gentoo resync : 12.10.2017 (fix rsync script)

5 files changed, 0 insertions, 1728 deletions

diff --git a/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild b/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild
deleted file mode 100644
index 47dcd4945846..000000000000
--- a/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild
+++ /dev/null
@@ -1,344 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20170314"			# Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1"				# Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.9"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
-	>=sys-devel/gcc-4.7.0
-	>=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test"				# If "yes", enable IP22 support		(SGI Indy, Indigo2 R4x00)
-DO_IP27="yes"				# 		   IP27 support		(SGI Origin)
-DO_IP28="test"				# 		   IP28 support		(SGI Indigo2 Impact R10000)
-DO_IP30="yes"				# 		   IP30 support		(SGI Octane)
-DO_IP32="yes"				# 		   IP32 support		(SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22=""				# If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27=""				# 	    DO_IP27 == "no", 			   IP27
-SV_IP28=""				# 	    DO_IP28 == "no", 			   IP28
-SV_IP30=""				# 	    DO_IP30 == "no", 			   IP30
-SV_IP32=""				# 	    DO_IP32 == "no", 			   IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
-	 mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
-	 mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
-	# Get args
-	local m_name="${1}"
-	local m_abbr="${2}"
-	local m_use="${3}"
-	local is_test="${4}"
-
-	# Get stable version, if exists
-	local stable_ver="SV_${m_abbr}"
-	stable_ver="${!stable_ver}"
-
-	# See if this machine needs a USE passed or skip dying
-	local has_use
-	[ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
-	# Print error && (maybe) die
-	echo -e ""
-	if [ "${is_test}" != "test" ]; then
-		eerror "${m_name} Support has been disabled in this ebuild"
-		eerror "revision.  If you wish to merge ${m_name} sources, then"
-		eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
-		[ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
-	else
-		ewarn "${m_name} Support has been marked as needing testing in this"
-		ewarn "ebuild revision.  This usually means that any patches to support"
-		ewarn "${m_name} have been forward ported and maybe even compile-tested,"
-		ewarn "but not yet booted on real hardware, possibly due to a lack of access"
-		ewarn "to such hardware.  If you happen to boot this kernel and have no"
-		ewarn "problems at all, then please inform the maintainer.  Otherwise, if"
-		ewarn "experience a bug, an oops/panic, or some other oddity, then please"
-		ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
-	fi
-
-	return 0
-}
-
-err_only_one_mach_allowed() {
-	echo -e ""
-	eerror "A patchset for a specific machine-type has already been selected."
-	eerror "No other patches for machines-types are permitted.  You will need a"
-	eerror "separate copy of the kernel sources for each different machine-type"
-	eerror "you want to build a kernel for."
-	die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
-	# Symlink /usr/src/linux as appropriate
-	local my_ksrc="${S##*/}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && my_ksrc="${my_ksrc}.${x}"
-	done
-
-	if [ ! -e "${ROOT}usr/src/linux" ]; then
-		rm -f "${ROOT}usr/src/linux"
-		ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
-	fi
-}
-
-pkg_setup() {
-	local arch_is_selected="no"
-	local m_ip m_enable m_name
-
-	# Exclusive machine patchsets
-	# These are not allowed to be mixed together, thus only one of them may be applied
-	# to a tree per merge.
-	for x in									\
-		"ip27 SGI Origin 200/2000"						\
-		"ip28 SGI Indigo2 Impact R10000"					\
-		"ip30 SGI Octane"
-	do
-		set -- ${x}		# Set positional params
-		m_ip="${1}"		# Grab the first param (HW IP for SGI)
-		shift			# Shift the positions
-		m_name="${*}"		# Get the rest (Name)
-
-		if use ${m_ip}; then
-			# Fetch the value indiciating if the machine is enabled or not
-			m_enable="DO_${m_ip/ip/IP}"
-			m_enable="${!m_enable}"
-
-			# Make sure only one of these exclusive machine patches is selected
-			[ "${arch_is_selected}" = "no" ]				\
-				&& arch_is_selected="yes"				\
-				|| err_only_one_mach_allowed
-
-			# Is the machine support disabled or marked as needing testing?
-			[ "${m_enable}" = "test" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
-			[ "${m_enable}" = "no" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
-			# Show relevant information about the machine
-			show_${m_ip}_info
-		fi
-	done
-
-	# All other systems that don't have a USE flag go here
-	# These systems have base-line support included in linux-mips git, so
-	# instead of failing, if disabled, we simply warn the user
-	if [ "${arch_is_selected}" = "no" ]; then
-		[ "${DO_IP22}" = "no" ]							\
-			&& err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip"	\
-			|| show_ip22_info
-		[ "${DO_IP32}" = "no" ]							\
-			&& err_disabled_mach "SGI O2" "IP32" "skip"			\
-			|| show_ip32_info
-
-	fi
-}
-
-show_ip22_info() {
-	echo -e ""
-	einfo "IP22 systems with an R5000 processor should work with this release."
-	einfo "The R4x00 series of processors tend to be rather flaky, especially the"
-	einfo "R4600.  If you have to run an R4x00 processor, then try to use an R4400."
-	einfo ""
-	einfo "Some Notes:"
-	einfo "\t- Supported graphics card right now is Newport (XL)."
-	einfo "\t- A driver for Extreme (XZ) does not exist at present."
-	echo -e ""
-}
-
-show_ip27_info() {
-	echo -e ""
-	ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
-	ewarn "in move_freepages() in mm/page_alloc.c.  The exact trigger cause is"
-	ewarn "unknown at this time.  Please report any oops messages from this"
-	ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
-	echo -e ""
-}
-
-show_ip28_info() {
-	echo -e ""
-	einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel.  However,"
-	einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
-	einfo "nothing is guaranteed to work correctly.  Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
-	einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
-	einfo "feedback that can be used to trace down the crash."
-	echo -e ""
-}
-
-show_ip30_info() {
-	echo -e ""
-	eerror "Things that DON'T work:"
-	eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
-	eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
-	eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
-	eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
-	eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
-	eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
-	eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
-	echo -e ""
-	ewarn "Things that might work, but have problems, or are unknown:"
-	ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
-	ewarn "\t\040\040intermittent issues.  Additionally, CONFIG_HUGETLBFS must also be"
-	ewarn "\t\040\040selected for hugepages to work.  If use of this feature continues"
-	ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
-	ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
-	ewarn "\t\040\040after powering it down for at least 30 seconds."
