Added ebuilds for kogaion desktop

1 files changed, 667 insertions, 0 deletions

diff --git a/app-misc/rogentoslive-tools/files/1.0/sabutil b/app-misc/rogentoslive-tools/files/1.0/sabutil
new file mode 100755
index 00000000..680a6d1e
--- /dev/null
+++ b/app-misc/rogentoslive-tools/files/1.0/sabutil
@@ -0,0 +1,667 @@
+#!/bin/bash
+
+# Initial version by wolfden.
+# Later changes by Enlik <poczta-sn at gazeta.pl>.
+
+# last change: 9.03.2012
+# most important changes to last version:
+# - abort if non root where needs root permissions
+# - fix fdisk -l pasting
+# - support for xorg.conf.d
+# - reorder options and add rcupdate_pastebin
+
+USER=$(whoami)
+HOMEDIR=${HOME:-/tmp}
+
+function menu
+{
+    local selection=""
+    until  [[ "$selection" = "0" ]] ; do
+        echo "Current Operating System:"
+	cat /etc/sabayon-release
+	echo ""
+        echo "Current Edition:"
+	cat /etc/rogentos-edition
+        echo
+        echo "Pick a choice from menu below:"
+
+        echo ""
+        echo "1 - Backup & edit xorg.conf and xorg.conf.d"
+        echo "2 - Restore xorg.conf and xorg.conf.d from backup"
+        echo "3 - Regenerate Sabayon xorg.conf"
+        echo "4 - Backup & edit grub.cfg"
+        echo "5 - Restore grub.cfg from backup"
+        echo "----------------------------------------"
+        echo "View and AutoPaste:"
+        echo " "
+        echo "01 - Pastebin Xorg configuration files"
+        echo "02 - Pastebin Xorg.0.log"
+        echo "03 - Pastebin ~/.xsession-errors"
+        echo "04 - Pastebin grub.cfg (bootmanager settings)"
+        echo "05 - Pastebin /var/log/dmesg"
+        echo "06 - Pastebin system and hardware info"
+        echo "07 - Pastebin fdisk -l (list the partition tables)"
+        echo "08 - Pastebin rc-update show (show enabled services and the runlevels)"
+        echo "09 - Pastebin rc.log"
+        echo "10 - Pastebin /var/log/messages"
+        echo "11 - Pastebin kdm.log"
+        echo ""
+        echo "0 - Exit"
+        echo ""
+        echo -n "Enter selection: "
+        read selection
+        echo ""
+
+        case $selection in
+            1 ) xorg_backup ; press_enter ; xorg_edit; press_enter ;;
+            2 ) xorg_restore ; press_enter ;;
+            3 ) xorg_regen ; press_enter ;;
+            4 ) grub_backup ; press_enter ; nano -w /boot/grub/grub.cfg; press_enter ;;
+            5 ) grub_restore ; press_enter ;;
+            01 ) xorg_pastebin ; press_enter ;;
+            02 ) xorg0log_pastebin ; press_enter ;;
+            03 ) xsessionerrors_pastebin ; press_enter ;;
+            04 ) grub_pastebin ; press_enter ;;
+            05 ) dmesg_pastebin ; press_enter ;;
+            06 ) system_pastebin ; press_enter ;;
+            07 ) fdisk_pastebin ; press_enter ;;
+            08 ) rcupdate_pastebin ; press_enter ;;
+            09 ) rclog_pastebin ; press_enter ;;
+            10 ) messages_pastebin ; press_enter ;;
+            11 ) kdm_pastebin ; press_enter ;;
+
+            0 ) ;;
+            * ) echo "Please be sensible - choose a number that exists in the menu"; press_enter
+        esac
+    done
+
+}
+
+function press_enter
+{
+    echo ""
+    echo -n "Press Enter to continue"
+    read
+    clear
+}
+
+function is_root
+{
+    if [[ $USER != "root" ]]; then
+        echo "You need to be root to do this." >&2
+        return 1
+    fi
+    return 0
+}
+
+function xorg_regen
+{
+    is_root || return
+
+    if [[ ! -f "/etc/X11/xorg.conf.rogentos" ]]; then
+        cat > /etc/X11/xorg.conf.rogentos <<EOF
+Section "Module"
+    SubSection  "extmod"
+       Option    "omit xfree86-dga"
+    EndSubSection
+    Load        "i2c"
+    Load        "ddc"
+    Load        "synaptics"
+    Load        "vbe"
+#   Load        "dri"
+EndSection
+
+
+Section "ServerFlags"
+     Option     "AllowMouseOpenFail" "true"
+EndSection
+
+Section "InputDevice"
+    Identifier          "Synaptics1"
+    Driver              "synaptics"
+    Option              "SendCoreEvents"        "true"
+    Option              "Device"                "/dev/psaux"
+    Option              "Protocol"              "auto-dev"
