${PYTHON_USEDEP}]
-	>=dev-python/oslo-versionedobjects-1.13.0[${PYTHON_USEDEP}]
-	>=dev-python/pastedeploy-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/pycrypto-2.6[${PYTHON_USEDEP}]
-	>=dev-python/aodhclient-0.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-barbicanclient-4.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-ceilometerclient-2.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-cinderclient-1.6.0[${PYTHON_USEDEP}]
-	!~dev-python/python-cinderclient-1.7.0[${PYTHON_USEDEP}]
-	!~dev-python/python-cinderclient-1.7.1[${PYTHON_USEDEP}]
-	>=dev-python/python-designateclient-1.5.0[${PYTHON_USEDEP}]
-	>=dev-python/python-glanceclient-2.3.0[${PYTHON_USEDEP}]
-	!~dev-python/python-glanceclient-2.4.0[${PYTHON_USEDEP}]
-	>=dev-python/python-heatclient-1.4.0[${PYTHON_USEDEP}]
-	>=dev-python/python-keystoneclient-2.0.0[${PYTHON_USEDEP}]
-	!~dev-python/python-keystoneclient-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-magnumclient-2.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-manilaclient-1.10.0[${PYTHON_USEDEP}]
-	>=dev-python/python-mistralclient-2.0.0[${PYTHON_USEDEP}]
-	>=dev-python/python-monascaclient-1.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-neutronclient-5.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-novaclient-2.29.0[${PYTHON_USEDEP}]
-	!~dev-python/python-novaclient-2.33.0[${PYTHON_USEDEP}]
-	>=dev-python/python-openstackclient-2.1.0[${PYTHON_USEDEP}]
-	>=dev-python/python-senlinclient-0.3.0[${PYTHON_USEDEP}]
-	>=dev-python/python-swiftclient-2.2.0[${PYTHON_USEDEP}]
-	>=dev-python/python-troveclient-2.2.0[${PYTHON_USEDEP}]
-	>=dev-python/python-zaqarclient-1.0.0[${PYTHON_USEDEP}]
-	>=dev-python/pytz-2013.6[${PYTHON_USEDEP}]
-	>=dev-python/pyyaml-3.1.0[${PYTHON_USEDEP}]
-	>=dev-python/requests-2.10.0[${PYTHON_USEDEP}]
-	>=dev-python/retrying-1.2.3[${PYTHON_USEDEP}]
-	!~dev-python/retrying-1.3.0[${PYTHON_USEDEP}]
-	>=dev-python/routes-1.12.3[${PYTHON_USEDEP}]
-	!~dev-python/routes-2.0[${PYTHON_USEDEP}]
-	!~dev-python/routes-2.1[$(python_gen_usedep 'python2_7')]
-	!~dev-python/routes-2.3[${PYTHON_USEDEP}]
-	>=dev-python/six-1.9.0[${PYTHON_USEDEP}]
-	sqlite? (
-		>=dev-python/sqlalchemy-1.0.10[sqlite,${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[sqlite,${PYTHON_USEDEP}]
-	)
-	mysql? (
-		>=dev-python/pymysql-0.6.2[${PYTHON_USEDEP}]
-		!~dev-python/pymysql-0.7.7[${PYTHON_USEDEP}]
-		>=dev-python/sqlalchemy-1.0.10[${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[${PYTHON_USEDEP}]
-	)
-	postgres? (
-		>=dev-python/psycopg-2.5.0
-		>=dev-python/sqlalchemy-1.0.10[${PYTHON_USEDEP}]
-		<dev-python/sqlalchemy-1.1.0[${PYTHON_USEDEP}]
-	)
-	>=dev-python/sqlalchemy-migrate-0.9.6[${PYTHON_USEDEP}]
-	>=dev-python/stevedore-1.16.0[${PYTHON_USEDEP}]
-
-	>=dev-python/webob-1.2.3-r1[${PYTHON_USEDEP}]
-	>=dev-python/yaql-1.1.0[${PYTHON_USEDEP}]"
-
-PATCHES=(
-)
-
-pkg_setup() {
-	enewgroup heat
-	enewuser heat -1 -1 /var/lib/heat heat
-}
-
-python_prepare_all() {
-	sed -i '/^hacking/d' test-requirements.txt || die
-	distutils-r1_python_prepare_all
-}
-
-python_install() {
-	distutils-r1_python_install
-	diropts -m0750 -o heat -g heat
-	keepdir /etc/heat
-	dodir /etc/heat/environment.d
-	dodir /etc/heat/templates
-
-	for svc in api api-cfn engine; do
-		newinitd "${FILESDIR}/heat.initd" heat-${svc}
-	done
-
-	insinto /etc/heat
-	insopts -m0640 -o heat -g heat
-	newins "${FILESDIR}/newton-heat.conf.sample" "heat.conf.sample"
-	doins "etc/heat/api-paste.ini"
-	doins "etc/heat/policy.json"
-	insinto /etc/heat/templates
-	doins "etc/heat/templates/"*
-	insinto /etc/heat/environment.d
-	doins "etc/heat/environment.d/default.yaml"
-
-	dodir /var/log/heat
-	fowners heat:heat /var/log/heat
-}