-	ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
-	ewarn "\t\040\040the 16550A chip on the IOC3 directly.  It does not use interrupts,"
-	ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
-	ewarn "\t\040\040intensive.  The baud rate is limited to no more than 38.4kbps on"
-	ewarn "\t\040\040this driver.  Patches for getting the Altix IOC3 serial driver to"
-	ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
-	ewarn "\t- UHCI Cards are known to have issues, but should still function."
-	ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
-	ewarn "\t\040\040adapters."
-	ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
-	ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
-	ewarn "\t\040\040UART driver.  The NIC part number is also not read correctly"
-	ewarn "\t\040\040from the four Number-In-a-Cans.  Additional testing would be"
-	ewarn "\t\040\040appreciated and patches welcome."
-	ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
-	ewarn "\t\040\040and are not guaranteed to work.  This applies to various digital"
-	ewarn "\t\040\040video conversion boards as well."
-	echo -e ""
-	einfo "Things that DO work:"
-	einfo "\t- SMP works again, celebrate!"
-	einfo "\t- Impact (MGRAS) console only."
-	einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
-	einfo "\t- PCI Card Cages should work for many devices, except certain types like"
-	einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
-	einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse.  Please"
-	einfo "\t\040\040report any problems with these devices."
-	echo -e ""
-}
-
-show_ip32_info() {
-	echo -e ""
-	einfo "IP32 systems function well, however there are some notes:"
-	einfo "\t- A sound driver now exists for IP32.  Celebrate!"
-	einfo "\t- Framebuffer console is limited to 4MB.  Anything greater"
-	einfo "\t\040\040specified when building the kernel will likely oops"
-	einfo "\t\040\040or panic the kernel."
-	einfo "\t- X support is limited to the generic fbdev driver.  No X"
-	einfo "\t\040\040gbefb driver exists for O2 yet.  Feel free to submit"
-	einfo "\t\040\040patches!"
-	echo -e ""
-
-	einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
-	einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
-	einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
-	# Unpack the kernel sources, update to the latest rev (if needed),
-	# and apply the latest patch from linux-mips git.
-	kernel-2_src_unpack
-
-	# Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
-	echo -e ""
-	cd "${WORKDIR}"
-	unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-	# Create a new folder called  'patch-symlinks' and create symlinks to
-	# all mips-patches in there.  If we want to exclude a patch, we'll
-	# just delete the symlink instead of the actual patch.
-	local psym="patch-symlinks"
-	mkdir "${psym}"
-	cd "${psym}"
-	for x in ../mips-patches-${BASE_KV}/*.patch; do
-		ln -s "${x}" "${x##../mips-patches-*/}"
-	done
-
-	# With symlinks created, setup the variables referencing external
-	# machine patches and if a machine USE flag is enabled, then unset
-	# its corresponding variable.
-	# See 0000_README for the patch numbers and their meanings.
-	local p_generic="51*"
-	local p_ip27="52*" p_ip28="53*" p_ip30="54*"
-	local p_xp="80*"
-	use ip27 && unset p_generic p_ip27
-	use ip28 && unset p_ip28
-	use ip30 && unset p_generic p_ip30
-	use experimental && unset p_xp
-
-	# Remove symlinks for any patches that we don't want applied.  We
-	# do this by looping through all the above variables, and deleting
-	# matching symlinks that point to the corresponding patches.
-	# The remaining symlinks will be applied to the kernel source.
-	#
-	# $P_EXCLUDE is a new var that can be set in an ebuild to exclude
-	# specific patches by wildcarding the patch number.
-	local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
-	for x in $patchlist;
-		do rm -f "./${x}"
-	done
-
-	# Rename the source tree to match the linux-mips git checkout date and
-	# machine type.
-	local fkv="${F_KV%-*}"
-	local v="${fkv}-${GITDATE}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && v="${v}.${x}" && break
-	done
-	mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
-	S="${WORKDIR}/linux-${v}"
-
-	# Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
-	EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
-	unpack_set_extraversion
-}
-
-src_prepare() {
-	local psym="patch-symlinks"
-
-	# Now go into the kernel source and patch it.
-	cd "${S}"
-	epatch -p1 "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.12.4.ebuild b/sys-kernel/mips-sources/mips-sources-4.12.4.ebuild
deleted file mode 100644
index 109a0726cf3f..000000000000
--- a/sys-kernel/mips-sources/mips-sources-4.12.4.ebuild
+++ /dev/null
@@ -1,344 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20170703"			# Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1"				# Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.11"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
-	>=sys-devel/gcc-4.7.0
-	>=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test"				# If "yes", enable IP22 support		(SGI Indy, Indigo2 R4x00)
-DO_IP27="yes"				# 		   IP27 support		(SGI Origin)
-DO_IP28="test"				# 		   IP28 support		(SGI Indigo2 Impact R10000)
-DO_IP30="yes"				# 		   IP30 support		(SGI Octane)
-DO_IP32="yes"				# 		   IP32 support		(SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22=""				# If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27=""				# 	    DO_IP27 == "no", 			   IP27
-SV_IP28=""				# 	    DO_IP28 == "no", 			   IP28
-SV_IP30=""				# 	    DO_IP30 == "no", 			   IP30
-SV_IP32=""				# 	    DO_IP32 == "no", 			   IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
-	 mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
-	 mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
-	# Get args
-	local m_name="${1}"
-	local m_abbr="${2}"
-	local m_use="${3}"
-	local is_test="${4}"
-
-	# Get stable version, if exists
-	local stable_ver="SV_${m_abbr}"
-	stable_ver="${!stable_ver}"
-
-	# See if this machine needs a USE passed or skip dying
-	local has_use
-	[ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
-	# Print error && (maybe) die
-	echo -e ""
-	if [ "${is_test}" != "test" ]; then
-		eerror "${m_name} Support has been disabled in this ebuild"
-		eerror "revision.  If you wish to merge ${m_name} sources, then"
-		eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
-		[ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
-	else
-		ewarn "${m_name} Support has been marked as needing testing in this"
-		ewarn "ebuild revision.  This usually means that any patches to support"
-		ewarn "${m_name} have been forward ported and maybe even compile-tested,"
-		ewarn "but not yet booted on real hardware, possibly due to a lack of access"
-		ewarn "to such hardware.  If you happen to boot this kernel and have no"
-		ewarn "problems at all, then please inform the maintainer.  Otherwise, if"
-		ewarn "experience a bug, an oops/panic, or some other oddity, then please"
-		ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
-	fi
-
-	return 0
-}
-
-err_only_one_mach_allowed() {
-	echo -e ""
-	eerror "A patchset for a specific machine-type has already been selected."
-	eerror "No other patches for machines-types are permitted.  You will need a"
-	eerror "separate copy of the kernel sources for each different machine-type"
-	eerror "you want to build a kernel for."