+    Option              "HorizScrollDelta"      "0"
+    Option              "SHMConfig"             "on"
+    # For ALPS/MacBook TouchPads
+    #Option             "MaxSpeed"              "0.7"
+    #Option             "MinSpeed"              "0.18"
+    #Option             "AccelFactor"           "0.08"
+    #Option             "TopEdge"               "120"
+    #Option             "LeftEdge"              "120"
+    #Option             "BottomEdge"            "830"
+    #Option             "RightEdge"             "650"
+    #Option             "FingerLow"             "25"
+    #Option             "FingerHigh"            "30"
+    # MacBook touchpad
+    #Option             "MaxTapTime"            "180"
+    #Option             "MaxTapMove"            "220"
+    #Option             "MaxDoubleTapTime"      "180"
+    #Option             "VertScrollDelta"       "20"
+    #Option             "HorizScrollDelta"      "50"
+    #Option             "TapButton2"            "3"
+    #Option             "TapButton3"            "2"
+    #Option             "VertTwoFingerScroll"   "1"
+
+    # Do you keep moving the mouse while typing? Try this trick.
+    #synclient TouchpadOff=1 disable your synaptics touchpad
+    #synclient TouchpadOff=0 enable your synaptics touchpad
+EndSection
+
+
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+    Identifier  "Generic Monitor"
+    VertRefresh 43 - 60
+    HorizSync   28 - 80
+EndSection
+
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+Section "Device"
+    Identifier  "VESA"
+    Driver      "vesa" # do not remove vesa
+    #Option "RenderAccel" "on"
+    #Option "XAANoOffscreenPixmaps"
+    #Option "BusType" "PCI"
+    #Option "ColorTiling" "on"
+    #Option "EnablePageFlip" "on"
+    # UseEvents is causing segmentation faults with
+    # NVIDIA 6xxx, 7xxx and >=275.xx.xx drivers
+    #Option "UseEvents" "True"
+EndSection
+
+
+# **********************************************************************
+# Screen sections.
+# **********************************************************************
+
+Section "Screen"
+
+# The Identifier, Device and Monitor lines must be present
+
+    Identifier  "Screen 1"
+    Device      "VESA"
+    Monitor     "Generic Monitor"
+    #Option "AddARGBGLXVisuals" "true"
+
+# The favoured Depth and/or Bpp may be specified here
+
+    DefaultDepth 24
+
+    SubSection "Display"
+        Depth           8
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           16
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+    SubSection "Display"
+        Depth           24
+        ViewPort        0 0
+        #Modes          "1024x768" "800x600" "640x480"
+    EndSubsection
+
+
+EndSection
+
+
+Section "ServerLayout"
+# The Identifier line must be present
+
+    Identifier  "Main Layout"
+    Screen 0    "Screen 1"
+    InputDevice "Mouse1" "CorePointer"
+    #InputDevice "Synaptics1" "SendCoreEvents"
+
+EndSection
+
+Section "DRI"
+    Mode 0666
+EndSection
+
+Section "Extensions"
+   #Option "Composite" "Enable"
+EndSection
+EOF
+    fi
+
+    mv -f /etc/X11/xorg.conf /etc/X11/xorg.conf.old
+    /usr/sbin/x-setup-configuration
+
+    echo "Note: you may want to look to /etc/X11/xorg.conf.d (if it exists), too."
+}
+
+function xorg_backup
+{
+    is_root || return
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.BKUP already exists, so new backup wasn't made - aborting."
+        echo "Now off we go to edit the file...."
+        return
+    elif [[ -e /etc/X11/xorg.conf.d.BKUP ]]; then
+        echo "/etc/X11/xorg.conf.d.BKUP backup already exists, so new backup wasn't made - aborting."
+        return
+    fi
+
+    # Delete backup file. If there's no xorg.conf, no stale xorg.conf.BKUP will be kept.
+    # So xorg_restore will not made new (unexpected) xorg.conf from xorg.conf.BKUP.
+    rm -f /etc/X11/xorg.conf.BKUP
+    if [[ -f /etc/X11/xorg.conf ]]; then
+	echo "Making backup of xorg.conf as /etc/X11/xorg.conf.BKUP"
+	cp /etc/X11/xorg.conf /etc/X11/xorg.conf.BKUP
+    else
+	echo "There's no /etc/X11/xorg.conf so it couldn't be backed up."
