summaryrefslogtreecommitdiff
path: root/sys-fs/zfs-utils
diff options
context:
space:
mode:
Diffstat (limited to 'sys-fs/zfs-utils')
-rw-r--r--sys-fs/zfs-utils/files/zfs-conf.d109
-rw-r--r--sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild2
2 files changed, 1 insertions, 110 deletions
diff --git a/sys-fs/zfs-utils/files/zfs-conf.d b/sys-fs/zfs-utils/files/zfs-conf.d
deleted file mode 100644
index af3ff9da..00000000
--- a/sys-fs/zfs-utils/files/zfs-conf.d
+++ /dev/null
@@ -1,109 +0,0 @@
-# OpenZFS userland configuration.
-
-# NOTE: This file is intended for sysv init and initramfs.
-# Changing some of these settings may not make any difference on
-# systemd-based setup, e.g. setting ZFS_MOUNT=no will not prevent systemd
-# from launching zfs-mount.service during boot.
-# See: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=901436
-
-# To enable a boolean setting, set it to yes, on, true, or 1.
-# Anything else will be interpreted as unset.
-
-# Run `zfs load-key` during system start?
-ZFS_LOAD_KEY='yes'
-
-# Run `zfs unload-key` during system stop?
-ZFS_UNLOAD_KEY='no'
-
-# Run `zfs mount -a` during system start?
-ZFS_MOUNT='yes'
-
-# Run `zfs unmount -a` during system stop?
-ZFS_UNMOUNT='no'
-
-# Run `zfs share -a` during system start?
-# nb: The shareiscsi, sharenfs, and sharesmb dataset properties.
-ZFS_SHARE='yes'
-
-# Run `zfs unshare -a` during system stop?
-ZFS_UNSHARE='yes'
-
-# By default, a verbatim import of all pools is performed at boot based on the
-# contents of the default zpool cache file. The contents of the cache are
-# managed automatically by the 'zpool import' and 'zpool export' commands.
-#
-# By setting this to 'yes', the system will instead search all devices for
-# pools and attempt to import them all at boot, even those that have been
-# exported. Under this mode, the search path can be controlled by the
-# ZPOOL_IMPORT_PATH variable and a list of pools that should not be imported
-# can be listed in the ZFS_POOL_EXCEPTIONS variable.
-#
-# Note that importing all visible pools may include pools that you don't
-# expect, such as those on removable devices and SANs, and those pools may
-# proceed to mount themselves in places you do not want them to. The results
-# can be unpredictable and possibly dangerous. Only enable this option if you
-# understand this risk and have complete physical control over your system and
-# SAN to prevent the insertion of malicious pools.
-ZPOOL_IMPORT_ALL_VISIBLE='no'
-
-# Specify specific path(s) to look for device nodes and/or links for the
-# pool import(s). See zpool(8) for more information about this variable.
-# It supersedes the old USE_DISK_BY_ID which indicated that it would only
-# try '/dev/disk/by-id'.
-# The old variable will still work in the code, but is deprecated.
-#ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:/dev/disk/by-id"
-
-# List of pools that should NOT be imported at boot
-# when ZPOOL_IMPORT_ALL_VISIBLE is 'yes'.
-# This is a space separated list.
-#ZFS_POOL_EXCEPTIONS="test2"
-
-# Should the datasets be mounted verbosely?
-# A mount counter will be used when mounting if set to 'yes'.
-VERBOSE_MOUNT='no'
-
-# Should we allow overlay mounts?
-# This is standard in Linux, but not ZFS which comes from Solaris where this
-# is not allowed).
-DO_OVERLAY_MOUNTS='no'
-
-# Any additional option to the 'zfs import' commandline?
-# Include '-o' for each option wanted.
-# You don't need to put '-f' in here, unless you want it ALL the time.
-# Using the option 'zfsforce=1' on the grub/kernel command line will
-# do the same, but on a case-to-case basis.
-ZPOOL_IMPORT_OPTS=""
-
-# Full path to the ZFS cache file?
-# See "cachefile" in zpool(8).
-# The default is "/etc/zfs/zpool.cache".
-#ZPOOL_CACHE="/etc/zfs/zpool.cache"
-#
-# Setting ZPOOL_CACHE to an empty string ('') AND setting ZPOOL_IMPORT_OPTS to
-# "-c /etc/zfs/zpool.cache" will _enforce_ the use of a cache file.
-# This is needed in some cases (extreme amounts of VDEVs, multipath etc).
-# Generally, the use of a cache file is usually not recommended on Linux
-# because it sometimes is more trouble than it's worth (laptops with external
-# devices or when/if device nodes changes names).
-#ZPOOL_IMPORT_OPTS="-c /etc/zfs/zpool.cache"
-#ZPOOL_CACHE=""
-
-# Any additional option to the 'zfs mount' command line?
-# Include '-o' for each option wanted.
-MOUNT_EXTRA_OPTIONS=""
-
-# Build kernel modules with the --enable-debug switch?
-# Only applicable for Debian GNU/Linux {dkms,initramfs}.
-ZFS_DKMS_ENABLE_DEBUG='no'
-
-# Build kernel modules with the --enable-debuginfo switch?
-# Only applicable for Debian GNU/Linux {dkms,initramfs}.
-ZFS_DKMS_ENABLE_DEBUGINFO='no'
-
-# Keep debugging symbols in kernel modules?
-# Only applicable for Debian GNU/Linux {dkms,initramfs}.
-ZFS_DKMS_DISABLE_STRIP='no'
-
-# Optional arguments for the ZFS Event Daemon (ZED).
-# See zed(8) for more information on available options.
-#ZED_ARGS="-M"
diff --git a/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild b/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild
index 61e6b4c1..38c87723 100644
--- a/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild
+++ b/sys-fs/zfs-utils/zfs-utils-2.1.7-r2.ebuild
@@ -98,7 +98,7 @@ src_install() {
bashcomp_alias zfs zpool
dodir etc/conf.d
insinto etc/conf.d
- newins "${FILESDIR}"/zfs-conf.d zfs
+ doins "${S}"/etc/default/zfs
use pam && { rm -rv "${ED}/unwanted_files" || die ; }
use test-suite || { rm -r "${ED}/usr/share/zfs" || die ; }
}