-	die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
-	# Symlink /usr/src/linux as appropriate
-	local my_ksrc="${S##*/}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && my_ksrc="${my_ksrc}.${x}"
-	done
-
-	if [ ! -e "${ROOT}usr/src/linux" ]; then
-		rm -f "${ROOT}usr/src/linux"
-		ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
-	fi
-}
-
-pkg_setup() {
-	local arch_is_selected="no"
-	local m_ip m_enable m_name
-
-	# Exclusive machine patchsets
-	# These are not allowed to be mixed together, thus only one of them may be applied
-	# to a tree per merge.
-	for x in									\
-		"ip27 SGI Origin 200/2000"						\
-		"ip28 SGI Indigo2 Impact R10000"					\
-		"ip30 SGI Octane"
-	do
-		set -- ${x}		# Set positional params
-		m_ip="${1}"		# Grab the first param (HW IP for SGI)
-		shift			# Shift the positions
-		m_name="${*}"		# Get the rest (Name)
-
-		if use ${m_ip}; then
-			# Fetch the value indiciating if the machine is enabled or not
-			m_enable="DO_${m_ip/ip/IP}"
-			m_enable="${!m_enable}"
-
-			# Make sure only one of these exclusive machine patches is selected
-			[ "${arch_is_selected}" = "no" ]				\
-				&& arch_is_selected="yes"				\
-				|| err_only_one_mach_allowed
-
-			# Is the machine support disabled or marked as needing testing?
-			[ "${m_enable}" = "test" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
-			[ "${m_enable}" = "no" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
-			# Show relevant information about the machine
-			show_${m_ip}_info
-		fi
-	done
-
-	# All other systems that don't have a USE flag go here
-	# These systems have base-line support included in linux-mips git, so
-	# instead of failing, if disabled, we simply warn the user
-	if [ "${arch_is_selected}" = "no" ]; then
-		[ "${DO_IP22}" = "no" ]							\
-			&& err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip"	\
-			|| show_ip22_info
-		[ "${DO_IP32}" = "no" ]							\
-			&& err_disabled_mach "SGI O2" "IP32" "skip"			\
-			|| show_ip32_info
-
-	fi
-}
-
-show_ip22_info() {
-	echo -e ""
-	einfo "IP22 systems with an R5000 processor should work with this release."
-	einfo "The R4x00 series of processors tend to be rather flaky, especially the"
-	einfo "R4600.  If you have to run an R4x00 processor, then try to use an R4400."
-	einfo ""
-	einfo "Some Notes:"
-	einfo "\t- Supported graphics card right now is Newport (XL)."
-	einfo "\t- A driver for Extreme (XZ) does not exist at present."
-	echo -e ""
-}
-
-show_ip27_info() {
-	echo -e ""
-	ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
-	ewarn "in move_freepages() in mm/page_alloc.c.  The exact trigger cause is"
-	ewarn "unknown at this time.  Please report any oops messages from this"
-	ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
-	echo -e ""
-}
-
-show_ip28_info() {
-	echo -e ""
-	einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel.  However,"
-	einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
-	einfo "nothing is guaranteed to work correctly.  Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
-	einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
-	einfo "feedback that can be used to trace down the crash."
-	echo -e ""
-}
-
-show_ip30_info() {
-	echo -e ""
-	eerror "Things that DON'T work:"
-	eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
-	eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
-	eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
-	eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
-	eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
-	eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
-	eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
-	echo -e ""
-	ewarn "Things that might work, but have problems, or are unknown:"
-	ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
-	ewarn "\t\040\040intermittent issues.  Additionally, CONFIG_HUGETLBFS must also be"
-	ewarn "\t\040\040selected for hugepages to work.  If use of this feature continues"
-	ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
-	ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
-	ewarn "\t\040\040after powering it down for at least 30 seconds."
-	ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
-	ewarn "\t\040\040the 16550A chip on the IOC3 directly.  It does not use interrupts,"
-	ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
-	ewarn "\t\040\040intensive.  The baud rate is limited to no more than 38.4kbps on"
-	ewarn "\t\040\040this driver.  Patches for getting the Altix IOC3 serial driver to"
-	ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
-	ewarn "\t- UHCI Cards are known to have issues, but should still function."
-	ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
-	ewarn "\t\040\040adapters."
-	ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
-	ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
-	ewarn "\t\040\040UART driver.  The NIC part number is also not read correctly"
-	ewarn "\t\040\040from the four Number-In-a-Cans.  Additional testing would be"
-	ewarn "\t\040\040appreciated and patches welcome."
-	ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
-	ewarn "\t\040\040and are not guaranteed to work.  This applies to various digital"
-	ewarn "\t\040\040video conversion boards as well."
-	echo -e ""
-	einfo "Things that DO work:"
-	einfo "\t- SMP works again, celebrate!"
-	einfo "\t- Impact (MGRAS) console only."
-	einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
-	einfo "\t- PCI Card Cages should work for many devices, except certain types like"
-	einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
-	einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse.  Please"
-	einfo "\t\040\040report any problems with these devices."
-	echo -e ""
-}
-
-show_ip32_info() {
-	echo -e ""
-	einfo "IP32 systems function well, however there are some notes:"
-	einfo "\t- A sound driver now exists for IP32.  Celebrate!"
-	einfo "\t- Framebuffer console is limited to 4MB.  Anything greater"
-	einfo "\t\040\040specified when building the kernel will likely oops"
-	einfo "\t\040\040or panic the kernel."
-	einfo "\t- X support is limited to the generic fbdev driver.  No X"
-	einfo "\t\040\040gbefb driver exists for O2 yet.  Feel free to submit"
-	einfo "\t\040\040patches!"
-	echo -e ""
-
-	einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
-	einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
-	einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
-	# Unpack the kernel sources, update to the latest rev (if needed),
-	# and apply the latest patch from linux-mips git.
-	kernel-2_src_unpack
-
-	# Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
-	echo -e ""
-	cd "${WORKDIR}"
-	unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-	# Create a new folder called  'patch-symlinks' and create symlinks to
-	# all mips-patches in there.  If we want to exclude a patch, we'll
-	# just delete the symlink instead of the actual patch.
-	local psym="patch-symlinks"
-	mkdir "${psym}"
-	cd "${psym}"
-	for x in ../mips-patches-${BASE_KV}/*.patch; do
-		ln -s "${x}" "${x##../mips-patches-*/}"
-	done
-
-	# With symlinks created, setup the variables referencing external
-	# machine patches and if a machine USE flag is enabled, then unset
-	# its corresponding variable.
-	# See 0000_README for the patch numbers and their meanings.