+    fi
+
+    if [[ -e /etc/X11/xorg.conf.d ]]; then
+	echo "Making backup of /etc/X11/xorg.conf.d/*"
+	if [[ ! -d /etc/X11/xorg.conf.d ]]; then
+	    echo "!!!"
+	    echo "/etc/X11/xorg.conf.d is not a directory!"
+	    return
+	fi
+        mkdir -p /etc/X11/xorg.conf.d.BKUP
+        rm -f /etc/X11/xorg.conf.d.BKUP/* # dotfiles and subdirectories (who keeps them there?!) are left untouched
+        cp /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf.d.BKUP/ # and not copied (that's fine)
+        echo "/etc/X11/xorg.conf.d/* files are backed up in /etc/X11/xorg.conf.d.BKUP/"
+    else
+	echo "There's no /etc/X11/xorg.conf.d (directory) so it couldn't be backed up."
+    fi
+
+    echo ""
+    echo "INTEL graphics users please read the url below before proceding"
+    echo ""
+    echo "http://gentoo-wiki.com/HOWTO_Intel_Onboard_Graphics_Notebooks_Native_Resolution"
+}
+
+function xorg_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /etc/X11/xorg.conf and /etc/X11/xorg.conf.d/*.conf."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /etc/X11/xorg.conf.BKUP ]]; then
+        echo "xorg.conf backup (/etc/X11/xorg.conf.BKUP) exists, whew!"
+        cp /etc/X11/xorg.conf.BKUP /etc/X11/xorg.conf
+        echo ""
+        echo "The original xorg.conf has been restored"
+    else
+        echo "UH OH!! The backup /etc/X11/xorg.conf.BKUP hasn't been made."
+        echo "If you think you need the file, don't panic, you can copy it from the Live DVD/CD."
+    fi
+
+    echo ""
+
+    if [[ -d /etc/X11/xorg.conf.d.BKUP ]] \
+	&& (shopt -s nullglob; f=(/etc/X11/xorg.conf.d.BKUP/*.conf); [[ ${#f[*]} -ne 0 ]] )
+    then
+        echo "The backup /etc/X11/xorg.conf.d.BKUP (directory) exists and contails .conf files."
+        mkdir -p /etc/X11/xorg.conf.d
+	# similar notes as for xorg_backup, but files like .disabled are not removed
+        rm -f /etc/X11/xorg.conf.d/*.conf
+        cp /etc/X11/xorg.conf.d.BKUP/* /etc/X11/xorg.conf.d/
+        echo "Your settings are now restored to /etc/X11/xorg.conf.d/."
+    fi
+}
+
+function grub_backup
+{
+    is_root || return
+
+    echo "Note: to modify GRUB configuration, you should edit /etc/default/grub"
+    echo " or a file in /etc/grub.d and then run grub-mkconfig -o /boot/grub/grub.cfg"
+    echo " (/boot/grub/grub.cfg shouldn't be edited by hand)."
+    echo ""
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]; then
+        echo "grub.cfg backup already exists, so the new one wasn't made."
+        echo "Now off we go to edit the file...."
+    else
+	echo "Making backup of grub.cfg as /boot/grub/grub.cfg.BKUP"
+        cp /boot/grub/grub.cfg /boot/grub/grub.cfg.BKUP
+        echo ""
+    fi
+}
+
+function grub_restore
+{
+    is_root || return
+
+    echo "Are you sure? This will replace your /boot/grub/grub.cfg."
+    echo "[Y/n]"
+    local reply
+    read reply
+    if [[ $reply != "" && $reply != "y" && $reply != "Y" ]]; then
+        echo "OK, aborting."
+        return
+    fi
+
+    if [[ -f /boot/grub/grub.cfg.BKUP ]]
+    then
+        echo "grub.cfg backup (/boot/grub/grub.cfg.BKUP) exists, whew!"
+        cp /boot/grub/grub.cfg.BKUP /boot/grub/grub.cfg
+        echo ""
+        echo "The original grub.cfg has been restored"
+    else
+        echo "UH OH!! The backup script /boot/grub/grub.cfg.BKUP hasn't been made."
+        echo "Don't panic, you can use the Sabayon installer to repair GRUB."