-	local p_generic="51*"
-	local p_ip27="52*" p_ip28="53*" p_ip30="54*"
-	local p_xp="80*"
-	use ip27 && unset p_generic p_ip27
-	use ip28 && unset p_ip28
-	use ip30 && unset p_generic p_ip30
-	use experimental && unset p_xp
-
-	# Remove symlinks for any patches that we don't want applied.  We
-	# do this by looping through all the above variables, and deleting
-	# matching symlinks that point to the corresponding patches.
-	# The remaining symlinks will be applied to the kernel source.
-	#
-	# $P_EXCLUDE is a new var that can be set in an ebuild to exclude
-	# specific patches by wildcarding the patch number.
-	local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
-	for x in $patchlist;
-		do rm -f "./${x}"
-	done
-
-	# Rename the source tree to match the linux-mips git checkout date and
-	# machine type.
-	local fkv="${F_KV%-*}"
-	local v="${fkv}-${GITDATE}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && v="${v}.${x}" && break
-	done
-	mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
-	S="${WORKDIR}/linux-${v}"
-
-	# Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
-	EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
-	unpack_set_extraversion
-}
-
-src_prepare() {
-	local psym="patch-symlinks"
-
-	# Now go into the kernel source and patch it.
-	cd "${S}"
-	epatch -p1 "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.4.79.ebuild b/sys-kernel/mips-sources/mips-sources-4.4.79.ebuild
deleted file mode 100644
index ee4aae1d80de..000000000000
--- a/sys-kernel/mips-sources/mips-sources-4.4.79.ebuild
+++ /dev/null
@@ -1,348 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20160123"			# Date of diff between kernel.org and lmo GIT
-GENPATCHREV="2"				# Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.3"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# EPATCH Vars
-# XXX: Required to properly apply Impact/Odyssey driver patches.
-EPATCH_OPTS="-F3"
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
-	>=sys-devel/gcc-4.7.0
-	>=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test"				# If "yes", enable IP22 support		(SGI Indy, Indigo2 R4x00)
-DO_IP27="yes"				# 		   IP27 support		(SGI Origin)
-DO_IP28="test"				# 		   IP28 support		(SGI Indigo2 Impact R10000)
-DO_IP30="yes"				# 		   IP30 support		(SGI Octane)
-DO_IP32="yes"				# 		   IP32 support		(SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22=""				# If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27=""				# 	    DO_IP27 == "no", 			   IP27
-SV_IP28=""				# 	    DO_IP28 == "no", 			   IP28
-SV_IP30=""				# 	    DO_IP30 == "no", 			   IP30
-SV_IP32=""				# 	    DO_IP32 == "no", 			   IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
-	 mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
-	 mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
-	# Get args
-	local m_name="${1}"
-	local m_abbr="${2}"
-	local m_use="${3}"
-	local is_test="${4}"
-
-	# Get stable version, if exists
-	local stable_ver="SV_${m_abbr}"
-	stable_ver="${!stable_ver}"
-
-	# See if this machine needs a USE passed or skip dying
-	local has_use
-	[ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
-	# Print error && (maybe) die
-	echo -e ""
-	if [ "${is_test}" != "test" ]; then
-		eerror "${m_name} Support has been disabled in this ebuild"
-		eerror "revision.  If you wish to merge ${m_name} sources, then"
-		eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
-		[ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
-	else
-		ewarn "${m_name} Support has been marked as needing testing in this"
-		ewarn "ebuild revision.  This usually means that any patches to support"
-		ewarn "${m_name} have been forward ported and maybe even compile-tested,"
-		ewarn "but not yet booted on real hardware, possibly due to a lack of access"
-		ewarn "to such hardware.  If you happen to boot this kernel and have no"
-		ewarn "problems at all, then please inform the maintainer.  Otherwise, if"
-		ewarn "experience a bug, an oops/panic, or some other oddity, then please"
-		ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
-	fi
-
-	return 0
-}
-
-err_only_one_mach_allowed() {
-	echo -e ""
-	eerror "A patchset for a specific machine-type has already been selected."
-	eerror "No other patches for machines-types are permitted.  You will need a"
-	eerror "separate copy of the kernel sources for each different machine-type"
-	eerror "you want to build a kernel for."
-	die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
-	# Symlink /usr/src/linux as appropriate
-	local my_ksrc="${S##*/}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && my_ksrc="${my_ksrc}.${x}"
-	done
-
-	if [ ! -e "${ROOT}usr/src/linux" ]; then
-		rm -f "${ROOT}usr/src/linux"
-		ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
-	fi
-}
-
-pkg_setup() {
-	local arch_is_selected="no"
-	local m_ip m_enable m_name
-
-	# Exclusive machine patchsets
-	# These are not allowed to be mixed together, thus only one of them may be applied
-	# to a tree per merge.
-	for x in									\
-		"ip27 SGI Origin 200/2000"						\
-		"ip28 SGI Indigo2 Impact R10000"					\
-		"ip30 SGI Octane"
-	do
-		set -- ${x}		# Set positional params
-		m_ip="${1}"		# Grab the first param (HW IP for SGI)
-		shift			# Shift the positions
-		m_name="${*}"		# Get the rest (Name)
-
-		if use ${m_ip}; then
-			# Fetch the value indiciating if the machine is enabled or not
-			m_enable="DO_${m_ip/ip/IP}"
-			m_enable="${!m_enable}"
-
-			# Make sure only one of these exclusive machine patches is selected
-			[ "${arch_is_selected}" = "no" ]				\
-				&& arch_is_selected="yes"				\
-				|| err_only_one_mach_allowed
-
-			# Is the machine support disabled or marked as needing testing?
-			[ "${m_enable}" = "test" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
-			[ "${m_enable}" = "no" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
-			# Show relevant information about the machine
-			show_${m_ip}_info
-		fi
-	done
-
-	# All other systems that don't have a USE flag go here
-	# These systems have base-line support included in linux-mips git, so
-	# instead of failing, if disabled, we simply warn the user
-	if [ "${arch_is_selected}" = "no" ]; then
-		[ "${DO_IP22}" = "no" ]							\
-			&& err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip"	\
-			|| show_ip22_info
-		[ "${DO_IP32}" = "no" ]							\
-			&& err_disabled_mach "SGI O2" "IP32" "skip"			\
-			|| show_ip32_info
-
-	fi
-}
-
-show_ip22_info() {
-	echo -e ""
-	einfo "IP22 systems with an R5000 processor should work with this release."
-	einfo "The R4x00 series of processors tend to be rather flaky, especially the"
-	einfo "R4600.  If you have to run an R4x00 processor, then try to use an R4400."
-	einfo ""
-	einfo "Some Notes:"
-	einfo "\t- Supported graphics card right now is Newport (XL)."