+    fi
+}
+
+function horner
+{
+
+# Quick system info gatherer written for Sabayon GNU/Linux
+#(http://sabayonlinux.org)
+# Copyright 2008 Richard Edward Horner
+# Last modified 2008-11-26
+# Please send all comments, suggestions, bugs and patches to (rich AT
+#richhorner DOT com)
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+HOSTNAME=`hostname`
+RELEASE=`cat /etc/sabayon-release`
+CPU=`uname -p`
+KERNEL=`uname -r`
+KERN_ARCH=`uname -m`
+DISK=`df -lT --exclude-type=tmpfs --exclude-type=rootfs | awk 'BEGIN { total = 0; used = 0 } { if (NR > 1) { total += $3; used += $4 } } END { printf "%.1f/%.1fGB", used / 1000000, total / 1000000 }'`
+MEMORY=`cat /proc/meminfo | awk '{ if ($1 == "MemTotal:") { memtot = $2/1000 } else if ($1 == "MemFree:") { memfree = $2/1000 } } END { printf "%d/%dM", memfree, memtot }'`
+DAYS=`cat /proc/uptime | awk '{ printf "%.1f", $1/86400 }'`
+PROCS=`ps aux | awk 'END { print NR - 2 }'`
+RENDERER=`glxinfo | awk -F : '{ if ($1 == "OpenGL renderer string") print $2 }'`
+
+echo "Sysinfo for '$HOSTNAME': $RELEASE with $KERN_ARCH kernel $KERNEL
+on $CPU, HD: $DISK, MEM: $MEMORY, Renderer: $RENDERER, $PROCS procs,
+up $DAYS days"
+
+}
+
+# echo -e "\a[pastebunz debug ON]" >&2;
+# function pastebunz { sed 's/^/[pb] '/ | less; }
+
+# pastebunz seems to have some limit on max pasted lines, so this would be handy...
+function files_pastebin_linelimit
+{
+    # args: limit file_to_pastebin [file_to_pastebin] ...
+    # example: file_pastebin_linelimit 30 file1 "file name2" file3
+    # first arg: 0 means no limit
+    # By Enlik <sn at ubucentrum.net>
+    local TMPFILE=~/newbietmp
+    local LINESLIMIT
+    local LLIMIT_H
+
+    if [[ $# -le 1 ]]; then
+        echo "Error: no files to paste (in files_pastebin_linelimit)." >&2
+        return 2
+    fi
+
+    let LINESLIMIT=$1
+    shift
+    # If there is a limit of lines, we need to make space for file name and blank
+    # lines to be pasted. Otherwise we have as much space as we want.
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        LLIMIT_H="+1"
+    else
+        LLIMIT_H=$(( LINESLIMIT - 3 ))
+    fi
+
+    >"$TMPFILE" || {
+        echo "Oh no! I can't create temporary file... Aborting." >&2
+        return 3
+    }
+
+    for file in "$@"; do
+        echo " --- file: $file ---"
+        echo " "
+        if [[ -r $file ]]; then
+            # This tail guarantees that LAST file name is visible (unless the limit is really small, <= 2 lines)
+            # (previous one(s) can be wiped by tail due to limit of lines).
+            # The file name is always visible if there's only one specified
+            # as argument (unless the limit value is really small, as above).
+            # All file names are always visible if there's no limit
+            # of lines, or the limit is big enough.
+            cat "$file" 2>&1 | tail -n $LLIMIT_H
+    elif [[ -e $file ]]; then
+	    echo "THIS FILE COULDN'T BE READ."
+	else
+	    echo "THIS FILE DOESN'T EXIST."
+	fi
+        echo " "
+    done >> "$TMPFILE"
+    if [[ $LINESLIMIT -eq 0 ]]; then
+        cat "$TMPFILE" | pastebunz
+    else
+        tail -n $LINESLIMIT "$TMPFILE" | pastebunz
+    fi
+    echo "** Please see the link above! **"
+
+    rm "$TMPFILE"
+    return 0
+}
+
+function files_pastebin
+{
+    files_pastebin_linelimit 0 "$@"
+}
+
+function system_pastebin
+{
+    echo -n "Please wait, it is going to take a while..."
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+        return 1
+    }
+
+    echo "
+    sh /sbin/logscript.sh
+    " >> "$PASTE_TMP"
+    sh "/sbin/logscript.sh" >> "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg0log_pastebin
+{
+    tail -n 150 /var/log/Xorg.0.log
+    files_pastebin_linelimit 150 /var/log/Xorg.0.log
+}
+
+function xsessionerrors_pastebin
+{
+    cat "$HOMEDIR/.xsession-errors" | tail -n 10
+    files_pastebin_linelimit 150 "$HOMEDIR/.xsession-errors"
+    if [[ $USER = "root" ]]; then
+        echo
+        echo "Notice: root's .xsession-errors file has been pasted."