-	einfo "\t- A driver for Extreme (XZ) does not exist at present."
-	echo -e ""
-}
-
-show_ip27_info() {
-	echo -e ""
-	ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
-	ewarn "in move_freepages() in mm/page_alloc.c.  The exact trigger cause is"
-	ewarn "unknown at this time.  Please report any oops messages from this"
-	ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
-	echo -e ""
-}
-
-show_ip28_info() {
-	echo -e ""
-	einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel.  However,"
-	einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
-	einfo "nothing is guaranteed to work correctly.  Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
-	einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
-	einfo "feedback that can be used to trace down the crash."
-	echo -e ""
-}
-
-show_ip30_info() {
-	echo -e ""
-	eerror "Things that DON'T work:"
-	eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
-	eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
-	eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
-	eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
-	eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
-	eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
-	eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
-	echo -e ""
-	ewarn "Things that might work, but have problems, or are unknown:"
-	ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
-	ewarn "\t\040\040intermittent issues.  Additionally, CONFIG_HUGETLBFS must also be"
-	ewarn "\t\040\040selected for hugepages to work.  If use of this feature continues"
-	ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
-	ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
-	ewarn "\t\040\040after powering it down for at least 30 seconds."
-	ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
-	ewarn "\t\040\040the 16550A chip on the IOC3 directly.  It does not use interrupts,"
-	ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
-	ewarn "\t\040\040intensive.  The baud rate is limited to no more than 38.4kbps on"
-	ewarn "\t\040\040this driver.  Patches for getting the Altix IOC3 serial driver to"
-	ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
-	ewarn "\t- UHCI Cards are known to have issues, but should still function."
-	ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
-	ewarn "\t\040\040adapters."
-	ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
-	ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
-	ewarn "\t\040\040UART driver.  The NIC part number is also not read correctly"
-	ewarn "\t\040\040from the four Number-In-a-Cans.  Additional testing would be"
-	ewarn "\t\040\040appreciated and patches welcome."
-	ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
-	ewarn "\t\040\040and are not guaranteed to work.  This applies to various digital"
-	ewarn "\t\040\040video conversion boards as well."
-	echo -e ""
-	einfo "Things that DO work:"
-	einfo "\t- SMP works again, celebrate!"
-	einfo "\t- Impact (MGRAS) console only."
-	einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
-	einfo "\t- PCI Card Cages should work for many devices, except certain types like"
-	einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
-	einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse.  Please"
-	einfo "\t\040\040report any problems with these devices."
-	echo -e ""
-}
-
-show_ip32_info() {
-	echo -e ""
-	einfo "IP32 systems function well, however there are some notes:"
-	einfo "\t- A sound driver now exists for IP32.  Celebrate!"
-	einfo "\t- Framebuffer console is limited to 4MB.  Anything greater"
-	einfo "\t\040\040specified when building the kernel will likely oops"
-	einfo "\t\040\040or panic the kernel."
-	einfo "\t- X support is limited to the generic fbdev driver.  No X"
-	einfo "\t\040\040gbefb driver exists for O2 yet.  Feel free to submit"
-	einfo "\t\040\040patches!"
-	echo -e ""
-
-	einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
-	einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
-	einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
-	# Unpack the kernel sources, update to the latest rev (if needed),
-	# and apply the latest patch from linux-mips git.
-	kernel-2_src_unpack
-
-	# Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
-	echo -e ""
-	cd "${WORKDIR}"
-	unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-	# Create a new folder called  'patch-symlinks' and create symlinks to
-	# all mips-patches in there.  If we want to exclude a patch, we'll
-	# just delete the symlink instead of the actual patch.
-	local psym="patch-symlinks"
-	mkdir "${psym}"
-	cd "${psym}"
-	for x in ../mips-patches-${BASE_KV}/*.patch; do
-		ln -s "${x}" "${x##../mips-patches-*/}"
-	done
-
-	# With symlinks created, setup the variables referencing external
-	# machine patches and if a machine USE flag is enabled, then unset
-	# its corresponding variable.
-	# See 0000_README for the patch numbers and their meanings.
-	local p_generic="51*"
-	local p_ip27="52*" p_ip28="53*" p_ip30="54*"
-	local p_xp="80*"
-	use ip27 && unset p_generic p_ip27
-	use ip28 && unset p_ip28
-	use ip30 && unset p_generic p_ip30
-	use experimental && unset p_xp
-
-	# Remove symlinks for any patches that we don't want applied.  We
-	# do this by looping through all the above variables, and deleting
-	# matching symlinks that point to the corresponding patches.
-	# The remaining symlinks will be applied to the kernel source.
-	#
-	# $P_EXCLUDE is a new var that can be set in an ebuild to exclude
-	# specific patches by wildcarding the patch number.
-	local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
-	for x in $patchlist;
-		do rm -f "./${x}"
-	done
-
-	# Rename the source tree to match the linux-mips git checkout date and
-	# machine type.
-	local fkv="${F_KV%-*}"
-	local v="${fkv}-${GITDATE}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && v="${v}.${x}" && break
-	done
-	mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
-	S="${WORKDIR}/linux-${v}"
-
-	# Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
-	EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
-	unpack_set_extraversion
-}
-
-src_prepare() {
-	local psym="patch-symlinks"
-
-	# Now go into the kernel source and patch it.
-	cd "${S}"
-	epatch "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild b/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild
deleted file mode 100644
index 724e72f9b399..000000000000
--- a/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild
+++ /dev/null
@@ -1,348 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20161016"			# Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1"				# Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.7"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# EPATCH Vars
-# XXX: Required to properly apply Impact/Odyssey driver patches.
-EPATCH_OPTS="-F3"
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
-	>=sys-devel/gcc-4.7.0
-	>=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test"				# If "yes", enable IP22 support		(SGI Indy, Indigo2 R4x00)
-DO_IP27="yes"				# 		   IP27 support		(SGI Origin)
-DO_IP28="test"				# 		   IP28 support		(SGI Indigo2 Impact R10000)
-DO_IP30="yes"				# 		   IP30 support		(SGI Octane)
-DO_IP32="yes"				# 		   IP32 support		(SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22=""				# If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27=""				# 	    DO_IP27 == "no", 			   IP27
-SV_IP28=""				# 	    DO_IP28 == "no", 			   IP28
-SV_IP30=""				# 	    DO_IP30 == "no", 			   IP30
-SV_IP32=""				# 	    DO_IP32 == "no", 			   IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
-	 mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
-	 mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
-	# Get args
-	local m_name="${1}"
-	local m_abbr="${2}"
-	local m_use="${3}"
-	local is_test="${4}"
-
-	# Get stable version, if exists
-	local stable_ver="SV_${m_abbr}"
-	stable_ver="${!stable_ver}"
-
-	# See if this machine needs a USE passed or skip dying
-	local has_use
-	[ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
-	# Print error && (maybe) die
-	echo -e ""
-	if [ "${is_test}" != "test" ]; then
-		eerror "${m_name} Support has been disabled in this ebuild"
-		eerror "revision.  If you wish to merge ${m_name} sources, then"
-		eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
-		[ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
-	else
-		ewarn "${m_name} Support has been marked as needing testing in this"
-		ewarn "ebuild revision.  This usually means that any patches to support"
-		ewarn "${m_name} have been forward ported and maybe even compile-tested,"
-		ewarn "but not yet booted on real hardware, possibly due to a lack of access"
-		ewarn "to such hardware.  If you happen to boot this kernel and have no"
-		ewarn "problems at all, then please inform the maintainer.  Otherwise, if"
-		ewarn "experience a bug, an oops/panic, or some other oddity, then please"
-		ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
-	fi
-
-	return 0
-}
-
-err_only_one_mach_allowed() {
-	echo -e ""
-	eerror "A patchset for a specific machine-type has already been selected."
-	eerror "No other patches for machines-types are permitted.  You will need a"
-	eerror "separate copy of the kernel sources for each different machine-type"
-	eerror "you want to build a kernel for."
-	die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
-	# Symlink /usr/src/linux as appropriate
-	local my_ksrc="${S##*/}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && my_ksrc="${my_ksrc}.${x}"
-	done
-
-	if [ ! -e "${ROOT}usr/src/linux" ]; then
-		rm -f "${ROOT}usr/src/linux"
-		ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
-	fi
-}
-
-pkg_setup() {
-	local arch_is_selected="no"
-	local m_ip m_enable m_name
-
-	# Exclusive machine patchsets
-	# These are not allowed to be mixed together, thus only one of them may be applied
-	# to a tree per merge.
-	for x in									\
-		"ip27 SGI Origin 200/2000"						\
-		"ip28 SGI Indigo2 Impact R10000"					\
-		"ip30 SGI Octane"
-	do
-		set -- ${x}		# Set positional params
-		m_ip="${1}"		# Grab the first param (HW IP for SGI)
-		shift			# Shift the positions
-		m_name="${*}"		# Get the rest (Name)
-
-		if use ${m_ip}; then
-			# Fetch the value indiciating if the machine is enabled or not
-			m_enable="DO_${m_ip/ip/IP}"
-			m_enable="${!m_enable}"
-
-			# Make sure only one of these exclusive machine patches is selected
-			[ "${arch_is_selected}" = "no" ]				\
-				&& arch_is_selected="yes"				\
-				|| err_only_one_mach_allowed
-
-			# Is the machine support disabled or marked as needing testing?
-			[ "${m_enable}" = "test" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
-			[ "${m_enable}" = "no" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
-			# Show relevant information about the machine
-			show_${m_ip}_info
-		fi
-	done
-
-	# All other systems that don't have a USE flag go here
-	# These systems have base-line support included in linux-mips git, so
-	# instead of failing, if disabled, we simply warn the user
-	if [ "${arch_is_selected}" = "no" ]; then
-		[ "${DO_IP22}" = "no" ]							\
-			&& err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip"	\
-			|| show_ip22_info
-		[ "${DO_IP32}" = "no" ]							\
-			&& err_disabled_mach "SGI O2" "IP32" "skip"			\
-			|| show_ip32_info
-
-	fi
-}
-
-show_ip22_info() {
-	echo -e ""
-	einfo "IP22 systems with an R5000 processor should work with this release."
-	einfo "The R4x00 series of processors tend to be rather flaky, especially the"
-	einfo "R4600.  If you have to run an R4x00 processor, then try to use an R4400."
-	einfo ""
-	einfo "Some Notes:"
-	einfo "\t- Supported graphics card right now is Newport (XL)."
-	einfo "\t- A driver for Extreme (XZ) does not exist at present."
-	echo -e ""
-}
-
-show_ip27_info() {
-	echo -e ""
-	ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
-	ewarn "in move_freepages() in mm/page_alloc.c.  The exact trigger cause is"
-	ewarn "unknown at this time.  Please report any oops messages from this"
-	ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
-	echo -e ""
-}
-
-show_ip28_info() {
-	echo -e ""
-	einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel.  However,"
-	einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
-	einfo "nothing is guaranteed to work correctly.  Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
-	einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
-	einfo "feedback that can be used to trace down the crash."
-	echo -e ""
-}
-
-show_ip30_info() {
-	echo -e ""
-	eerror "Things that DON'T work:"
-	eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
-	eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
-	eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
-	eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
-	eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
-	eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
-	eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
-	echo -e ""
-	ewarn "Things that might work, but have problems, or are unknown:"
-	ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
-	ewarn "\t\040\040intermittent issues.  Additionally, CONFIG_HUGETLBFS must also be"
-	ewarn "\t\040\040selected for hugepages to work.  If use of this feature continues"
-	ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
-	ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
-	ewarn "\t\040\040after powering it down for at least 30 seconds."
-	ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
-	ewarn "\t\040\040the 16550A chip on the IOC3 directly.  It does not use interrupts,"
-	ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
-	ewarn "\t\040\040intensive.  The baud rate is limited to no more than 38.4kbps on"
-	ewarn "\t\040\040this driver.  Patches for getting the Altix IOC3 serial driver to"
-	ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
-	ewarn "\t- UHCI Cards are known to have issues, but should still function."
-	ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
-	ewarn "\t\040\040adapters."
-	ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
-	ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
-	ewarn "\t\040\040UART driver.  The NIC part number is also not read correctly"
-	ewarn "\t\040\040from the four Number-In-a-Cans.  Additional testing would be"
-	ewarn "\t\040\040appreciated and patches welcome."
-	ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
-	ewarn "\t\040\040and are not guaranteed to work.  This applies to various digital"
-	ewarn "\t\040\040video conversion boards as well."
-	echo -e ""
-	einfo "Things that DO work:"
-	einfo "\t- SMP works again, celebrate!"
-	einfo "\t- Impact (MGRAS) console only."
-	einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
-	einfo "\t- PCI Card Cages should work for many devices, except certain types like"
-	einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
-	einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse.  Please"
-	einfo "\t\040\040report any problems with these devices."
-	echo -e ""
-}
-
-show_ip32_info() {
-	echo -e ""
-	einfo "IP32 systems function well, however there are some notes:"
-	einfo "\t- A sound driver now exists for IP32.  Celebrate!"