+        echo "To get .xsession-errors from your regular account on which"
+        echo "you are logged using GDM, KDM or so (which is probably what you want),"
+        echo "run this script as that user, not root, or pastebin .xsession-errors"
+        echo "from YOUR home directory manually."
+        echo
+    fi
+}
+
+function dmesg_pastebin
+{
+    cat /var/log/dmesg
+    files_pastebin_linelimit 150 /var/log/dmesg
+}
+
+function grub_pastebin
+{
+    cat /boot/grub/grub.cfg
+    files_pastebin /boot/grub/grub.cfg
+}
+
+function fdisk_pastebin
+{
+    is_root || return # fdisk -l
+
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    fdisk -l
+    ";
+    fdisk -l;
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function messages_pastebin
+{
+    tail -n 150 /var/log/messages
+    files_pastebin_linelimit 150 /var/log/messages
+}
+
+function kdm_pastebin
+{
+    cat /var/log/kdm.log
+    files_pastebin_linelimit 150 /var/log/kdm.log
+}
+
+function rclog_pastebin
+{
+    if [[ -f /var/log/rc.log ]]; then
+        cat /var/log/rc.log | tail -n 10
+        files_pastebin_linelimit 150 /var/log/rc.log
+    else
+        echo "You Don't Have rc.log enabled in your /etc/rc.log"
+        echo " To enable, edit /etc/rc.log change NO to YES for rc_logger= "
+        echo ""
+    fi
+}
+
+function rcupdate_pastebin
+{
+    local PASTE_TMP=/tmp/sabutil-tmp
+
+    >"$PASTE_TMP" || {
+	echo "Oh no! I can't create temporary file... Aborting."
+	return 1
+    }
+
+    (
+    echo "
+    rc-update show
+    ";
+    rc-update show
+    ) > "$PASTE_TMP"
+
+    cat "$PASTE_TMP"
+    cat "$PASTE_TMP" | pastebunz
+    echo "*** Please see the link above. ***"
+    rm "$PASTE_TMP"
+}
+
+function xorg_pastebin
+{
+    echo "These files will be pasted (don't worry if any of them don't exist):"
+    ls -l /etc/X11/xorg.conf /etc/X11/xorg.conf.d/*
+    files_pastebin /etc/X11/xorg.conf.d/* /etc/X11/xorg.conf
+}
+
+function xorg_edit
+{
+    is_root &> /dev/null || echo "You are not root. You will only be able to view files."
+
+    local xorgfiles=() file
+    if (shopt -s nullglob; f=(/etc/X11/xorg.conf.d/*.conf); [[ ${#f[*]} -ne 0 ]] ); then
+	xorgfiles=( /etc/X11/xorg.conf.d/* ) # let's put all non-dot files; warning for non-conf is below
+    fi
+
+    if [[ -f /etc/X11/xorg.conf ]]; then
+            xorgfiles+=( /etc/X11/xorg.conf )
+    fi
+
+    if [[ ${#xorgfiles[*]} -eq 0 ]]; then
+        echo "I can't find any Xorg configuration files."
+        echo "There's no /etc/X11/xorg.conf or .conf files in /etc/X11/xorg.conf.d/ directory."
+        echo "Xorg uses autodected settings."
+    else
+        echo "These files affect your Xorg configuration."
+        echo "See http://fedoraproject.org/wiki/Input_device_configuration#xorg.conf.d for more informations."
+        echo "Select a file to edit or type q and press Enter to quit."
+        select file in "${xorgfiles[@]}"; do
+            if [[ -n $file ]]; then
+            # Not sure about files that don't start with a number and a hyphen - are they used?
+                if [[ ${file##*.} != "conf" ]]; then
+                    echo "Warning: this file has no .conf suffix and thus will be ignored by Xorg."
+                    press_enter
+                fi
+                nano -w "$file"
+                echo "Select a file to edit or type q and press Enter to quit."
+            elif [[ $REPLY = "q" || $REPLY = "Q" ]]; then
+                break
+            fi
+        done
+    fi
+}
+
+clear
+
+if [[ $1 = "menu" ]]; then
+    if [[ $EUID -ne 0 ]]; then
+        echo "This script should be run as root, or by someone in the root group. Some commands will not work for you." 1>&2
+	echo ""
+    fi
+    menu
+elif [[ $1 = "--help" || $1 = "-h" ]]; then
+    echo "usage:"
+    echo "$0 - will print some basic system infos"
+    echo "$0 menu - will show you menu"
+else
+    horner
+    echo ""
+    echo "Specify --help or -h to get help."
+ fi