-	einfo "\t- Framebuffer console is limited to 4MB.  Anything greater"
-	einfo "\t\040\040specified when building the kernel will likely oops"
-	einfo "\t\040\040or panic the kernel."
-	einfo "\t- X support is limited to the generic fbdev driver.  No X"
-	einfo "\t\040\040gbefb driver exists for O2 yet.  Feel free to submit"
-	einfo "\t\040\040patches!"
-	echo -e ""
-
-	einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
-	einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
-	einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
-	# Unpack the kernel sources, update to the latest rev (if needed),
-	# and apply the latest patch from linux-mips git.
-	kernel-2_src_unpack
-
-	# Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
-	echo -e ""
-	cd "${WORKDIR}"
-	unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-	# Create a new folder called  'patch-symlinks' and create symlinks to
-	# all mips-patches in there.  If we want to exclude a patch, we'll
-	# just delete the symlink instead of the actual patch.
-	local psym="patch-symlinks"
-	mkdir "${psym}"
-	cd "${psym}"
-	for x in ../mips-patches-${BASE_KV}/*.patch; do
-		ln -s "${x}" "${x##../mips-patches-*/}"
-	done
-
-	# With symlinks created, setup the variables referencing external
-	# machine patches and if a machine USE flag is enabled, then unset
-	# its corresponding variable.
-	# See 0000_README for the patch numbers and their meanings.
-	local p_generic="51*"
-	local p_ip27="52*" p_ip28="53*" p_ip30="54*"
-	local p_xp="80*"
-	use ip27 && unset p_generic p_ip27
-	use ip28 && unset p_ip28
-	use ip30 && unset p_generic p_ip30
-	use experimental && unset p_xp
-
-	# Remove symlinks for any patches that we don't want applied.  We
-	# do this by looping through all the above variables, and deleting
-	# matching symlinks that point to the corresponding patches.
-	# The remaining symlinks will be applied to the kernel source.
-	#
-	# $P_EXCLUDE is a new var that can be set in an ebuild to exclude
-	# specific patches by wildcarding the patch number.
-	local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
-	for x in $patchlist;
-		do rm -f "./${x}"
-	done
-
-	# Rename the source tree to match the linux-mips git checkout date and
-	# machine type.
-	local fkv="${F_KV%-*}"
-	local v="${fkv}-${GITDATE}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && v="${v}.${x}" && break
-	done
-	mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
-	S="${WORKDIR}/linux-${v}"
-
-	# Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
-	EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
-	unpack_set_extraversion
-}
-
-src_prepare() {
-	local psym="patch-symlinks"
-
-	# Now go into the kernel source and patch it.
-	cd "${S}"
-	epatch "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.9.40.ebuild b/sys-kernel/mips-sources/mips-sources-4.9.40.ebuild
deleted file mode 100644
index 36671f256fb3..000000000000
--- a/sys-kernel/mips-sources/mips-sources-4.9.40.ebuild
+++ /dev/null
@@ -1,344 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20161216"			# Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1"				# Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.8"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
-	>=sys-devel/gcc-4.7.0
-	>=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test"				# If "yes", enable IP22 support		(SGI Indy, Indigo2 R4x00)
-DO_IP27="yes"				# 		   IP27 support		(SGI Origin)
-DO_IP28="test"				# 		   IP28 support		(SGI Indigo2 Impact R10000)
-DO_IP30="yes"				# 		   IP30 support		(SGI Octane)
-DO_IP32="yes"				# 		   IP32 support		(SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22=""				# If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27=""				# 	    DO_IP27 == "no", 			   IP27
-SV_IP28=""				# 	    DO_IP28 == "no", 			   IP28
-SV_IP30=""				# 	    DO_IP30 == "no", 			   IP30
-SV_IP32=""				# 	    DO_IP32 == "no", 			   IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
-	 mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
-	 mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
-	# Get args
-	local m_name="${1}"
-	local m_abbr="${2}"
-	local m_use="${3}"
-	local is_test="${4}"
-
-	# Get stable version, if exists
-	local stable_ver="SV_${m_abbr}"
-	stable_ver="${!stable_ver}"
-
-	# See if this machine needs a USE passed or skip dying
-	local has_use
-	[ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
-	# Print error && (maybe) die
-	echo -e ""
-	if [ "${is_test}" != "test" ]; then
-		eerror "${m_name} Support has been disabled in this ebuild"
-		eerror "revision.  If you wish to merge ${m_name} sources, then"
-		eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
-		[ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
-	else
-		ewarn "${m_name} Support has been marked as needing testing in this"
-		ewarn "ebuild revision.  This usually means that any patches to support"
-		ewarn "${m_name} have been forward ported and maybe even compile-tested,"
-		ewarn "but not yet booted on real hardware, possibly due to a lack of access"
-		ewarn "to such hardware.  If you happen to boot this kernel and have no"
-		ewarn "problems at all, then please inform the maintainer.  Otherwise, if"
-		ewarn "experience a bug, an oops/panic, or some other oddity, then please"
-		ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
-	fi
-
-	return 0
-}
-
-err_only_one_mach_allowed() {
-	echo -e ""
-	eerror "A patchset for a specific machine-type has already been selected."
-	eerror "No other patches for machines-types are permitted.  You will need a"
-	eerror "separate copy of the kernel sources for each different machine-type"
-	eerror "you want to build a kernel for."
-	die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
-	# Symlink /usr/src/linux as appropriate
-	local my_ksrc="${S##*/}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && my_ksrc="${my_ksrc}.${x}"
-	done
-
-	if [ ! -e "${ROOT}usr/src/linux" ]; then
-		rm -f "${ROOT}usr/src/linux"
-		ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
-	fi
-}
-
-pkg_setup() {
-	local arch_is_selected="no"
-	local m_ip m_enable m_name
-
-	# Exclusive machine patchsets
-	# These are not allowed to be mixed together, thus only one of them may be applied
-	# to a tree per merge.
-	for x in									\
-		"ip27 SGI Origin 200/2000"						\
-		"ip28 SGI Indigo2 Impact R10000"					\
-		"ip30 SGI Octane"
-	do
-		set -- ${x}		# Set positional params
-		m_ip="${1}"		# Grab the first param (HW IP for SGI)
-		shift			# Shift the positions
-		m_name="${*}"		# Get the rest (Name)
-
-		if use ${m_ip}; then
-			# Fetch the value indiciating if the machine is enabled or not
-			m_enable="DO_${m_ip/ip/IP}"
-			m_enable="${!m_enable}"
-
-			# Make sure only one of these exclusive machine patches is selected
-			[ "${arch_is_selected}" = "no" ]				\
-				&& arch_is_selected="yes"				\
-				|| err_only_one_mach_allowed
-
-			# Is the machine support disabled or marked as needing testing?
-			[ "${m_enable}" = "test" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
-			[ "${m_enable}" = "no" ]					\
-				&& err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
-			# Show relevant information about the machine
-			show_${m_ip}_info
-		fi
-	done
-
-	# All other systems that don't have a USE flag go here
-	# These systems have base-line support included in linux-mips git, so
-	# instead of failing, if disabled, we simply warn the user
-	if [ "${arch_is_selected}" = "no" ]; then
-		[ "${DO_IP22}" = "no" ]							\
-			&& err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip"	\
-			|| show_ip22_info
-		[ "${DO_IP32}" = "no" ]							\
-			&& err_disabled_mach "SGI O2" "IP32" "skip"			\
-			|| show_ip32_info
-
-	fi
-}
-
-show_ip22_info() {
-	echo -e ""
-	einfo "IP22 systems with an R5000 processor should work with this release."
-	einfo "The R4x00 series of processors tend to be rather flaky, especially the"
-	einfo "R4600.  If you have to run an R4x00 processor, then try to use an R4400."
-	einfo ""
-	einfo "Some Notes:"
-	einfo "\t- Supported graphics card right now is Newport (XL)."
-	einfo "\t- A driver for Extreme (XZ) does not exist at present."
-	echo -e ""
-}
-
-show_ip27_info() {
-	echo -e ""
-	ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
-	ewarn "in move_freepages() in mm/page_alloc.c.  The exact trigger cause is"
-	ewarn "unknown at this time.  Please report any oops messages from this"
-	ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
-	echo -e ""
-}
-
-show_ip28_info() {
-	echo -e ""
-	einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel.  However,"
-	einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
-	einfo "nothing is guaranteed to work correctly.  Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
-	einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
-	einfo "feedback that can be used to trace down the crash."
-	echo -e ""
-}
-
-show_ip30_info() {
-	echo -e ""
-	eerror "Things that DON'T work:"
-	eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
-	eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
-	eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
-	eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
-	eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
-	eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
-	eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
-	echo -e ""
-	ewarn "Things that might work, but have problems, or are unknown:"
-	ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
-	ewarn "\t\040\040intermittent issues.  Additionally, CONFIG_HUGETLBFS must also be"
-	ewarn "\t\040\040selected for hugepages to work.  If use of this feature continues"
-	ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
-	ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
-	ewarn "\t\040\040after powering it down for at least 30 seconds."
-	ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
-	ewarn "\t\040\040the 16550A chip on the IOC3 directly.  It does not use interrupts,"
-	ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
-	ewarn "\t\040\040intensive.  The baud rate is limited to no more than 38.4kbps on"
-	ewarn "\t\040\040this driver.  Patches for getting the Altix IOC3 serial driver to"
-	ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
-	ewarn "\t- UHCI Cards are known to have issues, but should still function."
-	ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
-	ewarn "\t\040\040adapters."
-	ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
-	ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
-	ewarn "\t\040\040UART driver.  The NIC part number is also not read correctly"
-	ewarn "\t\040\040from the four Number-In-a-Cans.  Additional testing would be"
-	ewarn "\t\040\040appreciated and patches welcome."
-	ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
-	ewarn "\t\040\040and are not guaranteed to work.  This applies to various digital"
-	ewarn "\t\040\040video conversion boards as well."
-	echo -e ""
-	einfo "Things that DO work:"
-	einfo "\t- SMP works again, celebrate!"
-	einfo "\t- Impact (MGRAS) console only."
-	einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
-	einfo "\t- PCI Card Cages should work for many devices, except certain types like"
-	einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
-	einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse.  Please"
-	einfo "\t\040\040report any problems with these devices."
-	echo -e ""
-}
-
-show_ip32_info() {
-	echo -e ""
-	einfo "IP32 systems function well, however there are some notes:"
-	einfo "\t- A sound driver now exists for IP32.  Celebrate!"
-	einfo "\t- Framebuffer console is limited to 4MB.  Anything greater"
-	einfo "\t\040\040specified when building the kernel will likely oops"
-	einfo "\t\040\040or panic the kernel."
-	einfo "\t- X support is limited to the generic fbdev driver.  No X"
-	einfo "\t\040\040gbefb driver exists for O2 yet.  Feel free to submit"
-	einfo "\t\040\040patches!"
-	echo -e ""
-
-	einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
-	einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
-	einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
-	# Unpack the kernel sources, update to the latest rev (if needed),
-	# and apply the latest patch from linux-mips git.
-	kernel-2_src_unpack
-
-	# Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
-	echo -e ""
-	cd "${WORKDIR}"
-	unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-	# Create a new folder called  'patch-symlinks' and create symlinks to
-	# all mips-patches in there.  If we want to exclude a patch, we'll
-	# just delete the symlink instead of the actual patch.
-	local psym="patch-symlinks"
-	mkdir "${psym}"
-	cd "${psym}"
-	for x in ../mips-patches-${BASE_KV}/*.patch; do
-		ln -s "${x}" "${x##../mips-patches-*/}"
-	done
-
-	# With symlinks created, setup the variables referencing external
-	# machine patches and if a machine USE flag is enabled, then unset
-	# its corresponding variable.
-	# See 0000_README for the patch numbers and their meanings.
-	local p_generic="51*"
-	local p_ip27="52*" p_ip28="53*" p_ip30="54*"
-	local p_xp="80*"
-	use ip27 && unset p_generic p_ip27
-	use ip28 && unset p_ip28
-	use ip30 && unset p_generic p_ip30
-	use experimental && unset p_xp
-
-	# Remove symlinks for any patches that we don't want applied.  We
-	# do this by looping through all the above variables, and deleting
-	# matching symlinks that point to the corresponding patches.
-	# The remaining symlinks will be applied to the kernel source.
-	#
-	# $P_EXCLUDE is a new var that can be set in an ebuild to exclude
-	# specific patches by wildcarding the patch number.
-	local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
-	for x in $patchlist;
-		do rm -f "./${x}"
-	done
-
-	# Rename the source tree to match the linux-mips git checkout date and
-	# machine type.
-	local fkv="${F_KV%-*}"
-	local v="${fkv}-${GITDATE}"
-	for x in {ip27,ip28,ip30}; do
-		use ${x} && v="${v}.${x}" && break
-	done
-	mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
-	S="${WORKDIR}/linux-${v}"
-
-	# Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
-	EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
-	unpack_set_extraversion
-}
-
-src_prepare() {
-	local psym="patch-symlinks"
-
-	# Now go into the kernel source and patch it.
-	cd "${S}"
-	epatch "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------